Type TDC Solid Tantalum Capacitors
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Specications
Highlights
♦ Tough plastic case
♦ Low DCL
♦ Low ESR and impedance
♦ Low cost
♦ Temperature stable
♦ UL94VO ammability rating
♦ Resistant to shock and vibration
Capacitance Range:
Voltage Range:
Tolerance:
Operating Temperature Range:
DC Leakage:
Capacitance Change Maximum:
Reverse Voltage (Non-continuous):
Reel Packaging:
0.10 µF to 330 µF
6 WVdc to 50 WVdc at 85 ºC
±10%, ±20%
–55 ºC to +125 ºC (with proper derating)
+25 ºC - See ratings limit
+85 ºC - 10 x ratings limit
+125 ºC - 12.5 x ratings limit
–10% @ –55 ºC
+10% @ +85 ºC
+12% @ +125 ºC
15% of rated voltage @ 25 ºC
5% of rated voltage @ 85 ºC
1% of rated voltage @ 125 ºC
As a low cost alternative to molded solid tantalum ca-
pacitors, the Type TDC, constructed in a tough, radial
dipped ame retardant plastic case, assures the user
that it is a top performer with such attributes as low
DCL, low ESR, low impedance and a great value with
low in-place cost. The Type TDC is high shock and
vibration resistant and is available in bulk or on radial
Case Quantity
Code per Reel
E 1,000
F 1,000
G 1,000
Dipped, Radial Leaded, Solid Tantalum Capacitors
Complies with the EU Directive 2002/95/EC
requirement restricting the use of Lead (Pb), Mercury
(Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)),
PolyBrominated Biphenyls (PBB) and PolyBrominated
Diphenyl Ethers (PBDE).
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type TDC Solid Tantalum Capacitors
Capacitor Outline Drawing
Ratings
* Indicates capacitance tolerance: K = ±10%, M = ±20%, (J = ±5%, Special Order)
CDE reserves the right to substitute a tighter tolerance, higher voltage capacitor within the same case size.
Dimensions - Inches (Millimeters)
Case Leads
Code D (Max.) H (Max.) S Code
E .175 (4.45) .350 (8.89) .125 (3.17) (Standard) N
.250 (6.35) (Special) W
F .250 (6.35) .500 (12.7) .125 (3.17) (Standard) N
.250 (6.35) (Special) W
G .350 (8.89) .650 (16.51) .250 (6.35) (Special) W
.250 ±.025
(6.35 ±.64
D
Max
H
Max
H
Max
D
Max
.187 ±.032
(4.75 ±.81)
.187 ±.032
(4.75 ±.81)
S S
.020
(.51)
M
M
106
10
++
107
10
.020
(.51)
E and F Case Codes:
Lead Spacing = .125 ±.025
(3.17 ±.64)
G Case Code:
Lead Spacing = .250 ±.025
(6.34 ±.64)
Max. Max. DF Max. Max. DF
Catalog Case Lead DCL @ +25 ºC Catalog Case Lead DCL @ +25 ºC
Cap Part Number Code Spacing @ +25 ºC 120 Hz Cap Part Number Code Spacing @ +25 ºC 120 Hz
(µF) (S) (µA) (%) (µF) (S) (µA) (%)
6 WVdc; 8 Vdc Surge @ 85 ºC 10 WVdc; 13 Vdc Surge @ 85 ºC
4 WVdc; 5 Vdc Surge @ 125 ºC 7 WVdc; 9 Vdc Surge @ 125 ºC
3.3 TDC335*006NSE-F E 0.125 0.5 5 2.2 TDC225*010NSE-F E 0.125 0.5 5
3.9 TDC395*006NSE-F E 0.125 0.5 5 2.7 TDC275*010NSE-F E 0.125 0.5 5
4.7 TDC475*006NSE-F E 0.125 0.5 5 3.3 TDC335*010NSE-F E 0.125 0.5 5
5.6 TDC565*006NSE-F E 0.125 0.5 5 3.9 TDC395*010NSE-F E 0.125 0.5 5
6.8 TDC685*006NSE-F E 0.125 0.5 5 4.7 TDC475*010NSE-F E 0.125 0.5 5
8.2 TDC825*006NSE-F E 0.125 0.5 6 5.6 TDC565*010NSE-F E 0.125 0.5 5
10 TDC106*006NSE-F E 0.125 0.5 6 6.8 TDC685*010NSE-F E 0.125 0.5 5
12 TDC126*006NSE-F E 0.125 0.6 6 8.2 TDC825*010NSE-F E 0.125 0.7 6
15 TDC156*006NSF-F F 0.125 0.7 6 10 TDC106*010NSF-F F 0.125 0.8 6
18 TDC186*006NSF-F F 0.125 0.9 6 12 TDC126*010NSF-F F 0.125 1.0 6
22 TDC226*006NSF-F F 0.125 1.1 6 15 TDC156*010NSF-F F 0.125 1.2 6
27 TDC276*006NSF-F F 0.125 1.3 6 18 TDC186*010NSF-F F 0.125 1.4 6
33 TDC336*006NSF-F F 0.125 1.6 6 22 TDC226*010NSF-F F 0.125 1.8 6
39 TDC396*006NSF-F F 0.125 1.9 6 27 TDC276*010NSF-F F 0.125 2.2 6
47 TDC476*006NSF-F F 0.125 2.3 6 33 TDC336*010NSF-F F 0.125 2.6 6
56 TDC566*006NSF-F F 0.125 2.7 6 39 TDC396*010NSF-F F 0.125 3.1 6
68 TDC686*006NSF-F F 0.125 3.3 6 47 TDC476*010NSF-F F 0.125 3.8 6
82 TDC826*006NSF-F F 0.125 3.9 8 56 TDC566*010NSF-F F 0.125 4.5 6
100 TDC107*006NSF-F F 0.125 4.8 8 68 TDC686*010NSF-F F 0.125 5.4 6
120 TDC127*006WSG-F G 0.25 5.8 8 82 TDC826*010WSG-F G 0.25 6.6 8
150 TDC157*006WSG-F G 0.25 7.2 8 100 TDC107*010WSG-F G 0.25 8.0 8
180 TDC187*006WSG-F G 0.25 8.6 8 120 TDC127*010WSG-F G 0.25 9.6 8
220 TDC227*006WSG-F G 0.25 10 8 150 TDC157*010WSG-F G 0.25 10.0 8
270 TDC277*006WSG-F G 0.25 10 8 180 TDC187*010WSG-F G 0.25 10.0 8
330 TDC337*006WSG-F G 0.25 10 8 220 TDC227*010WSG-F G 0.25 10.0 8
Type TDC Solid Tantalum Capacitors
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
* Indicates capacitance tolerance: K = ±10%, M = ±20%, (J = ±5%, Special Order)
CDE reserves the right to substitute a tighter tolerance, higher voltage capacitor within the same case size.
Dimensions - Inches (Millimeters)
Case Leads
Code D (Max.) H (Max.) S Code
E .175 (4.45) .350 (8.89) .125 (3.17) (Standard) N
.250 (6.35) (Special) W
F .250 (6.35) .500 (12.7) .125 (3.17) (Standard) N
.250 (6.35) (Special) W
G .350 (8.89) .650 (16.51) .250 (6.35) (Special) W
Max. Max. DF Max. Max. DF
Catalog Case Lead DCL @ +25 ºC Catalog Case Lead DCL @ +25 ºC
Cap Part Number Code Spacing @ +25 ºC 120 Hz Cap Part Number Code Spacing @ +25 ºC 120 Hz
(µF) (S) (µA) (%) (µF) (S) (µA) (%)
16 WVdc; 20 Vdc Surge @ 85 ºC 20 WVdc; 26 Vdc Surge @ 85 ºC
10 WVdc; 12 Vdc Surge @ 125 ºC 13 WVdc; 16 Vdc Surge @ 125 ºC
1.5 TDC155*016NSE-F E 0.125 0.5 5 8.2 TDC825*020NSF-F F 0.125 1.3 6
1.8 TDC185*016NSE-F E 0.125 0.5 5 10 TDC106*020NSF-F F 0.125 1.6 6
2.2 TDC225*016NSE-F E 0.125 0.5 5 12 TDC126*020NSF-F F 0.125 1.9 6
2.7 TDC275*016NSE-F E 0.125 0.5 5 15 TDC156*020NSF-F F 0.125 2.4 6
3.3 TDC335*016NSE-F E 0.125 0.5 5 18 TDC186*020NSF-F F 0.125 2.9 6
3.9 TDC395*016NSE-F E 0.125 0.5 5 22 TDC226*020NSF-F F 0.125 3.5 6
4.7 TDC475*016NSE-F E 0.125 0.6 5 33 TDC336*020WSG-F G 0.25 5.3 6
5.6 TDC565*016NSE-F E 0.125 0.7 5 39 TDC396*020WSG-F G 0.25 6.2 6
6.8 TDC685*016NSE-F E 0.125 0.9 5 47 TDC476*020WSG-F G 0.25 7.5 6
8.2 TDC825*016NSE-F E 0.125 1.0 6 56 TDC566*020WSG-F G 0.25 9.0 6
10 TDC106*016NSF-F F 0.125 1.3 6 68 TDC686*020WSG-F G 0.25 10.0 6
12 TDC126*016NSF-F F 0.125 1.5 6 82 TDC826*020WSG-F G 0.25 10.0 8
15 TDC156*016NSF-F F 0.125 1.8 6 100 TDC107*020WSG-F G 0.25 10.0 8
18 TDC186*016NSF-F F 0.125 2.2 6 25 WVdc; 32 Vdc Surge @ 85 ºC
22 TDC226*016NSF-F F 0.125 2.6 6 17 WVdc; 22 Vdc Surge @ 125 ºC
27 TDC276*016NSF-F F 0.125 3.2 6 1.0 TDC105*025NSE-F E 0.125 0.50 3
33 TDC336*016NSF-F F 0.125 4.0 6 1.2 TDC125*025NSE-F E 0.125 0.50 5
39 TDC396*016WSG-F G 0.25 4.7 6 1.5 TDC155*025NSE-F E 0.125 0.50 5
47 TDC476*016WSG-F G 0.25 5.6 6 1.8 TDC185*025NSE-F E 0.125 0.50 5
56 TDC566*016WSG-F G 0.25 6.8 6 2.2 TDC225*025NSE-F E 0.125 0.50 5
68 TDC686*016WSG-F G 0.25 8.2 6 2.7 TDC275*025NSE-F E 0.125 0.50 5
82 TDC826*016WSG-F G 0.25 9.8 8 3.3 TDC335*025NSE-F E 0.125 0.70 5
100 TDC107*016WSG-F G 0.25 10.0 8 3.9 TDC395*025NSE-F E 0.125 0.80 5
120 TDC127*016WSG-F G 0.25 10.0 8 4.7 TDC475*025NSF-F F 0.125 0.90 5
150 TDC157*016WSG-F G 0.25 10.0 8 5.6 TDC565*025NSF-F F 0.125 1.10 5
20 WVdc; 26 Vdc Surge @ 85 ºC 6.8 TDC685*025NSF-F F 0.125 1.40 5
13 WVdc; 16 Vdc Surge @ 125 ºC 8.2 TDC825*025NSF-F F 0.125 1.60 6
1.0 TDC105*020NSE-F E 0.125 0.5 3 10 TDC106*025NSF--F F 0.125 2.0 6
1.2 TDC125*020NSE-F E 0.125 0.5 5 12 TDC126*025NSF-F F 0.125 2.4 6
1.5 TDC155*020NSE-F E 0.125 0.5 5 15 TDC156*025NSF-F F 0.125 3.0 6
1.8 TDC185*020NSE-F E 0.125 0.5 5 18 TDC186*025NSF-F F 0.125 3.6 6
2.2 TDC225*020NSE-F E 0.125 0.5 5 22 TDC226*025NSF-F F 0.125 4.4 6
2.7 TDC275*020NSE-F E 0.125 0.5 5 27 TDC276*025WSG-F G 0.250 5.4 6
3.3 TDC335*020NSE-F E 0.125 0.5 5 33 TDC336*025WSG-F G 0.250 6.6 6
3.9 TDC395*020NSE-F E 0.125 0.6 5 39 TDC396*025WSG-F G 0.250 7.8 6
4.7 TDC475*020NSE-F E 0.125 0.8 5 47 TDC476*025WSG-F G 0.250 9.4 6
5.6 TDC565*020NSF-F F 0.125 0.9 5 56 TDC566*025WSG-F G 0.250 10.0 6
6.8 TDC685*020NSF-F F 0.125 1.1 5 68 TDC686*025WSG-F G 0.250 10.0 6
Ratings
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type TDC Solid Tantalum Capacitors
* Indicates capacitance tolerance: K = ±10%, M = ±20%, (J = ±5%, Special Order)
CDE reserves the right to substitute a tighter tolerance, higher voltage capacitor within the same case size.
Ratings
Max. Max. DF Max. Max. DF
Catalog Case Lead DCL @ +25 ºC Catalog Case Lead DCL @ +25 ºC
Cap Part Number Code Spacing @ +25 ºC 120 Hz Cap Part Number Code Spacing @ +25 ºC 120 Hz
(µF) (S) (µA) (%) (µF) (S) (µA) (%)
35 WVdc; 46 Vdc Surge @ 85 ºC 50 WVdc; 65 Vdc Surge @ 85 ºC
23 WVdc; 28 Vdc Surge @ 125 ºC 33 WVdc; 40 Vdc Surge @ 125 ºC
0.10 TDC104*035NSE-F E 0.125 0.5 3 .10 TDC104*050NSE-F E 0.125 0.5 3
0.12 TDC124*035NSE-F E 0.125 0.5 3 .12 TDC124*050NSE-F E 0.125 0.5 3
0.15 TDC154*035NSE-F E 0.125 0.5 3 .15 TDC154*050NSE-F E 0.125 0.5 3
0.18 TDC184*035NSE-F E 0.125 0.5 3 .18 TDC184*050NSE-F E 0.125 0.5 3
0.22 TDC224*035NSE-F E 0.125 0.5 3 .22 TDC224*050NSE-F E 0.125 0.5 3
0.27 TDC274*035NSE-F E 0.125 0.5 3 .27 TDC274*050NSE-F E 0.125 0.5 3
0.33 TDC334*035NSE-F E 0.125 0.5 3 .33 TDC334*050NSE-F E 0.125 0.5 3
0.39 TDC394*035NSE-F E 0.125 0.5 3 .39 TDC394*050NSE-F E 0.125 0.5 3
0.47 TDC474*035NSE-F E 0.125 0.5 3 .47 TDC474*050NSE-F E 0.125 0.5 3
0.56 TDC564*035NSE-F E 0.125 0.5 3 .56 TDC564*050NSE-F E 0.125 0.5 3
0.68 TDC684*035NSE-F E 0.125 0.5 3 .68 TDC684*050NSE-F E 0.125 0.5 3
0.82 TDC824*035NSE-F E 0.125 0.5 3 .82 TDC824*050NSE-F E 0.125 0.5 3
1.0 TDC105*035NSE-F E 0.125 0.5 3 1.0 TDC105*050NSE-F E 0.125 0.5 3
1.2 TDC125*035NSE-F E 0.125 0.5 5 1.2 TDC125*050NSE-F E 0.125 0.5 5
1.5 TDC155*035NSE-F E 0.125 0.5 5 1.5 TDC155*050NSE-F E 0.125 0.6 5
1.8 TDC185*035NSE--F E 0.125 0.5 5 1.8 TDC185*050NSF-F F 0.125 0.7 5
2.2 TDC225*035NSE-F E 0.125 0.6 5 2.2 TDC225*050NSF-F F 0.125 0.9 5
2.7 TDC275*035NSF-F F 0.125 0.7 5 2.7 TDC275*050NSF-F F 0.125 1.1 5
3.3 TDC335*035NSF-F F 0.125 0.9 5 3.3 TDC335*050NSF-F F 0.125 1.3 5
3.9 TDC339*035NSF-F F 0.125 1.0 5 3.9 TDC395*050NSF-F F 0.125 1.6 5
4.7 TDC475*035NSF-F F 0.125 1.3 5 4.7 TDC475*050NSF-F F 0.125 1.9 5
5.6 TDC565*035NSF-F F 0.125 1.6 5 5.6 TDC565*050NSF-F F 0.125 2.2 5
6.8 TDC685*035NSF-F F 0.125 1.9 5 6.8 TDC685*050WSG-F G 0.25 2.7 5
8.2 TDC825*035NSF-F F 0.125 2.3 6 8.2 TDC825*050WSG-F G 0.25 3.3 6
10 TDC106*035NSF-F F 0.125 2.8 6 10 TDC106*050WSG-F G 0.25 4.0 6
12 TDC126*035WSG-F G 0.25 3.4 6 12 TDC126*050WSG-F G 0.25 4.8 6
15 TDC156*035WSG-F G 0.25 4.2 6 15 TDC156*050WSG-F G 0.25 6.0 6
18 TDC186*035WSG-F G 0.25 5.0 6 18 TDC186*050WSG-F G 0.25 7.2 6
22 TDC226*035WSG-F G 0.25 6.2 6 22 TDC226*050WSG-F G 0.25 8.8 6
27 TDC276*035WSG-F G 0.25 7.6 6
33 TDC336*035WSG-F G 0.25 9.2 6
39 TDC396*035WSG-F G 0.25 10 6
47 TDC476*035WSG-F G 0.25 10 6
Type TDC Solid Tantalum Capacitors
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Part Numbering System
TDC 107 K 016 W S G –F
Lead Lead Case RoHS
Series Capacitance Tolerance Voltage Spacing Length Code Compliant
TDC 394 = 0.39 µF J = ±5% 006 = 6 Vdc N = .125 S = .187 E –F = Compliant
105 = 1.0 µF K = ±10% 010 = 10 Vdc W = .250 T = Tape
& Reel
F Blank = Not
225 = 2.2 µF M = ±20% 016 = 16 Vdc GCompliant
186 = 18 µF 020 = 20 Vdc
107 = 100 µF 025 = 25 Vdc
035 = 35 Vdc
050 = 50 Vdc
Notice and Disclaimer: All product drawings, descriptions, specications, statements, information and data
(collectively, the “Information”) in this datasheet or other publication are subject to change. The customer
is responsible for checking, conrming and verifying the extent to which the Information contained in this
datasheet or other publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation
or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based
on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has
of operating conditions that such Cornell Dubilier company regards as typical for such applications, but
are not intended to constitute any guarantee, warranty or representation regarding any such matter – and
Cornell Dubilier specically and expressly disclaims any guarantee, warranty or representation concerning
the suitability for a specic customer application, use, storage, transportation, or operating environment.
The Information is intended for use only by customers who have the requisite experience and capability to
determine the correct products for their application. Any technical advice inferred from this Information or
otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given
gratis (unless otherwise specied by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability
for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality
and safety standards regarding the design and manufacturing of its products, in light of the current state
of the art, isolated component failures may still occur. Accordingly, customer applications which require a
high degree of reliability or safety should employ suitable designs or other safeguards (such as installation
of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the
failure of an electrical component does not result in a risk of personal injury or property damage. Although
all product-related warnings, cautions and notes must be observed, the customer should not assume that all
safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be
required.