P R O D U C T Terminus 400AP Series Description Introducing the Terminus GSM400AP, CDMA400AP, HSPA400AP, EVDO400AP and LTE400AP open platform intelligent cellular terminals. Building on our highly successful Terminus line of M2M modules and terminals, the Terminus 400AP series products are complete wireless communication devices with integrated ARM9TM processors and expanded memory. They include serial, USB and Ethernet connectivity and voltage input range from 7 to 26 VDC. The Atmel ARM9TM architecture is capable of 400 MIPS and operates with LinuxTM OS. The 400AP Series is the next evolution of M2M communications. Features B R I E ARM9TM Processor capable of running embedded LinuxTM 128 MB of NAND Flash 64 MB of SDRAM GSM, CDMA, HSPA 802.3 Ethernet 10/100 USB Host Port Externally exposed RS-232 and RS-485 ports CAN Interface (2 Channels) Embedded GPS 4 Exposed GPIOs SD Card RTC with Battery Backup Ruggedized Aluminum Eclosure Dimensions: 3.15" (L) x 4.27" (W) x 1.18" (H) Benefits Quick-to-market solution Increased reliability from a proven hardware platform Uses Linux-based open source software for simplified development Cost-effective solution to custom manufacturing Easily adapts to future technology F Real Time Clock Battery Backup SD Card 64 MB SDRAM 128 MB NAND Flash GPS Telit Module Plug-In Terminus CPU ARM9, 400 MHz 2111 Comprehensive Drive Aurora, Illinois 60505 630.499.2121 Fax: 630.851.5040 www.janus-rc.com Bulletin Revision Date JA07-PB 04 21 Jan 2015 20 Pin Header RS-232 GPIO RS-485 CAN 0 CAN1 USB Device USB Host Terminus 400AP Block Diagram RJ-45 Ethernet DB9 Linux Console Port Terminus 400AP Series Module Hardware Specifications Processor & Memory 400 MHz ARM9TM CPU 128 MB NAND Flash 64 MB SDRAM External Interfaces & Connectors Power Input: 7 to 26 Vdc Connectors: DB-9, USB 1.1, RJ-45 10/100 Ethernet, GPS MCX female and GSM/CDMA SMA female LEDs for power, cellular link status, Ethernet link, and speed 1 programmable LED for application specific use SD Card Internal Peripherals RTC (Real Time Clock) with battery backup Full GPS receiver GSM/CDMA/HSPA Cellular Options Debug serial console port 802.3 Ethernet 10/100 CAN RS-232 RS-485 configured for J1708 USB Host SD Card Ordering Information Ordering Information Terminus Description GSM400AP v1.1 GSM400AP v2.0 CDMA400AP v5.0 HSPA400AP v1.0 EVDO400AP v3.0 LTE400AP v1.0 LTE400AP v2.0 LTE400AP v3.0 GSM with GPS GSM without GPS CMDA - Sprint Certified HSPA+ / GSM-GPRS / EDGE / UMTS AT&T Certified EV-DO - Verizon LTE - AT&T LTE - Sprint LTE - Verizon Janus Remote Communications Europe Division of The Connor-Winfield Corporation 2111 Comprehensive Drive * Aurora, Illinois 60505 630.499.2121 * Fax: 630.851.5040 www.janus-rc.com (c) Copyright 2015 Janus Remote Communications Specifications subject to change without notice All Rights Reserved See website for latest revision. Not intended for life support applications. Bay 143 Shannon Industrial Estate Shannon, Co. Clare, Ireland Phone: +353 61 475 666