DS2102A-S - RIGOL TECHNOLOGIES

Series

Digital Oscilloscope

Series

MSO/DS2000A

MSO/DS2000A Series is the new mainstream digital scope to

meet the customer's applications with its innovative technology.

MSO2000A Series has 2+16channels, target for the embedded

design and test market with its industry leading specifications,

powerful trigger functions and broad analysis capabilities.

Bandwidth up to 300MHz, standard with 50Ω input

Lower noise  oor, Wider vertical range: 500uV/div ~ 10V/div

Max. Sample Rate: Analog channel up to 2G Sa/s ,Digital

channel up to 1G Sa/s(MSO)

Memory Depth :Analog channel up to14Mpts

/56Mpts(Opt.),Digital channel up to 14Mpts/28Mpts(Opt.)

Innovative "UltraVision" technology

Waveform capture rate up to 50,000 wfs/s

Up to 256 Levels intensity grading waveform display

Up to 65,000 frames Hardware based Real Time waveform,

Record, Replay & Analysis functions(Std.)

A variety of trigger and serial bus decoding functions

(RS232,I2C,SPI,CAN)

Built-in 2 Ch Waveform generator (MSO/DS2000A-S)

Complete connectivity: USB Host& Device, LAN(LXI), AUX

8 inch TFT (800x480) WVGA

MSO/DS2000A Series Digital Oscilloscope

Models and Key Specications

Deeper Memory Depth (Up to 56Mpts)

Higher Waveform Capture Rate (Up to 50,000 wfms/s)

Realtime Waveform Record,Replay & Analysis (Up to 65,000 frames)

Multi-level Intensity Grading Display (Up to 256 Levels)

Innovative UltraVision technology(Analog Channel)

1RIGOL

RUN/STOP/SINGLE

Decoding

Waveform record&replay

Source

Independent control

for each channel

Product Dimensions: Width X Height X Depth=361.6 mm×179.6 mm×130.8 mm Weight: 3.9 kg ± 0.5 kg(Without Package)

16 Digital channels(MSO)

Model Number DS2072A DS2072A-S DS2102A DS2102A-S DS2202A DS2202A-S DS2302A DS2302A-S

　 MSO2072A MSO2072A-S MSO2102A MSO2102A-S MSO2202A MSO2202A-S MSO2302A MSO2302A-S

Analog BW 70 MHz 100MHz 200 MHz 300 MHz

Analog Channels 2

Digital Channel(MSO） 16

Max. Sample rate Analog Channel: Max. 2 GSa/s single channel, 1 GSa/s dual channel;

Digital Channel: 1GSa/s(8 CH), 500MSa/s(16 CH)

Max. Memory Depth Analog channel: 7 Mpts(2 CH) / 14 Mpts( 1 CH) std.; 28 Mpts(2 CH) / 56 Mpts( 1 CH) opt.;

Digital channel: 7 Mpts(16 CH) / 14 Mpts(8 CH) std.; 14 Mpts(16 CH) / 28 Mpts(8 CH) opt.

Max. Waveform Capture rate 50, 000 wfms/s

Real Time waveform Record,

Replay and Analysis function

Up to 65, 000 Frames（LA Channel turn off）

Up to 32, 000 Frames（LA Channel turn on）

Std. Probes RP3300A 350MHz BW Passive Probe:2 sets；1 set RPL2316 LA Probe(MSO only)

Built-in 2Ch 25MHz Source No Yes No Yes No Yes No Yes

Wider Vertical range(500uV/div~10V/div

)

,Lower noise

oor, Better for small signal capturing

Built-in 2CH Source (MSO/DS2000A-S)

UltraVision: Deeper memory(Std.14Mpts,Opt.56Mpts)

UltraVision:Realtime waveform record,replay,analysis

function (std.)

Serial bus Trigger&Decoding functions

(RS232,I2C,SPI,CAN)

UltraVision: Deeper Memory with Multi-Level intensity

grading display(Up to 256 levels)

UltraVision: Up to 50,000 wfms/s Waveform capture rate

Versatile Trigger Functions

(

Runt, Nth Edge,Setup/Hold …

)

RIGOL 2

3RIGOL

MSO2000A Series Mixed Signal Oscilloscope

Besides the powerful functions of DS2000A,

you could get more from MSO2000A with:

16 Digital channels

Sample rate of Digital channel up to 1 GSa/s

Memory depth of Digital channel up to 28Mpts

Waveform capture rate of Digital channel up to 50,000wfms/s

Real Time Waveform Record, Replay and analysis functions,

up to 65,000 frames

Triggering and Decoding across Analog and Digital channels

Easy to be grouped for digital channels

Support a variety of logic levels

Time correlation display for both analog and digital signals

Deeper Memory Depth( Up to 28Mpts )

Higher Waveform capture rate(Up to 50,000wfms/s)

Real Time waveform record & replay(Up to 65,000 frames)

Multi-level intensity grading display

Mixed Signal Analysis with analog and digital channels

Serial bus triggering and decoding on digital channels Support a variety of logic levels

Easy to be grouped and labeled for digital channels

Innovative UltraVision technology(Digital

Channel)

RIGOL 4

RIGOL Probes supported by MSO/DS2000A Series:

RIGOL Passive Probes RIGOL Active & Current Probes

Model Number Type Description

RP1001C

Current

Probe

BW:DC~300kHz,

Max.DC:±100A,

AC P-P:200A,AC RMS:70A

Compatibility：All RIGOL Scopes.

RP1002C

Current

Probe

BW:DC~1MHz,

Max.DC:±70A,

AC P-P:140A,AC RMS:50A

Compatibility：

All RIGOL Scopes.

RP1003C

Current

Probe

BW:DC~50MHz,

Max.AC RMS:30A

AC Peak:50A(Noncontinuous)

Compatibility：

All RIGOL Scopes.

Must order RP1000P Power supply.

RP1004C

Current

Probe

BW:DC~100MHz,

Max. AC RMS:30A,

AC Peak:50A(Noncontinuous)

Compatibility：

All RIGOL Scopes.

Must order RP1000P Power supply.

RP1005C

Current

Probe

BW:DC~10MHz,

Max.150 A rms,

300 A peak (Noncontinuous),

500 A peak (@pulse width <=30 ms)

Compatibility：

All RIGOL Scopes.

Must order RP1000P Power supply.

RP1000P

Power

Supply

Power supply for

RP1003C,RP1004C,RP1005C,

support 4 channels.

RP1025D

High

Voltage

Differential

Probe

BW:25MHz;

Max. Voltage ≤ 1400Vpp

Compatibility：

All RIGOL Scopes.

RP1050D

High

Voltage

Differential

Probe

BW:50MHz;

Max. Voltage ≤ 7000Vpp

Compatibility：

All RIGOL Scopes.

RP1100D

High

Voltage

Differential

Probe

BW:100MHz;

Max. Voltage ≤ 7000Vpp

Compatibility:

All RIGOL scopes

Model Number Type Description

RP2200

High Z

Probe

1X: DC~7MHz

10X:DC~150MHz

Compatibility：

All RIGOL Scopes.

RP3300A

High Z

Probe

10X:DC~350MHz

Compatibility：

All RIGOL Scopes.

RP3500A

High Z

Probe

DC~500MHz

Compatibility：

All RIGOL Scopes.

RP1300H

High

Voltage

Probe

DC~300MHz

CATI 2000V(DC+AC),

CATII 1500 V(DC+AC)

Compatibility：

All RIGOL Scopes.

RP1010H

High

Voltage

Probe

DC~50MHz

DC:0~10KV

DC,AC:pulse

<=20KVp-p,

AC:sine wave <=7KVrms

Compatibility：

All RIGOL Scopes.

RPL2316

RP1018H

High

Voltage

Probe

DC~150MHz

DC+AC Peak:18KV CAT II

AC RMS : 12KVrms CAT II

Compatibility：

All RIGOL Scopes.

Logic analysis Probe

(For MSO4000 &

MSO2000A)

Logic

analysis

Probe

Specications

All the specications are guaranteed except the parameters marked with “Typical” and the oscilloscope needs to operate for more than 30

minutes under the specied operation temperature.

5RIGOL

Sample

Sample Mode Real-time Sample

Maximum Sample Rate Analog channel:

2 GSa/s (single-channel), 1 GSa/s (dual-channel)

Digital channel: 1GSa/s(8CH), 500MSa/s(16CH)

Peak Detect Analog channel: 500 ps (single-channel), 1 ns (dual-channel)

Digital channel: 1ns(8 CH), 2ns(16CH)

Averaging After all the channels nish N samples at the same time, N can be 2, 4, 8, 16, 32, 64, 128,

256, 512, 1024, 2048, 4096 or 8192.

High Resolution 12 bits of resolution when ≥5 μs/div @ 1 GSa/s (or ≥10 μs/div @ 500 MSa/s).

Minimum Detectable Pulse Width Digital channel: 5 ns

Memory Depth Analog channel:

single-channel: Auto, 14k pts, 140k pts, 1.4M pts, 14M pts and 56M pts (option) are available

dual-channel: Auto, 7k pts, 70k pts, 700k pts, 7M pts and 28M pts (option) are available

Digital channel: 7Mpts(16 CH), 14Mpts(8 CH) std.;14Mpts(16 CH), 28Mpts(8 CH) opt.

Input

Number of Channels MSO2XX2A/2XX2A-S: 2-analog-channel + 16-digital-channel

DS2XX2A/2XX2A-S: 2-analog-channel

Input Coupling DC, AC or GND

Input Impedance Analog channel: (1 MΩ±1%) || (16 pF±3 pF) or 50 Ω±1.5%

Digital channel: (101 kΩ±1%) || (9 pF±1 pF)

Probe Attenuation Coefcient Analog channel: 0.01X to 1000X, in 1-2-5 step

Maximum Input Voltage (1MΩ) Analog channel: CAT I 300 Vrms, CAT II 100 Vrms, Transient Overvoltage 1000 Vpk

with RP2200 10:1 probe: CAT II 300 Vrms

with RP3300A 10:1 probe: CAT II 300 Vrms

with RP3500A 10:1 probe: CAT II 300 Vrms

with RP5600A 10:1 probe: CAT II 300 Vrms

Digital channel: CAT I 40 Vrms, transient overvoltage 800 Vpk

Horizontal

Time Base Scale MSO/DS2302A/2302A-S: 1 ns/div to 1.000 ks/div

MSO/DS2202A/2202A-S: 2.000 ns/div to 1.000 ks/div

MSO/DS2102A/2102A-S/2072A/2072A-S:

5.000 ns/div to 1.000 ks/div

Channel-to-Channel Skew 1 ns (typical), 2 ns (maximum)

Time-base Range 1 ns –1000 s

Maximum Record Length 14 Mpts per channel

Time Base Accuracy[1] ≤ ±25 ppm

Time Base Drift ≤ ±5 ppm/year

Delay Range negative delay: ≥1 screen width

positive delay: 1 s to 100,000 s

Time Base Mode Y-T, X-Y, Roll

Number of X-Ys 1 path

Waveform Capture Rate[2] 50,000 wfms/s (dots display)

Vertical

Bandwidth (-3dB) MSO/DS2302A/2302A-S：DC 至 300 MHz

MSO/DS2202A/2202A-S：DC 至 200 MHz

MSO/DS2102A/2102A-S：DC 至 100 MHz

MSO/DS2072A/2072A-S：DC 至 70 MHz

Single Bandwidth MSO/DS2302A/2302A-S：DC 至 300 MHz

MSO/DS2202A/2202A-S：DC 至 200 MHz

MSO/DS2102A/2102A-S：DC 至 100 MHz

MSO/DS2072A/2072A-S：DC 至 70 MHz

Vertical Resolution Analog channel: 8 bits

Digital channel: 1 bit

Vertical Scale 500 μV/div to 1 V/div（50 Ω）

500 μV/div to 10 V/div（1 MΩ）

Offset Range 500 μV /div to 50 mV/div：±2 V

51 mV/div to 200 mV/div：±10 V

205 mV/div to 2 V/div：±50 V

2.05 V/div to 10 V/div：±100 V

Bandwidth Limit[1] MSO/DS2302A/2302A-S/2202A/2202A-S : 20 MHz/100 MHz

MSO/DS2102A/2102A-S/2072A/2072A-S : 20 MHz

Low Frequency Response

(AC Coupling -3dB)

≤ 5 Hz (on BNC)

Calculated Rise Time[1] MSO/DS2302A/2302A-S：1.2ns

MSO/DS2202A/2202A-S：1.8 ns

MSO/DS2102A/2102A-S：3.5 ns

MSO/DS2072A/2072A-S：5 ns

DC Gain Accuracy ±2% full scale

RIGOL 6

DC Offset Accuracy ±0.1 div ± 2 mV ± 1% offset value

Channel to Channel Isolation DC to maximum bandwidth: >40 dB

Vertical (Digital Channel)

Threshold 1 group with 8 channels adjustable threshold

LevelType TTL (1.4 V)

5.0 V CMOS (+2.5 V), 3.3 V CMOS (+1.65 V)

2.5 V CMOS (+1.25 V), 1.8 V CMOS (+0.9 V)

ECL (-1.3 V)

PECL (+3.7 V)

LVDS (+1.2 V)

0 V

User

Threshold range ±20.0 V, in 10 mV step

Threshold accuracy ±(100 mV + 3% of threshold setting)

Dynamic range ±10 V + threshold

Min Voltage Swing 500 mVpp

Input Impedance //101 KΩ

Probe Loading ≈ 8 pF

Vertical resolution 1 bit

Trigger

Trigger Level Range Internal ±5 div from center of the screen

EXT ±4 V

Trigger Mode Auto, Normal, Single

Holdoff Range 100 ns to 10 s

High Frequency Rejection[1] 75 kHz

Low Frequency Rejection[1] 75 kHz

Trigger Sensitivity 1 div (below 10 mV or noise rejection is enabled)

0.3 div (above 10 mV and noise rejection is disabled)

Edge Trigger

Edge Type Rising, Falling, Rising/Falling

Pulse Trigger

Pulse Condition Positive Pulse Width

(greater than, lower than, within specific interval)

Negative Pulse Width

(greater than, lower than, within specific interval)

Pulse Width Range 2 ns to 4 s

Runt Trigger

Pulse Condition None, >, <, <>

Pulse Polarity Positive, Negative

Pulse Range 2 ns to 4 s

Windows Trigger (Option)

Windows Type Rising, Falling, Rising/Falling

Trigger Position Enter, Exit, Time

Windows Time 16 ns to 4 s

Nth Edge Trigger (Option)

Edge Type Rising, Falling

Idle Time 16 ns to 4 s

Number of Edges 1 to 65535

Slope Trigger

Slope Condition Positive Slope (greater than, lower than, within specific interval)

Negative Slope (greater than, lower than, within specific interval)

Time Setting 10 ns to 1 s

Video Trigger (HDTV Option)

Signal Standard NTSC, PAL/SECAM, 480P, 576P (option), 720P, 1080P and

1080I (option)

Pattern Trigger

Pattern Setting H, L, X, Rising Edge, Falling Edge

Delay Trigger (Option)

Edge Type Rising, Falling

Delay Type >, <, <>, ><

Delay Time 2 ns to 4 s

TimeOut Trigger (Option)

Edge Type Rising, Falling, Rising/Falling

Timeout time 16 ns to 4 s

Duration Trigger (Option)

Pattern Setting H, L, X

Trigger Condition >, <, <>

Duration Time 2 ns to 4 s

Setup/Hold Trigger

Edge Type Rising, Falling

Data Type H, L

Setup Time 2 ns to 1 s

Hold Time 2 ns to 1 s

RS232/UART Trigger

Polarity Normal, Invert

Trigger Condition Start, Error, Check Error, Data

Baud 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps,

57600 bps, 115200 bps, User

7RIGOL

Data Bits 5 bit, 6 bit, 7 bit, 8 bit

I2C Trigger

Trigger Condition Start, Restart, Stop, Missing ACK, Address, Data, A&D

Address Bits 7 bit, 8 bit, 10 bit

Address Range 0 to 127, o to 255, 0 to 1023

Byte Length 1 to 5

SPI Trigger

Trigger Condition Timeout

Timeout Value 100 ns to 1 s

Data Bits 4 bit to 32 bit

Data Setting H, L, X

CAN Trigger (Option)

Signal Type Rx, Tx, CAN_H, CAN_L, Differential

Trigger Condition SOF, EOF, Frame Type, Frame Error

Baud 10 kbps, 20 kbps, 33.3 kbps, 50 kbps, 62.5 kbps, 83.3 kbps, 100 kbps, 125 kbps, 250 kbps, 500 kbps,

800 kbps, 1 Mbps, User

Sample Point 5% to 95%

Frame Type Data, Remote, Error, Over Load

Error Type Bit Fill, Answer Error, Check Error, Format Error, Random Error

USB Trigger (Option)

Signal Speed Low Speed, Full Speed

Trigger condition SOP, EOP, RC, Suspend, Exit Suspend

Measure

Cursor

Manual Mode

Voltage Deviation between Cursors ( △ V)

Time Deviation between Cursors ( △ T)

Reciprocal of △ T (Hz) (1/ △ T)

Track Mode Voltage and Time Values of the Waveform Point

Auto Mode Allow to display cursors during auto measurement

Auto Measurement Analog channel:

Measurements of Maximum, Minimum, Peak-Peak Value, Top Value, Bottom Value, Amplitude,

Average, Mean Square Root, Overshoot, Pre-shoot, Area, Period Area, Frequency, Period, Rise Time,

Fall Time, Positive Pulse Width, Negative Pulse Width, Positive Duty Cycle, Negative Duty Cycle,

Delay 12 , Delay 12 , Phase 12 , Phase 12

Digital channel:

Frequency, Period, Positive Pulse Width, Negative Pulse Width, Positive Duty Cycle, Negative Duty

Cycle, Delay 12 ,

Delay 12 , Phase 12 , Phase 12

Number of Measurements Display 5 measurements at the same time.

Measurement Range Screen Region or Cursor Region

Measurement Statistic Current, Average, Max, Min, Standard Deviation, Number of Measurements

Frequency Counter Hardware 6 bits frequency counter (channels are selectable)

Math Operation

Waveform Operation A+B, A-B, A×B, A÷B, FFT, Editable Advanced Operation, Logic Operation

FFT Window Rectangle, Hanning, Blackman, Hamming

FFT Display Split, Full Screen

FFT Vertical Scale Vrms, dB

Logic Operation AND, OR, NOT, XOR

Math Function Intg, Diff, Lg, Exp, Sqrt, Sine, Cosine, Tangent

Number of Buses for Decoding 2

Decoding Type Parallel (standard), RS232 (option), I2C (option) , SPI (option), CAN (option)

Display

Display Type 8.0 inches (203 mm) TFT LCD display

Display Resolution 800 Horizontal ×RGB×480 Vertical Pixel

Display Color 160,000 Color (TFT)

Persistence Time Min, 50 ms, 100 ms, 200 ms, 500 ms, 1 s, 2 s, 5 s, 10 s, 20 s, Infinite

Display Type Dots, Vectors

Real-time Clock Time and Date (user adjustable)

Signal Source (MSO2000A-S/DS2000A-S)

Channels 2

Sample Rate 200 MSa/s

Vertical Resolution 14 bits

Max. Frequency 25 MHz

Standard Waveform Sine, Square, Pulse, Ramp, Noise, DC

Built-in Waveform Sinc, Exponential Rise, Exponential Fall, ECG, Gauss, Lorentz, Haversine

Sine Frequency Range 100 mHz to 1 MHz

Flatness ±0.5 dB (relative to 1 kHz)

Harmonic Distortion -40 dBc

Stray(Non-harmonic) -40 dBc

Total Harmonic Distortion 1%

S/N Ratio 40 dB

RIGOL 8

Square/Pulse Frequency Range Square: 100 mHz to 15 MHz

Pulse: 100 mHz to 1 MHz

Rise/Fall Time <15 ns

Overshoot <5%

Duty Cycle Square: 50%

Pulse: 10% to 90% (user adjustable)

Duty Cycle Resolution 1% or 10 ns (the larger of the two)

Min. Pulse Width 20 ns

Pulse Width Resolution 10 ns or 5 bits (the larger of the two)

Jitter 500 ps

Ramp Frequency Range 100 mHz to 100 kHz

Linearity 1%

Symmetry 0 to 100%

Noise Bandwidth 25 MHz (typical)

Built-in Waveform Frequency Range 100 mHz to 1 MHz

Arbitrary Waveform Frequency Range 100 mHz to 10 MHz

Waveform Length 2 to 16k points

Internal Storage Location 10

Frequency Accuracy 100 ppm (lower than 10 kHz)

50 ppm (higher than 10 kHz)

Resolution 100 mHz or 4 bits, the larger of the two

Amplitude Output Range 20 mVpp to 5 Vpp, HighZ

10 mVpp to 2.5 Vpp, 50 Ω

Resolution 100 μV or 3 bits, the larger of the two

Accuracy 2% (1 kHz)

DC Offset Range ±2.5 V, HighZ

±1.25 V, 50 Ω

Resolution 100 μV or 3 bits, the larger of the two

Accuracy Offset setting Value±2%

Modulation AM, FM

I/O

Standard Ports USB HOST (support USB-GPIB), USB DEVICE, LAN, Aux Output (TrigOut/PassFail)

Printer Compatibility PictBridge

General Specications

Probe Compensation Output

Output Voltage[1] About 3 V, peak-peak

Frequency[1] 1 kHz

Power

Power Voltage 100 V to 240 V, 45 Hz to 440 Hz

Power Maximum 50 W

Fuse 2 A, T Degree, 250 V

Environment

Temperature Range Operating: 0 ℃ to +50 ℃

Non-operating: -40 ℃ to +70 ℃

Cooling Method Fan cooling

Humidity Range 0℃ to +30℃ : ≤ 95％ Relative Humidity

+30℃ to +40℃ : ≤ 75％ Relative Humidity

+40℃ to +50℃ : ≤ 45％ Relative Humidity

Altitude Operating: under 3,000 meters

Non-operating: under 15,000 meters

Physical Characteristics

Size[3] Width×Height×Depth = 361.6 mm× 179.6 mm×130.8 mm

Weight[4] Package Excluded 3.9 kg ± 0.5 kg

Package Included 4.5 kg ± 0.5 kg

Calibration Interval

The recommended calibration interval is one year.

Regulatory Information

Electromagnetic Compatibility 2004/108/EC

Execution standard EN 61326-1:2006 EN 61326-2-1:2006

Safety UL 61010-1:2004; CAN/CSA-C22.2 NO. 61010-1-2004;

EN 61010-1:2001; IEC 61010-1:2001

Note[1]: Typical value.

Note[2]: Maximum value. 20ns, single-channel mode, dots display, auto memory depth.

Note[3]: Supporting legs and handle folded, knob height included.

Note[4]: Standard conguration.

RIGOL® is the registered trademark of RIGOL Technologies, Inc. Product information in this document subject to update without notice. For

the latest information about RIGOL's products, applications and services, please contact local RIGOL of ce or access RIGOL of cial website:

www.rigol.com V01-14

Ordering Information

Warranty

Three-year warranty,excluding probes and accessories.

Headquarter

RIGOL TECHNOLOGIES, INC.

No.156,Cai He Village,

Sha He Town,

Chang Ping District, Beijing,

102206 P.R.China

Tel:+86-10-80706688

Fax:+86-10-80705070

Email: support@rigol.com

USA

RIGOL TECHNOLOGIES

USA,INC.

7401 First Place,Suite N

Oakwood Village

OH 44146,USA

Tel/Fax: 440-232-4488x111

Toll free: 877-4-RIGOL-1x111

Email: info@rigol.com

Europe

RIGOL TECHNOLOGIES EU,

GmbH

Lindbergh str. 4

82178 Puchheim, Germany

Tel: +49(0)89-8941895-0

Email: info-europe@rigol.com

Description Order Number

DS2072A（70MHz，2CH） DS2072A

DS2072A-S（70MHz，2CH + 2 CH Source） DS2072A-S

MSO2072A（70MHz，2+16 MSO） MSO2072A

MSO2072A-S（70MHz，2+16 MSO + 2 CH Source） MSO2072A-S

DS2102A（100MHz，2CH） DS2102A

DS2102A-S（100MHz，2CH + 2 CH Source） DS2102A-S

MSO2102A（100MHz，2+16 MSO） MSO2102A

MSO2102A-S（100MHz，2+16 MSO + 2 CH Source） MSO2102A-S

DS2202A（200MHz，2CH） DS2202A

DS2202A-S（200MHz，2CH + 2 CH Source） DS2202A-S

MSO2202A（200MHz，2+16 MSO） MSO2202A

MSO2202A-S（200MHz，2+16 MSO + 2 CH Source） MSO2202A-S

DS2302A（300MHz，2CH） DS2302A

DS2302A-S（300MHz，2CH + 2 CH Source） DS2302A-S

MSO2302A（300MHz，2+16 MSO） MSO2302A

MSO2302A-S（300MHz，2+16 MSO + 2 CH Source） MSO2302A-S

Standard

Accessories

Power Cord conforming to the standard of the country -

USB Data Cable CB-USBA-USBB-FF-150

2 Passive Probes (350 MHz) RP3300A

1 Set LA probe(MSO only) RPL2316

Quick Guide -

Resource CD (User’s Guide and Application Software) -

Optional Accessories Rack Mount Kit RM-DS2000A

Deep Memory Option Analog channel and Digital channel(MSO) memory Depth upgraded upto 24Mpts MEM-DS2000A

Advanced trigger functions Windows, Nth Edge,HDTV,Delay, Time Out, Duration, USB AT-DS2000A

Decoding Options RS232,I2C,SPI Decoding Kit SD-DS2000A

CAN Analysis kit(Trigger+Decoding) CAN-DS2000A

Model　