Platinum Resistance Temperature Detector SMD 1206 (V) The PRTD SMD 1206 is designed for automatic mounting in large volume applications on printed circuit boards where long time stability, interchangeability combined with low costs are important. Nominal Resistance R0 100 Ohm at 0C 1000 Ohm at 0C Tolerance DIN EN 60751 1996-07 Klasse B Klasse 2B Class B Class 2B Tolerance DIN EN 60751 2009-05 F 0.3 F 0.6 F 0.3 F 0.6 Order Number 32 207 590 32 207 589 32 207 595 32 207 594 Specification DIN EN 60751 (according to IEC 751) Temperature range -50C to +130C (Possible working temperatures using volume expansion aligned conductor board material: 150C) Tolerance Class B or 2B: -50C up to +130C Temperature coefficient TCR = 3850 ppm/K Soldering connection End-termination galvanic tin plated with Ni-barrier layer Long term stability max. R0-drift 0.06% after 1000 h at 130C Environmental conditions unhoused for dry environments only Insulation resistance > 100 M at 20C; > 2 M at 130C (glass covering) Measuring current 100: 0.3 to 1.0mA 1000: 0.1 to 0.3mA (self heating has to be considered) Self heating 0.4 K/mW at 0C Response time water current (v= 0.4m/s): t0.5 = 0.15s t0.9 = 0.30s air stream (v= 2m/s): t0.5 = 3.5s t0.9 = 10s Processing instructions face up-mounting: reflow soldering or wave soldering, e. g. double wave < 8s / 235C Storage life Min. 9 months (in dry environment) Packaging Face-up" in blister reel, 4000 pcs / reel Note Other tolerances and values of resistance are available on request. We reserve the right to make alterations and technical data printed. All technical data serves as a guideline and does not guarantee particular properties to any products. Heraeus Sensor Technology USA 1901 Route 130 North Brunswick, NJ 08902 Phone 732-940-4400 Fax 732-940-4445 Email info.hst-us@heraeus.com http://heraeus-sensor-technology-us.com Name of document: 30910039 Index B Status: 03/2013 Platinum Resistance Temperature Detector SMD 1206 (V) Solderability test of SMD type sensor elements Assembly conditions Layout of PCB: Tested PCB surfaces: Solder Paste: Benchmarker II 150m (material FR4 35m Cu, size 190.5 x 127 x 1.5mm) chem. Ag, Cu OSP, NiAu, chem. Sn F640 SA30C5-89 M30 (material SnAgCu 96.5/3.0/0.5) Tested elements Pt 1000 SMD- V 0603 Pt 1000 SMD- V 0805 Pt 1000 SMD- V 1206 Solder conditions Profiles: Atmosphere: High and Low Nitrogen and Air 1 Mid 2 Mass 3 Mix 1 Mid: Mass: 3 Mix: 2 Peak (max. temperature) High Low 237 C 245 C 231 C 238 C 238 C 248 C time above 217 C in s High Low 60 92 49 68 65 103 Position of temperature sensor in the middle of the PCB Position of temperature sensor at a big mass area on the PCB Position of temperature sensors on right and left side on the PCB Profile High: complete processing time 520 s Profile Low : complete processing time 280 s Result All tested samples showed a sufficient wetting under the described profiles High and Low, based on a visual soldering point inspection. All given data should not be construed as guaranteeing specific properties of the product or its suitability for a specific particular application. The data are an extract from a test report with status from July 2010. We reserve the right to make alterations and technical data printed. All technical data serves as a guideline and does not guarantee particular properties to any products. Heraeus Sensor Technology USA 1901 Route 130 North Brunswick, NJ 08902 Phone 732-940-4400 Fax 732-940-4445 Email info.hst-us@heraeus.com http://heraeus-sensor-technology-us.com Name of document: 30910039 Index B Status: 03/2013 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Heraeus: 32207594 32207589 32207595 32207590