SPECIFICATION SHEET CABLE, ELECTRIC, RADIATION-CROSSLINKED, EXTRUDED, MODIFIED, FLUOROPOLYMER~INSULATED, TWO CONDUCTOR, SHIELDED, JACKETEO, NORMAL WEIGHT 200C The complete requirements for procuring the cable described herein shall consist of this document and the issue in effect of Raychem Specification 55A. 55A1826 15 March 1983 Revision A COMPONENT WIRES ~ 55A0816 SHIELD - NICKEL-COATED COPPER JACKET - RADIATION-CROSSL INKED, MODIFIED ETFE CABLE CONSTRUCTION DETAILS CONDUCTOR SHIELD PART NUMBER SIZE SIZE (AWG) (AWG) MINIMUM NOMINAL 1/ | NOMINAL i MAXIMUM inches inches 1/ Nominal values are for information only. Nominal values are not requirements. CABLE RATINGS AND ADDITIONAL REQUIREMENTS MAXIMUM WEIGHT (1b/1000 ft) TEMPERATURE RATING: 200C LIFE CYCLE: 230 + 3C for 500 hours Maximum continuous conductor temperature LOW TEMPERATURE-COLD BEND: -65 + 3C for 4 hours VOLTAGE RATING: 690 volts (rms) SRIELD COVERAGE: 85% (minimum) ACCELERATED AGING: 300 + 3C for 7 hours THERMAL SHOCK: 300 + 3C for 6 hours BLOCKING: 799 + 32C for 6 hours VOLTAGE WITHSTAND TEST: (After Accelerated Aaing, NIELECTRIC wiTHSTANO: 1500 volts, 60 Hz Immersion, Life Cycle, Low Temperature-Cold Bend FLAMMA3L ITY: and Thermal Shock) 1000 volts, 60 Hz, 1 minute Procedure 1, 3 seconds (maximum); 3 in. (maximum) ; no flaming of facial tissue PART NUMBER: JACKET COLO?: White preferred The "*" in the part numbers above shall be replaced by JACKET SLONGATION AND TENSILE STRENGTH: color code designators in accordance with MIL-STD-681 Elongation, 50% iminimum ) with a slash separating component wire colors and a Tens: ta Strenath, $000 psi (minimum) dash separating the component wire colors from the JACKET FLAWS; jacket color. Spark Test, 1009 valts, 60 Hz (rms), 100% test Example: apulse Gretectric Test, 6.0 kV (peak), 100% test AWG 20, white and black component wires; white jacket: 55A1826-20-9/0-9. Raychem Raychem Corporation 300 Consutution Drive, Mento Park, Catiforn:a 94025 rare crgtter ute corer ayes Boe cere cr yee AOPUMENTS SERPRENCTD HEREIN, 415) 361 3333 TWX 910 373 1205