BCcomponents DATA SHEET MKT 370/371/372/373 Metallized polyester film capacitors Product specification Supersedes data of April 1999 File under BCcomponents, BC05 2001 Jun 22 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 MKT RADIAL POTTED TYPE PITCH 5/7.5/10/15/22.5/27.5 mm 296x12(full_width) 2222 370 P = 5 mm 2222 371 P = 7.5 mm 2222 373 2222 372 P = 10 mm P = 15/22.5/27.5 mm CBA111 Fig.1 Simplified outlines. FEATURES * Low-inductive wound cell of metallized (PETP) film QUICK REFERENCE DATA DESCRIPTION VALUE Capacitance range (E12 series) 0.001 to 15 F Capacitance tolerance 10%; 5% Rated (DC) voltage 63 V; 100 V; 250 V; 400 V; 630 V * Withstands solvents and rinsing liquids Rated (AC) voltage 40 V; 63 V; 160 V; 220 V; 250 V Climatic category 55/105/56 * Small stand-off pips to allow removal of solder flux Rated temperature 85 C Maximum application temperature 105 C * Suitable for high density packaging. Reference specification IEC 60384-2 * Potted with epoxy resin in a flame-retardant case * Radial leads of solder-coated wire APPLICATIONS Performance grade grade 1 (long life) Materials qualified in accordance with UL94 V-0 * Blocking and coupling * Bypass and energy reservoir. DETAIL SPECIFICATION For more detailed data and test requirements see "Type detail specification HQN-384-02/103". 2001 Jun 22 2 BCcomponents Product specification Metallized polyester film capacitors MKT 370 COMPOSITION OF CATALOGUE NUMBER TYPE AND PITCHES 370 MULTIPLIER (nF) 5.08 mm CAPACITANCE (numerically) 0.1 2 1 3 10 4 100 5 Example: 104 = 10 x 10 = 100 nF 2222 TYPE 370 PACKAGING 370 LEAD CONFIGURATION XX XX X PREFERRED TYPES C-TOL ammopack 63 V 100 V 250 V 400 V 10% 75 85 35 65 5% 76 86 36 66 ON REQUEST lead length 4.0 mm loose in box 370 lead length 26.0 mm taped on reel 2001 Jun 22 3 10% 11 21 41 51 5% 12 22 42 52 10% 15 25 45 55 5% 16 26 46 56 10% 18 28 48 58 5% 19 29 49 59 BCcomponents Product specification Metallized polyester film capacitors MKT 371/372/373 TYPE AND PITCHES 371 7.5 mm 372 10.0 mm 373 MULTIPLIER (nF) 15.0 mm CAPACITANCE 22.5 mm (numerically) 27.5 mm 0.1 2 1 3 10 4 100 5 Example: 104 = 10 x 10 = 100 nF 2222 TYPE PACKAGING loose in box 37. LEAD CONFIGURATION XX XX X PREFERRED TYPES C-TOL lead length 4.0 mm 371 ammopack 63 V 100 V 250 V 400 V 630 V 10% 11 21 41 51 - 5% 12 22 42 52 - 10% 38 68 78 88 - 5% 39 69 79 89 - 372 loose in box lead length 4.0 mm 10% - 21 41 51 61 373 loose in box lead length 5.0 mm 10% - 23 43 53 63 10% 15 25 45 55 - ON REQUEST loose in box lead length 26.0 mm 371 taped on reel loose in box 372 lead length 4.0 mm taped on reel ammopack loose in box 373 2001 Jun 22 lead length 5.0 mm taped on reel 4 5% 16 26 46 56 - 10% 35 65 75 85 - 5% 36 66 76 86 - 5% - 22 42 52 62 10% - 25 45 55 65 5% - 26 46 56 66 10% - 28 48 58 68 5% - 29 49 59 69 5% - 24 44 54 64 10% - 27 47 57 67 5% - 28 48 58 68 BCcomponents Product specification Metallized polyester film capacitors MKT 370 MKT 370 GENERAL DATA PITCH 5 mm b l 296x12(full_width) h lt Odt P CBA112 Fig.4 Outline. Specific reference data for the 63 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: C 0.1 F 0.1 F < C 0.47 F 0.47 F < C 1.5 F Rated voltage pulse slope (dU/dt)R at 63 V (DC) R between leads, for C 0.33 F at 10 V; 1 minute RC between leads, for: 0.33 F < C 1.0 F at 10 V; 1 minute C > 1.0 F at 10 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 1 kHz 75 x 10-4 75 x 10-4 75 x 10-4 at 10 kHz 130 x 10-4 130 x 10-4 130 x 10-4 60 V/s >15000 M at 100 kHz 250 x 10-4 300 x 10-4 - >5000 s >1000 s >30000 M 100 V; 1 minute 200 V; 1 minute Available 63 V DC versions PACKAGING Ammopack DIMENSIONS H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/-0.5 mm Loose in box lt = 26.0 2.0 mm Taped on reel 2001 Jun 22 H = 18.5 mm; P0 = 12.7 mm 5 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER 10% 5% 10% 5% 10% 5% 10% 5% 2222 370 75... 2222 370 76... 2222 370 11... 2222 370 12... 2222 370 15... 2222 370 16... 2222 370 18... 2222 370 19... ORDERING preferred preferred on request on request on request on request on request on request BCcomponents Product specification Metallized polyester film capacitors MKT 370 URdc = 63 V; URac = 40 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) AMMOPACK MASS (g) H = 18.5 mm; P0 = 12.7 mm C-tol = 10% C-tol = 5% catalogue number last 5 digits Pitch = 5.08 0.30 mm; dt = 0.50 0.05 mm 0.056 2222 370 75563 .. 76563 0.068 2222 370 75683 .. 76683 2222 370 75823 .. 76823 0.082 0.1 2.5 x 6.5 x 7.2 0.25 0.12 2222 370 75104 .. 76104 2222 370 75124 .. 76124 0.15 2222 370 75154 .. 76154 0.18 2222 370 75184 .. 76184 0.22 2222 370 75224 .. 76224 0.27 2222 370 75274 .. 76274 0.33 3.5 x 8.0 x 7.2 0.35 0.39 2222 370 75334 .. 76334 2222 370 75394 .. 76394 0.47 2222 370 75474 .. 76474 0.56 2222 370 75564 .. 76564 0.68 4.5 x 9.0 x 7.2 0.45 0.82 1 1.2(1) 6.0 x 11.0 x 7.2 0.60 1.5(1) 2222 370 75684 .. 76684 2222 370 75824 .. 76824 2222 370 75105 .. 76105 2222 370 75125 .. 76125 2222 370 75155 .. 76155 Note 1. For C = 1.2 F and C = 1.5 F: URdc = 50 V and URac = 32 V. 2001 Jun 22 6 BCcomponents Product specification Metallized polyester film capacitors MKT 370 MKT 370 GENERAL DATA PITCH 5 mm b l 296x12(full_width) h lt Odt P CBA112 Fig.5 Outline. Specific reference data for the 100 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz C 0.1 F 75 x 10-4 130 x 10-4 250 x 10-4 0.1 F < C 0.47 F 75 x 10-4 130 x 10-4 300 x 10-4 110 V/s Rated voltage pulse slope (dU/dt)R at 100 V (DC) R between leads, for C 0.33 F at 100 V; 1 minute >15000 M RC between leads, for C > 0.33 F at 100 V; 1 minute >5000 s R between interconnected leads and case (foil method) >30000 M Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 160 V; 1 minute Withstanding (DC) voltage between leads and case 200 V; 1 minute Available 100 V DC versions PACKAGING Ammopack DIMENSIONS H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/-0.5 mm Loose in box lt = 26.0 2.0 mm Taped on reel 2001 Jun 22 H = 18.5 mm; P0 = 12.7 mm 7 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 370 85... preferred 5% 2222 370 86... preferred 10% 2222 370 21... on request 5% 2222 370 22... on request 10% 2222 370 25... on request 5% 2222 370 26... on request 10% 2222 370 28... on request 5% 2222 370 29... on request BCcomponents Product specification Metallized polyester film capacitors MKT 370 URdc = 100 V; URac = 63 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) AMMOPACK MASS (g) H = 18.5 mm; P0 = 12.7 mm C-tol = 10% C-tol = 5% catalogue number last 5 digits Pitch = 5.08 0.30 mm; dt = 0.50 0.05 mm 0.012 2222 370 85123 .. 86123 0.015 2222 370 85153 .. 86153 .. 86183 0.018 2222 370 85183 0.022 2222 370 85223 .. 86223 0.027 2222 370 85273 .. 86273 0.033 2.5 x 6.5 x 7.2 0.25 0.039 2222 370 85333 .. 86333 2222 370 85393 .. 86393 0.047 2222 370 85473 .. 86473 0.056 2222 370 85563 .. 86563 0.068 2222 370 85683 .. 86683 0.082 2222 370 85823 .. 86823 0.10 2222 370 85104 .. 86104 0.12 2222 370 85124 .. 86124 0.15 3.5 x 8.0 x 7.2 0.35 0.18 0.22 0.27 4.5 x 9.0 x 7.2 0.45 2222 370 85154 .. 86154 2222 370 85184 .. 86184 2222 370 85224 .. 86224 2222 370 85274 .. 86274 0.33 2222 370 85334 .. 86334 0.39 2222 370 85394 .. 86394 2222 370 85474 .. 86474 0.47 2001 Jun 22 6.0 x 11.0 x 7.2 0.65 8 BCcomponents Product specification Metallized polyester film capacitors MKT 370 MKT 370 GENERAL DATA PITCH 5 mm b l 296x12(full_width) h lt Odt P CBA112 Fig.6 Outline. Specific reference data for the 250 V DC capacitors DESCRIPTION VALUE Tangent of loss angle at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 130 x 10-4 250 x 10-4 330 V/s Rated voltage pulse slope (dU/dt)R at 250 V (DC) >30000 M R between leads at 100 V; 1 minute >30000 M R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 400 V; 1 minute Withstanding (DC) voltage between leads and case 500 V; 1 minute Available 250 V DC versions PACKAGING Ammopack DIMENSIONS H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/-0.5 mm Loose in box lt = 26.0 2.0 mm Taped on reel 2001 Jun 22 H = 18.5 mm; P0 = 12.7 mm 9 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 370 35... preferred 5% 2222 370 36... preferred 10% 2222 370 41... on request 5% 2222 370 42... on request 10% 2222 370 45... on request 5% 2222 370 46... on request 10% 2222 370 48... on request 5% 2222 370 49... on request BCcomponents Product specification Metallized polyester film capacitors MKT 370 URdc = 250 V; URac = 160 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) AMMOPACK MASS (g) H = 18.5 mm; P0 = 12.7 mm C-tol = 10% C-tol = 5% catalogue number last 5 digits Pitch = 5.08 0.30 mm; dt = 0.50 0.05 mm 0.0039 2222 370 35392 .. 36392 0.0047 2222 370 35472 .. 36472 0.0056 2222 370 35562 .. 36562 0.0068 2222 370 35682 .. 36682 2222 370 35822 .. 36822 0.0082 2.5 x 6.5 x 7.2 0.25 0.01 2222 370 35103 .. 36103 0.012 2222 370 35123 .. 36123 0.015 2222 370 35153 .. 36153 0.018 2222 370 35183 .. 36183 0.022 0.027 3.5 x 8.0 x 7.2 0.35 2222 370 35223 .. 36223 2222 370 35273 .. 36273 0.033 2222 370 35333 .. 36333 0.039 2222 370 35393 .. 36393 0.047 4.5 x 9.0 x 7.2 0.45 0.056 0.068 0.082 6.0 x 11.0 x 7.2 0.60 0.1 2001 Jun 22 10 2222 370 35473 .. 36473 2222 370 35563 .. 36563 2222 370 35683 .. 36683 2222 370 35823 .. 36823 2222 370 35104 .. 36104 BCcomponents Product specification Metallized polyester film capacitors MKT 370 MKT 370 GENERAL DATA PITCH 5 mm b l 296x12(full_width) h lt Odt P CBA112 Fig.7 Outline. Specific reference data for the 400 V DC capacitors DESCRIPTION VALUE Tangent of loss angle at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 130 x 10-4 250 x 10-4 630 V/s Rated voltage pulse slope (dU/dt)R at 400 V (DC) >30000 M R between leads at 100 V; 1 minute >30000 M R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 640 V; 1 minute Withstanding (DC) voltage between leads and case 800 V; 1 minute Available 400 V DC versions PACKAGING Ammopack DIMENSIONS H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/-0.5 mm Loose in box lt = 26.0 2.0 mm Taped on reel 2001 Jun 22 H = 18.5 mm; P0 = 12.7 mm 11 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 370 65... preferred 5% 2222 370 66... preferred 10% 2222 370 51... on request 5% 2222 370 52... on request 10% 2222 370 55... on request 5% 2222 370 56... on request 10% 2222 370 58... on request 5% 2222 370 59... on request BCcomponents Product specification Metallized polyester film capacitors MKT 370 URdc = 400 V; URac = 220 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) AMMOPACK MASS (g) H = 18.5 mm; P0 = 12.7 mm C-tol = 10% C-tol = 5% catalogue number last 5 digits Pitch = 5.08 0.30 mm; dt = 0.50 0.05 mm 0.001 2222 370 65102 .. 66102 0.0012 2222 370 65122 .. 66122 0.0015 2222 370 65152 .. 66152 0.0018 2222 370 65182 .. 66182 0.0022 2222 370 65222 .. 66222 2222 370 65272 .. 66272 0.0027 0.0033 2.5 x 6.5 x 7.2 0.25 0.0039 2222 370 65332 .. 66332 2222 370 65392 .. 66392 0.0047 2222 370 65472 .. 66472 0.0056 2222 370 65562 .. 66562 0.0068 2222 370 65682 .. 66682 0.0082 2222 370 65822 .. 66822 0.01 2222 370 65103 .. 66103 2222 370 65123 .. 66123 0.012 3.5 x 8.0 x 7.2 0.35 0.015 2222 370 65153 .. 66153 0.018 2222 370 65183 .. 66183 0.022 4.5 x 9.0 x 7.2 0.45 0.027 0.033 0.039 6.0 x 11.0 x 7.2 0.60 0.047 2001 Jun 22 12 2222 370 65223 .. 66223 2222 370 65273 .. 66273 2222 370 65333 .. 66333 2222 370 65393 .. 66393 2222 370 65473 .. 66473 BCcomponents Product specification Metallized polyester film capacitors MKT 371 MKT 371 GENERAL DATA PITCH 7.5 mm 296x12(full_width) b l h lt P Odt CBA113 Fig.8 Outline. Specific reference data for the 63 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: C 0.1 F 0.1 F < C 0.47 F 0.47 F < C 1.0 F Rated voltage pulse slope (dU/dt)R at 63 V (DC) R between leads, for C 0.33 F at 10 V; 1 minute RC between leads, for C > 0.33 F at 10 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 1 kHz 75 x 10-4 75 x 10-4 75 x 10-4 at 10 kHz 130 x 10-4 130 x 10-4 130 x 10-4 18 V/s >15000 M >5000 s >30000 M 100 V; 1 minute 200 V; 1 minute at 100 kHz 250 x 10-4 300 x 10-4 - Available 63 V DC versions PACKAGING DIMENSIONS Loose in box lt = 4.0 +1.0/-0.5 mm Ammopack H = 18.5 mm; P0 = 12.7 mm Loose in box lt = 26.0 2.0 mm Taped on reel H = 18.5 mm; P0 = 12.7 mm 2001 Jun 22 13 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 5% 10% 5% 10% 5% 10% 5% 2222 371 11... 2222 371 12... 2222 371 38... 2222 371 39... 2222 371 15... 2222 371 16... 2222 371 35... 2222 371 36... preferred preferred preferred preferred on request on request on request on request BCcomponents Product specification Metallized polyester film capacitors MKT 371 URdc = 63 V; URac = 40 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) MASS (g) LOOSE IN BOX AMMOPACK lt = 4.0 +1.0/-0.5 mm H = 18.5 mm; P0 = 12.7 mm C-tol = 10% C-tol = 5% catalogue number last 5 digits C-tol = 10% C-tol = 5% last 5 digits Pitch = 7.62 +0.30/-0.40 mm; dt = 0.50 0.05 mm 0.056 2222 371 11563 .. 12563 .. 38563 .. 39563 0.068 2222 371 11683 .. 12683 .. 38683 .. 39683 0.082 2.5 x 6.5 x 10.0 0.3 2222 371 11823 .. 12823 .. 38823 .. 39823 0.1 2222 371 11104 .. 12104 .. 38104 .. 39104 0.12 2222 371 11124 .. 12124 .. 38124 .. 39124 2222 371 11154 .. 12154 .. 38154 .. 39154 2222 371 11184 .. 12184 .. 38184 .. 39184 0.22 2222 371 11224 .. 12224 .. 38224 .. 39224 0.27 2222 371 11274 .. 12274 .. 38274 .. 39274 0.33 2222 371 11334 .. 12334 .. 38334 .. 39334 0.15 0.18 0.39 3.0 x 8.0 x 10.0 0.4 2222 371 11394 .. 12394 .. 38394 .. 39394 2222 371 11474 .. 12474 .. 38474 .. 39474 2222 371 11564 .. 12564 .. 38564 .. 39564 0.68 2222 371 11684 .. 12684 .. 38684 .. 39684 0.82 2222 371 11824 .. 12824 .. 38824 .. 39824 2222 371 11105 .. 12105 .. 38105 .. 39105 0.47 4.0 x 9.0 x 10.0 0.5 0.56 1.0 2001 Jun 22 5.0 x 10.5 x 10.0 0.7 14 BCcomponents Product specification Metallized polyester film capacitors MKT 371 MKT 371 GENERAL DATA PITCH 7.5 mm 296x12(full_width) b l h lt P Odt CBA113 Fig.9 Outline. Specific reference data for the 100 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz C 0.1 F 75 x 10-4 130 x 10-4 250 x 10-4 0.1 F < C 0.47 F 75 x 10-4 130 x 10-4 300 x 10-4 36 V/s Rated voltage pulse slope (dU/dt)R at 100 V (DC) R between leads, for C 0.33 F at 100 V; 1 minute >15000 M RC between leads, for C > 0.33 F at 100 V; 1 minute >5000 s R between interconnected leads and case (foil method) >30000 M Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 160 V; 1 minute Withstanding (DC) voltage between leads and case 200 V; 1 minute Available 100 V DC versions PACKAGING Loose in box Ammopack Loose in box Taped on reel 2001 Jun 22 DIMENSIONS lt = 4.0 +1.0/-0.5 mm H = 18.5 mm; P0 = 12.7 mm lt = 26.0 2.0 mm H = 18.5 mm; P0 = 12.7 mm 15 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 371 21... preferred 5% 2222 371 22... preferred 10% 2222 371 68... preferred 5% 2222 371 69... preferred 10% 2222 371 25... on request 5% 2222 371 26... on request 10% 2222 371 65... on request 5% 2222 371 66... on request BCcomponents Product specification Metallized polyester film capacitors MKT 371 URdc = 100 V; URac = 63 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) MASS (g) LOOSE IN BOX AMMOPACK lt = 4.0 +1.0/-0.5 mm H = 18.5 mm; P0 = 12.7 mm C-tol = 10% C-tol = 5% catalogue number last 5 digits C-tol = 10% C-tol = 5% last 5 digits Pitch = 7.62 +0.30/-0.40 mm; dt = 0.50 0.05 mm 0.018 2222 371 21183 .. 22183 .. 68183 .. 69183 0.022 2222 371 21223 .. 22223 .. 68223 .. 69223 0.027 0.033 2.5 x 6.5 x 10.0 0.3 0.039 2222 371 21273 .. 22273 .. 68273 .. 69273 2222 371 21333 .. 22333 .. 68333 .. 69333 2222 371 21393 .. 22393 .. 68393 .. 69393 .. 69473 0.047 2222 371 21473 .. 22473 .. 68473 0.056 2222 371 21563 .. 22563 .. 68563 .. 69563 0.068 2222 371 21683 .. 22683 .. 68683 .. 69683 0.082 3.0 x 8.0 x 10.0 0.4 2222 371 21823 .. 22823 .. 68823 .. 69823 0.1 2222 371 21104 .. 22104 .. 68104 .. 69104 0.12 2222 371 21124 .. 22124 .. 68124 .. 69124 0.15 2222 371 21154 .. 22154 .. 68154 .. 69154 2222 371 21184 .. 22184 .. 68184 .. 69184 .. 69224 0.18 4.0 x 9.0 x 10.0 0.5 0.22 2222 371 21224 .. 22224 .. 68224 0.27 2222 371 21274 .. 22274 .. 68274 .. 69274 0.33 2222 371 21334 .. 22334 .. 68334 .. 69334 0.39 0.47 2001 Jun 22 5.0 x 10.5 x 10.0 0.7 2222 371 21394 .. 22394 .. 68394 .. 69394 2222 371 21474 .. 22474 .. 68474 .. 69474 16 BCcomponents Product specification Metallized polyester film capacitors MKT 371 MKT 371 GENERAL DATA PITCH 7.5 mm 296x12(full_width) b l h lt P Odt CBA113 Fig.10 Outline. Specific reference data for the 250 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz C 0.1 F 75 x 10-4 130 x 10-4 250 x 10-4 0.1 F < C 0.12 F 75 x 10-4 130 x 10-4 300 x 10-4 70 V/s Rated voltage pulse slope (dU/dt)R at 250 V (DC) >30000 M R between leads at 100 V; 1 minute >30000 M R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 400 V; 1 minute Withstanding (DC) voltage between leads and case 500 V; 1 minute Available 250 V DC versions PACKAGING DIMENSIONS Loose in box lt = 4.0 +1.0/-0.5 mm Ammopack H = 18.5 mm; P0 = 12.7 mm Loose in box Taped on reel 2001 Jun 22 lt = 26.0 2.0 mm H = 18.5 mm; P0 = 12.7 mm 17 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 371 41... preferred 5% 2222 371 42... preferred 10% 2222 371 78... preferred 5% 2222 371 79... preferred 10% 2222 371 45... on request 5% 2222 371 46... on request 10% 2222 371 75... on request 5% 2222 371 76... on request BCcomponents Product specification Metallized polyester film capacitors MKT 371 URdc = 250 V; URac = 160 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) MASS (g) LOOSE IN BOX AMMOPACK lt = 4.0 +1.0/-0.5 mm H = 18.5 mm; P0 = 12.7 mm C-tol = 10% C-tol = 5% catalogue number last 5 digits C-tol = 10% C-tol = 5% last 5 digits Pitch = 7.62 +0.30/-0.40 mm; dt = 0.50 0.05 mm 0.0082 2222 371 41822 .. 42822 .. 78822 .. 79822 0.01 2222 371 41103 .. 42103 .. 78103 .. 79103 0.012 2.5 x 6.5 x 10.0 0.3 2222 371 41123 .. 42123 .. 78123 .. 79123 0.015 2222 371 41153 .. 42153 .. 78153 .. 79153 0.018 2222 371 41183 .. 42183 .. 78183 .. 79183 0.022 2222 371 41223 .. 42223 .. 78223 .. 79223 0.027 2222 371 41273 .. 42273 .. 78273 .. 79273 2222 371 41333 .. 42333 .. 78333 .. 79333 0.033 3.0 x 8.0 x 10.0 0.4 0.039 2222 371 41393 .. 42393 .. 78393 .. 79393 0.047 2222 371 41473 .. 42473 .. 78473 .. 79473 0.056 2222 371 41563 .. 42563 .. 78563 .. 79563 0.068 2222 371 41683 .. 42683 .. 78683 .. 79683 2222 371 41823 .. 42823 .. 78823 .. 79823 2222 371 41104 .. 42104 .. 78104 .. 79104 2222 371 41124 .. 42124 .. 78124 .. 79124 0.082 4.0 x 9.0 x 10.0 0.5 5.0 x 10.5 x 10.0 0.7 0.1 0.12 2001 Jun 22 18 BCcomponents Product specification Metallized polyester film capacitors MKT 371 MKT 371 GENERAL DATA PITCH 7.5 mm 296x12(full_width) b l h lt P Odt CBA113 Fig.11 Outline. Specific reference data for the 400 V DC capacitors DESCRIPTION VALUE Tangent of loss angle at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 130 x 10-4 250 x 10-4 190 V/s Rated voltage pulse slope (dU/dt)R at 400 V (DC) >30000 M R between leads at 100 V; 1 minute >30000 M R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 640 V; 1 minute Withstanding (DC) voltage between leads and case 800 V; 1 minute Available 400 V DC versions PACKAGING Loose in box Ammopack Loose in box Taped on reel 2001 Jun 22 DIMENSIONS lt = 4.0 +1.0/-0.5 mm H = 18.5 mm; P0 = 12.7 mm lt = 26.0 2.0 mm H = 18.5 mm; P0 = 12.7 mm 19 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 371 51... preferred 5% 2222 371 52... preferred 10% 2222 371 88... preferred 5% 2222 371 89... preferred 10% 2222 371 55... on request 5% 2222 371 56... on request 10% 2222 371 85... on request 5% 2222 371 86... on request BCcomponents Product specification Metallized polyester film capacitors MKT 371 URdc = 400 V; URac = 220 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) MASS (g) LOOSE IN BOX AMMOPACK lt = 4.0 +1.0/-0.5 mm H = 18.5 mm; P0 = 12.7 mm C-tol = 10% C-tol = 5% catalogue number last 5 digits C-tol = 10% C-tol = 5% last 5 digits Pitch = 7.62 +0.30/-0.40 mm; dt = 0.50 0.05 mm 0.0039 2222 371 51392 .. 52392 .. 88392 .. 89392 0.0047 2222 371 51472 .. 52472 .. 88472 .. 89472 0.0056 2.5 x 6.5 x 10.0 0.3 0.0068 0.0082 3.0 x 8.0 x 10.0 0.4 2222 371 51562 .. 52562 .. 88562 .. 89562 2222 371 51682 .. 52682 .. 88682 .. 89682 2222 371 51822 .. 52822 .. 88822 .. 89822 .. 89103 2222 371 51103 .. 52103 .. 88103 2222 371 51123 .. 52123 .. 88123 .. 89123 2222 371 51153 .. 52153 .. 88153 .. 89153 0.018 2222 371 51183 .. 52183 .. 88183 .. 89183 0.022 2222 371 51223 .. 52223 .. 88223 .. 89223 0.01 0.012 0.015 0.027 4.0 x 9.0 x 10.0 5.0 x 10.5 x 10.0 0.5 0.7 2222 371 51273 .. 52273 .. 88273 .. 89273 0.033 2222 371 51333 .. 52333 .. 88333 .. 89333 0.039 2222 371 51393 .. 52393 .. 88393 .. 89393 2001 Jun 22 20 BCcomponents Product specification Metallized polyester film capacitors MKT 372 MKT 372 GENERAL DATA PITCH 10 mm b l 296x12(full_width) h lt P Odt CBA114 Fig.12 Outline. Specific reference data for the 100 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz C 0.1 F 75 x 10-4 130 x 10-4 250 x 10-4 0.1 F < C 0.68 F 75 x 10-4 130 x 10-4 300 x 10-4 34 V/s Rated voltage pulse slope (dU/dt)R at 100 V (DC) R between leads, for C 0.33 F at 100 V; 1 minute >15000 M RC between leads, for C > 0.33 F at 100 V; 1 minute >5000 s R between interconnected leads and case (foil method) >30000 M Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 160 V; 1 minute Withstanding (DC) voltage between leads and case 200 V; 1 minute Available 100 V DC versions PACKAGING Loose in box DIMENSIONS lt = 4.0 +1.0/-0.5 mm Taped on reel H = 18.5 mm; P0 = 12.7 mm Ammopack H = 18.5 mm; P0 = 12.7 mm 2001 Jun 22 21 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 372 21... preferred 5% 2222 372 22... on request 10% 2222 372 25... on request 5% 2222 372 26... on request 10% 2222 372 28... on request 5% 2222 372 29... on request BCcomponents Product specification Metallized polyester film capacitors MKT 372 URdc = 100V; URac = 63 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.1 2222 372 21104 0.12 2222 372 21124 2222 372 21154 0.15 0.18 4.0 x 10.0 x 12.5 0.7 2222 372 21184 0.22 2222 372 21224 0.27 2222 372 21274 0.33 2222 372 21334 0.39 2222 372 21394 0.47 0.56 0.68 2001 Jun 22 5.0 x 11.0 x 12.5 6.0 x 12.0 x 12.5 0.9 2222 372 21474 2222 372 21564 1.0 2222 372 21684 22 BCcomponents Product specification Metallized polyester film capacitors MKT 372 MKT 372 GENERAL DATA PITCH 10 mm b l 296x12(full_width) h lt P Odt CBA114 Fig.13 Outline. Specific reference data for the 250 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz C 0.1 F 75 x 10-4 130 x 10-4 250 x 10-4 0.1 F < C 0.22 F 75 x 10-4 130 x 10-4 300 x 10-4 50 V/s Rated voltage pulse slope (dU/dt)R at 250 V (DC) >30000 M R between leads at 100 V; 1 minute >30000 M R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 400 V; 1 minute Withstanding (DC) voltage between leads and case 500 V; 1 minute Available 250 V DC versions PACKAGING DIMENSIONS Loose in box lt = 4.0 +1.0/-0.5 mm Taped on reel H = 18.5 mm; P0 = 12.7 mm Ammopack H = 18.5 mm; P0 = 12.7 mm 2001 Jun 22 C-tol 23 FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 372 41... preferred 5% 2222 372 42... on request 10% 2222 372 45... on request 5% 2222 372 46... on request 10% 2222 372 48... on request 5% 2222 372 49... on request BCcomponents Product specification Metallized polyester film capacitors MKT 372 URdc = 250 V; URac = 160 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.047 2222 372 41473 0.056 2222 372 41563 0.068 4.0 x 10.0 x 12.5 0.7 2222 372 41683 0.082 2222 372 41823 0.1 2222 372 41104 0.12 2222 372 41124 0.15 0.18 0.22 2001 Jun 22 5.0 x 11.0 x 12.5 6.0 x 12.0 x 12.5 0.9 2222 372 41154 2222 372 41184 1.0 2222 372 41224 24 BCcomponents Product specification Metallized polyester film capacitors MKT 372 MKT 372 GENERAL DATA PITCH 10 mm b l 296x12(full_width) h lt P Odt CBA114 Fig.14 Outline. Specific reference data for the 400 V DC capacitors DESCRIPTION VALUE Tangent of loss angle at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 130 x 10-4 250 x 10-4 80 V/s Rated voltage pulse slope (dU/dt)R at 400 V (DC) >30000 M R between leads at 100 V; 1 minute >30000 M R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 640 V; 1 minute Withstanding (DC) voltage between leads and case 800 V; 1 minute Available 400 V DC versions PACKAGING DIMENSIONS Loose in box lt = 4.0 +1.0/-0.5 mm Taped on reel H = 18.5 mm; P0 = 12.7 mm Ammopack 2001 Jun 22 C-tol H = 18.5 mm; P0 = 12.7 mm 25 FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 372 51... preferred 5% 2222 372 52... on request 10% 2222 372 55... on request 5% 2222 372 56... on request 10% 2222 372 58... on request 5% 2222 372 59... on request BCcomponents Product specification Metallized polyester film capacitors MKT 372 URdc = 400 V; URac = 220 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.0047 2222 372 51472 0.0056 2222 372 51562 0.0068 2222 372 51682 0.0082 2222 372 51822 2222 372 51103 0.01 0.012 4.0 x 10.0 x 12.5 0.7 2222 372 51123 0.015 2222 372 51153 0.018 2222 372 51183 0.022 2222 372 51223 0.027 2222 372 51273 0.033 2222 372 51333 0.039 2222 372 51393 0.047 5.0 x 11.0 x 12.5 0.9 2222 372 51473 0.056 2222 372 51563 0.068 2222 372 51683 0.082 2001 Jun 22 6.0 x 12.0 x 12.5 1.0 2222 372 51823 26 BCcomponents Product specification Metallized polyester film capacitors MKT 372 MKT 372 GENERAL DATA PITCH 10 mm b l 296x12(full_width) h lt P Odt CBA114 Fig.15 Outline. Specific reference data for the 630 V DC capacitors DESCRIPTION VALUE Tangent of loss angle at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 130 x 10-4 250 x 10-4 120 V/s Rated voltage pulse slope (dU/dt)R at 400 (DC) >30000 M R between leads at 500 V; 1 minute >30000 M R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1008 V; 1 minute Withstanding (DC) voltage between leads and case 1260 V; 1 minute Available 630 V DC versions PACKAGING DIMENSIONS Loose in box lt = 4.0 +1.0/-0.5 mm Taped on reel H = 18.5 mm; P0 = 12.7 mm Ammopack 2001 Jun 22 C-tol H = 18.5 mm; P0 = 12.7 mm 27 FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 372 61... preferred 5% 2222 372 62... on request 10% 2222 372 65... on request 5% 2222 372 66... on request 10% 2222 372 68... on request 5% 2222 372 69... on request BCcomponents Product specification Metallized polyester film capacitors MKT 372 URdc = 630 V; URac = 250 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.01 2222 372 61103 0.012 2222 372 61123 0.015 4.0 x 10.0 x 12.5 0.6 2222 372 61153 0.018 2222 372 61183 0.022 2222 372 61223 0.027 2222 372 61273 0.033 0.039 0.047 2001 Jun 22 5.0 x 11.0 x 12.5 6.0 x 12.0 x 12.5 0.9 2222 372 61333 2222 372 61393 1.0 2222 372 61473 28 BCcomponents Product specification Metallized polyester film capacitors MKT 373 MKT 373 GENERAL DATA PITCH 15 mm (COMPACT SIZE) b l 296x12(full_width) h lt Odt P CBA115 Fig.16 Outline. Specific reference data for the 100 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: 0.33 F < C 0.47 F 0.47 F < C 1.0 F 1.0 F < C 2.2 F Rated voltage pulse slope (dU/dt)R at 100 V (DC): R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 1 kHz 75 x 10-4 75 x 10-4 75 x 10-4 at 10 kHz 130 x 10-4 130 x 10-4 150 x 10-4 14 V/s >15000 M >5000 s >30000 M 160 V; 1 minute 200 V; 1 minute at 100 kHz 300 x 10-4 - - Available 100 V DC versions PACKAGING DIMENSIONS Loose in box lt = 5.0 1.0 mm Taped on reel H = 18.5 mm; P0 = 12.7 mm 2001 Jun 22 29 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 5% 10% 5% 2222 373 23... 2222 373 24... 2222 373 27... 2222 373 28... preferred on request on request on request BCcomponents Product specification Metallized polyester film capacitors MKT 373 URdc = 100 V; URac = 63 V (COMPACT SIZE) CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 10% Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.33 2222 373 23334 0.39 2222 373 23394 0.47 2222 373 23474 0.56 2222 373 23564 0.68 0.82 5.0 x 11.0 x 17.5 2222 373 23684 1.1 2222 373 23824 1 2222 373 23105 1.2 2222 373 23125 1.5 2222 373 23155 1.8 2222 373 23185 2.2 2001 Jun 22 6.0 x 12.0 x 17.5 1.4 2222 373 23225 30 BCcomponents Product specification Metallized polyester film capacitors MKT 373 GENERAL DATA MKT 373 PITCH 15/22.5/27.5 mm (COMPACT SIZE) b l 296x12(full_width) h lt Odt P CBA115 Fig.17 Outline. Specific reference data for the 250 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz 0.15 F < C 0.47 F 75 x 10-4 130 x 10-4 300 x 10-4 0.47 F < C 1.0 F 75 x 10-4 130 x 10-4 - 10-4 150 x 10-4 - 1.0 F < C 4.7 F 75 x Rated voltage pulse slope (dU/dt)R at 250 V (DC): P = 15 mm 16 V/s P = 22.5 mm 7 V/s P = 27.5 mm 6 V/s R between leads, for C 0.33 F at 100 V; 1 minute >30000 M RC between leads, for C > 0.33 F at 100 V; 1 minute >10000 s >30000 M R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 400 V; 1 minute Withstanding (DC) voltage between leads and case 500 V; 1 minute Available 250 V DC versions PACKAGING(1) DIMENSIONS Loose in box lt = 5.0 1.0 mm Taped on reel H = 18.5 mm; P0 = 12.7 mm C-tol Note 1. Taped on reel pitch = 27.5 mm is not available. 2001 Jun 22 31 FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 373 43... preferred 5% 2222 373 44... on request 10% 2222 373 47... on request 5% 2222 373 48... on request BCcomponents Product specification Metallized polyester film capacitors MKT 373 URdc = 250 V; URac = 160 V (COMPACT SIZE) CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 10% Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.15 2222 373 43154 0.18 2222 373 43184 0.22 5.0 x 11.0 x 17.5 1.1 2222 373 43224 0.27 2222 373 43274 0.33 2222 373 43334 0.39 2222 373 43394 0.47 0.56 0.68 0.82 1.0 1.2 6.0 x 12.0 x 17.5 7.0 x 13.5 x 17.5 1.4 2222 373 43474 2222 373 43564 1.9 8.5 x 15.0 x 17.5 2.6 10.0 x 16.5 x 17.5 3.1 2222 373 43684 2222 373 43824 2222 373 43105 2222 373 43125 Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 1.5 1.8 2.2 2.7 8.5 x 18.0 x 26.0 4.4 10.0 x 19.5 x 26.0 5.5 2222 373 43155 2222 373 43185 2222 373 43225 2222 373 43275 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 3.3 3.9 4.7 2001 Jun 22 11.0 x 21.0 x 31.0 13.0 x 23.0 x 31.0 7.8 2222 373 43335 2222 373 43395 10.4 2222 373 43475 32 BCcomponents Product specification Metallized polyester film capacitors MKT 373 GENERAL DATA MKT 373 PITCH 15/22.5/27.5 mm (COMPACT SIZE) b l 296x12(full_width) h lt Odt P CBA115 Fig.18 Outline. Specific reference data for the 400 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: C 0.1 F 0.1 F < C 0.47 F 0.47 F < C 1.0 F 1.0 F < C 1.5 F Rated voltage pulse slope (dU/dt)R at 400 V (DC): P = 15 mm P = 22.5 mm P = 27.5 mm R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 1 kHz 75 x 10-4 75 x 10-4 75 x 10-4 75 x 10-4 at 10 kHz 130 x 10-4 130 x 10-4 130 x 10-4 150 x 10-4 at 100 kHz 250 x 10-4 300 x 10-4 - - 34 V/s 14 V/s 12 V/s >30000 M >10000 s >30000 M 640 V; 1 minute 800 V; 1 minute Available 400 V DC versions PACKAGING(1) DIMENSIONS Loose in box lt = 5.0 1.0 mm Taped on reel H = 18.5 mm; P0 = 12.7 mm Note 1. Taped on reel pitch = 27.5 mm is not available. 2001 Jun 22 33 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 5% 10% 5% 2222 373 53... 2222 373 54... 2222 373 57... 2222 373 58... preferred on request on request on request BCcomponents Product specification Metallized polyester film capacitors MKT 373 URdc = 400 V; URac = 220 V (COMPACT SIZE) CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 10% Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.047 2222 373 53473 0.056 2222 373 53563 2222 373 53683 0.068 0.082 5.0 x 11.0 x 17.5 1.1 2222 373 53823 0.1 2222 373 53104 0.12 2222 373 53124 0.15 2222 373 53154 0.18 2222 373 53184 0.22 0.27 0.33 0.39 0.47 0.56 6.0 x 12.0 x 17.5 7.0 x 13.5 x 17.5 1.4 2222 373 53224 2222 373 53274 1.9 8.5 x 15.0 x 17.5 2.6 10.0 x 16.5 x 17.5 3.2 2222 373 53334 2222 373 53394 2222 373 53474 2222 373 53564 Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 0.68 0.82 1 1.2 8.5 x 18.0 x 26.0 4.4 10.0 x 19.5 x 26.0 5.5 2222 373 53684 2222 373 53824 2222 373 53105 2222 373 53125 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 1.5 2001 Jun 22 11.0 x 21.0 x 31.0 7.8 2222 373 53155 34 BCcomponents Product specification Metallized polyester film capacitors MKT 373 GENERAL DATA MKT 373 PITCH 15/22.5/27.5 mm (COMPACT SIZE) b l 296x12(full_width) h lt Odt P CBA115 Fig.19 Outline. Specific reference data for the 630 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: C 0.1 F 0.1 F < C 0.47 F 0.47 F < C 1.0 F Rated voltage pulse slope (dU/dt)R at 630 Vdc: P = 15 mm P = 22.5 mm P = 27.5 mm R between leads, for C 0.33 F at 500 V; 1 minute RC between leads, for C > 0.33 F at 500 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 1 kHz 75 x 10-4 75 x 10-4 75 x 10-4 at 10 kHz 130 x 10-4 130 x 10-4 130 x 10-4 at 100 kHz 250 x 10-4 300 x 10-4 - 90 V/s 35 V/s 30 V/s >30000 M >10000 s >30000 M 1008 V; 1 minute 1260 V; 1 minute Available 630 V DC versions PACKAGING(1) DIMENSIONS Loose in box lt = 5.0 1.0 mm Taped on reel H = 18.5 mm; P0 = 12.7 mm Note 1. Taped on reel pitch = 27.5 mm is not available. 2001 Jun 22 35 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 5% 10% 5% 2222 373 63... 2222 373 64... 2222 373 67... 2222 373 68... preferred on request on request on request BCcomponents Product specification Metallized polyester film capacitors MKT 373 URdc = 630 V; URac = 250 V (COMPACT SIZE) CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 10% Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 5.0 x 11.0 x 17.5 1.1 6.0 x 12.0 x 17.5 1.4 7.0 x 13.5 x 17.5 1.9 8.5 x 15.0 x 17.5 2.6 10.0 x 16.5 x 17.5 3.2 2222 373 63563 2222 373 63683 2222 373 63823 2222 373 63104 2222 373 63124 2222 373 63154 2222 373 63184 2222 373 63224 Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 0.27 0.33 0.39 0.47 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 2222 373 63274 4.4 2222 373 63334 2222 373 63394 5.5 2222 373 63474 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 0.56 0.68 0.82 1 2001 Jun 22 11.0 x 21.0 x 31.0 7.8 13.0 x 23.0 x 31.0 10.5 15.0 x 25.0 x 31.0 7.8 2222 373 63564 2222 373 63684 2222 373 63824 2222 373 63105 36 BCcomponents Product specification Metallized polyester film capacitors MKT 373 GENERAL DATA MKT 373 PITCH 15/22.5/27.5 mm (STANDARD SIZE) b l 296x12(full_width) h lt Odt P CBA115 Fig.20 Outline. Specific reference data for the 100 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: 0.33 F < C 0.47 F 0.47 F < C 1.0 F 1.0 F < C 10 F C > 10 F Rated voltage pulse slope (dU/dt)R at 100 V (DC): P = 15 mm P = 22.5 mm P = 27.5 mm R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 1 kHz 75 x 10-4 75 x 10-4 75 x 10-4 75 x 10-4 at 10 kHz 130 x 10-4 130 x 10-4 150 x 10-4 - at 100 kHz 300 x 10-4 - - - 14 V/s 5 V/s 4 V/s >15000 M >5000 s >30000 M 160 V; 1 minute 200 V; 1 minute Available 100 V DC versions PACKAGING(1) DIMENSIONS Loose in box lt = 5.0 1.0 mm Taped on reel H = 18.5 mm; P0 = 12.7 mm Note 1. Taped on reel pitch = 27.5 mm is not available. 2001 Jun 22 37 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 5% 10% 5% 2222 373 21... 2222 373 22... 2222 373 25... 2222 373 26... on request on request on request on request BCcomponents Product specification Metallized polyester film capacitors MKT 373 URdc = 100 V; URac = 63 V (STANDARD SIZE) CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 10% Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.33 2222 373 21334 0.39 2222 373 21394 0.47 5.0 x 11.0 x 17.5 1.1 2222 373 21474 0.56 2222 373 21564 0.68 2222 373 21684 0.82 1 1.2 1.5 1.8 2.2 6.0 x 12.0 x 17.5 1.4 7.0 x 13.5 x 17.5 1.9 8.5 x 15.0 x 17.5 2222 373 21824 2222 373 21105 2222 373 21125 2222 373 21155 2222 373 21185 2.6 2222 373 21225 Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 2.7 3.3 3.9 4.7 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 2222 373 21275 4.4 2222 373 21335 2222 373 21395 5.5 2222 373 21475 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 5.6 6.8 8.2 10 12 15 2001 Jun 22 11.0 x 21.0 x 31.0 8.0 13.0 x 23.0 x 31.0 10.5 18.0 x 28.0 x 31.0 17.5 2222 373 21565 2222 373 21685 2222 373 21825 2222 373 21106 2222 373 21126 2222 373 21156 38 BCcomponents Product specification Metallized polyester film capacitors MKT 373 GENERAL DATA MKT 370/371/372/373 PITCH 15/22.5/27.5 mm (STANDARD SIZE) b l 296x12(full_width) h lt Odt P CBA115 Fig.21 Outline. Specific reference data for the 250 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: 0.15 F < C 0.47 F 0.47 F < C 1.0 F 1.0 F < C 4.7 F Rated voltage pulse slope (dU/dt)R at 250 V (DC): P = 15 mm P = 22.5 mm P = 27.5 mm R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 1 kHz 75 x 10-4 75 x 10-4 75 x 10-4 at 10 kHz 130 x 10-4 130 x 10-4 150 x 10-4 at 100 kHz 300 x 10-4 - - 16 V/s 7 V/s 6 V/s >30000 M >10000 s >30000 M 400 V; 1 minute 500 V; 1 minute Available 250 V DC versions PACKAGING(1) DIMENSIONS Loose in box lt = 5.0 1.0 mm Taped on reel H = 18.5 mm; P0 = 12.7 mm Note 1. Taped on reel pitch = 27.5 mm is not available. 2001 Jun 22 39 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 5% 10% 5% 2222 373 41... 2222 373 42... 2222 373 45... 2222 373 46... on request on request on request on request BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 URdc = 250 V; URac = 160 V (STANDARD SIZE) CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 10% Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 2222 373 41154 0.15 0.18 5.0 x 11.0 x 17.5 1.1 2222 373 41184 0.22 2222 373 41224 0.27 2222 373 41274 0.33 0.39 6.0 x 12.0 x 17.5 2222 373 41334 1.4 2222 373 41394 0.47 0.56 0.68 0.82 1.0 2222 373 41474 7.0 x 13.5 x 17.5 1.9 8.5 x 15.0 x 17.5 2.6 2222 373 41564 2222 373 41684 2222 373 41824 2222 373 41105 Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 1.2 1.5 1.8 2.2 8.5 x 18.0 x 26.0 4.4 10.0 x 19.5 x 26.0 5.5 2222 373 41125 2222 373 41155 2222 373 41185 2222 373 41225 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 2.7 3.3 3.9 4.7 2001 Jun 22 13.0 x 23.0 x 31.0 10.4 15.0 x 25.0 x 31.0 12.5 2222 373 41275 2222 373 41335 2222 373 41395 2222 373 41475 40 BCcomponents Product specification Metallized polyester film capacitors MKT 373 GENERAL DATA MKT 370/371/372/373 PITCH 15/22.5/27.5 mm (STANDARD SIZE) b l 296x12(full_width) h lt Odt P CBA115 Fig.22 Outline. Specific reference data for the 400 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: C 0.1 F 0.1 F < C 0.47 F 0.47 F < C 1.0 F 1.0 F < C 1.5 F Rated voltage pulse slope (dU/dt)R at 400 V (DC): P = 15 mm P = 22.5 mm P = 27.5 mm R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 1 kHz 75 x 10-4 75 x 10-4 75 x 10-4 75 x 10-4 at 10 kHz 130 x 10-4 130 x 10-4 130 x 10-4 150 x 10-4 at 100 kHz 250 x 10-4 300 x 10-4 - - 34 V/s 14 V/s 12 V/s >30000 M >10000 s >30000 M 640 V; 1 minute 800 V; 1 minute Available 400 V DC versions PACKAGING(1) DIMENSIONS Loose in box lt = 5.0 1.0 mm Taped on reel H = 18.5 mm; P0 = 12.7 mm Note 1. Taped on reel pitch = 27.5 mm is not available. 2001 Jun 22 41 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 5% 10% 5% 2222 373 51... 2222 373 52... 2222 373 55... 2222 373 56... on request on request on request on request BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 URdc = 400 V; URac = 220 V (STANDARD SIZE) CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) LOOSE IN BOX MASS (g) lt = 5.0 1.0 mm C-tol = 10% Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.047 2222 373 51473 0.056 2222 373 51563 0.068 5.0 x 11.0 x 17.5 1.1 2222 373 51683 0.082 2222 373 51823 0.1 2222 373 51104 0.12 2222 373 51124 0.15 0.18 0.22 0.27 0.33 6.0 x 12.0 x 17.5 1.4 7.0 x 13.5 x 17.5 1.9 8.5 x 15.0 x 17.5 2.6 2222 373 51154 2222 373 51184 2222 373 51224 2222 373 51274 2222 373 51334 Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 0.39 0.47 0.56 0.68 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 2222 373 51394 4.4 2222 373 51474 4.4 2222 373 51564 5.5 2222 373 51684 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 0.82 1 1.2 1.5 2001 Jun 22 11.0 x 21.0 x 31.0 15.0 x 25.0 x 31.0 2222 373 51824 7.8 2222 373 51105 2222 373 51125 12.8 2222 373 51155 42 BCcomponents Product specification Metallized polyester film capacitors CONSTRUCTION MKT 370/371/372/373 SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK Description In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: * Low-inductive wound cell of metallized polyethylene terephthalate (PETP) film, potted with epoxy resin in a flame-retardant case * For pitches of 15 mm capacitors shall be mechanically fixed by the leads. * Radial leads, solder-coated * Small stand-off pips allow removal of solder flux etc. during cleaning of the printed-circuit board. * For larger pitches the capacitors shall be mounted in the same way and the body clamped. SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD The maximum length and width of film capacitors is shown in Fig.24: * Eccentricity see Fig.24. The maximum eccentricity is smaller than or equal to the wire diameter of the product concerned. metallized polyester film 144x12(halfpage) * Product height with seating plane as given by "IEC 60717" as reference: hmax h +0.3 mm. metal spray layer 144x12(halfpage) bmax = b + 0.3 mm eccentricity connecting wire CBA073 lmax = l + 0.3 mm CBA116 Fig.23 Construction. Fig.24 Lay-out. Mounting Storage temperature NORMAL USE * Storage temperature: Tstg = -25 to +40 C with RH maximum 80% without condensation. The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by automatic insertion machines. For detailed tape specifications refer to this handbook, chapter "Packaging information". RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply to an ambient free air temperature of 23 1 C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 2%. For reference testing, a conditioning period shall be applied over 96 4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. 2001 Jun 22 43 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 CHARACTERISTICS Capacitance CBA117 2 296x12(full_width C/C (%) 1 0 -1 -2 -3 10 2 10 3 10 4 10 5 f (Hz) Fig.25 Capacitance change as a function of frequency; typical curve. CBA932 296x12(full_width) 6 C/C (%) 4 2 0 -2 a. 63V, MKT 370; 0.12 to 1.5 F b. 400V and 630 V series c. 250V series d. 100V series e. 63V except MKT 370; 0.12 to 1.5 F a b max. c typical d e -4 min. -6 -60 -20 20 60 Tamb (C) Fig.26 Capacitance change at 1 kHz as a function of ambient free air temperature. 2001 Jun 22 44 100 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 Impedance CBA119 296x12(full_width 10 2 MKT 370 Impedance () 10 1 63V ; 10 63V ;1 250 V; 1 0 0 nF F nF 10 0 10-1 10-2 10-3 10 4 10 5 10 6 10 7 10 8 f (Hz) Fig.27 Impedance as a function of frequency; typical curves. Maximum DC and AC voltage as a function of temperature 1.2 296x12(full_width) factor CBB332 1.0 0.8 0.6 0.4 0.2 0 -60 -40 -20 0 20 40 60 80 Tamb (C) Fig.28 Multiplying factor for DC and AC voltage as a function of temperature. 2001 Jun 22 45 100 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 Maximum RMS voltage (sinewave) as a function of frequency CBA120 296x12(full_width) 10 2 MKT 370 AC voltage (V) 10 1 56 n 10 F 0n 22 F 0n F 10 00 nF 10 0 10 1 10 2 10 3 10 4 10 5 f (Hz) Fig.29 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 63 V. CBA788 296x12(full_width) 10 2 MKT 370 AC voltage (V) 10 1 56 nF 0n 22 F 0n F 10 00 nF 10 10 0 10 1 10 2 10 3 10 4 f (Hz) Fig.30 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 63 V. 2001 Jun 22 46 10 5 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 CBA121 296x12(full_width) 10 2 MKT 370 AC voltage (V) 12 22 47 10 1 10 nF nF nF 0n F 33 0n F 10 0 10 1 10 2 10 3 10 4 10 5 f (Hz) Fig.31 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 100 V. CBA789 296x12(full_width) 10 2 MKT 370 AC voltage (V) 10 1 33 12 n 22 F nF 47 10 nF 0n F 0n F 10 0 10 1 10 2 10 3 10 4 f (Hz) 10 5 Fig.32 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 100 V. 2001 Jun 22 47 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 CBA122 296x12(full_width) 10 3 MKT 370 AC Voltage (V) 10 2 4.7 nF 10 n 22 F 47 nF 100nF nF 10 1 10 0 10 1 10 2 10 3 10 4 10 f (Hz) 5 Fig.33 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 250 V. CBA790 296x12(full_width) 10 3 MKT 370 AC Voltage (V) 10 2 10 1 10 0 10 1 4.7 nF 10 22 nF n F 4 1007 nF nF 10 2 10 3 10 4 f (Hz) 10 5 Fig.34 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 250 V. 2001 Jun 22 48 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 CBA123 296x12(full_width) 10 3 MKT 370 AC Voltage (V) 10 2 1.0 nF 2.2 nF 4.7 10 nF n 33 F nF 10 1 10 0 10 1 10 2 10 3 10 4 10 f (Hz) 5 Fig.35 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 400 V. CBA791 296x12(full_width) 10 3 MKT 370 AC Voltage (V) 10 2 1.0 n 2.2 F n 4.7 F 10 nF 33 nF nF 10 1 10 0 10 1 10 2 10 3 10 4 f (Hz) 10 5 Fig.36 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 400 V. 2001 Jun 22 49 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 CBA124 296x12(full_width) 10 2 MKT 371 AC voltage (V) 10 1 10 0 22 nF 0 47 nF 0n F 10 00 nF 10 0 10 1 10 2 10 3 10 4 10 5 f (Hz) Fig.37 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 63 V. CBA792 296x12(full_width) 10 2 MKT 371 AC voltage (V) 10 1 10 22 0 nF 0n 4 F 10 70 n 00 F nF 10 0 10 1 10 2 10 3 10 4 f (Hz) Fig.38 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 63 V. 2001 Jun 22 50 10 5 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 CBA125 296x12(full_width) 10 2 MKT 371 AC voltage (V) 22 nF 47 n 10 F 0n 22 F 0 47 nF 0n F 10 1 10 0 10 1 10 2 10 3 10 4 10 5 f (Hz) Fig.39 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 100 V. CBA793 296x12(full_width) 10 2 MKT 371 AC voltage (V) 10 1 22 nF 47 10 nF 0n 22 F 0n 47 F 0n F 10 0 10 1 10 2 10 3 10 4 f (Hz) 10 5 Fig.40 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 100 V. 2001 Jun 22 51 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 CBA126 296x12(full_width) 10 3 MKT 371 AC Voltage (V) 10 2 10 n 22 F nF 47 100 nF nF 10 1 10 0 10 1 10 2 10 3 10 4 10 f (Hz) 5 Fig.41 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 250 V. CBA794 296x12(full_width) 10 3 MKT 371 AC Voltage (V) 10 2 10 1 10 n 22 F nF 47 n 100 F nF 10 0 10 1 10 2 10 3 10 4 f (Hz) 10 5 Fig.42 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 250 V. 2001 Jun 22 52 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 CBA127 296x12(full_width) 10 3 MKT 371 AC Voltage (V) 10 2 4.7 nF 15 nF 10 1 10 0 10 1 10 2 10 3 10 4 10 5 f (Hz) Fig.43 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 400 V. CBA795 296x12(full_width) 10 3 MKT 371 AC Voltage (V) 10 2 4.7 10 nF 15 nF nF 10 1 10 0 10 1 10 2 10 3 10 4 f (Hz) 10 5 Fig.44 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 400 V. 2001 Jun 22 53 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 CBA128 296x12(full_width) 10 2 MKT 372 AC voltage (V) 10 0n F 0n F 47 0n F 10 1 22 10 0 10 1 10 2 10 3 10 4 10 5 f (Hz) Fig.45 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 100 V. CBA796 296x12(full_width) 10 2 MKT 372 AC voltage (V) 10 1 10 0n F 22 47 0n 0n F F 10 0 10 1 10 2 10 3 10 4 f (Hz) 10 5 Fig.46 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 100 V. 2001 Jun 22 54 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 CBA129 296x12(full_width) 10 3 MKT 372 AC Voltage (V) 10 2 47 nF 150 nF 10 1 10 0 10 1 10 2 10 3 10 4 10 5 f (Hz) Fig.47 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 250 V. CBA797 296x12(full_width) 10 3 MKT 372 AC Voltage (V) 10 2 10 1 47 nF 150 nF 10 0 10 1 10 2 10 3 10 4 f (Hz) 10 5 Fig.48 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 250 V. 2001 Jun 22 55 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 CBA130 296x12(full_width) 10 3 MKT 372 AC Voltage (V) 10 2 4.7 nF 10 nF 22 n 47 F nF 10 1 10 0 10 1 10 2 10 3 10 4 10 5 f (Hz) Fig.49 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 400 V. CBA798 296x12(full_width) 10 3 MKT 372 AC Voltage (V) 10 2 4.7 10 1 10 nF nF 22 n 47 F nF 10 0 10 1 10 2 10 3 10 4 f (Hz) 10 5 Fig.50 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 400 V. 2001 Jun 22 56 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 CBB300 296x12(full_width) 10 3 MKT 372 AC Voltage (V) 10 2 10 nF 22 n 47 F nF 10 1 10 0 10 1 10 2 10 3 10 4 10 5 f (Hz) Fig.51 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 630 V. CBB301 296x12(full_width) 10 3 MKT 372 AC Voltage (V) 10 2 10 nF 22 47 nF nF 10 1 10 0 10 1 10 2 10 3 10 4 f (Hz) 10 5 Fig.52 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 630 V. 2001 Jun 22 57 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 CBA800 296x12(full_width) 10 2 MKT 373 AC voltage (V) 10 1 47 0n F 2.2 10 0 10 1 10 2 10 3 10 4 F 10 5 f (Hz) Fig.53 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 100 V (2222 373 23...; 24...; 27...; 28... compact size types). CBA801 296x12(full_width) 10 2 MKT 373 AC voltage (V) 10 1 47 0n F 2.2 10 0 10 1 10 2 10 3 10 4 F f (Hz) Fig.54 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 100 V (2222 373 23...; 24...; 27...; 28... compact size types). 2001 Jun 22 58 10 5 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 CBA803 296x12(full_width) 10 3 MKT 373 AC Voltage (V) 10 2 10 1 10 0 10 1 470 2.2 nF 4.7 F F 10 2 10 3 10 4 10 5 f (Hz) Fig.55 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 250 V (2222 373 43...; 44...; 47...; 48... compact size types). CBA804 296x12(full_width) 10 3 MKT 373 AC Voltage (V) 10 2 10 1 10 0 1 10 470 2.2 nF 4.7 F F 10 2 10 3 10 4 f (Hz) Fig.56 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 250 V (2222 373 43...; 44...; 47...; 48... compact size types). 2001 Jun 22 59 10 5 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 CBA806 296x12(full_width) 10 3 MKT 373 AC Voltage (V) 10 2 100 nF 470 nF 1.5 F 10 1 10 0 10 1 10 2 10 3 10 4 10 f (Hz) 5 Fig.57 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 400 V (2222 373 53...; 54...; 57...; 58... compact size types). CBA807 296x12(full_width) 10 3 MKT 373 AC Voltage (V) 10 2 10 1 100 nF 470 1.5 nF F 10 0 10 1 10 2 10 3 10 4 f (Hz) Fig.58 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 400 V (2222 373 53...; 54...; 57...; 58... compact size types). 2001 Jun 22 60 10 5 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 CBA808 296x12(full_width) 10 3 MKT 373 AC Voltage (V) 10 2 10 n 220 0 F 1.0 nF F 10 1 10 0 10 1 10 2 10 3 10 4 10 f (Hz) 5 Fig.59 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 630 V (2222 373 63...; 64...; 67...; 68... compact size types). CBA823 296x12(full_width) 10 3 MKT 373 AC Voltage (V) 10 2 10 1 10 n 220 0 F 1.0 nF F 10 0 10 1 10 2 10 3 10 4 f (Hz) Fig.60 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 630 V (2222 373 63...; 64...; 67...; 68... compact size types). 2001 Jun 22 61 10 5 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 CBA131 296x12(full_width) 10 2 MKT 373 AC voltage (V) 10 1 47 0n F 4.7 15 10 0 10 1 10 2 10 3 10 4 F F 10 5 f (Hz) Fig.61 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 100 V (2222 373 21...; 22...; 25...; 26... standard size types). CBA799 296x12(full_width) 10 2 MKT 373 AC voltage (V) 10 1 47 4.7 15 10 0 10 1 10 2 10 3 10 4 0n F F F f (Hz) Fig.62 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 100 V (2222 373 21...; 22...; 25...; 26... standard size types). 2001 Jun 22 62 10 5 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 CBA132 296x12(full_width) 10 3 MKT 373 AC Voltage (V) 10 2 10 1 10 0 10 1 47 1. 0 nF 4.70 F F 10 2 10 3 10 4 10 5 f (Hz) Fig.63 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 250 V (2222 373 41...; 42...; 45...; 46... standard size types). CBA802 296x12(full_width) 10 3 MKT 373 AC Voltage (V) 10 2 10 1 10 0 1 10 47 1.00 nF 4.7 F F 10 2 10 3 10 4 f (Hz) Fig.64 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 250 V (2222 373 41...; 42...; 45...; 46... standard size types). 2001 Jun 22 63 10 5 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 CBA133 296x12(full_width) 10 3 MKT 373 AC Voltage (V) 10 2 100 n 470 F 1.5 nF F 10 1 10 0 10 1 10 2 10 3 10 4 10 f (Hz) 5 Fig.65 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 400 V (2222 373 51...; 52...; 55...; 56... standard size types). CBA805 296x12(full_width) 10 3 MKT 373 AC Voltage (V) 10 2 10 1 100 470 nF 1.5 nF F 10 0 10 1 10 2 10 3 10 4 f (Hz) 10 5 Fig.66 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 400 V (2222 373 51...; 52...; 55...; 56... standard size types). Maximum RMS current (sinewave) as a function of frequency The maximum RMS current is defined by I ac = x C x U ac . Uac is the maximum AC voltage depending on the ambient temperature in Figs 29 to 66. 2001 Jun 22 64 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 Tangent of loss angle CBA134 296x12(full_width) 10 3 dissipation factor (x 10-4) 5 4 3 2 1 10 2 C 0.33 F (curve 1) 0.33 F < C 1.2 F (curve 2) 1.2 F < C 3.9 F (curve 3) 3.9 F < C < 6.8 F (curve 4) C 6.8 F (curve 5) 10 1 10 2 10 3 10 4 f (Hz) 10 5 Fig.67 Tangent of loss angle as a function of frequency; typical curve. Insulation resistance CBA135 5 296x12(full_width) 10 RC (s) 10 4 10 3 10 2 -50 0 50 Tamb (C) Fig.68 RC product as a function of ambient free air temperature; typical curve. 2001 Jun 22 65 100 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 Maximum allowed component temperature rise (T) as a function of the ambient temperature (Tamb) CBB191 16 296x12(full_width) T 14 (C) 12 10 8 6 4 2 0 -60 -40 -20 0 20 40 60 80 100 Tamb (C) Fig.69 Maximum allowed component temperature rise as a function of the ambient temperature. Heat conductivity (G) as a function of pitch and capacitor body thickness in mW/C Table 1 Heat conductivity bmax (mm) 2.5 3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.5 10.0 11.0 13.0 15.0 18.0 PITCH (mm) 5 2.5 - 3.0 - 4.0 - 5.5 - - - - - - - 7.5 3 4 - 5 - 6 7 - - - - - - - 10 - - - 6.0 - 7.5 9.0 - - - - - - - 15 - - - - - 10 11 12 16 18 - - - - 22.5 - - - - - - 19 21 25 28 - - - - 27.5 - - - - - - - - - - 36 42 48 57 Power dissipation and maximum component temperature rise The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The power dissipation can be calculated according chapter "Introduction", section "Maximum power dissipation". The component temperature rise (T) can be measured (see section "Measuring the component temperature" for more details) or calculated by T = P G : * T = component temperature rise (C). * P = power dissipation of the component (mW). * G = heat conductivity of the component (mW/C). 2001 Jun 22 66 BCcomponents Product specification Metallized polyester film capacitors Measuring the component temperature A thermocouple must be attached to the capacitor body as in Fig.70. 144x12(halfpage) thermocouple CBA758 Fig.70 Mounting the thermocouple. The temperature is measured in unloaded (Tamb) and maximum loaded condition (Tc). The temperature rise is given by T = T c - T amb . To avoid radiation or convection, the capacitor should be tested in a wind-free box. 2001 Jun 22 67 MKT 370/371/372/373 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 Application note and limiting conditions These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc). 2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum Up-p to avoid the ionisation inception level. 3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URdc and divided by the applied voltage. For all other pulses following equation must be fulfilled: T 2 dU dU 2 x -------- x dt < U Rdc x -------- dt dt rated 0 T is the pulse duration. 4. The maximum component surface temperature rise must be lower than the limits in Fig.69. 5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values mentioned in Table 1 "Heat conductivity". 6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with an impedance to the mains the applicant must guarantee that following conditions are fulfilled in any case (spikes and surge voltages from the mains included). VOLTAGE CONDITIONS FOR 6 ABOVE Tamb 85 C 85 C < Tamb 105 C URac 0.8 x URac Maximum temporary RMS -overvoltage (<24 hours) 1.25 x URac 1.0 x URac Maximum peak voltage (Vo-p) (<2 s) 1.6 x URdc 1.3 x URdc ALLOWED VOLTAGES Maximum continuous RMS voltage 2001 Jun 22 68 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 Example C = 3300 nF - 100 V used for the voltage signal shown in Fig.71. Up-p = 80 V; Up = 70 V; T1 = 0.5 ms; T2 = 1 ms. The ambient temperature is 35 C. Checking the conditions: 1. The peak voltage Up = 70 V is lower than 100 V (DC). 2. The peak-to-peak voltage 80 V is lower than 2 x 2 x 63 V ( AC ) = 178 U p - p . 3. The voltage pulse slope dU/dt = 80 V/500 s = 0.16 V/s. This is lower than 8 V/s (see specific reference data for each version). 4. The dissipated power is 60 mW as calculated with Fourier terms. 60 mW The temperature rise for bmax = 7.0 mm and pitch = 15 mm will be ------------------------------- = 5 C . 12 mW C This is lower than 15 C temperature rise at 35 C; see Fig.69. 5. Not applicable. 6. Not applicable. 296x12(full_width) voltage Up Up-p time T1 T2 CBA865 Fig.71 Voltage signal. 2001 Jun 22 69 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 MARKING Product marking FRONT FACE CAPACITORS WITH PITCH = 5.08 mm: STYLE 2222 370 144x12(halfpage) The capacitors are marked on the side (see Fig.72) with the following information: 820n K 63V BC 0001 370 1. Capacitance code in accordance with "IEC 60062" 2. Tolerance on rated capacitance: K = 10%; J = 5% 3. Rated voltage (DC) (e.g. 63 V) 4. Code for manufacturer CBB072 5. Year and week of manufacture (e.g. 0001) Fig.72 Example of marking for a capacitor with pitch = 5.08 mm. 6. Manufacturer's type designation (e.g. 370). CAPACITORS WITH PITCH = 7.62 mm: STYLE 2222 371 The capacitors are marked on the side (see Fig.73) with the following information: 1. Capacitance code in accordance with "IEC 60062" 144x12(halfpage) 2. Tolerance on rated capacitance: K = 10%; J = 5% 3. Rated voltage (DC) (e.g. 100 V) FRONT FACE 100n K 100V BC 0001 371 4. Code for manufacturer 5. Year and week of manufacture (e.g. 0001) 6. Manufacturer's type designation (e.g. 371). CBB048 Fig.73 Example of marking for a capacitor with pitch = 7.62 mm. CAPACITORS WITH PITCH = 10 mm: STYLE 2222 372 The capacitors are marked on the side (see Fig.74) with the following information: 144x12(halfpage) 1. Year and week of manufacture (e.g. 0001) FRONT FACE 0001 100 n K 100V MKT 372 BC-HQ 2. Capacitance code in accordance with "IEC 60062" 3. Tolerance on rated capacitance: K = 10%; J = 5%; 4. Rated voltage (DC) (e.g. 100 V) 5. Code for dielectric material (MKT) CBB049 6. Manufacturer's type designation (e.g. 372) 7. Code for manufacturer. Fig.74 Example of marking for a capacitor with pitch = 10 mm. 8. Code for factory of origin (HQ) 2001 Jun 22 70 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 CAPACITORS WITH PITCH = 15 mm: STYLES 2222 373 The capacitors are marked on the top (see Fig.75) with the following information: 1. Rated capacitance code in accordance with "IEC 60062" HEAD FACE 144x12(halfpage) 2. Tolerance on rated capacitance: K = 10%; J = 5% FRONT FACE 470n K 100V 373 MKT BC HQ0001 3. Rated voltage (DC) (e.g. 100 V) 4. Manufacturer's type designation (373) 5. Code for dielectric material (MKT); CBB050 and on the side with the following information: 1. Manufacturer Fig.75 Example of marking for a capacitor with pitch = 15.0 mm. 2. Code for factory of origin (HQ) 3. Year and week of manufacture (e.g. 0001). CAPACITORS WITH PITCH = 22.5 AND 27.5 mm: STYLES 2222 373 The capacitors are marked on the top (see Fig.76) with the following information: 144x12(halfpage) 1. Rated capacitance code in accordance with "IEC 60062" 2. Tolerance on rated capacitance: K = 10%; J = 5% HEAD FACE 22 K 100V BC 373 MKT HQ0001 3. Rated voltage (DC) (e.g. 100 V) 4. Manufacturer CBB051 5. Manufacturer's type designation (373) 6. Code for dielectric material (MKT) Fig.76 Example of marking for a capacitor with pitch = 22.5 and 27.5 mm. 7. Code for factory of origin (HQ) 8. Year and week of manufacture (e.g. 0001). 2001 Jun 22 71 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 Package marking The package containing the capacitors is marked as shown in Fig.77. Barcode label marking LINE MARKING EXPLANATION 1 Manufacturer's name 2 Country of origin 3 Sub-family 4 Type description 5 Capacitance value in F, tolerance, voltage and climatic category ("IEC 60068-1") 6 - 7 Preference origin code: A Country of origin in code: 170 (Belgium) Responsible production centre: HQ WO: work order Wage number of final inspection (only for capacitors with pitch = 5, 7.5 and 10 mm) 8 Product type description 9 Quantity and production period, year and week code 10 Product code (12NC) Fig.77 Barcode label. 2001 Jun 22 72 BCcomponents Product specification Metallized polyester film capacitors MKT 370/371/372/373 QUICK REFERENCE TEST REQUIREMENTS TEST PROCEDURE (quick reference) REQUIREMENTS Robustness of leads Tensile strength: "IEC 60068-2-21" load 10 N; 10 s Bending: "IEC 60068-2-21" load 5 N; 4 x 90 Resistance to soldering heat: "IEC 60068-2-20" solder bath: 260 C; 10 s Component solvent resistance isopropyl alcohol; 23 C; 5 minutes no visible damage legible marking C/C 2% tan 30 x 10-4; note 1 Robustness of component Vibration: "IEC 60068-2-6" Shock: "IEC 60068-2-27" 10 to 55 Hz; amplitude 0.75 mm or acceleration 98 m/s2; 6 hours m/s2; half sinewave; 490 11 ms C/C 3% tan 30 x 10-4; note 1 Climatic sequence Dry heat: "IEC 60068-2-2" 16 hours; 105 C Damp heat cyclic, test Db, first cycle: "IEC 60068-2-30" Cold: "IEC 60068-2-1" C/C 3% tan 50 x 10-4; note 1 2 hours; -55 C Rins 50% of specified value Damp heat, test Db, remaining cycles: "IEC 60068-2-30" Other applicable tests Damp heat, steady state: "IEC 60068-2-3" 56 days; 40 C; 90 to 95% RH C/C 5% Endurance (DC): "IEC 60384-2" 2000 hours; 1.25 x URdc; 85 C 1 x URdc; 105 C C/C 5% Heat storage: "IEC 60384-2" 2000 hours; 105 C C/C 3% Endurance (AC): "IEC 60384-2" 1000 hours: 1.1 x URac; 85 C tan 50 x 10-4; note 1 Rins 50% of specified value tan 30 x 10-4; note 1 Rins 50% of specified value tan 30 x 10-4; note 1 C/C 8% (style 370) C/C 5% (style 371) C/C 3% (style 372 and 373) tan 30 x 10-4; note 1 2001 Jun 22 73 BCcomponents Product specification Metallized polyester film capacitors PROCEDURE (quick reference) TEST Resistance to detergents MKT 370/371/372/373 3 minutes in dishwater at 70 C REQUIREMENTS C/C 1% tan 30 x 10-4; note 1 Rins 50% of specified value Resistance to soldering heat with preheating: "IEC 60384-2" body temperature: 100 C; bath temperature: 260 C; dwell time: 5 s Passive flammability "IEC 60384-1" Class C tan 30 x 10-4; note 1 no burning Note 1. Measuring frequency 10 kHz. 2001 Jun 22 C/C 2% 74