Manual Switches AML23 Series
Electronic Control Paddle
28Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada
INCANDESCENT OR NON-LIGHTED DISPLAY
Covers ordered separately.
FEATURES
1Silver or gold contacts.
11, 2 or 4 poles.
1Toggle type paddle operators
permanently installed in rectangular
housings.
1Covers for the switch housing may be
lighted or unlighted.
1UL recognized, CSA certified.
1Lamps can be furnished installed or
ordered separately.
1Lamp circuit independent of switch
circuit.
Electrical Data page 19
Paddle Covers page 47
Lamps and LEDs page 58
Accessories page 57
Mounting Dimensions pages 59, 62
**
*AML23 Series: 1 pole and
2-pole only.
*AML23 ORDER GUIDE
AML23 E B A 2 AA 01
Housing Operator/Bezel Incandescent Terminal Circuitry Operating
Type Color Lamp Type Type Codes Action
AML23 E B A 2 Insert Code
letters as
shown in
Circuitry Chart
Insert Code numbers
from Operating
Action Chart
Rectangular Black/Black No Lamp
Installed
B
6 V Lamp*
C
14 V Lamp*
E
28 V Lamp*
.110 ×.020
(Solder or
Quick-Connect)
3
.025 ×.025
(Printed Ckt.,
or Push-on)
Non-Lighted
AML23 F
Rectangular
1 Lamp Ckt. (A)
AML23 G
Rectangular
2 Lamp Ckts.
(A&B)
* Lamps will be installed per each lamp circuit specified in the Housing Type.
1The ‘‘MICRO SWITCH’’
identification is shown
on this side of the
switch housings.
Example: AML23EBA2AA01
Rectangular non-lighted paddle switch
housing; black paddle and bezel; .110 ×
.020 terminals; with one circuit ON and
one circuit OFF in each extreme operator
position (maintained).
CIRCUITRY
Silver Gold 2-Position 3-Position
Contacts Contacts
AA BA
AC BC
(Non-illuminated
switches only)
CA DA
CC DC
(Non-illuminated
switches only)
OPERATING ACTION
2-Position:
01
Maint. None Maint.
02
Mom. None Maint.
03
Maint. None Mom.
3-Position:
04
Maint. Maint. Maint.
05
Mom. Maint. Mom.
06
Maint. Maint. Mom.
07
Mom. Maint. Maint.
Manual Switches AML25 Series
Electronic Control Paddle
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada29
LED DISPLAY
Covers with LED
‘‘
window’’ ordered separately.
FEATURES
1Identical to AML23, except furnished
with one or two rectangular high
efficiency LED’s which give flush
display area and wide angle
indication.
1Available with or without diode
protection for LED’s.
1LED circuit independent of switch
circuit.
Electrical Data page 19
Paddle Covers page 48
Lamps and LEDs page 58
Accessories page 57
Mounting Dimensions pages 59, 62
15 thru 24 VDC devices have internal
resistor to maintain current at nominal
20 mA.
1UL recognized, CSA certified.
**
*AML25 Series: 1 pole and
2-pole only.
AML25 ORDER GUIDE
AML25 F B B 2 AA 01 R X
Housing Operator/ LED Terminal Type/ Circuitry Operating LED Color LED Color
Type Bezel Color Voltage Diode Protection Codes Code (LED A) (LED B)
AML25 F B B 2 Insert code Insert code RR
Rectangular Black/Black V* .110 ×.020 letters numbers Red Red
1 LED (Solder or Q-C) as shown in from YY
CCircuitry Operating Yellow Yellow
AML25 G 5V 3Chart Action GG
Rectangular .025 ×.025 Chart Green Green
2 LED’s D(Printed Ckt.,
LED version
XX
10 V or Push-On
available
No LED No LED
only withE8
AA15 V .110 ×.020
BAw/Diode
CAF protection
DA24 V
circuitry
*See LED application information for devices without current-limiting resistor, page 58.
Example: AML25FBB2AA01RX
Rectangular paddle switch; illuminated
with one red LED, this device has a black
paddle and bezel, and .110 ×.020 termi-
nals; with one circuit ON and one circuit
OFF in each extreme operator position
(maintained).
NOTE: For further information on re-
placement LED’s, call the 800 number.
Covers
ordered
separately
1The ‘‘MICRO SWITCH’’ identification is
shown on this side of the switch housings.
Manuals
