DATA SH EET
Product specification
Supersedes data of April 1999
File under BCcomponents, BC05
2001 Jun 22
BCcomponents
MKT 370/371/372 /373
Metallized polyester film capacitors
2001 Jun 22 2
BCcomponents Product specification
Metallized polyester film capacitors MKT 370/371/372/373
MKT RADIAL POTTED TYPE PITCH 5/7.5/10/15/22.5/27.5 mm
296x12(full_width)
CBA111
2222 370 2222 3722222 371 2222 373
P = 5 mm P = 7.5 mm P = 10 mm P = 15/22.5/27.5 mm
Fig.1 Simplified outlines.
FEATURES
•Low-inductive wound cel l of
metallized (PETP) film
•Potted with epoxy resin in a
flame-ret arda n t case
•Radial leads of sold er-coated wire
•Withstands solvents and rinsing
liquids
•Small stand-off pips to allow
removal of solde r flux
•Suitable for high density pack agi ng.
APPLICATIONS
•Blocking and coupling
•Bypass and energy reservoir.
DETAIL SPECIFICATION
For more detailed data and test
requirements see “Type detail
specification HQN-384-02/103”.
QUICK REFERENCE DATA
DESCRIPTION VALUE
Capacitance range (E12 series) 0.001 to 15 µF
Capacitance tol erance ±10%; ±5%
Rated (DC) voltage 63 V; 100 V; 250 V ; 400 V; 630 V
Rated (AC ) voltage 40 V; 63 V; 160 V; 220 V; 250 V
Climatic category 55/105/56
Rated temperature 85 °C
Maximum applic ation temperatu re 105 °C
Reference specification IEC 60384-2
Performance grade grade 1 (long life)
Materials qualified in accordanc e with UL94 V-0
2001 Jun 22 3
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 370
COMPOSITI ON OF CATALOGUE NUMBER
TYPE AND PITCHES
370 5.08 mm
TYPE PACKAGING LEAD CONFIGURATION PREFERRED TYPES
C-TOL 63 V 100 V 250 V 400 V
370 ammopack ±10% 75 85 35 65
±5% 76 86 36 66
ON REQUEST
370 loose in box lead length 4.0 mm ±10% 11 21 41 51
±5% 12 22 42 52
lead length 26.0 mm ±10% 15 25 45 55
±5% 16 26 46 56
taped on reel ±10% 18 28 48 58
±5% 19 29 49 59
MULTIPLIER
(nF)
0.1 2
13
10 4
100 5
CAPACITANCE
(numerically)
2222 370 XX XX X
Example:
104 =10 x 10 =100 nF
2001 Jun 22 4
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 371/372/373
TYPE PACKAGING LEAD CONFIGURATION PREFERRED TYPES
C-TOL 63 V 100 V 250 V 400 V 630 V
371 loose in box lead length 4.0 mm ±10% 11 21 41 51 −
±5% 12 22 42 52 −
ammopack ±10% 38 68 78 88 −
±5% 39 69 79 89 −
372 loose in box lead length 4.0 mm ±10% −21 41 51 61
373 loose in box lead length 5.0 mm ±10% −23 43 53 63
ON REQUEST
371 loose in box lead length 26.0 mm ±10% 15 25 45 55 −
±5% 16 26 46 56 −
taped on reel ±10% 35 65 75 85 −
±5% 36 66 76 86 −
372
loose in box lead length 4.0 mm ±5% −22 42 52 62
taped on reel ±10% −25 45 55 65
±5% −26 46 56 66
ammopack ±10% −28 48 58 68
±5% −29 49 59 69
373 loose in box lead length 5.0 mm ±5% −24 44 54 64
taped on reel ±10% −27 47 57 67
±5% −28 48 58 68
2222 37. XX XX X
TYPE AND PITCHES
371 7.5 mm
372 10.0 mm
373 15.0 mm
22.5 mm
27.5 mm
MULTIPLIER
(nF)
0.1 2
13
10 4
100 5
CAPACITANCE
(numerically)
Example:
104 =10 x 10 =100 nF
2001 Jun 22 5
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 370
MKT 370 GENERAL DATA PITCH 5 mm
Specific reference data for the 63 V DC capac itors
Available 63 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C≤0.1 µF≤75 ×10−4≤130 ×10−4≤250 ×10−4
0.1 µF<C≤0.47 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4
0.47 µF<C≤1.5 µF≤75 ×10−4≤130 ×10−4−
Rated voltage pulse slope (dU/dt)R at 63 V (DC) 60 V/µs
R between leads, for C ≤0.33 µF at 10 V; 1 minute >15000 MΩ
RC between leads, for:
0.33 µF<C≤1.0 µF at 10 V; 1 minute >5000 s
C>1.0 µF at 10 V; 1 minute >1000 s
R between interconnected leads and case (foil method) >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 100 V; 1 minute
Withstanding (DC) voltage between leads and case 200 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Ammopack H =18.5 mm; P0=12.7 mm ±10% 2222 370 75... preferred
±5% 2222 370 76... preferred
Loose in box lt=4.0 +1.0/−0.5 mm ±10% 2222 370 11... on request
±5% 2222 370 12... on request
lt=26.0 ±2.0 mm ±10% 2222 370 15... on request
±5% 2222 370 16... on request
Taped on reel H = 18.5 mm ; P0=12.7 mm ±10% 2222 370 18... on request
±5% 2222 370 19... on request
296x12(full_width)
P
h
lt
lb
ØdtCBA112
Fig.4 Outline.
2001 Jun 22 6
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 370
URdc =63 V; URac =40 V
Note
1. F or C =1.2 µF and C =1.5 µF: URdc =50VandU
Rac =32V.
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOG UE NUMBE R
AMMOPACK
H=18.5 mm; P0=12.7 mm
C-tol =±10% C-tol =±5%
catalogue number last 5 digits
Pitch =5.08 ±0.30 mm; dt=0.50 ±0.05 mm
0.056
2.5 ×6.5 ×7.2 0.25
2222 370 75563 .. 76563
0.068 2222 370 75683 .. 76683
0.082 2222 370 75823 .. 76823
0.1 2222 370 75104 .. 76104
0.12 2222 370 75124 .. 76124
0.15 2222 370 75154 .. 76154
0.18 2222 370 75184 .. 76184
0.22
3.5 ×8.0 ×7.2 0.35
2222 370 75224 .. 76224
0.27 2222 370 75274 .. 76274
0.33 2222 370 75334 .. 76334
0.39 2222 370 75394 .. 76394
0.47 2222 370 75474 .. 76474
0.56 4.5 ×9.0 ×7.2 0.45 2222 370 75564 .. 76564
0.68 2222 370 75684 .. 76684
0.82
6.0 ×11.0 ×7.2 0.60
2222 370 75824 .. 76824
12222 370 75105 .. 76105
1.2(1) 2222 370 75125 .. 76125
1.5(1) 2222 370 75155 .. 76155
2001 Jun 22 7
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 370
MKT 370 GENERAL DATA PITCH 5 mm
Specific reference data for the 100 V DC capac itors
Available 100 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C≤0.1 µF≤75 ×10−4≤130 ×10−4≤250 ×10−4
0.1 µF<C≤0.47 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4
Rated voltage pulse slope (dU/dt)R at 100 V (DC) 110 V /µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >15000 MΩ
RC between leads, for C >0.33 µF at 100 V; 1 minute >5000 s
R between interconnected leads and case (foil method) >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 160 V; 1 minute
Withstanding (DC) voltage between leads and case 200 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Ammopack H =18.5 mm; P0=12.7 mm ±10% 2222 370 85... preferred
±5% 2222 370 86... preferred
Loose in box lt=4.0 +1.0/−0.5 mm ±10% 2222 370 21... on request
±5% 2222 370 22... on request
lt=26.0 ±2.0 mm ±10% 2222 370 25... on request
±5% 2222 370 26... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±10% 2222 370 28... on request
±5% 2222 370 29... on request
Fig.5 Outline.
296x12(full_width)
P
h
lt
lb
ØdtCBA112
2001 Jun 22 8
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 370
URdc =100 V; URac =63 V
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOG UE NUMBE R
AMMOPACK
H=18.5 mm; P0=12.7 mm
C-tol =±10% C-tol =±5%
catalogue number last 5 digits
Pitch =5.08 ±0.30 mm; dt=0.50 ±0.05 mm
0.012
2.5 ×6.5 ×7.2 0.25
2222 370 85123 .. 86123
0.015 2222 370 85153 .. 86153
0.018 2222 370 85183 .. 86183
0.022 2222 370 85223 .. 86223
0.027 2222 370 85273 .. 86273
0.033 2222 370 85333 .. 86333
0.039 2222 370 85393 .. 86393
0.047 2222 370 85473 .. 86473
0.056 2222 370 85563 .. 86563
0.068 2222 370 85683 .. 86683
0.082 2222 370 85823 .. 86823
0.10
3.5 ×8.0 ×7.2 0.35
2222 370 85104 .. 86104
0.12 2222 370 85124 .. 86124
0.15 2222 370 85154 .. 86154
0.18 2222 370 85184 .. 86184
0.22 4.5 ×9.0 ×7.2 0.45 2222 370 85224 .. 86224
0.27 2222 370 85274 .. 86274
0.33 2222 370 85334 .. 86334
0.39 6.0 ×11.0 ×7.2 0.65 2222 370 85394 .. 86394
0.47 2222 370 85474 .. 86474
2001 Jun 22 9
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 370
MKT 370 GENERAL DATA PITCH 5 mm
Specific reference data for the 250 V DC capac itors
Available 250 V DC versions
DESCRIPTION VALUE
Tangent of loss angle at 1 kHz at 10 kHz at 100 kHz
≤75 ×10−4≤130 ×10−4≤250 ×10−4
Rated voltage pulse slope (dU/dt)R at 250 V (DC) 330 V /µs
R between leads at 100 V; 1 minute >30000 MΩ
R between interconnected leads and case (foil method) >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 400 V; 1 minute
Withstanding (DC) voltage between leads and case 500 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Ammopack H =18.5 mm; P0=12.7 mm ±10% 2222 370 35... preferred
±5% 2222 370 36... preferred
Loose in box lt=4.0 +1.0/−0.5 mm ±10% 2222 370 41... on request
±5% 2222 370 42... on request
lt=26.0 ±2.0 mm ±10% 2222 370 45... on request
±5% 2222 370 46... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±10% 2222 370 48... on request
±5% 2222 370 49... on request
Fig.6 Outline.
296x12(full_width)
P
h
lt
lb
ØdtCBA112
2001 Jun 22 10
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 370
URdc =250 V; URac =160 V
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOG UE NUMBE R
AMMOPACK
H=18.5 mm; P0=12.7 mm
C-tol =±10% C-tol =±5%
catalogue number last 5 digits
Pitch =5.08 ±0.30 mm; dt=0.50 ±0.05 mm
0.0039
2.5 ×6.5 ×7.2 0.25
2222 370 35392 .. 36392
0.0047 2222 370 35472 .. 36472
0.0056 2222 370 35562 .. 36562
0.0068 2222 370 35682 .. 36682
0.0082 2222 370 35822 .. 36822
0.01 2222 370 35103 .. 36103
0.012 2222 370 35123 .. 36123
0.015 2222 370 35153 .. 36153
0.018 2222 370 35183 .. 36183
0.022 3.5 ×8.0 ×7.2 0.35 2222 370 35223 .. 36223
0.027 2222 370 35273 .. 36273
0.033 2222 370 35333 .. 36333
0.039 4.5 ×9.0 ×7.2 0.45 2222 370 35393 .. 36393
0.047 2222 370 35473 .. 36473
0.056 2222 370 35563 .. 36563
0.068 6.0 ×11.0 ×7.2 0.60 2222 370 35683 .. 36683
0.082 2222 370 35823 .. 36823
0.1 2222 370 35104 .. 36104
2001 Jun 22 11
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 370
MKT 370 GENERAL DATA PITCH 5 mm
Specific reference data for the 400 V DC capac itors
Available 400 V DC versions
DESCRIPTION VALUE
Tangent of loss angle at 1 kHz at 10 kHz at 100 kHz
≤75 ×10−4≤130 ×10−4≤250 ×10−4
Rated voltage pulse slope (dU/dt)R at 400 V (DC) 630 V /µs
R between leads at 100 V; 1 minute >30000 MΩ
R between interconnected leads and case (foil method) >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 640 V; 1 minute
Withstanding (DC) voltage between leads and case 800 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Ammopack H =18.5 mm; P0=12.7 mm ±10% 2222 370 65... preferred
±5% 2222 370 66... preferred
Loose in box lt= 4.0 +1.0/−0.5 mm ±10% 2222 370 51... on request
±5% 2222 370 52... on request
lt=26.0 ±2.0 mm ±10% 2222 370 55... on request
±5% 2222 370 56... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±10% 2222 370 58... on request
±5% 2222 370 59... on request
Fig.7 Outline.
296x12(full_width)
P
h
lt
lb
ØdtCBA112
2001 Jun 22 12
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 370
URdc =400 V; URac =220 V
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOG UE NUMBE R
AMMOPACK
H=18.5 mm; P0=12.7 mm
C-tol =±10% C-tol =±5%
catalogue number last 5 digits
Pitch =5.08 ±0.30 mm; dt=0.50 ±0.05 mm
0.001
2.5 ×6.5 ×7.2 0.25
2222 370 65102 .. 66102
0.0012 2222 370 65122 .. 66122
0.0015 2222 370 65152 .. 66152
0.0018 2222 370 65182 .. 66182
0.0022 2222 370 65222 .. 66222
0.0027 2222 370 65272 .. 66272
0.0033 2222 370 65332 .. 66332
0.0039 2222 370 65392 .. 66392
0.0047 2222 370 65472 .. 66472
0.0056 2222 370 65562 .. 66562
0.0068 2222 370 65682 .. 66682
0.0082 2222 370 65822 .. 66822
0.01 3.5 ×8.0 ×7.2 0.35 2222 370 65103 .. 66103
0.012 2222 370 65123 .. 66123
0.015 2222 370 65153 .. 66153
0.018 4.5 ×9.0 ×7.2 0.45 2222 370 65183 .. 66183
0.022 2222 370 65223 .. 66223
0.027 2222 370 65273 .. 66273
0.033 6.0 ×11.0 ×7.2 0.60 2222 370 65333 .. 66333
0.039 2222 370 65393 .. 66393
0.047 2222 370 65473 .. 66473
2001 Jun 22 13
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 371
MKT 371 GENERAL DATA PITCH 7.5 mm
Specific reference data for the 63 V DC capac itors
Available 63 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C≤0.1 µF≤75 ×10−4≤130 ×10−4≤250 ×10−4
0.1 µF<C≤0.47 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4
0.47 µF<C≤1.0 µF≤75 ×10−4≤130 ×10−4−
Rated voltage pulse slope (dU/dt)R at 63 V (DC) 18 V/µs
R between leads, for C ≤0.33 µF at 10 V; 1 minute >15000 MΩ
RC between leads, for C >0.33 µF at 10 V; 1 minute >5000 s
R between interconnected leads and case (foil method) >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 100 V; 1 minute
Withstanding (DC) voltage between leads and case 200 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±10% 2222 371 11... preferred
±5% 2222 371 12... preferred
Ammopack H =18.5 mm; P0=12.7 mm ±10% 2222 371 38... preferred
±5% 2222 371 39... preferred
Loose in box lt=26.0 ±2.0 mm ±10% 2222 371 15... on request
±5% 2222 371 16... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±10% 2222 371 35... on request
±5% 2222 371 36... on request
296x12(full_width)
CBA113
l
h
lt
b
Ødt
P
Fig.8 Outline.
2001 Jun 22 14
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 371
URdc =63 V; URac =40 V
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX A MMOPACK
lt=4.0 +1.0/−0.5 mm H =18.5 mm; P0=12.7 mm
C-tol =±10% C-tol =±5% C-tol =±10% C-tol =±5%
catalogue numbe r last 5 digits last 5 digits
Pitch =7.62 +0.30/−0.40 mm; dt=0.50 ±0.05 mm
0.056
2.5 ×6.5 ×10.0 0.3
2222 371 11563 .. 12563 .. 38563 .. 39563
0.068 2222 371 11683 .. 12683 .. 38683 .. 39683
0.082 2222 371 11823 .. 12823 .. 38823 .. 39823
0.1 2222 371 11104 .. 12104 .. 38104 .. 39104
0.12
3.0 ×8.0 ×10.0 0.4
2222 371 11124 .. 12124 .. 38124 .. 39124
0.15 2222 371 11154 .. 12154 .. 38154 .. 39154
0.18 2222 371 11184 .. 12184 .. 38184 .. 39184
0.22 2222 371 11224 .. 12224 .. 38224 .. 39224
0.27
4.0 ×9.0 ×10.0 0.5
2222 371 11274 .. 12274 .. 38274 .. 39274
0.33 2222 371 11334 .. 12334 .. 38334 .. 39334
0.39 2222 371 11394 .. 12394 .. 38394 .. 39394
0.47 2222 371 11474 .. 12474 .. 38474 .. 39474
0.56 2222 371 11564 .. 12564 .. 38564 .. 39564
0.68 2222 371 11684 .. 12684 .. 38684 .. 39684
0.82 5.0 ×10.5 ×10.0 0.7 2222 371 11824 .. 12824 .. 38824 .. 39824
1.0 2222 371 11105 .. 12105 .. 38105 .. 39105
2001 Jun 22 15
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 371
MKT 371 GENERAL DATA PITCH 7.5 mm
Specific reference data for the 100 V DC capac itors
Available 100 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C≤0.1 µF≤75 ×10−4≤130 ×10−4≤250 ×10−4
0.1 µF<C≤0.47 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4
Rated voltage pulse slope (dU/dt)R at 100 V (DC) 36 V/µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >15000 MΩ
RC between leads, for C >0.33 µF at 100 V; 1 minute >5000 s
R between interconnected leads and case (foil method) >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 160 V; 1 minute
Withstanding (DC) voltage between leads and case 200 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±10% 2222 371 21... preferred
±5% 2222 371 22... preferred
Ammopack H =18.5 mm; P0=12.7 mm ±10% 2222 371 68... preferred
±5% 2222 371 69... preferred
Loose in box lt=26.0 ±2.0 mm ±10% 2222 371 25... on request
±5% 2222 371 26... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±10% 2222 371 65... on request
±5% 2222 371 66... on request
Fig.9 Outline.
296x12(full_width)
CBA113
l
h
lt
b
Ødt
P
2001 Jun 22 16
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 371
URdc =100 V; URac =63 V
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX A MMOPACK
lt=4.0 +1.0/−0.5 mm H =18.5 mm; P0=12.7 mm
C-tol =±10% C-tol =±5% C-tol =±10% C-tol =±5%
catalogue numbe r last 5 digits last 5 digits
Pitch =7.62 +0.30/−0.40 mm; dt=0.50 ±0.05 mm
0.018
2.5 ×6.5 ×10.0 0.3
2222 371 21183 .. 22183 .. 68183 .. 69183
0.022 2222 371 21223 .. 22223 .. 68223 .. 69223
0.027 2222 371 21273 .. 22273 .. 68273 .. 69273
0.033 2222 371 21333 .. 22333 .. 68333 .. 69333
0.039 2222 371 21393 .. 22393 .. 68393 .. 69393
0.047 2222 371 21473 .. 22473 .. 68473 .. 69473
0.056
3.0 ×8.0 ×10.0 0.4
2222 371 21563 .. 22563 .. 68563 .. 69563
0.068 2222 371 21683 .. 22683 .. 68683 .. 69683
0.082 2222 371 21823 .. 22823 .. 68823 .. 69823
0.1 2222 371 21104 .. 22104 .. 68104 .. 69104
0.12
4.0 ×9.0 ×10.0 0.5
2222 371 21124 .. 22124 .. 68124 .. 69124
0.15 2222 371 21154 .. 22154 .. 68 154 .. 69154
0.18 2222 371 21184 .. 22184 .. 68184 .. 69184
0.22 2222 371 21224 .. 22224 .. 68224 .. 69224
0.27
5.0 ×10.5 ×10.0 0.7
2222 371 21274 .. 22274 .. 68274 .. 69274
0.33 2222 371 21334 .. 22334 .. 68334 .. 69334
0.39 2222 371 21394 .. 22394 .. 68394 .. 69394
0.47 2222 371 21474 .. 22474 .. 68474 .. 69474
2001 Jun 22 17
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 371
MKT 371 GENERAL DATA PITCH 7.5 mm
Specific reference data for the 250 V DC capac itors
Available 250 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C≤0.1 µF≤75 ×10−4≤130 ×10−4≤250 ×10−4
0.1 µF<C≤0.12 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4
Rated voltage pulse slope (dU/dt)R at 250 V (DC) 70 V/µs
R between leads at 100 V; 1 minute >30000 MΩ
R between interconnected leads and case (foil method) >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 400 V; 1 minute
Withstanding (DC) voltage between leads and case 500 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±10% 2222 371 41... preferred
±5% 2222 371 42... preferred
Ammopack H =18.5 mm; P0=12.7 mm ±10% 2222 371 78... preferred
±5% 2222 371 79... preferred
Loose in box lt=26.0 ±2.0 mm ±10% 2222 371 45... on request
±5% 2222 371 46... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±10% 2222 371 75... on request
±5% 2222 371 76... on request
Fig.10 Outline.
296x12(full_width)
CBA113
l
h
lt
b
Ødt
P
2001 Jun 22 18
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 371
URdc =250 V; URac =160 V
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX A MMOPACK
lt=4.0 +1.0/−0.5 mm H =18.5 mm; P0=12.7 mm
C-tol =±10% C-tol =±5% C-tol =±10% C-tol =±5%
catalogue numbe r last 5 digits last 5 digits
Pitch =7.62 +0.30/−0.40 mm; dt=0.50 ±0.05 mm
0.0082
2.5 ×6.5 ×10.0 0.3
2222 371 41822 .. 42822 .. 78822 .. 79822
0.01 2222 371 41103 .. 42103 .. 78103 .. 79103
0.012 2222 371 41123 .. 42123 .. 78123 .. 79123
0.015 2222 371 41153 .. 42153 .. 78153 .. 79153
0.018
3.0 ×8.0 ×10.0 0.4
2222 371 41183 .. 42183 .. 78183 .. 79183
0.022 2222 371 41223 .. 42223 .. 78223 .. 79223
0.027 2222 371 41273 .. 42273 .. 78273 .. 79273
0.033 2222 371 41333 .. 42333 .. 78333 .. 79333
0.039 2222 371 41393 .. 42393 .. 78393 .. 79393
0.047 2222 371 41473 .. 42473 .. 78473 .. 79473
0.056
4.0 ×9.0 ×10.0 0.5
2222 371 41563 .. 42563 .. 78563 .. 79563
0.068 2222 371 41683 .. 42683 .. 78683 .. 79683
0.082 2222 371 41823 .. 42823 .. 78823 .. 79823
0.1 2222 371 41104 .. 42104 .. 78104 .. 79104
0.12 5.0 ×10.5 ×10.0 0.7 2222 371 41124 .. 42124 .. 78124 .. 79124
2001 Jun 22 19
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 371
MKT 371 GENERAL DATA PITCH 7.5 mm
Specific reference data for the 400 V DC capac itors
Available 400 V DC versions
DESCRIPTION VALUE
Tangent of loss angle at 1 kHz at 10 kHz at 100 kHz
≤75 ×10−4≤130 ×10−4≤250 ×10−4
Rated voltage pulse slope (dU/dt)R at 400 V (DC) 190 V /µs
R between leads at 100 V; 1 minute >30000 MΩ
R between interconnected leads and case (foil method) >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 640 V; 1 minute
Withstanding (DC) voltage between leads and case 800 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±10% 2222 371 51... preferred
±5% 2222 371 52... preferred
Ammopack H =18.5 mm; P0=12.7 mm ±10% 2222 371 88... preferred
±5% 2222 371 89... preferred
Loose in box lt=26.0 ±2.0 mm ±10% 2222 371 55... on request
±5% 2222 371 56... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±10% 2222 371 85... on request
±5% 2222 371 86... on request
Fig.11 Outline.
296x12(full_width)
CBA113
l
h
lt
b
Ødt
P
2001 Jun 22 20
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 371
URdc =400 V; URac =220 V
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX A MMOPACK
lt=4.0 +1.0/−0.5 mm H =18.5 mm; P0=12.7 mm
C-tol =±10% C-tol =±5% C-tol =±10% C-tol =±5%
catalogue numbe r last 5 digits last 5 digits
Pitch =7.62 +0.30/−0.40 mm; dt=0.50 ±0.05 mm
0.0039
2.5 ×6.5 ×10.0 0.3
2222 371 51392 .. 52392 .. 88392 .. 89392
0.0047 2222 371 51472 .. 52472 .. 88472 .. 89472
0.0056 2222 371 51562 .. 52562 .. 88562 .. 89562
0.0068 2222 371 51682 .. 52682 .. 88682 .. 89682
0.0082 3.0 ×8.0 ×10.0 0.4 2222 371 51822 .. 52822 .. 88822 .. 89822
0.01 2222 371 51103 .. 52103 .. 88103 .. 89103
0.012 4.0 ×9.0 ×10.0 0.5 2222 371 51123 .. 52123 .. 8 8123 .. 89123
0.015 2222 371 51153 .. 52153 .. 88153 .. 89153
0.018
5.0 ×10.5 ×10.0 0.7
2222 371 51183 .. 52183 .. 88183 .. 89183
0.022 2222 371 51223 .. 52223 .. 88223 .. 89223
0.027 2222 371 51273 .. 52273 .. 88273 .. 89273
0.033 2222 371 51333 .. 52333 .. 88333 .. 89333
0.039 2222 371 51393 .. 52393 .. 88393 .. 89393
2001 Jun 22 21
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 372
MKT 372 GENERAL DATA PITCH 10 mm
Specific reference data for the 100 V DC capac itors
Available 100 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C≤0.1 µF≤75 ×10−4≤130 ×10−4≤250 ×10−4
0.1 µF<C≤0.68 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4
Rated voltage pulse slope (dU/dt)R at 100 V (DC) 34 V/µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >15000 MΩ
RC between leads, for C >0.33 µF at 100 V; 1 minute >5000 s
R between interconnected leads and case (foil method) >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 160 V; 1 minute
Withstanding (DC) voltage between leads and case 200 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±10% 2222 372 21... preferred
±5% 2222 372 22... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±10% 2222 372 25... on request
±5% 2222 372 26... on request
Ammopack H =18.5 mm; P0=12.7 mm ±10% 2222 372 28... on request
±5% 2222 372 29... on request
296x12(full_width) l
h
lt
PØdt
b
CBA114
Fig.12 Outline.
2001 Jun 22 22
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 372
URdc =100V; URac =63 V
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER
LOO SE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±10%
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm
0.1
4.0 ×10.0 ×12.5 0.7
2222 372 21104
0.12 2222 372 21124
0.15 2222 372 21154
0.18 2222 372 21184
0.22 2222 372 21224
0.27 2222 372 21274
0.33 2222 372 21334
0.39 5.0 ×11.0 ×12.5 0.9 2222 372 21394
0.47 2222 372 21474
0.56 6.0 ×12.0 ×12.5 1.0 2222 372 21564
0.68 2222 372 21684
2001 Jun 22 23
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 372
MKT 372 GENERAL DATA PITCH 10 mm
Specific reference data for the 250 V DC capac itors
Available 250 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C≤0.1 µF≤75 ×10−4≤130 ×10−4≤250 ×10−4
0.1 µF<C≤0.22 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4
Rated voltage pulse slope (dU/dt)R at 250 V (DC) 50 V/µs
R between leads at 100 V; 1 minute >30000 MΩ
R between interconnected leads and case (foil method) >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 400 V; 1 minute
Withstanding (DC) voltage between leads and case 500 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±10% 2222 372 41... preferred
±5% 2222 372 42... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±10% 2222 372 45... on request
±5% 2222 372 46... on request
Ammopack H =18.5 mm; P0=12.7 mm ±10% 2222 372 48... on request
±5% 2222 372 49... on request
Fig.13 Outline.
296x12(full_width) l
h
lt
PØdt
b
CBA114
2001 Jun 22 24
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 372
URdc =250 V; URac =160 V
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER
LOO SE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±10%
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm
0.047
4.0 ×10.0 ×12.5 0.7
2222 372 41473
0.056 2222 372 41563
0.068 2222 372 41683
0.082 2222 372 41823
0.1 2222 372 41104
0.12 5.0 ×11.0 ×12.5 0.9 2222 372 41124
0.15 2222 372 41154
0.18 6.0 ×12.0 ×12.5 1.0 2222 372 41184
0.22 2222 372 41224
2001 Jun 22 25
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 372
MKT 372 GENERAL DATA PITCH 10 mm
Specific reference data for the 400 V DC capac itors
Available 400 V DC versions
DESCRIPTION VALUE
Tangent of loss angle at 1 kHz at 10 kHz at 100 kHz
≤75 ×10−4≤130 ×10−4≤250 ×10−4
Rated voltage pulse slope (dU/dt)R at 400 V (DC) 80 V/µs
R between leads at 100 V; 1 minute >30000 MΩ
R between interconnected leads and case (foil method) >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 640 V; 1 minute
Withstanding (DC) voltage between leads and case 800 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±10% 2222 372 51... preferred
±5% 2222 372 52... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±10% 2222 372 55... on request
±5% 2222 372 56... on request
Ammopack H =18.5 mm; P0=12.7 mm ±10% 2222 372 58... on request
±5% 2222 372 59... on request
Fig.14 Outline.
296x12(full_width) l
h
lt
PØdt
b
CBA114
2001 Jun 22 26
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 372
URdc =400 V; URac =220 V
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER
LOO SE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±10%
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm
0.0047
4.0 ×10.0 ×12.5 0.7
2222 372 51472
0.0056 2222 372 51562
0.0068 2222 372 51682
0.0082 2222 372 51822
0.01 2222 372 51103
0.012 2222 372 51123
0.015 2222 372 51153
0.018 2222 372 51183
0.022 2222 372 51223
0.027 2222 372 51273
0.033 2222 372 51333
0.039 5.0 ×11.0 ×12.5 0.9 2222 372 51393
0.047 2222 372 51473
0.056 2222 372 51563
0.068 6.0 ×12.0 ×12.5 1.0 2222 372 51683
0.082 2222 372 51823
2001 Jun 22 27
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 372
MKT 372 GENERAL DATA PITCH 10 mm
Specific reference data for the 630 V DC capac itors
Available 630 V DC versions
DESCRIPTION VALUE
Tangent of loss angle at 1 kHz at 10 kHz at 100 kHz
≤75 ×10−4≤130 ×10−4≤250 ×10−4
Rated voltage pulse slope (dU/dt)R at 400 (DC) 120 V/µs
R between leads at 500 V; 1 minute >30000 MΩ
R between interconnected leads and case (foil method) >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1008 V; 1 m inute
Withstanding (DC) voltage between leads and case 1260 V; 1 m inute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±10% 2222 372 61... preferred
±5% 2222 372 62... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±10% 2222 372 65... on request
±5% 2222 372 66... on request
Ammopack H =18.5 mm; P0=12.7 mm ±10% 2222 372 68... on request
±5% 2222 372 69... on request
Fig.15 Outline.
296x12(full_width) l
h
lt
PØdt
b
CBA114
2001 Jun 22 28
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 372
URdc =630 V; URac =250 V
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX
lt =4.0 +1.0/−0.5 mm
C-tol =±10%
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm
0.01
4.0 ×10.0 ×12.5 0.6
2222 372 61103
0.012 2222 372 61123
0.015 2222 372 61153
0.018 2222 372 61183
0.022 2222 372 61223
0.027 5.0 ×11.0 ×12.5 0.9 2222 372 61273
0.033 2222 372 61333
0.039 6.0 ×12.0 ×12.5 1.0 2222 372 61393
0.047 2222 372 61473
2001 Jun 22 29
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 373
MKT 373 GENER AL DATA PITCH 15 mm (COMPACT SIZE)
Specific reference data for the 100 V DC capac itors
Available 100 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
0.33 µF<C≤0.47 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4
0.47 µF<C≤1.0 µF≤75 ×10−4≤130 ×10−4−
1.0 µF<C≤2.2 µF≤75 ×10−4≤150 ×10−4−
Rated voltage pulse slope (dU/dt)R at 100 V (DC): 14 V/µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >15000 MΩ
RC between leads, for C >0.33 µF at 100 V; 1 minute >5000 s
R between interconnected leads and case (foil method) >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 160 V; 1 minute
Withstanding (DC) voltage between leads and case 200 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=5.0 ±1.0 mm ±10% 2222 373 23... preferred
±5% 2222 373 24... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±10% 2222 373 27... on request
±5% 2222 373 28... on request
296x12(full_width) lb
h
lt
Ødt
PCBA115
Fig.16 Outline.
2001 Jun 22 30
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 373
URdc =100 V; URac =63 V (COMPACT SIZE)
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER
LOO SE IN BOX
lt=5.0 ±1.0 mm
C-tol =±10%
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm
0.33
5.0 ×11.0 ×17.5 1.1
2222 373 23334
0.39 2222 373 23394
0.47 2222 373 23474
0.56 2222 373 23564
0.68 2222 373 23684
0.82 2222 373 23824
12222 373 23105
1.2 2222 373 23125
1.5 2222 373 23155
1.8 2222 373 23185
2.2 6.0 ×12.0 ×17.5 1.4 2222 373 23225
2001 Jun 22 31
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 373
MKT 373 GENERAL DATA PITCH 15/22.5/27.5 mm (COMPACT SIZE)
Specific reference data for the 250 V DC capac itors
Available 250 V DC versions
Note
1. Ta ped on reel pitch = 27.5 mm is not available.
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
0.15 µF<C≤0.47 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4
0.47 µF<C≤1.0 µF≤75 ×10−4≤130 ×10−4−
1.0 µF<C≤4.7 µF≤75 ×10−4≤150 ×10−4−
Rated voltage pulse slope (dU/dt)R at 250 V (DC):
P=15 mm 16 V/µs
P=22.5 mm 7V/µs
P=27.5 mm 6V/µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >30000 MΩ
RC between leads, for C >0.33 µF at 100 V; 1 minute >10000 s
R between interconnected leads and case (foil method) >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 400 V; 1 minute
Withstanding (DC) voltage between leads and case 500 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=5.0 ±1.0 mm ±10% 2222 373 43... preferred
±5% 2222 373 44... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±10% 2222 373 47... on request
±5% 2222 373 48... on request
Fig.17 Outline.
296x12(full_width) lb
h
lt
Ødt
PCBA115
2001 Jun 22 32
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 373
URdc =250 V; URac =160 V (COMPACT SIZE)
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER
LOO SE IN BOX
lt=5.0 ±1.0 mm
C-tol =±10%
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm
0.15
5.0 ×11.0 ×17.5 1.1
2222 373 43154
0.18 2222 373 43184
0.22 2222 373 43224
0.27 2222 373 43274
0.33 2222 373 43334
0.39 6.0 ×12.0 ×17.5 1.4 2222 373 43394
0.47 2222 373 43474
0.56 7.0 ×13.5 ×17.5 1.9 2222 373 43564
0.68 2222 373 43684
0.82 8.5 ×15.0 ×17.5 2.6 2222 373 43824
1.0 2222 373 43105
1.2 10.0 ×16.5 ×17.5 3.1 2222 373 43125
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
1.5 8.5 ×18.0 ×26.0 4.4 2222 373 43155
1.8 2222 373 43185
2.2 10.0 ×19.5 ×26.0 5.5 2222 373 43225
2.7 2222 373 43275
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm
3.3 11.0 ×21.0 ×31.0 7.8 2222 373 43335
3.9 13.0 ×23.0 ×31.0 10.4 2222 373 43395
4.7 2222 373 43475
2001 Jun 22 33
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 373
MKT 373 GENERAL DATA PITCH 15/22.5/27.5 mm (COMPACT SIZE)
Specific reference data for the 400 V DC capac itors
Available 400 V DC versions
Note
1. Ta ped on reel pitch = 27.5 mm is not available.
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C≤0.1 µF≤75 ×10−4≤130 ×10−4≤250 ×10−4
0.1 µF<C≤0.47 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4
0.47 µF<C≤1.0 µF≤75 ×10−4≤130 ×10−4−
1.0 µF<C≤1.5 µF≤75 ×10−4≤150 ×10−4−
Rated voltage pulse slope (dU/dt)R at 400 V (DC):
P=15 mm 34 V/µs
P=22.5 mm 14 V/µs
P=27.5 mm 12 V/µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >30000 MΩ
RC between leads, for C >0.33 µF at 100 V; 1 minute >10000 s
R between interconnected leads and case (foil method) >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 640 V; 1 minute
Withstanding (DC) voltage between leads and case 800 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=5.0 ±1.0 mm ±10% 2222 373 53... preferred
±5% 2222 373 54... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±10% 2222 373 57... on request
±5% 2222 373 58... on request
Fig.18 Outline.
296x12(full_width) lb
h
lt
Ødt
PCBA115
2001 Jun 22 34
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 373
URdc =400 V; URac =220 V (COMPACT SIZE)
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER
LOO SE IN BOX
lt=5.0 ±1.0 mm
C-tol =±10%
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm
0.047
5.0 ×11.0 ×17.5 1.1
2222 373 53473
0.056 2222 373 53563
0.068 2222 373 53683
0.082 2222 373 53823
0.1 2222 373 53104
0.12 2222 373 53124
0.15 2222 373 53154
0.18 6.0 ×12.0 ×17.5 1.4 2222 373 53184
0.22 2222 373 53224
0.27 7.0 ×13.5 ×17.5 1.9 2222 373 53274
0.33 2222 373 53334
0.39 8.5 ×15.0 ×17.5 2.6 2222 373 53394
0.47 2222 373 53474
0.56 10.0 ×16.5 ×17.5 3.2 2222 373 53564
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.68 8.5 ×18.0 ×26.0 4.4 2222 373 53684
0.82 2222 373 53824
110.0 ×19.5 ×26.0 5.5 2222 373 53105
1.2 2222 373 53125
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm
1.5 11.0 ×21.0 ×31.0 7.8 2222 373 53155
2001 Jun 22 35
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 373
MKT 373 GENERAL DATA PITCH 15/22.5/27.5 mm (COMPACT SIZE)
Specific reference data for the 630 V DC capac itors
Available 630 V DC versions
Note
1. Ta ped on reel pitch = 27.5 mm is not available.
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C≤0.1 µF≤75 ×10−4≤130 ×10−4≤250 ×10−4
0.1 µF<C≤0.47 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4
0.47 µF<C≤1.0 µF≤75 ×10−4≤130 ×10−4−
Rated voltage pulse slope (dU/dt)R at 630 Vdc:
P=15 mm 90 V/µs
P=22.5 mm 35 V/µs
P=27.5 mm 30 V/µs
R between leads, for C ≤0.33 µF at 500 V; 1 minute >30000 MΩ
RC between leads, for C >0.33 µF at 500 V; 1 minute >10000 s
R between interconnected leads and case (foil method) >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1008 V; 1 m inute
Withstanding (DC) voltage between leads and case 1260 V; 1 m inute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=5.0 ±1.0 mm ±10% 2222 373 63... preferred
±5% 2222 373 64... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±10% 2222 373 67... on request
±5% 2222 373 68... on request
Fig.19 Outline.
296x12(full_width) lb
h
lt
Ødt
PCBA115
2001 Jun 22 36
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 373
URdc =630 V; URac =250 V (COMPACT SIZE)
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER
LOO SE IN BOX
lt =5.0 ±1.0 mm
C-tol =±10%
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm
0.056 5.0 ×11.0 ×17.5 1.1 2222 373 63563
0.068 6.0 ×12.0 ×17.5 1.4 2222 373 63683
0.082 2222 373 63823
0.1 7.0 ×13.5 ×17.5 1.9 2222 373 63104
0.12 2222 373 63124
0.15 8.5 ×15.0 ×17.5 2.6 2222 373 63154
0.18 2222 373 63184
0.22 10.0 ×16.5 ×17.5 3.2 2222 373 63224
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.27 8.5 ×18.0 ×26.0 4.4 2222 373 63274
0.33 2222 373 63334
0.39 10.0 ×19.5 ×26.0 5.5 2222 373 63394
0.47 2222 373 63474
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.56 11.0 ×21.0 ×31.0 7.8 2222 373 63564
0.68 13.0 ×23.0 ×31.0 10.5 2222 373 63684
0.82 2222 373 63824
1 15.0 ×25.0 ×31.0 7.8 2222 373 63105
2001 Jun 22 37
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 373
MKT 373 GENERAL DATA PITCH 15/22.5/27.5 mm (STANDARD SIZE)
Specific reference data for the 100 V DC capac itors
Available 100 V DC versions
Note
1. Ta ped on reel pitch = 27.5 mm is not available.
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
0.33 µF<C≤0.47 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4
0.47 µF<C≤1.0 µF≤75 ×10−4≤130 ×10−4−
1.0 µF<C≤10 µF≤75 ×10−4≤150 ×10−4−
C>10 µF≤75 ×10−4−−
Rated voltage pulse slope (dU/dt)R at 100 V (DC):
P=15 mm 14 V/µs
P=22.5 mm 5V/µs
P=27.5 mm 4V/µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >15000 MΩ
RC between leads, for C >0.33 µF at 100 V; 1 minute >5000 s
R between interconnected leads and case (foil method) >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 160 V; 1 minute
Withstanding (DC) voltage between leads and case 200 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=5.0 ±1.0 mm ±10% 2222 373 21... on request
±5% 2222 373 22... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±10% 2222 373 25... on request
±5% 2222 373 26... on request
Fig.20 Outline.
296x12(full_width) lb
h
lt
Ødt
PCBA115
2001 Jun 22 38
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 373
URdc =100 V; URac =63 V (STANDARD SIZE)
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER
LOO SE IN BOX
lt=5.0 ±1.0 mm
C-tol =±10%
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm
0.33
5.0 ×11.0 ×17.5 1.1
2222 373 21334
0.39 2222 373 21394
0.47 2222 373 21474
0.56 2222 373 21564
0.68 2222 373 21684
0.82 6.0 ×12.0 ×17.5 1.4 2222 373 21824
12222 373 21105
1.2 7.0 ×13.5 ×17.5 1.9 2222 373 21125
1.5 2222 373 21155
1.8 8.5 ×15.0 ×17.5 2.6 2222 373 21185
2.2 2222 373 21225
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
2.7 8.5 ×18.0 ×26.0 4.4 2222 373 21275
3.3 2222 373 21335
3.9 10.0 ×19.5 ×26.0 5.5 2222 373 21395
4.7 2222 373 21475
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm
5.6 11.0 ×21.0 ×31.0 8.0 2222 373 21565
6.8 2222 373 21685
8.2 13.0 ×23.0 ×31.0 10.5 2222 373 21825
10 2222 373 21106
12 18.0 ×28.0 ×31.0 17.5 2222 373 21126
15 2222 373 21156
2001 Jun 22 39
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
MKT 373 GENERAL DATA PITCH 15/22.5/27.5 mm (STANDARD SIZE)
Specific reference data for the 250 V DC capac itors
Available 250 V DC versions
Note
1. Ta ped on reel pitch = 27.5 mm is not available.
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
0.15 µF<C≤0.47 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4
0.47 µF<C≤1.0 µF≤75 ×10−4≤130 ×10−4−
1.0 µF<C≤4.7 µF≤75 ×10−4≤150 ×10−4−
Rated voltage pulse slope (dU/dt)R at 250 V (DC):
P=15 mm 16 V/µs
P=22.5 mm 7V/µs
P=27.5 mm 6V/µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >30000 MΩ
RC between leads, for C >0.33 µF at 100 V; 1 minute >10000 s
R between interconnected leads and case (foil method) >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 400 V; 1 minute
Withstanding (DC) voltage between leads and case 500 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=5.0 ±1.0 mm ±10% 2222 373 41... on request
±5% 2222 373 42... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±10% 2222 373 45... on request
±5% 2222 373 46... on request
Fig.21 Outline.
296x12(full_width) lb
h
lt
Ødt
PCBA115
2001 Jun 22 40
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
URdc =250 V; URac =160 V (STANDARD SIZE)
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER
LOO SE IN BOX
lt=5.0 ±1.0 mm
C-tol =±10%
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm
0.15 5.0 ×11.0 ×17.5 1.1 2222 373 41154
0.18 2222 373 41184
0.22 2222 373 41224
0.27
6.0 ×12.0 ×17.5 1.4
2222 373 41274
0.33 2222 373 41334
0.39 2222 373 41394
0.47 2222 373 41474
0.56 7.0 ×13.5 ×17.5 1.9 2222 373 41564
0.68 2222 373 41684
0.82 8.5 ×15.0 ×17.5 2.6 2222 373 41824
1.0 2222 373 41105
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
1.2 8.5 ×18.0 ×26.0 4.4 2222 373 41125
1.5 2222 373 41155
1.8 10.0 ×19.5 ×26.0 5.5 2222 373 41185
2.2 2222 373 41225
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm
2.7 13.0 ×23.0 ×31.0 10.4 2222 373 41275
3.3 2222 373 41335
3.9 15.0 ×25.0 ×31.0 12.5 2222 373 41395
4.7 2222 373 41475
2001 Jun 22 41
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
MKT 373 GENERAL DATA PITCH 15/22.5/27.5 mm (STANDARD SIZE)
Specific reference data for the 400 V DC capac itors
Available 400 V DC versions
Note
1. Ta ped on reel pitch = 27.5 mm is not available.
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C≤0.1 µF≤75 ×10−4≤130 ×10−4≤250 ×10−4
0.1 µF<C≤0.47 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4
0.47 µF<C≤1.0 µF≤75 ×10−4≤130 ×10−4−
1.0 µF<C≤1.5 µF≤75 ×10−4≤150 ×10−4−
Rated voltage pulse slope (dU/dt)R at 400 V (DC):
P=15 mm 34 V/µs
P=22.5 mm 14 V/µs
P=27.5 mm 12 V/µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >30000 MΩ
RC between leads, for C >0.33 µF at 100 V; 1 minute >10000 s
R between interconnected leads and case (foil method) >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 640 V; 1 minute
Withstanding (DC) voltage between leads and case 800 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=5.0 ±1.0 mm ±10% 2222 373 51... on request
±5% 2222 373 52... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±10% 2222 373 55... on request
±5% 2222 373 56... on request
Fig.22 Outline.
296x12(full_width) lb
h
lt
Ødt
PCBA115
2001 Jun 22 42
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
URdc =400 V; URac =220 V (STANDARD SIZE)
C
(µF)
DIMENSIONS
b×h×l
(mm)
MASS
(g)
CATALOGUE NUMBER
LOO SE IN BOX
lt=5.0 ±1.0 mm
C-tol =±10%
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm
0.047
5.0 ×11.0 ×17.5 1.1
2222 373 51473
0.056 2222 373 51563
0.068 2222 373 51683
0.082 2222 373 51823
0.1 2222 373 51104
0.12 6.0 ×12.0 ×17.5 1.4 2222 373 51124
0.15 2222 373 51154
0.18 7.0 ×13.5 ×17.5 1.9 2222 373 51184
0.22 2222 373 51224
0.27 8.5 ×15.0 ×17.5 2.6 2222 373 51274
0.33 2222 373 51334
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.39 8.5 ×18.0 ×26.0 4.4 2222 373 51394
0.47 2222 373 51474
0.56 10.0 ×19.5 ×26.0 4.4 2222 373 51564
0.68 5.5 2222 373 51684
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.82 11.0 ×21.0 ×31.0 7.8 2222 373 51824
12222 373 51105
1.2 15.0 ×25.0 ×31.0 12.8 2222 373 51125
1.5 2222 373 51155
2001 Jun 22 43
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
CONSTRUCTION
Description
•Low-inductive w ound cell of metallize d polyethyl ene
terephthalate (PETP) film, potted with epoxy resin in a
flame-ret arda n t case
•Radial leads, solde r-coated
•Small stand-off pips allow removal of solder flux etc.
during cleaning of the printed-circuit board.
Mounting
NORMAL USE
The capacitors are designed for mounting on printed-circuit
boards. The capacitors packed in bandoliers are designed
for mounting on printed-circuit boards by automatic
insertion machines.
For detailed tape specifications refer to this handbook,
chapter “Packagi ng info rm ati on ”.
144x12(halfpage)
connecting wire
metallized polyester film
metal spray layer
CBA073
Fig.23 Construction.
SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION
AND SHOCK
In order to withstand vibration and shock tests, it must be
ensured that the stand-off pips are in good contact with the
printed-circui t board:
•For pitches of ≤15 mm capacitors shall be mec hanic ally
fixed by the leads.
•For larger pitches the capacitors shall be mounted in the
same way and the body clamped.
SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD
The maximum length and width of film capacitors is shown
in Fig.24:
•Eccentricity see Fig.24. The maximum eccentricity is
smaller than or equal to the wire diameter of the product
concerned.
•Product height with seating plane as given by
“IEC 60717” as reference: hmax ≤h +0.3 mm.
Storage temperature
•Storage temperature: Tstg =−25 to +40 °C with RH
maximum 80% without conden sation.
RATINGS AND C HARACTERI STICS REFERENCE
CONDITIONS
Unless otherwise specified, all electrical values apply to an
ambient free air temperat ure of 23 ±1°C, an atmospheric
pressure of 86 to 106 kPa and a relative humidity of
50 ±2%.
For reference testing, a conditioning period shall be applied
over 96 ±4 hours by heating the products in a circulating air
oven at the rated temperat ure and a rela tive hum idity not
exceeding 20%.
144x12(halfpage)
CBA116
eccentricity
lmax = l + 0.3 mm
bmax = b + 0.3 mm
Fig.24 Lay-out.
2001 Jun 22 44
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
CHARACTERISTICS
Capacitance
296x12(full_width
CBA117
-3
2
10 5
10 4
10 3
10 2
-2
-1
0
1
f (Hz)
C/C
(%)
∆
Fig.25 Capacitance change as a function of frequency; typical curve.
296x12(full_width) CBA932
100-60 -20 6020
4
2
0
-2
-4
-6
6
max.
min.
Tamb (°C)
∆C/C
(%)
typical
a
b
c
d
e
a. 63V, MKT 370; 0.12 to 1.5 µF
b. 400V and 630 V series
c. 250V series
d. 100V series
e. 63V except MKT 370; 0.12 to 1.5 µF
Fig.26 Capacitan ce chang e at 1 k Hz as a function of ambien t free air tempe rat ure.
2001 Jun 22 45
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
Impedance
Maximum DC and AC voltage as a function of temperature
296x12(full_width
108
CBA119
107
106
105
104
102
10-3
10-2
10-1
100
101
f (Hz)
Impedance
(Ω)
250V; 10 nF
63V; 100 nF
63V; 1 µF
MKT 370
Fig.27 Impedance as a function of frequency; typical curves.
296x12(full_width)
0 20406080100
Tamb (°C)
CBB332
-60 -40 -20
1.2
1.0
0.8
0.6
0.4
0.2
0
factor
Fig.28 Multiplying factor for DC and AC voltage as a function of temperature.
2001 Jun 22 46
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
Maximum RMS voltage (sinewave) as a function of frequency
296x12(full_width)
AC voltage
(V)
f (Hz)
CBA120
105
104
103
102
101
102
100
101
MKT 370
56 nF
100 nF
220 nF
1000 nF
Fig.29 AC voltage (RMS value ) as a function of frequency at Tamb ≤85 °C for URdc =63 V.
296x12(full_width)
AC voltage
(V)
f (Hz)
CBA788
105
104
103
102
101
102
100
101
MKT 370
100 nF
1000 nF
56 nF
220 nF
Fig.30 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =63 V.
2001 Jun 22 47
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
296x12(full_width) CBA121
105
104
103
102
101
102
100
101
AC voltage
(V)
f (Hz)
MKT 370
330 nF
100 nF
47 nF
12 nF
22 nF
Fig.31 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =100 V.
296x12(full_width) CBA789
105
104
103
102
101
102
100
101
AC voltage
(V)
f (Hz)
MKT 370
12 nF
22 nF
47 nF
100 nF
330 nF
Fig.32 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =100 V.
2001 Jun 22 48
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
CBA122
296x12(full_width)
105
104
103
102
101
103
100
101
102
f (Hz)
AC Voltage
(V)
MKT 370
100 nF
22 nF
10 nF
4.7 nF
47 nF
Fig.33 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =250 V.
CBA790
296x12(full_width)
105
104
103
102
101
103
100
101
102
f (Hz)
AC Voltage
(V)
MKT 370
4.7 nF
10 nF
22 nF
47 nF
100 nF
Fig.34 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =250 V.
2001 Jun 22 49
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
CBA123
296x12(full_width)
105
104
103
102
101
103
100
101
102
f (Hz)
AC Voltage
(V)
MKT 370
33 nF
4.7 nF
1.0 nF
2.2 nF
10 nF
Fig.35 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =400 V.
CBA791
296x12(full_width)
105
104
103
102
101
103
100
101
102
f (Hz)
AC Voltage
(V)
MKT 370
1.0 nF
2.2 nF
4.7 nF
10 nF
33 nF
Fig.36 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =400 V.
2001 Jun 22 50
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
296x12(full_width)
AC voltage
(V)
f (Hz)
CBA124
105
104
103
102
101
102
100
101
MKT 371
100 nF
220 nF
470 nF
1000 nF
Fig.37 AC voltage (RMS value ) as a function of frequency at Tamb ≤85 °C for URdc =63 V.
296x12(full_width)
AC voltage
(V)
f (Hz)
CBA792
105
104
103
102
101
102
100
101
MKT 371
1000 nF
470 nF
220 nF
100 nF
Fig.38 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =63 V.
2001 Jun 22 51
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
296x12(full_width)
AC voltage
(V)
f (Hz)
CBA125
105
104
103
102
101
102
100
101
MKT 371
22 nF
47 nF
100 nF
220 nF
470 nF
Fig.39 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =100 V.
296x12(full_width)
AC voltage
(V)
f (Hz)
CBA793
105
104
103
102
101
102
100
101
MKT 371
22 nF
47 nF
100 nF
220 nF
470 nF
Fig.40 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =100 V.
2001 Jun 22 52
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
CBA126
296x12(full_width)
105
104
103
102
101
103
100
101
102
f (Hz)
AC Voltage
(V)
MKT 371
10 nF
22 nF
47 nF
100 nF
Fig.41 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =250 V.
CBA794
296x12(full_width)
f (Hz)
AC Voltage
(V)
105
104
103
102
101
103
100
101
102
MKT 371
10 nF
22 nF
47 nF
100 nF
Fig.42 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =250 V.
2001 Jun 22 53
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
CBA127
296x12(full_width)
10
10
10
10
f (Hz)
AC Voltage
(V)
105
104
103
102
101
3
0
1
2
MKT 371
4.7 nF
15 nF
Fig.43 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =400 V.
CBA795
10
10
10
10
f (Hz)
AC Voltage
(V)
296x12(full_width)
105
104
103
102
101
3
0
1
2
MKT 371
4.7 nF
10 nF
15 nF
Fig.44 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =400 V.
2001 Jun 22 54
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
296x12(full_width)
AC voltage
(V)
f (Hz)
CBA128
105
104
103
102
101
102
100
101
MKT 372
100 nF
220 nF
470 nF
Fig.45 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =100 V.
296x12(full_width)
AC voltage
(V)
f (Hz)
CBA796
105
104
103
102
101
102
100
101
MKT 372
220 nF
470 nF
100 nF
Fig.46 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =100 V.
2001 Jun 22 55
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
CBA129
296x12(full_width)
10
10
10
10
f (Hz)
AC Voltage
(V)
105
104
103
102
101
3
0
1
2
MKT 372
47 nF
150 nF
Fig.47 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =250 V.
CBA797
296x12(full_width)
f (Hz)
AC Voltage
(V)
105
104
103
102
101
103
100
101
102
MKT 372
47 nF
150 nF
Fig.48 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =250 V.
2001 Jun 22 56
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
CBA130
296x12(full_width)
f (Hz)
AC Voltage
(V)
105
104
103
102
101
103
100
101
102
MKT 372
4.7 nF
10 nF
22 nF
47 nF
Fig.49 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =400 V.
CBA798
296x12(full_width)
10
10
10
10
f (Hz)
AC Voltage
(V)
105
104
103
102
101
3
0
1
2
MKT 372
4.7 nF
10 nF
22 nF
47 nF
Fig.50 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =400 V.
2001 Jun 22 57
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
CBB300
296x12(full_width)
f (Hz)
AC Voltage
(V)
105
104
103
102
101
103
100
101
102
MKT 372
10 nF
22 nF
47 nF
Fig.51 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =630 V.
CBB301
296x12(full_width)
f (Hz)
AC Voltage
(V)
105
104
103
102
101
103
100
101
102
MKT 372
10 nF
22 nF
47 nF
Fig.52 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =630 V.
2001 Jun 22 58
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
296x12(full_width)
AC voltage
(V)
f (Hz)
CBA800
105
104
103
102
101
102
100
101
MKT 373
470 nF
2.2 µF
Fig.53 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =100 V
(2222 373 23...; 24...; 27...; 28... compact size types).
296x12(full_width)
AC voltage
(V)
f (Hz)
CBA801
105
104
103
102
101
102
100
101
MKT 373
2.2 µF
470 nF
Fig.54 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =100 V
(2222 373 23...; 24...; 27...; 28... compact size types).
2001 Jun 22 59
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
296x12(full_width) CBA803
AC Voltage
(V)
f (Hz) 105
104
103
102
101
103
100
101
102
MKT 373
2.2 µF
4.7 µF
470 nF
Fig.55 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =250 V
(2222 373 43...; 44...; 47...; 48... compact size types).
296x12(full_width) CBA804
AC Voltage
(V)
f (Hz) 105
104
103
102
101
103
100
101
102
MKT 373
2.2 µF
4.7 µF
470 nF
Fig.56 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =250 V
(2222 373 43...; 44...; 47...; 48... compact size types).
2001 Jun 22 60
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
CBA806
296x12(full_width)
105
104
103
102
101
103
100
101
102
f (Hz)
AC Voltage
(V)
MKT 373
100 nF
470 nF
1.5 µF
Fig.57 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =400 V
(2222 373 53...; 54...; 57...; 58... compact size types).
CBA807
296x12(full_width)
105
104
103
102
101
103
100
101
102
f (Hz)
AC Voltage
(V)
MKT 373
100 nF
470 nF
1.5 µF
Fig.58 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =400 V
(2222 373 53...; 54...; 57...; 58... compact size types).
2001 Jun 22 61
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
CBA808
296x12(full_width)
105
104
103
102
101
103
100
101
102
f (Hz)
AC Voltage
(V)
MKT 373
100 nF
220 nF
1.0 µF
Fig.59 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =630 V
(2222 373 63...; 64...; 67...; 68... compact size types).
CBA823
296x12(full_width)
105
104
103
102
101
103
100
101
102
f (Hz)
AC Voltage
(V)
MKT 373
100 nF
220 nF
1.0 µF
Fig.60 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =630 V
(2222 373 63...; 64...; 67...; 68... compact size types).
2001 Jun 22 62
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
296x12(full_width)
AC voltage
(V)
f (Hz)
CBA131
10
10
10
105
104
103
102
101
2
0
1
MKT 373
470 nF
4.7 µF
15 µF
Fig.61 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =100 V
(2222 373 21...; 22...; 25...; 26... sta ndard size types).
296x12(full_width)
AC voltage
(V)
f (Hz)
CBA799
105
104
103
102
101
102
100
101
MKT 373
470 nF
4.7 µF
15 µF
Fig.62 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =100 V
(2222 373 21...; 22...; 25...; 26... sta ndard size types).
2001 Jun 22 63
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
296x12(full_width) CBA132
AC Voltage
(V)
f (Hz) 105
104
103
102
101
103
100
101
102
MKT 373
470 nF
1.0 µF
4.7 µF
Fig.63 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =250 V
(2222 373 41...; 42...; 45...; 46... sta ndard size types).
296x12(full_width) CBA802
AC Voltage
(V)
f (Hz) 105
104
103
102
101
103
100
101
102
MKT 373
470 nF
1.0 µF
4.7 µF
Fig.64 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =250 V
(2222 373 41...; 42...; 45...; 46... sta ndard size types).
2001 Jun 22 64
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
Maximum RMS current (sinewave) as a function of frequency
The maximum RMS current is defined by .
Uac is the maximum AC voltage depending on the ambient temperature in Figs 29 to 66.
CBA133
296x12(full_width)
105
104
103
102
101
103
100
101
102
f (Hz)
AC Voltage
(V)
MKT 373
100 nF
470 nF
1.5 µF
Fig.65 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =400 V
(2222 373 51...; 52...; 55...; 56... sta ndard size types).
CBA805
296x12(full_width)
105
104
103
102
101
103
100
101
102
f (Hz)
AC Voltage
(V)
MKT 373
100 nF
470 nF
1.5 µF
Fig.66 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =400 V
(2222 373 51...; 52...; 55...; 56... sta ndard size types).
Iac ωCU
ac
××=
2001 Jun 22 65
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
Tangent of loss angle
Insulation resistance
296x12(full_width) CBA134
105
104
103
102
103
101
102
dissipation
factor
(x 10-4)
f (Hz)
1
2
3
4
5
C ≤ 0.33 µF (curve 1)
0.33 µF < C ≤ 1.2 µF (curve 2)
1.2 µF < C ≤ 3.9 µF (curve 3)
3.9 µF < C < 6.8 µF (curve 4)
C ≥ 6.8 µF (curve 5)
Fig.67 Tangent of loss angle as a function of frequency; typical curve.
CBA135
296x12(full_width)
RC
(s)
Tamb (°C) 100-50 0 50
105
102
104
103
Fig.68 RC product as a function of ambient free air temperature; typica l curve .
2001 Jun 22 66
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
Maximum allowed component temperature rise (∆T) as a function of the ambient temper ature (Tamb)
Heat conductivity (G) as a function of pitch and capacitor body thickness in mW/°C
Table 1 Heat conductivity
Power dissipation and maximum component tem perature rise
The power dissipation must be limited in order not to exceed the maximum al lowe d component temperature rise as a
function of the free air ambient temperature.
The power dissipation can be calculated accor ding chapter “Introduction”, section “Maximum power dissipation”.
The component temperat ure ri se (∆T) can be measure d (see section “Measuring the component temperature” for more
details) or calculated by :
•∆T=component temperature rise (°C).
•P = power dissipation of the component (mW).
•G=heat conductivity of the component (mW/°C).
bmax
(mm)
PITCH
(mm)
5 7.5 10 15 22.5 27.5
2.5 2.5 3 −−−−
3.0 −4−−−−
3.5 3.0 −−−−−
4.0 −56.0−−−
4.5 4.0 −−−−−
5.0 −67.510−−
6.0 5.5 7 9.0 11 19 −
7.0 −−−12 21 −
8.5 −−−16 25 −
10.0 −−−18 28 −
11.0 −−−−−36
13.0 −−−−−42
15.0 −−−−−48
18.0 −−−−−57
296x12(full_width)
0 20 40 60 80 100
Tamb (°C)
CBB191
-60 -40 -20
12
10
8
6
4
2
0
∆T
(°C) 14
16
Fig.69 Maximum allowed compone nt temper ature rise as a function of the ambient temperature.
∆TPG⁄=
2001 Jun 22 67
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
Measuring the component temperature
A thermocouple must be attached to the capacitor body as in Fig.70.
The temperature is measured in unloaded (Tamb) and maximum loaded condition
(Tc).
The temperature rise is given by .
To avoid radiation or convection, the capacitor should be tested in a wind-free
box.
144x12(halfpage) thermocouple
CBA758
Fig.70 Mounting the thermocouple.
∆TT
cTamb
–=
2001 Jun 22 68
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
Application note and limiting conditions
These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as
described hereunder. These mains applicati ons are strictly regulate d in safety standards and therefore electrom agne tic
interference suppression capacitors conforming the standards must be used.
To select the capacitor for a certain application, the following conditions must be che cked :
1. The peak voltage (Up) shall not be greater than the rated DC voltage (U Rdc).
2. The peak-to-peak vol tage (Up-p) shall not be greater than the maximum Up-p to avoid the ionisation inception level.
3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-ci rcui t at rated voltage an d
without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied
by URdc and divided by the applied voltage.
For all other pulses following equation must be fulfilled:
T is the pulse duration.
4. The maximum component surface temperature rise must be lower than the limits in Fig.69.
5. S inc e in circuits used at voltages o ver 280 V peak-to-peak t he risk for an intrinsic ally act i ve flam mabi lit y after a
capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to
100 times the val ues me ntioned in Table 1 “Heat conductivity”.
6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected
with an impedance to the mains the applicant must guarantee that following conditions are fulfilled in any case (spikes
and surge voltages from the mains included).
VOLTAGE CONDITIONS FOR 6 ABOVE
ALLOWED VOLTAG ES Tamb ≤85 °C85°C<Tamb ≤105 °C
Maximum continuous RMS voltage URac 0.8 ×URac
Maximum te mporary R MS -overvoltage (<24 hours) 1.25 ×URac 1.0 ×URac
Maximum peak voltage (Vo-p) (<2s) 1.6×URdc 1.3 ×URdc
2dU
dt
--------
2
0
T
∫dt×× URdc dU
dt
--------
rated
×<
2001 Jun 22 69
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
Example
C=3300 nF - 100 V used for the voltage signal shown in Fig.71.
Up-p =80 V; Up=70 V; T1=0.5 ms; T2=1ms.
The ambient temperature is 35 °C.
Checking the conditions:
1. The peak voltage Up=70 V is lower than 100 V (DC).
2. The peak-to-peak voltage 80 V is lower than .
3. The voltage pulse slope dU/dt =80 V/500 µs=0.16 V/µs.
This is lower than 8 V/µs (see specific reference data for each version).
4. The dissipated power is 60 mW as calculated with Fourier terms.
The temperature rise for bmax = 7.0 mm and pitch = 15 mm will be .
This is lower than 15 °C temperatur e rise at 35 °C; see Fig.69.
5. Not applicable.
6. Not applicable.
2263VAC
()×× 178 Upp–
=
60 mW
12 mW °C⁄
------------------------------- 5°C=
296x12(full_width)
Up
time
Up-p
voltage
CBA865
T1
T2
Fig.71 Voltage signal.
2001 Jun 22 70
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
MARKING
Product marking
CAPACITORS WITH PITCH =5.08 mm: STYLE 2222 370
The capacitors are marked on the side (see Fig.72) with the
following information:
1. C apa citanc e code in acc ordanc e with “IEC 60062”
2. To lerance on rated capacitanc e: K =±10%; J =±5%
3. Rated voltage (DC) (e.g. 63 V)
4. C ode for manufact urer
5. Yea r and week of manufacture (e.g. 0001)
6. Manufacturer’s type designation (e.g. 370).
144x12(halfpage)
FRONT FACE
CBB072
820n K
63V BC
0001 370
Fig.72 Example of marking for a capacitor with
pitch =5.08 mm.
CAPACITORS WITH PITCH =7.62mm: STYLE 2222 371
The capacitors are marked on the side (see Fig.73) with the
following information:
1. C apa citanc e code in acc ordanc e with “IEC 60062”
2. To lerance on rated capacitanc e: K =±10%; J =±5%
3. Rated voltage (DC) (e.g. 100 V)
4. C ode for manufact urer
5. Yea r and week of manufacture (e.g. 0001)
6. Manufacturer’s type designation (e.g. 371).
144x12(halfpage) FRONT FACE
CBB048
100n K
100V BC
0001 371
Fig.73 Example of marking for a capacitor
with pitch =7.62 mm.
CAPACITORS WITH PITCH =10 mm: STYLE 2222 372
The capacitors are marked on the side (see Fig.74) with the
following information:
1. Yea r and week of manufacture (e.g. 0001)
2. C apa citanc e code in acc ordanc e with “IEC 60062”
3. To lerance on rated capacitanc e: K =±10%; J =±5%;
4. Rated voltage (DC) (e.g. 100 V)
5. Code for dielectric material (MKT)
6. Manufacturer’s type designation (e.g. 372)
7. C ode for manufact urer.
8. C ode for factory of origin (HQ)
144x12(halfpage)
0001
100 n K 100V
MKT 372
BC-HQ
FRONT FACE
CBB049
Fig.74 Example of marking for a capacitor
with pitch =10 mm.
2001 Jun 22 71
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
CAPACITORS WITH PITCH =15 mm: STYLES 2222 373
The capacitors are marke d on the top (see Fig.75) with the
following information:
1. R ated ca paci ta nce code i n accorda n ce wit h
“IEC 60062”
2. To lerance on rated capacitanc e: K =±10%; J =±5%
3. Rated voltage (DC) (e.g. 100 V)
4. Manufacturer’s type designation (373)
5. Code for dielectric material (MKT);
and on the side with the following information:
1. Manufacturer
2. C ode for factory of origin (HQ)
3. Yea r and week of manufacture (e.g. 0001).
144x12(halfpage)
HEAD FACE FRONT FACE
470n K 100V
373 MKT BC
HQ0001
CBB050
Fig.75 Example of marking for a capacitor
with pitch =15.0 mm.
CAPACITORS WITH PITCH =22.5 AND 27.5 mm:
STYLES 2222 373
The capacitors are marke d on the top (see Fig.76) with the
following information:
1. R ated ca paci ta nce code i n accorda n ce wit h
“IEC 60062”
2. To lerance on rated capacitanc e: K =±10%; J =±5%
3. Rated voltage (DC) (e.g. 100 V)
4. Manufacturer
5. Manufacturer’s type designation (373)
6. Code for dielectric material (MKT)
7. C ode for factory of origin (HQ)
8. Yea r and week of manufacture (e.g. 0001).
144x12(halfpage) HEAD FACE
2µ2 K 100V BC
373 MKT HQ0001
CBB051
Fig.76 Example of marking for a capacitor
with pitch =22.5 and 27.5 mm.
2001 Jun 22 72
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
Package marking
The package containi ng the capa citors is marked as shown in Fig.77.
Fig.77 Barcode label.
Barcode label m arking
LINE MARKING EXPLANATION
1 Manufacturer’s name
2 Country of origin
3Sub-family
4 Type description
5 Capacitance value in µF, tolerance, voltage
and climatic category (“IEC 60068-1”)
6−
7 Preference origin code: A
Country of origin in code: 170 (Belgium)
Responsible production centre: HQ
WO: work order
Wage number of final inspection (only for
capacito rs with pitch =5, 7.5 and 10 mm)
8 Product type descript ion
9 Quantity and production period, year and
week code
10 Produ ct code (12NC)
2001 Jun 22 73
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
QUICK REFERENCE TEST REQUIREMENTS
TEST PROCEDURE
(quick reference) REQUIREMENTS
Robustness of leads
Tensile strength:
“IEC 60068-2-21”load 10 N; 10 s
no visible damage
legible marki ng
∆C/C≤2%
∆tan δ≤30 ×10−4; note 1
Bending:
“IEC 60068-2-21”load 5 N; 4 ×90 °
Resistance to soldering heat:
“IEC 60068-2-20”solder bath: 260 °C; 10 s
Component solvent resistance isopropyl alcohol; 23 °C; 5 minutes
Robustness of component
Vibration:
“IEC 60068-2-6”10 to 55 Hz; amplitude 0.75 mm or
acceleration 98 m/s2; 6 hours ∆C/C≤3%
∆tan δ≤30 ×10−4; note 1
Shock:
“IEC 60068-2-27”half sinewave; 490 m/s2; 11 ms
Climatic sequenc e
Dry heat:
“IEC 60068-2-2”16 hours; 105 °C
∆C/C≤3%
∆tan δ≤50 ×10−4; note 1
Rins ≥50% of specified value
Damp heat cyclic, test Db, first cycle:
“IEC 60068-2-30”
Cold:
“IEC 60068-2-1”2 hours; −55 °C
Damp heat , te st Db ,
remaining cycles:
“IEC 60068-2-30”
Other applicable tests
Damp heat, steady state:
“IEC 60068-2-3”56 days; 40 °C; 90 to 95% R H ∆C/C≤5%
∆tan δ≤50 ×10−4; note 1
Rins ≥50% of specified value
Endurance (DC):
“IEC 60384-2”2000 hours;
1.25 ×URdc; 85 °C
1×URdc; 105 °C
∆C/C≤5%
∆tan δ≤30 ×10−4; note 1
Rins ≥50% of specified value
Heat storage:
“IEC 60384-2”2000 hours; 105 °C∆C/C≤3%
∆tan δ≤30 ×10−4; note 1
Endurance (AC):
“IEC 60384-2”1000 hours: 1.1 ×URac; 85 °C∆C/C≤8% (style 370)
∆C/C≤5% (style 371)
∆C/C≤3% (style 372 and 373)
∆tan δ≤30 ×10−4; note 1
2001 Jun 22 74
BCcomponents Prod uct spec ification
Metalliz ed polyester film capacitors MKT 37 0/371/372/373
Note
1. Measuring frequenc y 10 kH z .
Resistance to detergent s 3 minutes in dishwater at 70 °C∆C/C≤1%
∆tan δ≤30 ×10−4; note 1
Rins ≥50% of specified value
Resistance to soldering heat
with pr eheating:
“IEC 60384-2”
body temperature: 100 °C;
bath temperature: 260 °C;
dwell time : 5 s
∆C/C≤2%
∆tan δ≤30 ×10−4; note 1
Pas s ive fl am mabi lity
“IEC 60384-1”Class C no burning
TEST PROCEDURE
(quick reference) REQUIREMENTS
