VS-220CNQ030PbF
www.vishay.com Vishay Semiconductors
Revision: 09-May-17 1Document Number: 94169
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
High Performance Schottky Rectifier, 220 A
FEATURES
• 150 °C TJ operation
• Center tap module
• Low forward voltage drop
• High frequency operation
• Guard ring for enhanced ruggedness and long term
reliability
• UL approved file E222165
• Designed and qualified for industrial level
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DESCRIPTION / APPLICATIONS
The VS-220CNQ.. center tap Schottky rectifier module
series has been optimized for low reverse leakage at high
temperature.
The proprietary barrier technology allows for reliable
operation up to 150 °C junction temperature. Typical
applications are in high current switching power supplies,
plating power supplies, UPS systems, converters,
freewheeling diodes, welding, and reverse battery
protection.
PRIMARY CHARACTERISTICS
IF(AV) 220 A
VR30 V
Package TO-244
Circuit configuration Two diodes common cathode
Base common
cathode
Lug
terminal
anode 1
Lug
terminal
anode 2
TO-244
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL CHARACTERISTICS VALUES UNITS
IF(AV) Rectangular waveform 220 A
VRRM 30 V
IFSM tp = 5 μs sine 18 000 A
VF110 Apk, TJ = 125 °C (per leg) 0.41 V
TJRange -55 to +150 °C
VOLTAGE RATINGS
PARAMETER SYMBOL VS-220CNQ030PbF UNITS
Maximum DC reverse voltage VR30 V
Maximum working peak reverse voltage VRWM
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average
forward current
See fig. 5
per leg
IF(AV) 50 % duty cycle at TC = 122 °C, rectangular waveform
110
A
per device 220
Maximum peak one cycle non-repetitive
surge current per leg
See fig. 7
IFSM
5 μs sine or 3 μs rect. pulse Following any rated load
condition and with rated
VRRM applied
18 000
10 ms sine or 6 ms rect. pulse 1950
Non-repetitive avalanche energy per leg EAS TJ = 25 °C, IAS = 15 A, L = 1 mH 99 mJ
Repetitive avalanche current per leg IAR Current decaying linearly to zero in 1 μs
Frequency limited by TJ maximum VA = 1.5 x VR typical 22 A
VS-220CNQ030PbF
www.vishay.com Vishay Semiconductors
Revision: 09-May-17 2Document Number: 94169
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) Pulse width < 300 μs, duty cycle < 2 %
Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) Fig. 2 - Typical Values of Reverse Current vs.
Reverse Voltage (Per Leg)
ELECTRICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum forward voltage drop per leg
See fig. 1 VFM (1)
110 A TJ = 25 °C 0.49
V
220 A 0.59
110 A TJ = 125 °C 0.41
220 A 0.55
Maximum reverse leakage current per leg
See fig. 2 IRM (1) TJ = 25 °C VR = Rated VR
10 mA
TJ = 125 °C 650
Maximum junction capacitance per leg CTVR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C 7400 pF
Typical series inductance per leg LSFrom top of terminal hole to mounting plane 7.0 nH
Maximum voltage rate of change dV/dt Rated VR10 000 V/μs
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL MIN. TYP. MAX. UNITS
Maximum junction and storage temperature range TJ, TStg -55 - 150 °C
Thermal resistance, junction to case per leg RthJC
- - 0.38
°C/Wper module - - 0.19
Thermal resistance, case to heatsink RthCS -0.10-
Weight -68 -g
2.4 oz.
Mounting torque 35.4 (4) - 53.1 (6)
lbf in
(N m)
Mounting torque center hole 30 (3.4) - 40 (4.6)
Terminal torque 30 (3.4) - 44.2 (5)
Vertical pull - - 80 lbf in
2" lever pull - - 35
1
10
100
1000
IF - Instantaneous Forward
Current (A)
VFM - Forward Voltage Drop (V)
0.2 0.5 0.70.3 0.4 0.6 0.8
0.1 0.9
TJ = 150 °C
TJ = 125 °C
TJ = 25 °C
0.01
10
1000
10 000
100
1
0.1
IR - Reverse Current (mA)
VR - Reverse Voltage (V)
10 25 301550 20
TJ = 150 °C
TJ = 125 °C
TJ = 100 °C
TJ = 75 °C
TJ = 50 °C
TJ = 25 °C
VS-220CNQ030PbF
www.vishay.com Vishay Semiconductors
Revision: 09-May-17 3Document Number: 94169
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg)
Fig. 5 - Maximum Allowable Case Temperature vs. Average
Forward Current (Per Leg)
Fig. 6 - Forward Power Loss Characteristics (Per Leg)
1000
10 000
CT - Junction Capacitance (pF)
VR - Reverse Voltage (V)
515 30352010025
TJ = 25 °C
0.001
0.01
0.1
1
0.00001 0.0001 0.001 0.01 0.1 1.0
t
1
- Rectangular Pulse Duration (s)
Z
thJC
- Thermal Impedance
(°C/W)
10
D = 0.75
D = 0.50
D = 0.33
D = 0.25
D = 0.20
Single pulse
(thermal resistance)
100
130
160
150
140
120
110
Allowable Case Temperature (°C)
IF(AV) - Average Forward Current (A)
20 60 120 160
140
80400100
DC
Square wave (D = 0.50)
80 % rated VR applied
See note (1)
0
70
60
50
40
30
20
10
80
Average Power Loss (W)
I
F(AV)
- Average Forward Current (A)
20 60 120 16014080400 100
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
DC
RMS limit
VS-220CNQ030PbF
www.vishay.com Vishay Semiconductors
Revision: 09-May-17 4Document Number: 94169
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg)
Fig. 8 - Unclamped Inductive Test Circuit
Note
(1) Formula used: TC = TJ - (Pd + PdREV) x RthJC;
Pd = forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6);
PdREV = inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR
ORDERING INFORMATION TABLE
LINKS TO RELATED DOCUMENTS
Dimensions www.vishay.com/doc?95021
100
1000
10 000
100 000
IFSM - Non-Repetitive Surge Current (A)
tp - Square Wave Pulse Duration (µs)
10 000100010010
At any rated load condition
and with rated VRRM applied
following surge
Current
monitor
High-speed
switch
D.U.T.
Rg = 25 Ω
+
Freewheel
diode Vd = 25 V
L
IRFP460
40HFL40S02
- Average current rating (x 10)
- Product silicon identification
- C = circuit configuration
- N = not isolated
- Q = Schottky rectifier diode
- Voltage rating (30 V)
- Lead (Pb)-free
Device code
22 0 C N Q 030 PbF
1- Vishay Semiconductors product
2
3
4
5
6
7
8
51 32 4 6 7 8
VS-
Outline Dimensions
www.vishay.com Vishay Semiconductors
Revision: 24-Apr-15 1Document Number: 95021
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TO-244
DIMENSIONS in millimeters (inches)
3
2
3
1
Ø 5.2 (Ø 0.20)
9.6 (0.37) MIN.
93 (3.66) MAX.
¼" - 20 UNC
80 (3.15)
40 (1.57)
13 (0.51)
35 (1.37) REF.
7 (0.27)
6 (0.23)
17.5 (0.69)
16.5 (0.65)
21 (0.82)
20 (0.78)
Ø 7.2 (Ø 0.28)
(2 places)
12.6 (0.5)
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
