2111 Comprehensive Drive
Aurora, Illinois 60505
630.499.2121
Fax: 630.851.5040
www.janus-rc.com
P
R
O
D
U
C
T
B
R
I
E
F
Bulletin JA07-PB
Revision 04
Date 21 Jan 2015
Terminus 400AP Series
Description
Introducing the Terminus GSM400AP, CDMA400AP,
HSPA400AP, EVDO400AP and LTE400AP open
platform intelligent cellular terminals. Building on
our highly successful Terminus line of M2M modules
and terminals, the Terminus 400AP series products
are complete wireless communication devices
with integrated ARM9™ processors and expanded
memory. They include serial, USB and Ethernet
connectivity and voltage input range from 7 to 26
VDC. The Atmel ARM9™ architecture is capable of
400 MIPS and operates with Linux™ OS. The 400AP
Series is the next evolution of M2M communications.
Features
ARM9™ Processor capable of running embedded Linux™
128 MB of NAND Flash
64 MB of SDRAM
GSM, CDMA, HSPA
802.3 Ethernet 10/100
USB Host Port
Externally exposed RS-232 and RS-485 ports
CAN Interface (2 Channels)
Embedded GPS
4 Exposed GPIOs
SD Card
RTC with Battery Backup
Ruggedized Aluminum Eclosure
Dimensions: 3.15” (L) x 4.27” (W) x 1.18” (H)
Benefits
Quick-to-market solution
Increased reliability from a proven
hardware platform
Uses Linux-based open source
software for simplified development
Cost-effective solution to custom
manufacturing
Easily adapts to future technology
20 Pin Header
USB
Device
USB
Host
RJ-45
Ethernet
DB9 Linux
Console Port
GPS
CPU
ARM9, 400 MHz
64 MB
SDRAM
RS-232 GPIO RS-485 CAN 0 CAN1
Telit
Module
Real
Time Clock
Battery Backup
Plug-In
Terminus
128 MB
NAND Flash
SD
Card
Terminus 400AP Block Diagram
Terminus 400AP
Series Module
Ordering Information
Ordering Information Terminus Description
GSM400AP v1.1 GSM with GPS
GSM400AP v2.0 GSM without GPS
CDMA400AP v5.0 CMDA – Sprint Certified
HSPA400AP v1.0 HSPA+ / GSM-GPRS / EDGE / UMTS
AT&T Certified
EVDO400AP v3.0 EV-DO – Verizon
LTE400AP v1.0 LTE - AT&T
LTE400AP v2.0 LTE - Sprint
LTE400AP v3.0 LTE - Verizon
Hardware Specifications
Processor & Memory
400 MHz ARM9™ CPU
128 MB NAND Flash
64 MB SDRAM
External Interfaces & Connectors
Power Input: 7 to 26 Vdc
Connectors: DB-9, USB 1.1, RJ-45 10/100 Ethernet, GPS MCX female and GSM/CDMA SMA
female
LEDs for power, cellular link status, Ethernet link, and
speed
1 programmable LED for application specific use
SD Card
Internal Peripherals
RTC (Real Time Clock) with battery backup
Full GPS receiver
GSM/CDMA/HSPA Cellular Options
Debug serial console port
802.3 Ethernet 10/100
CAN
RS-232
RS-485 configured for J1708
USB Host
SD Card
Janus Remote Communications Europe
Bay 143
Shannon Industrial Estate
Shannon, Co. Clare, Ireland
Phone: +353 61 475 666
Division of The Connor-Winfield Corporation
2111 Comprehensive Drive • Aurora, Illinois 60505
630.499.2121 • Fax: 630.851.5040
www.janus-rc.com © Copyright 2015 Janus Remote Communications Specifications subject to change without notice
All Rights Reserved See website for latest revision. Not intended for life support applications.
