MC34064 MC33064
2MOTOROLA ANALOG IC DEVICE DATA
MAXIMUM RATINGS
Rating Symbol Value Unit
Power Input Supply Voltage Vin –1.0 to 10 V
Reset Output Voltage VO10 V
Reset Output Sink Current (Note 1) ISink Internally
Limited mA
Clamp Diode Forward Current, Pin 1 to 2 (Note 1) IF100 mA
Power Dissipation and Thermal Characteristics
P Suffix, Plastic Package
Maximum Power Dissipation @ TA = 25°C
Thermal Resistance, Junction–to–Air
D Suffix, Plastic Package
Maximum Power Dissipation @ TA = 25°C
Thermal Resistance, Junction–to–Air
DM Suffix, Plastic Package
Maximum Power Dissipation @ TA = 25°C
Thermal Resistance, Junction–to–Air
PD
RθJA
PD
RθJA
PD
RθJA
625
200
625
200
520
240
mW
°C/W
mW
°C/W
mW
°C/W
Operating Junction Temperature TJ+150 °C
Operating Ambient Temperature
MC34064
MC33064
TA0 to +70
–40 to +85
°C
Storage Temperature Range Tstg –65 to +150 °C
NOTE: ESD data available upon request.
ELECTRICAL CHARACTERISTICS (For typical values TA = 25°C, for min/max values TA is the operating ambient temperature range
that applies [Notes 2 and 3] unless otherwise noted.)
Characteristics Symbol Min Typ Max Unit
COMPARATOR
Threshold Voltage
High State Output (Vin Increasing)
Low State Output (Vin Decreasing)
Hysteresis
VIH
VIL
VH
4.5
4.5
0.01
4.61
4.59
0.02
4.7
4.7
0.05
V
RESET OUTPUT
Output Sink Saturation
(Vin = 4.0 V, ISink = 8.0 mA)
(Vin = 4.0 V, ISink = 2.0 mA)
(Vin = 1.0 V, ISink = 0.1 mA)
VOL –
–
–
0.46
0.15
–
1.0
0.4
0.1
V
Output Sink Current (Vin, Reset = 4.0 V) ISink 10 27 60 mA
Output Off-State Leakage (V in, Reset = 5.0 V) IOH –0.02 0.5 µA
Clamp Diode Forward Voltage, Pin 1 to 2 (IF = 10 mA) VF0.6 0.9 1.2 V
TOTAL DEVICE
Operating Input Voltage Range Vin 1.0 to 6.5 – – V
Quiescent Input Current (Vin = 5.0 V) Iin –390 500 µA
NOTES: 1.Maximum package power dissipation limits must be observed.
2.Low duty cycle pulse techniques are used during test to maintain junction temperature as close to ambient as possible.
3.Tlow =0°C for MC34064 Thigh = +70°C for MC34064
–40°C for MC33064 +85°C for MC33064