https://www.phoenixcontact.com/us/products/1437232
11/26/13Page2/7
Sensor/actuator box-SACB-8/16-L-C SCO OTB-1437232
Technical data
General
Sensor/actuator connection system M12-SPEEDCON-socket
Ambient conditions
Degree of protection IP54 (With sealed mounting holes)
Ambient temperature (operation) -30 °C ... 80 °C
Ambient temperature (storage/transport) -30 °C ... 90 °C
Local diagnostics function
Local diagnostics Supply voltage Green LED
Status display I/O Yellow LED
Master cable data/connection data
Connection method Pluggable spring-cage connection
Conductor cross section min. (signal) 0.14 mm²
Conductor cross section max. (signal) 1.5 mm²
Conductor cross section AWG min. (signal) 26
Conductor cross section AWG max. (signal) 16
Stripping length (signal) 9 mm
Conductor cross section min. (energy) 0.14 mm²
Conductor cross section max. (energy) 1.5 mm²
Conductor cross section AWG min. (energy) 26
Conductor cross section AWG max. (energy) 16
Tightening torque slot sensor/actuator cable 0.4 Nm
Insulation material
Housing material PBT
Material of the moulding mass PUR
Contact material Cu alloy
Contact surface material Gold-plated
Contact carrier material PA
Material of contact, master cable side CU alloy
Material of contact surface, master cable side tin-plated
Material of the contact carrier on the master cable side PA
Material of threaded sleeve Zinc die-cast
Material of threaded sleeve surface Nickel-plated
Material, O-ring NBR
Sealing material CR (flat gasket on the back)
Pin assignment
Slot/position = Wire color or connection 1 / 4 (A)=1 / 4