Snap-In Aluminum Electrolytic Capacitors ALC10 Series, +85C Overview Applications KEMET's ALC10 Series of snap-in capacitors covers a wide range of case sizes and voltage ratings. The ALC10 Series is designed for high voltage, up to 550 VDC, high ripple current applications and features surge voltage capability and very longlife performance. KEMET's ALC10 Series of capacitors is ideally suited for industrial and commercial applications demanding high reliability and long life expectancy. Typical applications include frequency converters, uninterruptible power supply (UPS) systems and switch mode power supplies (SMPS). Benefits * * * * * * Compact size Long life, up to 18,000 hours at +85C (VR, IR applied) High ripple current High Voltage Excellent surge voltage capability Optimized designs available upon request Part Number System ALC10 A 392 BB 040 Series Termination Capacitance Code (F) Size Code Voltage (VDC) Snap-In type Aluminum Electrolytic See Termination Table First 2 digits equals first 2 significant figures, 3rd digit is the number of additional zeros. See Dimension Table 035 = 35 040 = 40 063 = 63 100 = 100 200 = 200 250 = 250 350 = 350 400 = 400 450 = 450 500 = 500 550 = 550 One world. One KEMET (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com A4020_ALC10 * 1/20/2015 1 Snap-In Aluminum Electrolytic Capacitors - ALC10 Series, +85C Performance Characteristics Item Performance Characteristics Capacitance Range Rated Voltage 56 - 82,000 F 35 - 550 VDC Operating Temperature -40 to +85C Capacitance Tolerance 20% at 100 Hz / +20C Operational Lifetime End of Life Requirement Shelf Life Leakage Current D (mm) Rated Voltage and Ripple Current at +85C (hours) Rated Voltage at +85C (hours) 25 10,000 16,000 30 13,000 21,000 35 15,000 24,000 40 - 50 18,000 29,000 C/C < 10%, ESR < 2 x initial ESR value, IL < initial specified limit 2,000 hours at +85C or 30,000 hours at +40C 0 VDC I = 0.006 CV or 6,000 (A, whichever is smaller) C = rated capacitance (F), V = rated voltage (VDC). Voltage applied for 5 minutes at +20C. Procedure D 40 mm 0.75 mm displacement amplitude or 10 g maximum acceleration. Vibration applied for three 2-hour sessions at 10 - 500 Hz (Capacitor clamped by body). D > 40 mm 0.35 mm displacement amplitude or 5 g maximum acceleration. Vibration applied for three 0.5-hour sessions at 10 - 55 Hz (Capacitor clamped by body). Vibration Test Specifications Standards Requirements No leakage of electrolyte or other visible damage. Deviations in capacitance and tan from initial measurements must not exceed: C/C < 5% IEC 60384-4 long life grade 40/85/56 Surge Voltage Condition 30s Surge followed by a no load period of 330s, 1,000 cycles at +85C 500 ms surge, 100 cycles at 20C, occurring randomly throughout the life of the capacitor Voltage (VDC) 40 63 100 200 250 350 400 450 500 550 46 72.5 115 230 288 385 440 495 550 605 350 400 500 520 550 600 620 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com A4020_ALC10 * 1/20/2015 2 Snap-In Aluminum Electrolytic Capacitors - ALC10 Series, +85C Test Method & Performance Endurance Life Test Conditions Performance Temperature +105C Test Duration 2,000 hours Ripple Current Voltage Performance Rated ripple current in specified table The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor The following specifications will be satisfied when the capacitor is tested at +20C: Capacitance Change Equivalent Series Resistance Leakage Current 160 V Within 15% of the initial value 160 V Within 10% of the initial value Does not exceed 200% of the initial value Does not exceed leakage current limit Dimensions - Millimeters Size Code BB BC BD CB CC CD CE CF DB DC DD DE DF DG DH DL EB EC ED EE EF EG Dimensions in mm D L -0/+1 2 Approximate Weight Grams 25 25 25 30 30 30 30 30 35 35 35 35 35 35 35 35 40 40 40 40 40 40 30 35 40 30 35 40 45 50 30 35 40 45 50 55 60 80 30 35 40 45 50 55 28 30 35 35 40 45 50 55 42 50 55 65 70 75 80 105 49 57 65 80 82 95 Note: Dimensions include sleeving Size Code EH EJ EL EP FB FC FD FE FF FG FH FL FP KB KC KD KE KF KG KH KL KP Dimensions in mm D L -0/+1 2 Approximate Weight Grams 40 40 40 40 45 45 45 45 45 45 45 45 45 50 50 50 50 50 50 50 50 50 60 70 80 105 30 35 40 45 50 55 60 80 105 30 35 40 45 50 55 60 80 105 98 113 131 170 62 72 82 92 103 113 123 164 215 75 88 100 113 126 138 151 201 264 Note: Dimensions include sleeving (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com A4020_ALC10 * 1/20/2015 3 Snap-In Aluminum Electrolytic Capacitors - ALC10 Series, +85C Termination Tables Termination Code A D F C E 25 * * * 30 * * * 35 * * 40 * * G H * * * * * * * * 45 * * * * 50 * * * * Diameter (mm) Mounting: These capacitors are designed to be mounted by their terminations alone and may be used in any position. Dummy pins must be isolated on 4 and 5 pin styles. Termination Code Termination Style LL 1 Standard Termination Option A 2 Pin 6.3 G (D 45) 5 Pin 6.3 Other Termination Options D 2 Pin 4 F 3 Pin 4 C 4 Pin 6.3 E 4 Pin 4 H 5 Pin 4 Dimensions in mm Style A/D L Style F LL LL D - + Style C/E Style G/H LL LL + + (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com A4020_ALC10 * 1/20/2015 4 Snap-In Aluminum Electrolytic Capacitors - ALC10 Series, +85C Shelf Life The capacitance, ESR and impedance of a capacitor will not change significantly after extended storage periods, however the leakage current will very slowly increase. KEMET products are particularly stable and allow a shelf life in excess of three years at 40C. See sectional specification under each product series for specific data. Re-age (Reforming) Procedure Apply the rated voltage to the capacitor at room temperature for a period of one hour, or until the leakage current has fallen to a steady value below the specified limit. During re-aging a maximum charging current of twice the specified leakage current or 5 mA (whichever is greater) is suggested. Reliability The reliability of a component can be defined as the probability that it will perform satisfactorily under a given set of conditions for a given length of time. In practice, it is impossible to predict with absolute certainty how any individual component will perform; thus, we must utilize probability theory. It is also necessary to clearly define the level of stress involved (e.g. operating voltage, ripple current, temperature and time). Finally, the meaning of satisfactory performance must be defined by specifying a set of conditions which determine the end of life of the component. Reliability as a function of time, R(t), is normally expressed as: R(t)=e-t where R(t) is the probability that the component will perform satisfactorily for time t, and is the failure rate. Failure Rate The failure rate is the number of components failing per unit time. The failure rate of most electronic components follows the characteristic pattern: * Early failures are removed during the manufacturing process. * The operational life is characterized by a constant failure rate. * The wear out period is characterized by a rapidly increasing failure rate. The failures in time (FIT) are given with a 60% confidence level for the various type codes. By convention, FIT is expressed as 1 x 10-9 failures per hour. Failure rate is also expressed as a percentage of failures per 1,000 hours. e.g., 100 FIT = 1 x 10-7 failures per hour = 0.01%/1,000 hours End of Life Definition Catastrophic Failure: short circuit, open circuit or safety vent operation Parametric Failure: * Change in capacitance > 10% * Leakage current > specified limit * ESR > 2 x initial ESR value (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com A4020_ALC10 * 1/20/2015 5 Snap-In Aluminum Electrolytic Capacitors - ALC10 Series, +85C MTBF The mean time between failures (MTBF) is simply the inverse of the failure rate. MTBF= 1/ Failure Rate early failures wear out operational life Time The failure rate is derived from our periodic test results. The failure rate (R) is, therefore, only given at test temperature for life tests. An estimation is also given at 40C. The expected failure rate for this capacitor range is based on our periodic test results for capacitors with structural similarity. Failure rate is frequently quoted in FIT (Failures In Time) where 1 FIT = 1 x 10-9 failures per hour. Failure rate per hour includes both catastrophic and parametric failures. Ta 85C 40C Failure Rate per Hour 250 FIT 12 FIT Environmental Compliance As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental effects of both our capacitors and their production. In Europe (RoHS Directive) and in some other geographical areas like China, legislation has been put in place to prevent the use of some hazardous materials, such as lead (Pb), in electronic equipment. All products in this catalog are produced to help our customers' obligations to guarantee their products and fulfill these legislative requirements. The only material of concern in our products has been lead (Pb), which has been removed from all designs to fulfill the requirement of containing less than 0.1% of lead in any homogeneous material. KEMET will closely follow any changes in legislation world wide and makes any necessary changes in its products, whenever needed. Some customer segments such as medical, military and automotive electronics may still require the use of lead in electrode coatings. To clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels for RoHS compatible capacitors. Because of customer requirements, there may appear additional markings such as LF = Lead Free or LFW = Lead Free Wires on the label. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com A4020_ALC10 * 1/20/2015 6 Snap-In Aluminum Electrolytic Capacitors - ALC10 Series, +85C Table 1 - Ratings & Part Number Reference VDC 35 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 200 200 200 200 200 200 VDC Rated Capacitance 100 Hz 20C (F) 33000 3900 4700 5600 5600 6800 8200 10000 12000 12000 15000 18000 18000 22000 27000 33000 47000 82000 2200 2700 3300 3300 4700 5600 6800 6800 8200 8200 10000 10000 12000 15000 18000 27000 39000 1000 1200 1500 1500 1800 2200 2700 2700 3300 3300 3300 3900 4700 4700 5600 6800 8200 12000 18000 330 390 470 470 560 680 Rated Capacitance Size Code Case Size D x L (mm) EF BB BC CB BD CC CD DC CF DD EB DF EC ED EF EH EL EP BB BC CB BD CC CD DC CF DD EB DF EC ED EF EH EL EP BB BC CB BD CC CD DC EB CF DD EC ED DF EE EF EG EH EL EP BB BC CB BD CC CD 40 x 50 25 x 30 25 x 35 30 x 30 25 x 40 30 x 35 30 x 40 35 x 35 30 x 50 35 x 40 40 x 30 35 x 50 40 x 35 40 x 40 40 x 50 40 x 60 40 x 80 40 x 105 25 x 30 25 x 35 30 x 30 25 x 40 30 x 35 30 x 40 35 x 35 30 x 50 35 x 40 40 x 30 35 x 50 40 x 35 40 x 40 40 x 50 40 x 60 40 x 80 40 x 105 25 x 30 25 x 35 30 x 30 25 x 40 30 x 35 30 x 40 35 x 35 40 x 30 30 x 50 35 x 40 40 x 35 40 x 40 35 x 50 40 x 45 40 x 50 40 x 55 40 x 60 40 x 80 40 x 105 25 x 30 25 x 35 30 x 30 25 x 40 30 x 35 30 x 40 Size Code Case Size Ripple Current 100 Hz 85C (A) 7.16 2.33 2.77 2.74 3.14 3.26 3.70 3.69 4.59 4.14 4.42 5.23 4.88 5.81 7.23 8.74 10.96 12.63 2.13 2.43 2.77 2.73 3.24 3.56 3.95 4.07 4.31 3.95 4.85 4.58 5.42 7.02 8.54 10.53 12.23 1.67 1.93 2.30 2.27 2.64 3.05 3.57 3.72 4.05 4.11 4.09 4.88 5.23 5.60 6.41 6.61 7.36 9.14 11.34 1.18 1.36 1.58 1.56 1.82 2.10 10 kHz 85C (A) 10.03 2.53 3.01 2.98 3.42 3.55 4.03 4.01 4.99 4.50 4.51 5.69 4.97 5.92 7.36 8.91 11.17 13.44 2.37 2.70 3.08 3.04 3.61 3.96 4.40 4.53 4.80 4.03 5.40 4.67 5.55 7.18 8.75 10.78 13.51 2.04 2.36 2.81 2.78 3.23 3.73 4.37 3.88 4.95 5.03 4.24 5.08 6.40 5.83 6.68 6.84 7.61 9.45 12.61 1.63 1.87 2.18 2.15 2.51 2.89 Ripple Current ESR Maximum Impedance Maximum 100 Hz 20C (m) 42 125 99 115 85 90 77 86 59 75 89 55 78 62 43 33 23 18 149 128 112 112 91 83 75 75 69 82 64 80 64 44 35 24 19 243 203 163 163 137 113 92 121 76 76 106 85 55 70 59 53 44 31 19 486 412 343 343 288 238 10 kHz 20C (m) 38 103 81 94 70 74 63 71 48 62 79 45 70 56 38 30 21 17 118 101 88 88 72 66 59 59 55 72 51 72 57 39 31 21 17 182 152 122 122 103 85 69 104 57 57 92 74 41 61 51 46 39 27 17 340 288 240 240 202 167 ESR Impedance Part Number ALC10(1)333EF035 ALC10(1)392BB040 ALC10(1)472BC040 ALC10(1)562CB040 ALC10(1)562BD040 ALC10(1)682CC040 ALC10(1)822CD040 ALC10(1)103DC040 ALC10(1)123CF040 ALC10(1)123DD040 ALC10(1)153EB040 ALC10(1)183DF040 ALC10(1)183EC040 ALC10(1)223ED040 ALC10(1)273EF040 ALC10(1)333EH040 ALC10(1)473EL040 ALC10(1)823EP040 ALC10(1)222BB063 ALC10(1)272BC063 ALC10(1)332CB063 ALC10(1)332BD063 ALC10(1)472CC063 ALC10(1)562CD063 ALC10(1)682DC063 ALC10(1)682CF063 ALC10(1)822DD063 ALC10(1)822EB063 ALC10(1)103DF063 ALC10(1)103EC063 ALC10(1)123ED063 ALC10(1)153EF063 ALC10(1)183EH063 ALC10(1)273EL063 ALC10(1)393EP063 ALC10(1)102BB100 ALC10(1)122BC100 ALC10(1)152CB100 ALC10(1)152BD100 ALC10(1)182CC100 ALC10(1)222CD100 ALC10(1)272DC100 ALC10(1)272EB100 ALC10(1)332CF100 ALC10(1)332DD100 ALC10(1)332EC100 ALC10(1)392ED100 ALC10(1)472DF100 ALC10(1)472EE100 ALC10(1)562EF100 ALC10(1)682EG100 ALC10(1)822EH100 ALC10(1)123EL100 ALC10(1)183EP100 ALC10(1)331BB200 ALC10(1)391BC200 ALC10(1)471CB200 ALC10(1)471BD200 ALC10(1)561CC200 ALC10(1)681CD200 Part Number (1) Termination code: See Termination Tables for available options. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com A4020_ALC10 * 1/20/2015 7 Snap-In Aluminum Electrolytic Capacitors - ALC10 Series, +85C Table 1 - Ratings & Part Number Reference cont'd VDC 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 VDC Rated Capacitance 100 Hz 20C (F) 820 820 1000 1000 1000 1200 1200 1500 1500 1800 2200 3300 4700 5600 8200 220 270 330 330 330 470 560 680 680 680 820 820 1000 1000 1200 1200 1500 1800 1800 2200 3900 4700 5600 120 150 180 180 270 330 330 390 390 390 470 470 560 560 680 820 820 820 1000 1200 1800 2700 Rated Capacitance Size Code Case Size D x L (mm) DC EB CF DD EC DF ED DF EE EF EH EL EP FP KP BB BC CB BC BD CC CD DC CF EB DD ED DF EE DH EF EG DL EH EL EP FP KP BB BC BD CB CC CD EB CF DC EC DD ED DF EE EF DH EG EH DL EL EP FP 35 x 35 40 x 30 30 x 50 35 x 40 40 x 35 35 x 50 40 x 40 35 x 50 40 x 45 40 x 50 40 x 60 40 x 80 40 x 105 45 x 105 50 x 105 25 x 30 25 x 35 30 x 30 25 x 35 25 x 40 30 x 35 30 x 40 35 x 35 30 x 50 40 x 30 35 x 40 40 x 40 35 x 50 40 x 45 35 x 60 40 x 50 40 x 55 35 x 80 40 x 60 40 x 80 40 x 105 45 x 105 50 x 105 25 x 30 25 x 35 25 x 40 30 x 30 30 x 35 30 x 40 40 x 30 30 x 50 35 x 35 40 x 35 35 x 40 40 x 40 35 x 50 40 x 45 40 x 50 35 x 60 40 x 55 40 x 60 35 x 80 40 x 80 40 x 105 45 x 105 Size Code Case Size Ripple Current 100 Hz 85C (A) 2.43 3.06 2.76 2.81 3.43 3.06 4.02 3.70 4.61 5.27 6.29 7.83 8.08 8.51 9.17 0.97 1.13 1.33 1.34 1.31 1.67 1.91 2.22 2.29 2.79 2.55 3.80 3.26 4.33 3.76 4.94 5.29 4.60 5.92 7.33 7.78 8.22 8.63 0.83 0.99 1.13 1.11 1.41 1.65 2.02 1.92 1.82 2.33 2.07 2.69 2.80 3.04 3.46 3.40 3.84 3.99 3.90 4.95 6.14 7.00 10 kHz 85C (A) 3.35 3.63 3.80 3.87 3.99 4.01 4.69 5.10 5.38 6.15 7.43 9.17 11.73 12.16 11.76 1.41 1.65 1.94 1.95 1.91 2.43 2.78 3.23 3.34 3.56 3.72 4.91 4.75 5.58 5.48 6.37 6.58 6.69 7.34 9.49 11.71 12.11 12.03 1.75 2.07 2.37 2.19 2.65 3.07 3.97 3.65 3.07 4.50 3.47 5.22 4.80 5.88 6.65 5.50 7.16 7.67 6.40 9.20 10.73 11.44 Ripple Current ESR Maximum Impedance Maximum 100 Hz 20C (m) 198 178 163 163 153 135 124 110 101 84 67 46 45 42 33 727 593 486 490 486 343 288 238 238 187 198 153 163 126 140 104 89 100 74 57 46 42 38 1139 912 761 776 527 432 424 364 386 361 321 299 268 251 207 190 174 172 154 119 81 63 10 kHz 20C (m) 139 142 114 114 124 82 99 77 81 68 53 37 32 29 25 473 385 316 320 316 223 187 155 155 144 129 116 106 96 100 80 69 82 58 43 32 29 27 736 589 492 506 346 284 277 238 259 236 216 195 180 164 136 130 114 112 104 78 54 42 ESR Impedance Part Number ALC10(1)821DC200 ALC10(1)821EB200 ALC10(1)102CF200 ALC10(1)102DD200 ALC10(1)102EC200 ALC10(1)122DF200 ALC10(1)122ED200 ALC10(1)152DF200 ALC10(1)152EE200 ALC10(1)182EF200 ALC10(1)222EH200 ALC10(1)332EL200 ALC10(1)472EP200 ALC10(1)562FP200 ALC10(1)822KP200 ALC10(1)221BB250 ALC10(1)271BC250 ALC10(1)331CB250 ALC10(1)331BC250 ALC10(1)331BD250 ALC10(1)471CC250 ALC10(1)561CD250 ALC10(1)681DC250 ALC10(1)681CF250 ALC10(1)681EB250 ALC10(1)821DD250 ALC10(1)821ED250 ALC10(1)102DF250 ALC10(1)102EE250 ALC10(1)122DH250 ALC10(1)122EF250 ALC10(1)152EG250 ALC10(1)182DL250 ALC10(1)182EH250 ALC10(1)222EL250 ALC10(1)392EP250 ALC10(1)472FP250 ALC10(1)562KP250 ALC10(1)121BB350 ALC10(1)151BC350 ALC10(1)181BD350 ALC10(1)181CB350 ALC10(1)271CC350 ALC10(1)331CD350 ALC10(1)331EB350 ALC10(1)391CF350 ALC10(1)391DC350 ALC10(1)391EC350 ALC10(1)471DD350 ALC10(1)471ED350 ALC10(1)561DF350 ALC10(1)561EE350 ALC10(1)681EF350 ALC10(1)821DH350 ALC10(1)821EG350 ALC10(1)821EH350 ALC10(1)102DL350 ALC10(1)122EL350 ALC10(1)182EP350 ALC10(1)272FP350 Part Number (1) Termination code: See Termination Tables for available options. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com A4020_ALC10 * 1/20/2015 8 Snap-In Aluminum Electrolytic Capacitors - ALC10 Series, +85C Table 1 - Ratings & Part Number Reference cont'd VDC 350 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 VDC Rated Capacitance 100 Hz 20C (F) 3300 100 120 150 150 180 220 220 270 270 330 330 330 330 390 390 470 470 470 470 560 560 560 680 680 820 1000 1000 1500 2200 2700 68 100 120 120 150 150 150 180 220 220 220 270 270 270 270 330 330 330 330 390 390 470 470 470 560 560 680 820 1000 Rated Capacitance Size Code Case Size D x L (mm) KP BB BC CB BD CC CC CD DC EB DC CF DD EC DF ED DE DF ED EE DF DH EF DH EH DL DL EL EP FP KP BB BC CB BD BD CB CC CD DC CF EB CF DC DD EC CF DD DF ED DF EE DF DH EF DF EH DL EL EL 50 x 105 25 x 30 25 x 35 30 x 30 25 x 40 30 x 35 30 x 35 30 x 40 35 x 35 40 x 30 35 x 35 30 x 50 35 x 40 40 x 35 35 x 50 40 x 40 35 x 45 35 x 50 40 x 40 40 x 45 35 x 50 35 x 60 40 x 50 35 x 60 40 x 60 35 x 80 35 x 80 40 x 80 40 x 105 45 x 105 50 x 105 25 x 30 25 x 35 30 x 30 25 x 40 25 x 40 30 x 30 30 x 35 30 x 40 35 x 35 30 x 50 40 x 30 30 x 50 35 x 35 35 x 40 40 x 35 30 x 50 35 x 40 35 x 50 40 x 40 35 x 50 40 x 45 35 x 50 35 x 60 40 x 50 35 x 50 40 x 60 35 x 80 40 x 80 40 x 80 Size Code Case Size Ripple Current 100 Hz 85C (A) 7.54 0.77 0.90 1.04 1.06 1.20 1.31 1.41 1.61 1.85 1.73 1.82 1.84 2.29 2.19 2.62 2.40 2.62 2.74 3.00 2.57 3.01 3.41 2.90 3.99 3.70 3.98 5.00 5.79 6.56 7.11 0.69 0.88 1.00 1.01 1.12 1.10 1.17 1.36 1.56 1.61 1.77 1.76 1.68 1.78 2.07 1.91 2.20 2.41 2.47 2.60 2.70 2.43 2.95 3.08 2.70 3.56 3.61 4.47 4.95 10 kHz 85C (A) 11.57 1.60 1.87 2.03 2.18 2.36 2.47 2.74 2.88 3.67 2.92 3.42 3.27 4.21 3.96 4.86 4.10 4.41 5.21 5.49 4.04 5.11 6.19 4.73 7.14 6.09 6.32 8.82 10.16 10.90 11.13 1.50 1.90 2.03 2.18 2.35 2.12 2.38 2.76 2.89 3.27 3.68 3.43 2.91 3.27 4.22 3.54 3.68 4.38 4.91 4.41 5.53 4.03 5.12 6.25 4.74 7.04 6.09 8.78 9.32 Ripple Current ESR Maximum Impedance Maximum 100 Hz 20C (m) 54 1400 1166 950 935 791 650 648 547 441 461 438 449 378 377 312 360 321 230 258 278 264 216 232 177 181 112 120 99 77 66 1708 1167 989 973 785 805 792 661 559 540 517 446 470 458 427 373 364 373 348 240 293 252 270 243 266 202 190 138 114 10 kHz 20C (m) 36 943 785 645 630 536 400 440 376 284 320 299 309 252 226 203 246 223 156 168 180 184 141 142 114 127 77 78 68 53 45 1135 777 663 648 524 543 531 443 379 362 311 301 322 311 259 253 242 253 210 166 177 155 185 147 172 121 131 83 75 ESR Impedance Part Number ALC10(1)332KP350 ALC10(1)101BB400 ALC10(1)121BC400 ALC10(1)151CB400 ALC10(1)151BD400 ALC10(1)181CC400 ALC10(1)221CC400 ALC10(1)221CD400 ALC10(1)271DC400 ALC10(1)271EB400 ALC10(1)331DC400 ALC10(1)331CF400 ALC10(1)331DD400 ALC10(1)331EC400 ALC10(1)391DF400 ALC10(1)391ED400 ALC10(1)471DE400 ALC10(1)471DF400 ALC10(1)471ED400 ALC10(1)471EE400 ALC10(1)561DF400 ALC10(1)561DH400 ALC10(1)561EF400 ALC10(1)681DH400 ALC10(1)681EH400 ALC10(1)821DL400 ALC10(1)102DL400 ALC10(1)102EL400 ALC10(1)152EP400 ALC10(1)222FP400 ALC10(1)272KP400 ALC10(1)680BB450 ALC10(1)101BC450 ALC10(1)121CB450 ALC10(1)121BD450 ALC10(1)151BD450 ALC10(1)151CB450 ALC10(1)151CC450 ALC10(1)181CD450 ALC10(1)221DC450 ALC10(1)221CF450 ALC10(1)221EB450 ALC10(1)271CF450 ALC10(1)271DC450 ALC10(1)271DD450 ALC10(1)271EC450 ALC10(1)331CF450 ALC10(1)331DD450 ALC10(1)331DF450 ALC10(1)331ED450 ALC10(1)391DF450 ALC10(1)391EE450 ALC10(1)471DF450 ALC10(1)471DH450 ALC10(1)471EF450 ALC10(1)561DF450 ALC10(1)561EH450 ALC10(1)681DL450 ALC10(1)821EL450 ALC10(1)102EL450 Part Number (1) Termination code: See Termination Tables for available options. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com A4020_ALC10 * 1/20/2015 9 Snap-In Aluminum Electrolytic Capacitors - ALC10 Series, +85C Table 1 - Ratings & Part Number Reference cont'd VDC 450 450 450 450 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 VDC Rated Capacitance 100 Hz 20C (F) 1000 1200 1800 2200 56 68 82 82 100 100 120 150 180 180 180 220 220 270 270 330 330 390 390 470 560 680 680 1000 1500 1800 56 68 82 82 120 150 180 180 220 270 330 470 180 220 270 330 390 470 680 1000 1200 1500 1500 Rated Capacitance Size Code Case Size D x L (mm) EJ EP FP KP BB BC BD CB CB CC CC CD CF DC EB DD EC DF ED DF EE DH EF EH DL DL EL EP FP KP BB BC BD CB CC CD CF DC DD DF DH DL EB EC ED EE EF EH EL EP FP KP KP 40 X 70 40 x 105 45 x 105 50 x 105 25 x 30 25 x 35 25 x 40 30 x 30 30 x 30 30 x 35 30 x 35 30 x 40 30 x 50 35 x 35 40 x 30 35 x 40 40 x 35 35 x 50 40 x 40 35 x 50 40 x 45 35 x 60 40 x 50 40 x 60 35 x 80 35 x 80 40 x 80 40 x 105 45 x 105 50 x 105 25 X 30 25 X 35 25 X 40 30 X 30 30 X 35 30 X 40 30 X 50 35 X 35 35 X 40 35 X 50 35 X 60 35 X 80 40 X 30 40 X 35 40 X 40 40 X 45 40 X 50 40 X 60 40 X 80 40 X 105 45 X 105 50 X 105 50 X 105 Size Code Case Size Ripple Current 100 Hz 85C (A) 4.42 5.57 6.27 6.81 0.74 0.87 1.00 0.99 1.08 1.15 1.25 1.48 1.78 1.70 1.76 1.96 2.07 2.34 2.41 2.14 2.74 2.87 3.09 3.56 3.50 3.65 4.40 5.43 5.97 6.45 0.68 0.77 0.87 0.91 1.14 1.32 1.52 1.50 1.72 2.01 2.30 2.87 1.60 1.84 2.11 2.40 2.67 3.05 3.87 4.86 5.60 6.50 6.50 10 kHz 85C (A) 8.42 10.15 10.87 11.12 1.44 1.70 1.95 1.84 1.94 2.16 2.28 2.67 3.27 2.84 3.22 3.26 3.82 3.97 4.42 3.75 5.00 4.67 5.59 6.43 5.57 6.45 7.77 9.18 9.76 10.09 1.13 1.29 1.46 1.49 1.86 2.14 2.47 2.34 2.67 3.15 3.60 4.43 2.62 3.01 3.44 3.90 4.33 4.93 6.18 7.59 8.59 9.63 9.63 Ripple Current ESR Maximum Impedance Maximum 100 Hz 20C (m) 142 103 82 70 2365 1816 1507 1527 1000 1220 1052 895 699 728 699 622 571 505 466 492 405 355 345 285 250 244 200 140 110 94 6118 5038 4178 4196 2874 2302 1914 1940 1588 1290 1058 746 1936 1584 1290 1056 894 742 514 352 296 242 242 10 kHz 20C (m) 93 70 55 47 1642 1351 1120 1140 765 840 786 631 522 549 522 450 426 362 348 366 286 258 242 201 182 178 140 98 82 70 5330 4388 3640 3656 2506 2008 1670 1694 1388 1126 924 650 1688 1380 1124 920 780 648 450 308 258 212 212 ESR Impedance Part Number ALC10(1)102EJ450 ALC10(1)122EP450 ALC10(1)182FP450 ALC10(1)222KP450 ALC10(1)560BB500 ALC10(1)680BC500 ALC10(1)820BD500 ALC10(1)820CB500 ALC10(1)101CB500 ALC10(1)101CC500 ALC10(1)121CC500 ALC10(1)151CD500 ALC10(1)181CF500 ALC10(1)181DC500 ALC10(1)181EB500 ALC10(1)221DD500 ALC10(1)221EC500 ALC10(1)271DF500 ALC10(1)271ED500 ALC10(1)331DF500 ALC10(1)331EE500 ALC10(1)391DH500 ALC10(1)391EF500 ALC10(1)471EH500 ALC10(1)561DL500 ALC10(1)681DL500 ALC10(1)681EL500 ALC10(1)102EP500 ALC10(1)152FP500 ALC10(1)182KP500 ALC10(1)560BB550 ALC10(1)680BC550 ALC10(1)820BD550 ALC10(1)820CB550 ALC10(1)121CC550 ALC10(1)151CD550 ALC10(1)181CF550 ALC10(1)181DC550 ALC10(1)221DD550 ALC10(1)271DF550 ALC10(1)331DH550 ALC10(1)471DL550 ALC10(1)181EB550 ALC10(1)221EC550 ALC10(1)271ED550 ALC10(1)331EE550 ALC10(1)391EF550 ALC10(1)471EH550 ALC10(1)681EL550 ALC10(1)102EP550 ALC10(1)122FP550 ALC10(1)152KP550 ALC10(1)152KP550 Part Number (1) Termination code: See Termination Tables for available options. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com A4020_ALC10 * 1/20/2015 10 Snap-In Aluminum Electrolytic Capacitors - ALC10 Series, +85C Mechanical Data Polarity and Reversed Voltage Aluminium Electrolytic capacitors manufactured for use in DC applications contain an anode foil and a cathode foil. As such, they are polarized devices and must be connected with the +ve to the anode foil and the -ve to the cathode foil. If this were to be reversed then the electrolytic process that took place in forming the oxide layer on the anode would be recreated in trying to form an oxide layer on the cathode. In forming the cathode foil in this way, heat would be generated and gas given off within the capacitor, usually leading to catastrophic failure. The cathode foil already possesses a thin stabilized oxide layer. This thin oxide layer is equivalent to a forming voltage of approximately 2 V. As a result, the capacitor can withstand a voltage reversal of up to 2 V for short periods. Above this voltage, the formation process will commence. Aluminium Electrolytic capacitors can also be manufactured for use in intermittent AC applications by using two anode foils in place of one anode and one cathode. Mounting Position The capacitor can be mounted upright or inclined to a horizontal position. Insulating Resistance 100 M at 100 VDC across insulating sleeve. UL recognized sleeving is available for custom parts in this range, upon request. (UL No. E358957) Voltage Proof 2,500 VDC across insulating sleeve. Safety Vent A safety vent for overpressure is featured on either the base (opposing end to the terminals) or the side of the can. This appears in the form of a grooved section on the surface of the can, which is a weakened area and designed to relieve build-up of internal pressure due to overstress or catastrophic failure. Print Detail * * * * * * * KEMET Logo Rated capacitance Capacitance tolerance Rated voltage Climatic Category Date of manufacture & Batch No. Article code (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com A4020_ALC10 * 1/20/2015 11 Snap-In Aluminum Electrolytic Capacitors - ALC10 Series, +85C Construction The manufacturing process begins with the anode foil being electrochemically etched to increase the surface area and then "formed" to produce the aluminum oxide layer. Both the anode and cathode foils are then interleaved with absorbent paper and wound into a cylinder. During the winding process, aluminum tabs are attached to each foil to provide the electrical contact. Extended cathode Anode foil The deck, complete with terminals, is attached to the tabs and then folded down to rest on top of the winding. The complete winding is impregnated with electrolyte before being housed in a suitable container, usually an aluminum can, and sealed. Throughout the process, all materials inside the housing must be maintained at the highest purity and be compatible with the electrolyte. Each capacitor is aged and tested before being sleeved and packed. The purpose of aging is to repair any damage in the oxide layer and thus reduce the leakage current to a very low level. Aging is normally carried out at the rated temperature of the capacitor and is accomplished by applying voltage to the device while carefully controlling the supply current. The process may take several hours to complete. Damage to the oxide layer can occur due to variety of reasons: * Slitting of the anode foil after forming * Attaching the tabs to the anode foil * Minor mechanical damage caused during winding A sample from each batch is taken by the quality department after completion of the production process. The following tests are applied and may be varied at the request of the customer. In this case the batch, or special procedure, will determine the course of action. Electrical: * Leakage current * Capacitance * ESR * Impedance * Tan Delta Mechanical/Visual: * Overall dimensions * Torque test of mounting stud * Print detail * Box labels * Packaging, including packed quantity (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Foil tabs Tissues Cathode foil Etching Forming Winding Decking Impregnation Assembly Aging Testing Sleeving Packing A4020_ALC10 * 1/20/2015 12 Snap-In Aluminum Electrolytic Capacitors - ALC10 Series, +85C KEMET Corporation World Headquarters Europe Asia Southern Europe Sasso Marconi, Italy Tel: 39-051-939111 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Skopje, Macedonia Tel: 389-2-55-14-623 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Corporate Offices Fort Lauderdale, FL Tel: 954-766-2800 Kamen, Germany Tel: 49-2307-438110 North America Northern Europe Harlow, United Kingdom Tel: 44-1279-460122 Taipei, Taiwan Tel: 886-2-27528585 Espoo, Finland Tel: 358-9-5406-5000 Southeast Asia Singapore Tel: 65-6701-8033 2835 KEMET Way Simpsonville, SC 29681 Southeast Lake Mary, FL Tel: 407-855-8886 Northeast Wilmington, MA Tel: 978-658-1663 Central Novi, MI Tel: 248-306-9353 Beijing, China Tel: 86-10-5877-1075 Shanghai, China Tel: 86-21-6447-0707 Seoul, South Korea Tel: 82-2-6294-0550 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com A4020_ALC10 * 1/20/2015 13 Snap-In Aluminum Electrolytic Capacitors - ALC10 Series, +85C Disclaimer All product specifications, statements, information and data (collectively, the "Information") in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation's ("KEMET") knowledge of typical operating conditions for such applications, but are not intended to constitute - and KEMET specifically disclaims - any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com A4020_ALC10 * 1/20/2015 14