ADVANCED INFORMATION GC/GF Series Quartz Crystal Legacy 49SMLB Series 11.5 x 4.5 x 4.0mm & 11.5 x 4.5 x 3.0mm GC GF Quartz Crystal Metal Can (SMD) 11.5 x 4.5 x 4.0mm SMD Frequency Range: *3.2 to 36.000 MHz, AT Fundamental Product Features *30.0 to 125.000 MHz, AT 3rd Overtone * Standard: 4.0mm Max height GC Series *26.8 to 54.000 MHz, BT Fundamental * Low profile: 3.0mm Max height GF Series * Available on tape & reel, 24mm tape, 1000 units per reel Characteristics at 25C 2C: *Frequency Calibration Tolerance: 30ppm * Pb-free and RoHS/Green compliant. *Load Capacitance: 8 to 32pF or Series Resonance Product Description *Effective Series Resistance (ESR): The crystals are miniature AT or BT cut strip resonators housed in low profile packages for surface mounting. The parts utilize a proven, low-cost, metal package technology with a precision molded base and universal contact configuration. Fundamental: 20 to 200 max depending on frequencey 3rd Overtone: 60 to 80 max depending on frequency *Drive Level: 100W typ. (500W Max) *Shunt Capacitance: 7pF Max Temperature Range: *Operating: -20 to +70C or -40 to +85C Applications *Storage: -55 to +125C * Set-Top Box/Multimedia * Clock/VCXO Multiplier Temperature Stability: * Network Adapter Cards *30ppm (-20 to +70C) AT Cut * Modems *50 or 100ppm (-40 to +85C) AT Cut * Microcontrollers and Processors *0 to -100ppm (-20 to +70C) BT Cut * Remote control devices Aging @ 25C, first year: *3ppm Max Reflow Temperature: *260C Max, 10 seconds Max (RoHS package) SaRonix-eCeraTM is a Pericom(R) Semiconductor company * US: +1-408-435-0800 TW: +886-3-4518888 * All specifications are subject to change without notice. www.saronix-ecera.com GC/GF REV2008_OCT08_01.3 1 Quartz Crystal Metal Can (SMD) GC GF GC/GF Series Quartz Crystal Legacy 49SMLB Series Mechanical: *Shock: JESD22-B104 Condition B *Solderability: MIL-STD-883, Method 2003 (non-RoHS package) *Solderability: J-STD-002( RoHS package ) *Terminal Strength: MIL-STD-883 Method 2004 *Vibration: JESD22-B103 *Solvent Resistance: JESD22-B107 *Resistance to Soldering Heat: MIL-STD-202, Method 210, Condition I or J (Non-RoHS package) *Resistance to Soldering Heat: J-STD-020C Table 5-2 Pb-free devices (3 cycles max) (RoHS package) Environmental: *Gross Test Leak: JESD22-A109, Condition C *Fine Test Leak: JESD22-A109, Condition A1 *Moisture Resistance: JESD22-A113 *Insulation Resistance: 500 M min (100 VDC) Part Ordering Information: GC/GF XXX YYYY A: Product Family B: XXX = Frequency Code C: YYYY = Specification Code Following the above format, Saronix-eCera part numbers will be assigned upon confirmation of exact customer requirements. Legacy Ordering Information - For Reference Only: 49SMLB 03.6864 - 18 Type / Package 49SMLB = 2 contact, 4mm high 49SAB = 4 contact, 5 mm high 49SNC = 4 contact, 5mm high 49SUB = 6 contact, 5mm high GGC -E (X) Options (T) = Tape and Reel (full increments only) 1000 pieces (Q) = Manufactured in a TS16949 or QS9000 registered facility Blank = Bulk Frequency Frequency (in MHz) = 0x.xxxx, xx.xxxx (a zero is used in front of frequencies under 10 MHz) -E (dash E) = Lead (Pb)-free RoHS Compliant Version Blank = non-RoHS (not available for new designs) Cut Type - (dash) = AT-cut Parallel Resonance Blank = AT-cut Series Resonance B = BT-Cut Calibration / Stability / Temp Range GGC = 30ppm / 30ppm / -20 to +70C (ATCut) GHE = 30ppm / 50ppm / -40 to +85C (ATCut) HJE = 50ppm / 100ppm / -40 to +85C (ATCut) Blank = 50ppm/0 to -100ppm/-20 to +70C (BTCut) *others available Load Capacitance xx = Parallel Resonance (specify load) Blank = Series Resonance Part Number Example: Freq 5.1234MHz, 30ppm calib, 30ppm stability, -20 to +70C, 16pF = 49SMLB05.1234-16GGC = 49SMLB05.1234-16GGC-E (for PB-Free/RoHS Compliant) SaRonix-eCeraTM is a Pericom(R) Semiconductor company * US: +1-408-435-0800 TW: +886-3-4518888 * All specifications are subject to change without notice. www.saronix-ecera.com GC/GF REV2008_OCT08_01.3 2 Quartz Crystal Metal Can (SMD) GC GF GC/GF Series Quartz Crystal Legacy 49SMLB Series Mechanical Drawings: GC Series 11.7 max Recommended Land Pattern: 10.6 max 0~0.3 4.8 4.6 4.8 2.0 3.8 max 4.0 0.2 UNIT: mm 4.5 max 4.5 max 12.70.5 UNIT: mm 0.80.2 4.8 max Mechanical Drawings: GF Series (Low Profile) Recommended Land Pattern: 11.7 max 10.6 max 0~0.3 4.8 4.6 4.8 2.0 3.8 max 3.00.2 UNIT: mm 4.5 max 4.5 max 12.70.5 UNIT: mm 0.80.2 4.8 max SaRonix-eCeraTM is a Pericom(R) Semiconductor company * US: +1-408-435-0800 TW: +886-3-4518888 * All specifications are subject to change without notice. www.saronix-ecera.com GC/GF REV2008_OCT08_01.3 3