222236771683 - BC Components

1999 Apr 29 79

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

MKT RADIAL EPOXY LACQUERED TYPE PITCH 5 mm (kinked, straight and bent back leads)

PITCH 7.5 mm (kinked and straight leads)

Fig.1 Simplified outlines.

handbook, full pagewidth

365 366 367

CBA774

FEATURES

•Low-inductive wound cell of

metallized (PETP) film

•Cell protected by epoxy lacquer

•Radial leads of solder-coated wire

•Resistant to solvents and rinsing

liquids.

APPLICATIONS

•Blocking and coupling

•Bypass and energy reservoir.

DETAIL SPECIFICATION

For more detailed data and test

requirements see

“Type detail

specification HQN-384-02/105”

QUICK REFERENCE DATA

DESCRIPTION VALUE

Capacitance range (E12 series) 0.01 to 1.0 µF

Capacitance tolerance ±10%; ±5%

Rated (DC) voltage 63 V; 100 V; 250 V; 400 V

Rated (AC) voltage 40 V; 63 V; 160 V; 220 V

Climatic category 55/100/56

Rated temperature 85 °C

Maximum application temperature 100 °C

Tangent of loss angle at 10 kHz 100 ×10−4

Reference speciﬁcation IEC 60384-2

Performance grade grade 1 (long life)

1999 Apr 29 80

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365

COMPOSITION OF CATALOGUE NUMBER

TYPE AND PITCHES

365 5.0 mm

TYPE PACKAGING LEAD CONFIGURATION C-TOL 63 V 100 V 250 V 400 V

365

ammopack

kinked leads;

H=16.0 mm; P0=12.7 mm ±10% 75 85 − −

±5% 76 86 − −

bent back kinked leads;

H=16.0 mm; P0=12.7 mm ±10% 15 25 45 55

±5% 16 26 46 56

taped on reel

kinked leads;

H=16.0 mm; P0=12.7 mm ±10% 71 81 − −

±5% 72 82 − −

bent back kinked leads;

H=16.0 mm; P0=12.7 mm ±10% 11 21 41 51

±5% 12 22 42 52

MULTIPLIER

(nF)

0.1 2

10 4

100 5

CAPACITANCE

(numerically)

2222 365 XX XX X

Example:

104 =10 ×10 =100 nF

1999 Apr 29 81

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 366/367

TYPE PACKAGING LEAD CONFIGURATION C-TOL 63 V 100 V 250 V 400 V

366 loose in box

kinked;

lead length 4.0 mm ±10% 75 85 − −

±5% 76 86 − −

kinked;

lead length 17.0 mm ±10% 71 81 − −

±5% 72 82 − −

367 loose in box

straight;

lead length 4.0 mm ±10% 75 85 − −

±5% 76 86 − −

straight;

lead length 22.0 mm ±10% 71 81 − −

±5% 72 82 − −

Available on request with pitch =7.5 mm 63 V 100 V 250 V 400 V

366 loose in box

kinked;

lead length 4.0 mm ±10% 15 25 45 55

±5% 16 26 46 56

kinked;

lead length 17.0 mm ±10% 11 21 41 51

±5% 12 22 42 52

367 loose in box

straight;

lead length 4.0 mm ±10% 15 25 45 55

±5% 16 26 46 56

straight;

lead length 22.0 mm ±10% 11 21 41 51

±5% 12 22 42 52

2222 36. XX XX X

TYPE AND PITCHES

366 5.0 mm

7.5 mm

367

MULTIPLIER

(nF)

0.1 2

10 4

100 5

CAPACITANCE

(numerically)

Example:

104 =10 ×10 =100 nF

1999 Apr 29 82

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

MKT 365/366/367 GENERAL DATA PITCH 5 mm (kinked and straight leads)

Speciﬁc reference data for the 63 V DC capacitors

Available 63 V DC versions

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

2. H =in-tape height; for detailed specifications refer to this handbook, chapter

“Packaging information”

DESCRIPTION VALUE

at 1 kHz at 10 kHz at 100 kHz

Tangent of loss angle:

C≤0.1 µF≤75 ×10−4≤130 ×10−4≤225 ×10−4

0.1 µF<C≤0.47 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4

0.47 µF<C≤1.0 µF≤75 ×10−4≤130 ×10−4−

Rated voltage pulse slope (dU/dt)R at 63 V (DC) 110 V/µs

R between leads, for C ≤0.33 µF at 10 V; 1 minute >15000 MΩ

RC between leads, for C >0.33 µF at 100 V; 1 minute >5000 s

R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ

Withstanding voltage DC (cut off current 10 mA);

rise time 100 V/s 100 V; 1 minute

PACKAGING(1) DIMENSIONS LEAD

CONFIGURATION PITCH

(mm)

FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

C-tol =±10% C-tol =±5%

Ammopack H=16.0 mm; note 2 kinked

5 2222 365 75... 2222 365 76... preferred

Taped on reel 5 2222 365 71... 2222 365 72... on request

Loose in box lt=4.0 +1.0/−0.5 mm 5 2222 366 75... 2222 366 76... on request

lt=17.0 ±4.0 mm 5 2222 366 71... 2222 366 72... on request

Loose in box lt=4.0 +1.0/−0.5 mm straight 5 2222 367 75... 2222 367 76... on request

lt=22.0 ±4.0 mm 5 2222 367 71... 2222 367 72... on request

Fig.4 Outline.

(1) Hole ∅1.0 for dt=0.5 mm.

(2) 0 ≤α<50°.

handbook, full pagewidth

seating plane(1)

(2)

∅dt

CBA775

∅1.3

≤1.5

1999 Apr 29 83

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

URdc =63 V; URac =40 V Pitch 5 mm (kinked and straight leads)

Notes

1. Dimensions in brackets for straight leads.

2. The shading indicates preferred types.

(µF)

DIMENSIONS(1)

bmax ×hmax ×lmax

(mm)

MASS

(g)

CATALOGUE NUMBER

AMMOPACK; H =16.0 mm

C-tol =±10% C-tol =±5%

catalogue number(2) last 5 digits(2)

Pitch =5.0 +0.4/−0.2 mm; dt=0.50 ±0.05 mm; A =1.7 ±0.3 mm

0.047

4.0 ×12.5 (7.5) ×7.3 0.3

2222 365 75473 .. 76473

0.056 2222 365 75563 .. 76563

0.068 2222 365 75683 .. 76683

0.082 2222 365 75823 .. 76823

0.1 2222 365 75104 .. 76104

0.12 2222 365 75124 .. 76124

0.15 4.0 ×13.0 (8.0) ×7.3 0.3 2222 365 75154 .. 76154

0.18 4.0 ×13.5 (8.5) ×7.3 0.4 2222 365 75184 .. 76184

0.22 4.2 ×13.5 (8.5) ×7.3 0.4 2222 365 75224 .. 76224

0.27 4.5 ×14.0 (9.0) ×7.3 0.4 2222 365 75274 .. 76274

0.33 4.5 ×14.5 (10.5) ×7.3 0.4 2222 365 75334 .. 76334

0.39 2222 365 75394 .. 76394

0.47 4.5 ×15.5 (11.5) ×7.3 0.4 2222 365 75474 .. 76474

0.56 5.0 ×14.0 (10.0) ×7.3 0.4 2222 365 75564 .. 76564

0.68 5.5 ×14.5 (10.5) ×7.3 0.4 2222 365 75684 .. 76684

0.82 5.5 ×15.0 (11.0) ×7.3 0.5 2222 365 75824 .. 76824

1.0 5.5 ×15.5 (11.5) ×7.3 0.5 2222 365 75105 .. 76105

1999 Apr 29 84

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

MKT 365/366/367 GENERAL DATA PITCH 5 mm (bent back leads)

PITCH 7.5 mm (kinked and straight leads)

Speciﬁc reference data for the 63 V DC capacitors

Available 63 V DC versions

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

2. H =in-tape height; for detailed specifications refer to this handbook, chapter

“Packaging information”

DESCRIPTION VALUE

at 1 kHz at 10 kHz at 100 kHz

Tangent of loss angle:

C≤0.1 µF≤75 ×10−4≤130 ×10−4≤225 ×10−4

0.1 µF<C≤0.47 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4

0.47 µF<C≤1.0 µF≤75 ×10−4≤130 ×10−4−

Rated voltage pulse slope (dU/dt)R at 63 V (DC) 110 V/µs

R between leads, for C ≤0.33 µF at 10 V; 1 minute >15000 MΩ

RC between leads, for C >0.33 µF at 100 V; 1 minute >5000 s

R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ

Withstanding (DC) voltage (cut off current 10 mA);

rise time 100 V/s 100 V; 1 minute

PACKAGING(1) DIMENSIONS LEAD

CONFIGURATION PITCH

(mm)

FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

C-tol =±10% C-tol =±5%

Ammopack H=16.0 mm; note 2 bent back 5 2222 365 15... 2222 365 16... preferred

Taped on reel 5 2222 365 11... 2222 365 12... on request

Loose in box lt=4.0 +1.0/−0.5 mm kinked 7.5 2222 366 15... 2222 366 16... on request

lt=17.0 ±4.0 mm 7.5 2222 366 11... 2222 366 12... on request

Loose in box lt=4.0 +1.0/−0.5 mm straight 7.5 2222 367 15... 2222 367 16... on request

lt=22.0 ±4.0 mm 7.5 2222 367 11... 2222 367 12... on request

Fig.5 Outline.

(1) Hole ∅1.0 for dt=0.6 mm.

(2) 0 ≤α<50°.

handbook, full pagewidth

CBA948

seating

plane(1)

(2)

∅1.3

≤1.5

P P

A∅dt

P∅dt

(2)

1999 Apr 29 85

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

URdc =63 V; URac =40 V Pitch 5 mm (bent back leads)

Notes

1. The shading indicates preferred types.

2. Pitch =7.5 mm (kinked and straight leads) is available on request; for dimensions and package quantities see

“Type detail specification HQN-384-02/105”

(µF)

DIMENSIONS

bmax ×hmax ×lmax

(mm)

MASS

(g)

PACKAGING

AMMOPACK; H =16.0 mm

C-tol =±10% C-tol =±5%

catalogue number(1) last 5 digits(1)

Pitch =5.0 +0.4/−0.2 mm; dt=0.60 ±0.06 mm; A =1.7 ±0.3 mm(2)

0.12

4.0 ×13.5 ×10.0 0.4

2222 365 15124 .. 16124

0.15 2222 365 15154 .. 16154

0.18 2222 365 15184 .. 16184

0.22 2222 365 15224 .. 16224

0.27 4.5 ×14.0 ×10.0 0.5 2222 365 15274 .. 16274

0.33 5.0 ×14.5 ×10.0 0.6 2222 365 15334 .. 16334

0.39 2222 365 15394 .. 16394

0.47

5.5 ×15.0 ×10.0 0.7

2222 365 15474 .. 16474

0.56 2222 365 15564 .. 16564

0.68 2222 365 15684 .. 16684

0.82 2222 365 15824 .. 16824

1.0 2222 365 15105 .. 16105

1999 Apr 29 86

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

MKT 365/366/367 GENERAL DATA PITCH 5 mm (kinked and straight leads)

Speciﬁc reference data for the 100 V DC capacitors

Available 100 V DC versions

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

2. H =in-tape height; for detailed specifications refer to this handbook, chapter

“Packaging information”

DESCRIPTION VALUE

at 1 kHz at 10 kHz at 100 kHz

Tangent of loss angle:

C≤0.1 µF≤75 ×10−4≤130 ×10−4≤225 ×10−4

0.1 µF<C≤0.47 µF≤75 ×10−4≤130 ×10−4≤225 ×10−4

Rated voltage pulse slope (dU/dt)R at 100 V (DC) 110 V/µs

R between leads, for C ≤0.33 µF at 100 V; 1 minute >15000 MΩ

RC between leads, for C >0.33 µF at 100 V; 1 minute >5000 s

R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ

Withstanding (DC) voltage (cut off current 10 mA);

rise time 100 V/s 160 V; 1 minute

PACKAGING(1) DIMENSIONS LEAD

CONFIGURATION PITCH

(mm)

FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

C-tol =±10% C-tol =±5%

Ammopack H=16.0 mm; note 2 kinked

5 2222 365 85... 2222 365 86... preferred

Taped on reel 5 2222 365 81... 2222 365 82... on request

Loose in box lt=4.0 +1.0/−0.5 mm 5 2222 366 85... 2222 366 86... on request

lt=17.0 ±4.0 mm 5 2222 366 81... 2222 366 82... on request

Loose in box lt=4.0 +1.0/−0.5 mm straight 5 2222 367 85... 2222 367 86... on request

lt=22.0 ±4.0 mm 5 2222 367 81... 2222 367 82... on request

Fig.6 Outline.

(1) Hole ∅1.0 for dt=0.5 mm.

(2) 0 ≤α<50°.

handbook, full pagewidth

seating plane(1)

(2)

∅dt

CBA775

∅1.3

≤1.5

1999 Apr 29 87

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

URdc =100 V; URac =63 V Pitch 5 mm (kinked and straight leads)

Notes

1. Dimensions in brackets for straight leads.

2. The shading indicates preferred types.

(µF)

DIMENSIONS(1)

bmax ×hmax ×lmax

(mm)

MASS

(g)

CATALOGUE NUMBER

AMMOPACK; H =16.0 mm

C-tol =±10% C-tol =±5%

catalogue number(2) last 5 digits(2)

Pitch =5.0 +0.4/−0.2 mm; dt=0.50 ±0.05 mm; A =1.7 ±0.3 mm

0.01

3.7 ×12.5 (7.5) ×7.3 0.3

2222 365 85103 .. 86103

0.012 2222 365 85123 .. 86123

0.015 2222 365 85153 .. 86153

0.018 2222 365 85183 .. 86183

0.022 2222 365 85223 .. 86223

0.027 2222 365 85273 .. 86273

0.033 2222 365 85333 .. 86333

0.039 2222 365 85393 .. 86393

0.047 4.0 ×12.5 (7.5) ×7.3 0.3 2222 365 85473 .. 86473

0.056 2222 365 85563 .. 86563

0.068 2222 365 85683 .. 86683

0.082 4.0 ×13.0 (8.0) ×7.3 0.3 2222 365 85823 .. 86823

0.1

4.0 ×13.5 (8.5) ×7.3 0.4

2222 365 85104 .. 86104

0.12 2222 365 85124 .. 86124

0.15 2222 365 85154 .. 86154

0.18 2222 365 85184 .. 86184

0.22 4.2 ×13.5 (8.5) ×7.3 0.4 2222 365 85224 .. 86224

0.27 4.5 ×14.0 (9.0) ×7.3 0.4 2222 365 85274 .. 86274

1999 Apr 29 88

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

MKT 365/366/367 GENERAL DATA PITCH 5 mm (bent back leads)

PITCH 7.5 mm (kinked and straight leads)

Speciﬁc reference data for the 100 V DC capacitors

Available 100 V DC versions

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

2. H =in-tape height; for detailed specifications refer to this handbook, chapter

“Packaging information”

DESCRIPTION VALUE

at 1 kHz at 10 kHz at 100 kHz

Tangent of loss angle:

C≤0.1 µF≤75 ×10−4≤130 ×10−4≤225 ×10−4

0.1 µF<C≤0.47 µF≤75 ×10−4≤130 ×10−4≤225 ×10−4

Rated voltage pulse slope (dU/dt)R at 100 V (DC) 110 V/µs

R between leads, for C ≤0.33 µF at 100 V; 1 minute >15000 MΩ

RC between leads, for C >0.33 µF at 100 V; 1 minute >5000 s

R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ

Withstanding (DC) voltage (cut off current 10 mA);

rise time 100 V/s 160 V; 1 minute

PACKAGING(1) DIMENSIONS LEAD

CONFIGURATION PITCH

(mm)

FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

C-tol =±10% C-tol =±5%

Ammopack H=16.0 mm; note 2 bent back 5 2222 365 25... 2222 365 26... preferred

Taped on reel 5 2222 365 21... 2222 365 22... on request

Loose in box lt=4.0 +1.0/−0.5 mm kinked 7.5 2222 366 25... 2222 366 26... on request

lt=17.0 ±4.0 mm 7.5 2222 366 21... 2222 366 22... on request

Loose in box lt=4.0 +1.0/−0.5 mm straight 7.5 2222 367 25... 2222 367 26... on request

lt=22.0 ±4.0 mm 7.5 2222 367 21... 2222 367 22... on request

Fig.7 Outline.

(1) Hole ∅1.0 for dt=0.6 mm.

(2) 0 ≤α<50°.

handbook, full pagewidth

CBA948

seating

plane(1)

(2)

∅1.3

≤1.5

P P

A∅dt

P∅dt

(2)

1999 Apr 29 89

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

URdc =100 V; URac =63 V Pitch 5 mm (bent back leads)

Notes

1. The shading indicates preferred types.

2. Pitch =7.5 mm (kinked and straight leads) is available on request; for dimensions and package quantities see

“Type detail specification HQN-384-02/105”

(µF)

DIMENSIONS

bmax ×hmax ×lmax

(mm)

MASS

(g)

CATALOGUE NUMBER

AMMOPACK; H =16.0 mm

C-tol =±10% C-tol =±5%

catalogue number(1) last 5 digits(1)

Pitch =5.0 +0.4/−0.2 mm; dt=0.60 ±0.06 mm; A =1.7 ±0.3 mm(2)

0.039

4.0 ×13.5 ×10.0 0.4

2222 365 25393 .. 26393

0.047 2222 365 25473 .. 26473

0.056 2222 365 25563 .. 26563

0.068 2222 365 25683 .. 26683

0.082 2222 365 25823 .. 26823

0.1 2222 365 25104 .. 26104

0.12 4.5 ×14.0 ×10.5 0.5 2222 365 25124 .. 26124

0.15 5.0 ×14.5 ×10.5 0.6 2222 365 25154 .. 26154

0.18 2222 365 25184 .. 26184

0.22 5.5 ×15.0 ×10.5 0.7 2222 365 25224 .. 26224

0.27

6.0 ×15.5 ×10.5 0.7

2222 365 25274 .. 26274

0.33 2222 365 25334 .. 26334

0.39 2222 365 25394 .. 26394

0.47 2222 365 25474 .. 26474

1999 Apr 29 90

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

MKT 365/366/367 GENERAL DATA PITCH 5 mm (bent back leads)

PITCH 7.5 mm (kinked and straight leads)

Speciﬁc reference data for the 250 V DC capacitors

Available 250 V DC versions

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

2. H =in-tape height; for detailed specifications refer to this handbook, chapter

“Packaging information”

DESCRIPTION VALUE

at 1 kHz at 10 kHz at 100 kHz

Tangent of loss angle:

C≤0.1 µF≤75 ×10−4≤130 ×10−4≤225 ×10−4

0.1 µF<C≤0.15 µF≤75 ×10−4≤120 ×10−4≤225 ×10−4

Rated voltage pulse slope (dU/dt)R at 250 V (DC) 70 V/µs

R between leads, for C ≤0.33 µF at 100 V; 1 minute >30000 MΩ

R between interconnected leads and casing; 100 V; 1 minute >30000 MΩ

Withstanding (DC) voltage (cut off current 10 mA);

rise time 100 V/s 400 V; 1 minute

PACKAGING(1) DIMENSIONS LEAD

CONFIGURATION PITCH

(mm)

FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

C-tol =±10% C-tol =±5%

Ammopack H=16.0 mm; note 2 bent back 5 2222 365 45... 2222 365 46... preferred

Taped on reel 5 2222 365 41... 2222 365 42... on request

Loose in box lt=4.0 +1.0/−0.5 mm kinked 7.5 2222 366 45... 2222 366 46... on request

lt=17.0 ±4.0 mm 7.5 2222 366 41... 2222 366 42... on request

Loose in box lt=4.0 +1.0/−0.5 mm straight 7.5 2222 367 45... 2222 367 46... on request

lt=22.0 ±4.0 mm 7.5 2222 367 41... 2222 367 42... on request

Fig.8 Outline.

(1) Hole ∅1.0 for dt=0.6 mm.

(2) 0 ≤α<50°.

handbook, full pagewidth

CBA948

seating

plane(1)

(2)

∅1.3

≤1.5

P P

A∅dt

P∅dt

(2)

1999 Apr 29 91

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

URdc =250 V; URac =160 V Pitch 5 mm (bent back leads)

Notes

1. The shading indicates preferred types.

2. Pitch =7.5 mm (kinked and straight leads) is available on request; for dimensions and package quantities see

“Type detail specification HQN-384-02/105”

(µF)

DIMENSIONS

bmax ×hmax ×lmax

(mm)

MASS

(g)

CATALOGUE NUMBER

AMMOPACK; H =16.0 mm

C-tol =±10% C-tol =±5%

catalogue number(1) last 5 digits(1)

Pitch =5.0 +0.4/−0.2 mm; dt=0.60 ±0.06 mm; A =1.7 ±0.3 mm(2)

0.018

4.0 ×13.5 ×10.0 0.4

2222 365 45183 .. 46183

0.022 2222 365 45223 .. 46223

0.027 2222 365 45273 .. 46273

0.033 2222 365 45333 .. 46333

0.039 2222 365 45393 .. 46393

0.047 2222 365 45473 .. 46473

0.056 2222 365 45563 .. 46563

0.068 4.5 ×13.0 ×10.0 0.5 2222 365 45683 .. 46683

0.082 2222 365 45823 .. 46823

0.1 5.0 ×13.5 ×10.0 0.6 2222 365 45104 .. 46104

0.12 5.5 ×14.0 ×10.0 0.6 2222 365 45124 .. 46124

0.15 5.5 ×15.5 ×10.0 0.7 2222 365 45154 .. 46154

1999 Apr 29 92

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

MKT 365/366/367 GENERAL DATA PITCH 5 mm (bent back leads)

PITCH 7.5 mm (kinked and straight leads)

Speciﬁc reference data for the 400 V DC capacitors

Available 400 V DC versions

Notes

1. For SPQ refer to this handbook, chapter

“Packaging information”

2. H =in-tape height; for detailed specifications refer to this handbook, chapter

“Packaging information”

DESCRIPTION VALUE

at 1 kHz at 10 kHz at 100 kHz

Tangent of loss angle:

C≤0.056 µF≤75 ×10−4≤120 ×10−4≤200 ×10−4

C≤0.1 µF≤75 ×10−4≤130 ×10−4≤225 ×10−4

Rated voltage pulse slope (dU/dt)R at 400 V (DC) 110 V/µs

R between leads, for C ≤0.33 µF at 100 V; 1 minute >30000 MΩ

R between interconnected leads and casing; 100 V; 1 minute >30000 MΩ

Withstanding (DC) voltage (cut off current 10 mA);

rise time 100 V/s 640 V; 1 minute

PACKAGING(1) DIMENSIONS LEAD

CONFIGURATION PITCH

(mm)

FIRST 9 DIGITS OF

CATALOGUE NUMBER ORDERING

C-tol =±10% C-tol =±5%

Ammopack H=16.0 mm; note 2 bent back 5 2222 365 55... 2222 365 56... preferred

Taped on reel 5 2222 365 51... 2222 365 52... on request

Loose in box lt=4.0 +1.0/−0.5 mm kinked 7.5 2222 366 55... 2222 366 56... on request

lt=17.0 ±4.0 mm 7.5 2222 366 51... 2222 366 52... on request

Loose in box lt=4.0 +1.0/−0.5 mm straight 7.5 2222 367 55... 2222 367 56... on request

lt=22.0 ±4.0 mm 7.5 2222 367 51... 2222 367 52... on request

Fig.9 Outline.

(1) Hole ∅1.0 for dt=0.6 mm.

(2) 0 ≤α<50°.

handbook, full pagewidth

CBA948

seating

plane(1)

(2)

∅1.3

≤1.5

P P

A∅dt

P∅dt

(2)

1999 Apr 29 93

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

URdc =400 V; URac =220 V Pitch 5 mm (bent back leads)

Notes

1. The shading indicates preferred types.

2. Pitch =7.5 mm (kinked and straight leads) is available on request; for dimensions and package quantities see

“Type detail specification HQN-384-02/105”

(µF)

DIMENSIONS

bmax ×hmax ×lmax

(mm)

MASS

(g)

CATALOGUE NUMBER

AMMOPACK; H =16.0 mm

C-tol =±10% C-tol =±5%

catalogue number(1) last 5 digits(1)

Pitch =5.0 +0.4/−0.2 mm; dt=0.60 ±0.06 mm; A =1.7 ±0.3 mm(2)

0.0033

4.0 ×13.5 ×10.0 0.4

2222 365 55332 .. 56332

0.0039 2222 365 55392 .. 56392

0.0047 2222 365 55472 .. 56472

0.0056 2222 365 55562 .. 56562

0.0068 2222 365 55682 .. 56682

0.0082 2222 365 55822 .. 56822

0.01 2222 365 55103 .. 56103

0.012 2222 365 55123 .. 56123

0.015 2222 365 55153 .. 56153

0.018 4.5 ×13.0 ×10.0 0.6 2222 365 55183 .. 56183

0.022 5.0 ×13.5 ×10.0 0.7 2222 365 55223 .. 56223

0.027 4.0 ×12.5 ×10.0 0.4 2222 365 55273 .. 56273

0.033 4.5 ×13.0 ×10.0 0.5 2222 365 55333 .. 56333

0.039 5.0 ×13.5 ×10.0 0.5 2222 365 55393 .. 56393

0.047 5.0 ×13.5 ×10.0 0.6 2222 365 55473 .. 56473

0.056 5.5 ×14.0 ×10.0 0.7 2222 365 55563 .. 56563

1999 Apr 29 94

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

CONSTRUCTION

Description

•Low-inductive wound cell of metallized polyethylene

terephthalate film

•Protected by a hard, water repellent, solvent resistant

epoxy lacquer

•Radial leads, solder coated:

– Copper clad steel wire for pitch =5 mm (kinked and

straight leads)

– Copper wire for pitch =5 mm (bent back leads) and

pitch =7.5 mm (kinked and straight leads).

Fig.10 Construction.

handbook, halfpage

connecting wire

metallized polyester film

metal spray layer

CBA073

Mounting

NORMAL USE

The capacitors are designed for mounting on

printed-circuit boards. The capacitors packed in bandoliers

are designed for mounting on printed-circuit boards by

means of automatic insertion machines.

For detailed tape specifications refer to this handbook,

chapter

“Packaging information”

SPECIFIED METHOD OF MOUNTING TO WITHSTAND VIBRATION

AND SHOCK

In order to withstand vibration and shock tests, it must be

ensured that the underside of the kinks are in good contact

with the printed-circuit board:

•For pitches ≤15 mm the capacitors shall be

mechanically fixed by the leads.

•For larger pitches the capacitors shall be mounted in the

same way and the body clamped.

Storage temperature

•Storage temperature: Tstg =−25 to +40 °C with RH

maximum 80% without condensation.

RATINGS AND CHARACTERISTICS REFERENCE

CONDITIONS

Unless otherwise specified all electrical values apply at an

ambient free air temperature of 23 ±1°C, an atmospheric

pressure of 86 to 106 kPa and a relative humidity of

50 ±2%.

For reference testing, a conditioning period shall be

applied over 96 ±4 hours by heating the products in a

circulating air oven at the rated temperature and a relative

humidity not exceeding 20%.

1999 Apr 29 95

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

CHARACTERISTICS

Capacitance

Fig.11 Capacitance change as a function of frequency: typical curve.

handbook, full pagewidth

CBA074

−3

102103104105

−2

−1

f (Hz)

∆C

(%)

Fig.12 Capacitance change at 1 kHz as a function of ambient free air temperature.

handbook, full pagewidth

CBA919

100−60 −20 6020

−2

−4

−6

typical

max.

min.

Tamb (°C)

∆C

(%)

1999 Apr 29 96

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

Impedance

Maximum DC and AC voltage as a function of temperature

Fig.13 Impedance as a function of frequency: typical curves.

handbook, full pagewidth

CBA076

104105106107108

102

10−3

10−2

10−1

f (Hz)

Impedance

(Ω)

63V; 100 nF

63V; 1 µF

MKT 365

Fig.14 Multiplying factor for DC and AC voltage as a function of temperature.

handbook, full pagewidth

CBA086

1.2

0.8

0.4

1.0

0.6

0.2

factor

−60 −20 8040−40 0 20 60 100

Tamb (°C)

1999 Apr 29 97

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

Maximum RMS voltage (sinewave) as a function of frequency

Fig.15 AC voltage (RS value) as a function of frequency at Tamb ≤85 °C for Rdc =63 V.

handbook, full pagewidth

CBA077

MKT 365/366/367

47 nF

100 nF

470 nF

1000 nF

AC voltage

(V)

f (Hz)

102

10 103104105

102

Fig.16 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤100 °C for URdc =63 V.

handbook, full pagewidth

CBA776

MKT 365/366/367

47 nF

100 nF

470 nF

1000 nF

AC voltage

(V)

f (Hz)

102

10 103104105

102

1999 Apr 29 98

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

Fig.17 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C, for URdc =100 V.

handbook, full pagewidth

CBA078

MKT 365/366/367

470 nF

100 nF

47 nF

10 nF

AC voltage

(V)

f (Hz)

102

10 103104105

102

Fig.18 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤100 °C for URdc =100 V.

handbook, full pagewidth

CBA777

MKT 365/366/367

470 nF

100 nF

47 nF

10 nF

AC voltage

(V)

f (Hz)

102

10 103104105

102

1999 Apr 29 99

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

Fig.19 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C, for URdc =250 V.

handbook, full pagewidth

CBA079

MKT 365/366/367

47 n F

18 n F

AC voltage

(V)

f (Hz)

102

10 103104105

103

102

Fig.20 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤100 °C for URdc =250 V.

handbook, full pagewidth

AC voltage

(V)

f (Hz)

102

10 103104105

103

102

CBA778

47 n F

18 n F

MKT 365/366/367

1999 Apr 29 100

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

Maximum RMS current (sinewave) as a function of frequency

The maximum RMS current is defined by .

Uac is the maximum AC voltage depending on the ambient temperature in Figs 15 to 22.

Fig.21 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C, for URdc =400 V.

handbook, full pagewidth

AC voltage

(V)

f (Hz)

102

10 103104105

103

102

CBA080

3.3 n F

15 n F

MKT 365/366/367

Fig.22 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤100 °C for URdc =400 V.

handbook, full pagewidth

AC voltage

(V)

f (Hz)

102

10 103104105

103

102

CBA779

3.3 n F

15 n F

MKT 365/366/367

Iac ωCU

××=

1999 Apr 29 101

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

Tangent of loss angle

Insulation resistance

Fig.23 Tangent of loss angle as a function of frequency: typical curve.

handbook, full pagewidth

102103104105

103

102

dissipation

factor

(× 10−4)

f (Hz)

CBA087

Fig.24 RC product as a function of ambient free air temperature: typical curve.

CBA088

100−50 0 50

105

102

104

103

(s)

Tamb (°C)

1999 Apr 29 102

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

Maximum allowed component temperature rise (∆T) as a function of the ambient temperature (Tamb)

Heat conductivity (G) as a function of pitch and capacitor body thickness in mW/°C

Table 1 Heat conductivity

Power dissipation and maximum component temperature rise

The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a

function of the free air ambient temperature.

Power dissipation can be calculated in accordance with chapter

“Introduction”

, section

“Maximum power dissipation”.

The component temperature rise (∆T) can be measured (see section “Measuring the component temperature” for more

details) or calculated by :

•∆T=component temperature rise (°C).

•P=power dissipation of the component (mW).

•G=heat conductivity of the component (mW/°C).

bmax

(mm) ORIGINAL PITCH (mm)

5 7.5

3.5 1.5 3.0

4.0 2.0 3.5

4.5 2.5 3.5

5.0 2.5 4.0

5.5 3.0 4.0

6.0 3.5 4.5

6.5 −5.0

Fig.25 Maximum allowed component temperature rise as a function of the ambient temperature.

handbook, full pagewidth

CBA821

−60 −20 80

−40 0 20 60 100

Tamb (°C)

∆T

(°C)

∆TPG⁄=

1999 Apr 29 103

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

Measuring the component temperature

A thermocouple must be attached to the capacitor body; see Fig.26.

The temperature is measured in unloaded (Tamb) and maximum loaded

condition (Tc).

The temperature rise is given by .

To avoid radiation or convection, the capacitor should be tested in a wind-free

box.

Fig.26 Mounting the thermocouple.

handbook, halfpage

thermocouple

CBA771

∆TT

amb

–=

1999 Apr 29 104

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

Application note and limiting conditions

These capacitors are not suitable for mains applications as across-the-line capacitors without additional

protection, as described below. These mains applications are strictly regulated by safety standards and

therefore electromagnetic interference suppression capacitors conforming to the standards must be used.

To select the capacitor for a certain application, the following conditions must be checked:

1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc).

2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum Up-p to avoid the ionisation inception level.

3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and

without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied

by URdc and divided by the applied voltage.

For all other pulses following equation must be fulfilled:

T is the pulse duration.

The rated voltage pulse slope is valid for ambient temperatures up to 85 °C. For higher temperatures a derating factor

of 3% per K shall be applied.

4. The maximum component surface temperature rise must be lower than the limits in 0.

5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a

capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to

100 times the values mentioned in Table 1.

6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series

connected with an impedance to the mains the applicant must guarantee that following conditions are fulfilled in any

case (spikes and surge voltages from the mains included).

VOLTAGE CONDITIONS FOR 6ABOVE

ALLOWED VOLTAGES Tamb ≤85 °C85°C<T

amb ≤100 °C

Maximum continuous RMS voltage URac 0.8 ×URac

Maximum temporary RMS overvoltage (<24 hours) 1.25 ×URac URac

Maximum peak voltage (Vo-p) (<2 s) 1.6 ×URdc 1.3 ×URdc

2dU

--------





∫dt×× URdc dU

--------





rated

×<

1999 Apr 29 105

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

Example

C=330 nF - 63 V used for the voltage signal shown in Fig.27.

Up-p =40 V; Up=35 V; T1=100 µs; T2=200 µs.

The ambient temperature is 35 °C.

Checking the conditions:

1. The peak voltage Up=35 V is lower than 63 V (DC).

2. The peak-to-peak voltage 40 V is lower than .

3. The voltage pulse slope dU/dt =40 V/100 µs=0.4 V/µs.

This is lower than 110 V/µs (see specific reference data for each version).

4. The dissipated power is 16.2 mW as calculated with Fourier terms.

The temperature rise for bmax =4.5 mm and pitch =5 mm will be .

This is lower than 15 °C temperature rise at 35 °C; see Fig.25.

5. Not applicable.

6. Not applicable.

2 2 40V (AC)×× 113 Upp–

16.2 mW

2.5 mW °C⁄

--------------------------------- 6.5 °C=

Fig.27 Voltage signal.

handbook, full pagewidth

time

voltage

CBA865

Up-p

1999 Apr 29 106

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

MARKING

Product marking

COUNTRY OF ORIGIN:BELGIUM

The capacitors are marked on the top with black ink

(see Figs 28 and 29), containing the following information:

1. Rated capacitance code in nF or µF

2. Tolerance on rated capacitance: K =±10%; J =±5%

3. Rated (DC) voltage. Fig.28 Example of marking for capacitors with

pitch =5 mm (kinked and straight leads).

handbook, halfpage

0.047

K 63

CBA091

Fig.29 Example of marking for capacitors with

pitch =5 mm (bent back leads) and

pitch =7.5 mm (kinked and straight leads).

handbook, halfpage

470 K 100

CBA092

COUNTRY OF ORIGIN: PRC (PEOPLE’SREPUBLIC OF CHINA)

The capacitors are marked on the side with black ink

(see Fig.30), containing the following information:

1. Rated capacitance code in nF or µF

2. Tolerance on rated capacitance: K =±10%; J =±5%

3. Rated (DC) voltage.

Fig.30 Example of marking for capacitors with

pitch =5 and 7.5 mm.

handbook, halfpage

CBA465

100n

K100

1999 Apr 29 107

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

Package marking

The package containing the capacitors is marked as shown in Fig.31.

handbook, full pagewidth

CCA337

10.

Fig.31 Barcode label.

Barcode label marking

LINE MARKING EXPLANATION

1 Manufacturer's name

2 Country of origin

3 Sub-family

4 Type description

5 Capacitance value in µF, tolerance, voltage

and climatic category

(“IEC 60068-1”)

6 Batchnumber (only for capacitors from PRC)

7•Country of origin: Belgium

Preference origin code: A

Country of origin in code: 170 (Belgium)

Responsible production centre: HQ

Work order: WO

•Country of origin: China

Preference origin code: N

Country of origin in code: 260 (PRC)

Responsible production centre: 07

8 Product type description

9 Quantity and production period, year and week

code

10 Product code (12NC)

Please note:

In due time BC COMPONENTS

will replace PHILIPS COMPONENTS

1999 Apr 29 108

BC Components Product speciﬁcation

Metallized polyester ﬁlm capacitors MKT 365/366/367

QUICK REFERENCE TEST REQUIREMENTS (see note 1)

Notes

1. For detailed information, see

“Type detail specification HQN-384-02/105”

2. Measuring frequency 100 kHz for C ≤470 nF and 10 kHz for C >470 nF.

TEST PROCEDURE

(quick reference) REQUIREMENTS

Robustness of leads

Tensile strength:

“IEC 60068-2-21”

load 10 N; 10 s

no visible damage

legible marking

∆C/C≤2%

∆tan δ≤30 ×10−4; note 2

Bending:

“IEC 60068-2-21”

load 5 N; 4 ×90°

Resistance to soldering heat:

“IEC 60068-2-20”

solder bath: 260 °C; 10 s

Component solvent resistance isopropyl alcohol; 23 °C; 5 minutes

Robustness of component

Vibration:

“IEC 60068-2-6”

10 to 55 Hz; amplitude 0.75 mm or

acceleration 98 m/s2; 6 hours ∆C/C≤3%

∆tan δ≤30 ×10−4; note 2

Shock:

“IEC 60068-2-27”

half sinewave; 490 m/s2; 11 ms

Climatic sequence

Dry heat:

“IEC 60068-2-2”

16 hours; 100 °C

∆C/C≤5%

∆tan δ≤50 ×10−4; note 2

Rins ≥50% of speciﬁed value

Damp heat cyclic, ﬁrst cycle:

“IEC 60068-2-30”:

Cold:

“IEC 60068-2-1”

2 hours; −55 °C

Damp heat, remaining cycles:

“IEC 60068-2-30”

Other applicable tests

Damp heat steady state:

“IEC 60068-2-3”

56 days; 40 °C; 90 to 95% RH ∆C/C≤5%

∆tan δ≤50 ×10−4; note 2

Rins ≥50% of speciﬁed value

Endurance (DC):

“IEC 60384-2”

2000 hours:

1.25 ×URdc; 85 °C

1×URdc; 100 °C

∆C/C≤5%

∆tan δ≤30 ×10−4; note 2

Rins ≥50% of speciﬁed value

Heat storage:

“IEC 60384-2”

2000 hours; 100 °C∆C/C≤3%

∆tan δ≤30 ×10−4; note 2

Resistance to soldering heat

with preheating:

“IEC 60384-2”

body temperature: 100 °C;

bath temperature: 260 °C;

dwell time: 5 s

∆C/C≤2% (C ≤10 nF)

∆C/C≤1% (C >10 nF)

∆tan δ≤30 ×10−4; note 2