ImpactTM Backplane Connector System Impact Backplane Connector System Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7 Daughter Card Receptacle Assemblies 6 Pair Daughter Card Receptacle Assemblies 5 Pair Daughter Card Receptacle Assemblies 4 Pair Daughter Card Receptacle Assemblies 3 Pair Daughter Card Receptacle Assemblies 2 Pair Daughter Card Receptacle Assemblies ..................................8 ..................................9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Mezzanine Assemblies 5 Pair Mezzanine Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Backplane Header Assemblies 6 Pair Backplane Header Assemblies 5 Pair Backplane Header Assemblies 4 Pair Backplane Header Assemblies 3 Pair Backplane Header Assemblies 2 Pair Backplane Header Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Coplanar Header (RAM) Assemblies 2 Pair Coplanar Header (RAM) Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Orthogonal Receptacle Assemblies 6 Pair Orthogonal Receptacle Assemblies 5 Pair Orthogonal Receptacle Assemblies 4 Pair Orthogonal Receptacle Assemblies 3 Pair Orthogonal Receptacle Assemblies Disclaimer While TE has made every reasonable effort to ensure the accuracy of the information in this catalog, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the informa-tion is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. (c) Copyright 2011 Tyco Electronics Corporation. All Rights Reserved. MULTIGIG RT, Z-PACK, Z-PACK HM-Zd, Z-PACK HS3, Z-PACK Slim UHD, Z-PACK TinMan, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks of the TE Connectivity Ltd family of companies. Impact is a trademark of Molex, Inc. Other logos, product and Company names mentioned herein may be trademarks of their respective owners. Orthogonal Header Assemblies 6 Pair Orthogonal Header Assemblies 5 Pair Orthogonal Header Assemblies 4 Pair Orthogonal Header Assemblies 3 Pair Orthogonal Header Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Global Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Visit the Impact connector webpage at: www.te.com/products/impact 2 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Introduction Product Facts Differential pair density up to 80 pairs per linear inch Broad-edge-coupled, differential-pair system PCB routing complexity and costs are reduced by using 1.90 mm by 1.35 mm (.075" by .053") grid on backplane and daughter card Offers flexibility and advanced mechanical and electrical performance with two compliant-pin attach options Inline staggered, bifurcated contact beams in daughter card interface provides improved mating performance Industry Applications Telecommunications equipment Hubs, routers, switches Central office, cellular infrastructure and multi-platform service (DSL, Cable Data) systems Data networking equipment Servers Storage Test and measurement equipment Medical diagnostic equipment Technical Documents Product Specification 108-2351 Application Specification 114-13258 TE Connectivity offers a variety of backplane/ midplane solutions to meet the demand for increased network bandwidth and advanced technology. Each solution is designed for high performance, increased density and compatibility with industry-standard interfaces. TE provides a user-friendly transition between the PCBmounted connector and the backplane/ midplane. TE has extensive knowledge and expertise on high-speed interface design. Your specific needs can be customized and transformed into new manufacturable designs. The Impact backplane connector and cable system from TE pushes the speed and density envelope to meet the growing demands of next-generation telecommunication and data net- working equipment; the system is available in 2-6 pair configurations with a complete range of guidance and power-solution options plus right-angle cable assemblies. Material and Finish The Impact system is available in two compliantpin design options on both daughter card and backplane connectors, providing customers ultimate flexibility to optimize their designs for advanced mechanical and electrical performance. The Impact system's mating interface provides in-line staggered, bifurcated contacts that provide 2 points of contact for the long-term reliability performance and built-in, ground-signal sequencing. This reduces the average mating force per connector to improve the mechanical mating performance of the system. Platings Signal Contact -- High Performance Copper (Cu) Alloy Ground Contact -- High Performance Copper (Cu) Alloy Housing -- Liquid Crystal Polymer, UL 94V-0 Contact Area -- 0.76 m (30 ") Gold (Au) min. Solder Tail Area -- Tin (Sn) or Tin/Lead (Sn/Pb) Underplating -- Nickel (Ni) PCB Thickness -- 1.60 mm (.062") typical Ratings Temperature Range -- -55C to 85C max. Current Rating -- 0.75 A per pin max. Durability -- 200 cycles Operating Voltage -- 30 VAC RMS/ DC max. Mating Force -- 0.30 N (9.066 lb) max. per pin Compliant Pin Retention Force to PCB -- 3.56 N (.80 lb) per compliant pin average min. Compliant Pin Insertion Force to PCB -- 26.7 N (6.0 lb) max. per contact Signal Integrity Insulation Resistance -- 10,000 Megohms min. Visit the Impact connector webpage at: www.te.com/products/impact 3 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Introduction (Continued) 3-6 Gb/s Data Rate 10-15 Gb/s 15-20 Gb/s 6-10 Gb/s 20-25 Gb/s 25+ Gb/s Impact Connector 40 DP/in 16 DP/cm Z-PACK TinMan 100 and 85 Connectors 40 DP/in 16 DP/cm Z-PACK Slim UHD CS Connector Z-PACK Slim UHD HS Connector 36 DP/in 14 DP/cm 70 DP/in 26 DP/cm Z-PACK HM-Zd Plus Connector Z-PACK HM-Zd Connector 40 DP/in 16 DP/cm 40 DP/in 16 DP/cm MULTIGIG RT Connector 57 DP/in 23 DP/cm Z-PACK HS3 Connector 60 DP/in 24 DP/cm 2 Pair Impact Connector 3 Pair Impact Connector 4 Pair Impact Connector 5 Pair Impact Connector 6 Pair Impact Connector Header Width (W) 12.65 mm 16.70 mm 20.75 mm 24.8 mm 28.85 mm Pairs/Inch 27 40 54 67 80 Receptacles 2057405-1 2007705-1 2007717-1 2110106-1 2007741-1 2 Pair 3 Pair 4 Pair 5 Pair 6 Pair Headers 2057428-1 2007786-1 2007818-1 2007850-1 2007882-1 All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB plated thru holes by contacting the respective country product information center listed on the bottom of each page. W 6 Pair 5 Pair 4 Pair 3 Pair 2 Pair Visit the Impact connector webpage at: www.te.com/products/impact 4 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Introduction (Continued) Impact Connector Family Standard, Monoblock Solutions 2 Pair Impact (W = 12.65 mm) Density = 27 Pairs/Inch 10 column = 20 Diff. Pairs 16 column = 32 Diff. Pairs 3 Pair Impact (W = 16.7 mm) Density = 40 Pairs/Inch 10 column = 30 Diff. Pairs 16 column = 48 Diff. Pairs End-to-End Stackable Example 4 Pair Impact (W = 20.75 mm) Density = 54 Pairs/Inch 10 column = 40 Diff. Pairs 16 column = 64 Diff. Pairs 5 Pair Impact (W = 24.80 mm) Density = 67 Pairs/Inch 10 column = 50 Diff. Pairs 16 column = 80 Diff. Pairs 6 Pair Impact (W = 28.85 mm) Density = 80 Pairs/Inch 10 column = 60 Diff. Pairs 16 column = 96 Diff. Pairs End Wall Separation Example Visit the Impact connector webpage at: www.te.com/products/impact 5 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Introduction (Continued) Worst Case Crosstalk All NEXT 2.7% All FeXT 0.7% Recommended Pinout (as shown below) 1.5% Test Data Vertical Header -- Right-Angle Receptacle 4 pair connector module 1.9 mm column pitch 0.0146" plated through holes 50 ps (20-80%) edge rate Includes two 1.5 mm [0.060] vias to bottom layer traces 0.0 -1.0 -2.0 -3.0 Magnitude (dB) Differential Insertion Loss -4.0 -5.0 -6.0 -7.0 Asynchronous noise sum of peaks from each aggressor, divided by differential swing (A-B) -8.0 -9.0 -10.0 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (GHz) 7.0 8.0 40.2 40.3 9.0 10.0 Differential Impedance 120.0 115.0 Impedance (Ohms) 110.0 105.0 100.0 95.0 90.0 85.0 80.0 39.5 39.6 39.7 39.8 39.9 40.0 Time (ns) 40.1 40.4 40.5 Visit the Impact connector webpage at: www.te.com/products/impact 6 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Introduction (Continued) Impact High Performance Cable Assembly Planned: 3 x 16 wafer stack --96 diff. pair total Impact wafer to wafer pitch -- 3.8 mm Assumes 3 m length -- 26 AWG raw cable Integral guidance Robust, stamped, metal wafer stack stiffener 100 Ohm Pair Size 2 Pair 3 Pair 4 Pair 5 Pair 6 Pair Columns 10 16 8 10 16 8 10 16 10 12 16 10 14 16 Pins 60 96 72 90 144 96 120 192 150 180 240 180 252 288 Pairs 20 32 24 30 48 32 40 64 50 60 80 60 84 96 Columns 10 16 Pins 150 240 Pairs 50 80 85 Ohm Pair Size 5 Pair Visit the Impact connector webpage at: www.te.com/products/impact 7 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Daughter Card Receptacle Assemblies 6 Pair Daughter Card Receptacle Assemblies Column 10 16 Guide Part Number Left Right Unguided Left Right Unguided 2007739-1 2007740-1 2007741-1 2007745-1 2007746-1 2007747-1 A 26.6 26.6 19 38 38 30.4 Dimension B 37.3 37.3 37.3 37.3 37.3 37.3 C 17.1 17.1 17.1 28.5 28.5 28.5 Application Tooling Mates With 2018534-1 2018534-1 2018534-1 2018535-1 2018535-1 2018535-1 2007873-1 2007877-1 2007886-1 2007889-1 2007893-1 2007902-1 Note: 10 column part number 2007739-1 is pictured below. All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB plated thru holes by contacting the respective country product information center listed on the bottom of each page. B Ref. A Max. C Key Position Chart None A E B F C G D H Recommended PCB Layout Min. Board Thickness 1.0 Visit the Impact connector webpage at: www.te.com/products/impact 8 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Daughter Card Receptacle Assemblies (Continued) 5 Pair Daughter Card Receptacle Assemblies Column 10 16 Guide Part Number Left Right Unguided Left Right Unguided 2110104-1 2110105-1 2110106-1 2110122-1 2110123-1 2110124-1 A 26.6 26.6 19.0 38.0 38.0 30.4 Dimension B 32.3 32.3 32.3 32.3 32.3 32.3 C 17.1 17.1 17.1 28.5 28.5 28.5 Application Tooling Mates With 2018448-1 2018448-1 2018448-1 2018532-1 2018532-1 2018532-1 2007841-1 2007845-1 2007854-1 2007857-1 2007861-1 2007870-1 Note: 10 column part number 2110104-1 is pictured below. All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB plated thru holes by contacting the respective country product information center listed on the bottom of each page. B Ref. A Max. C Key Position Chart None A E B F C G D H Recommended PCB Layout Min. Board Thickness 1.0 Visit the Impact connector webpage at: www.te.com/products/impact 9 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Daughter Card Receptacle Assemblies (Continued) 4 Pair Daughter Card Receptacle Assemblies Column 10 16 Guide Part Number Left Right Unguided Left Right Unguided 2007715-1 2007716-1 2007717-1 2007721-1 2007722-1 2007723-1 A 26.6 26.6 19 38 38 30.4 Dimension B 28.2 28.2 28.2 28.2 28.2 28.2 C 17.1 17.1 17.1 28.5 28.5 28.5 Application Tooling Mates With 2018530-1 2018530-1 2018530-1 2018531-1 2018531-1 2018531-1 2007809-1 2007813-1 2007822-1 2007825-1 2007829-1 2007838-1 Note: 10 column part number 2007715-1 is pictured below. All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB plated thru holes by contacting the respective country product information center listed on the bottom of each page. B Ref. A Max. C Key Position Chart None A E B F C G D H Recommended PCB Layout Min. Board Thickness 1.0 Visit the Impact connector webpage at: www.te.com/products/impact 10 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Daughter Card Receptacle Assemblies (Continued) 3 Pair Daughter Card Receptacle Assemblies Column 10 16 Guide Part Number Left Right Unguided Left Right Unguided 2007703-1 2007704-1 2007705-1 2007709-1 2007710-1 2007711-1 A 26.6 26.6 19 38 38 30.4 Dimension B 24.2 24.2 24.2 24.2 24.2 24.2 C 17.1 17.1 17.1 28.5 28.5 28.5 Application Tooling Mates With 2018380-1 2018380-1 2018380-1 2018381-1 2018381-1 2018381-1 2007777-1 2007781-1 2007789-1 2007793-1 2007797-1 2007805-1 Note: 10 column part number 2007703-1 is pictured below. All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB plated thru holes by contacting the respective country product information center listed on the bottom of each page. B Ref. A Max. C Key Position Chart None A E B F C G D H Recommended PCB Layout Min. Board Thickness 1.0 Visit the Impact connector webpage at: www.te.com/products/impact 11 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Daughter Card Receptacle Assemblies (Continued) 2 Pair Daughter Card Receptacle Assemblies Column 10 16 Guide Part Number Left Right Unguided Left Right Unguided 2057403-1 2057404-1 2057405-1 2057409-1 2057410-1 2057411-1 A 26.6 26.6 19 38 38 30.4 Dimension B 20.1 20.1 20.1 20.1 20.1 20.1 C 17.1 17.1 17.1 28.5 28.5 28.5 Application Tooling Mates With 2018538-1 2018538-1 2018538-1 2018539-1 2018539-1 2018539-1 2057419-1 2057423-1 2057432-1 2057737-1 2057741-1 2057750-1 Note: 16 column part number 2057410-1 is pictured below. All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB plated thru holes by contacting the respective country product information center listed on the bottom of each page. B Ref. A Max. C Recommended PCB Layout Min. Board Thickness 1.6 Visit the Impact connector webpage at: www.te.com/products/impact 12 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Mezzanine Assemblies 5 Pair Mezzanine Receptacle Assemblies Column Stack Height 10 40 mm 16 28 mm Guide Part Number Left Right Unguided Left Right Unguided 2149911-1 2149912-1 2149913-1 2149392-1 2149393-1 2149394-1 A 26.6 26.6 19.0 26.6 26.6 19.0 Dimension B 24.2 24.2 24.2 24.2 24.2 24.2 C 17.1 17.1 17.1 28.5 28.5 28.5 Application Tooling Mates With 2018774-1 2018774-1 2018774-1 2018774-2 2018774-2 2018774-2 2007840-1 2007844-1 2007850-1 2007856-1 2007860-1 2007866-1 Note: 10 column part number 2149913-1 is pictured below. All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB plated thru holes by contacting the respective country product information center listed on the bottom of each page. C Recommended PCB Layout Min. Board Thickness 1.0 A Max. B Visit the Impact connector webpage at: www.te.com/products/impact 13 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Backplane Header Assemblies 6 Pair Backplane Header Assemblies Column Guide Left Right 10 Unguided Left Right 16 Unguided Wall End Part Number Right Open Left Open Left Right Dual Open Right Open Left Open Left Right Dual Open 2007875-1 2007873-1 2007879-1 2007877-1 2007885-1 2007887-1 2007886-1 2007884-1 2007891-1 2007889-1 2007895-1 2007893-1 2007901-1 2007903-1 2007902-1 2007900-1 A 26.9 25.5 26.9 25.5 20.3 20.3 21.7 18.9 38.3 36.9 38.3 36.9 31.7 31.7 33.1 30.3 Dimension B 28.9 28.9 28.9 28.9 28.9 28.9 28.9 28.9 28.9 28.9 28.9 28.9 28.9 28.9 28.9 28.9 C 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 28.5 28.5 28.5 28.5 28.5 28.5 28.5 28.5 Application Tooling Mates With 2018527-1 2018527-1 2018527-1 2018527-1 2018527-1 2018527-1 2018527-1 2018527-1 2018528-1 2018528-1 2018528-1 2018528-1 2018528-1 2018528-1 2018528-1 2018528-1 2007739-1 2007739-1 2007740-1 2007740-1 2007741-1 2007741-1 2007741-1 2007741-1 2007745-1 2007745-1 2007746-1 2007746-1 2007747-1 2007747-1 2007747-1 2007747-1 Note: 10 column part number 2007877-1 is pictured below. All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB plated thru holes by contacting the respective country product information center listed on the bottom of each page. C A Z B Right Guided Backplane Hole Pattern (Connector Side) Z Key Position Chart None A E B F C G D H Section Z-Z Visit the Impact connector webpage at: www.te.com/products/impact 14 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Backplane Header Assemblies (Continued) 5 Pair Backplane Header Assemblies Column Guide Left Right 10 Unguided Left Right 16 Unguided Wall End Part Number Right Open Left Open Left Right Dual Open Right Open Left Open Left Right Dual Open 2007843-1 2007841-1 2007847-1 2007845-1 2007853-1 2007855-1 2007854-1 2007852-1 2007853-1 2007857-1 2007863-1 2007861-1 2007869-1 2007871-1 2007870-1 2007868-1 A 26.9 25.5 26.9 25.5 20.3 20.3 21.7 18.9 38.3 36.9 38.3 36.9 31.7 31.7 33.1 30.3 Dimension B 24.8 24.8 24.8 24.8 24.8 24.8 24.8 24.8 24.8 24.8 24.8 24.8 24.8 24.8 24.8 24.8 C 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 28.5 28.5 28.5 28.5 28.5 28.5 28.5 28.5 Application Tooling Mates With 2018446-1 2018446-1 2018446-1 2018446-1 2018446-1 2018446-1 2018446-1 2018446-1 2018525-1 2018525-1 2018525-1 2018525-1 2018525-1 2018525-1 2018525-1 2018525-1 2110104-1 2110104-1 2110105-1 2110105-1 2110106-1 2110106-1 2110106-1 2110106-1 2110122-1 2110122-1 2110123-1 2110123-1 2110124-1 2110124-1 2110124-1 2110124-1 Note: 10 column part number 2007841-1 is pictured below. All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB plated thru holes by contacting the respective country product information center listed on the bottom of each page. C A Z B Left Guided Backplane Hole Pattern (Connector Side) Z Key Position Chart A None D E F A A D E F A A D E F B D E F F A C A D E F E A A D E F D E F D E F G A D D E F H Section Z-Z Visit the Impact connector webpage at: www.te.com/products/impact 15 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Backplane Header Assemblies (Continued) 4 Pair Backplane Header Assemblies Column Guide Left Right 10 Unguided Left Right 16 Unguided Wall End Part Number Right Open Left Open Left Right Dual Open Right Open Left Open Left Right Dual Open 2007811-1 2007809-1 2007815-1 2007813-1 2007821-1 2007823-1 2007822-1 2007820-1 2007827-1 2007825-1 2007831-1 2007829-1 2007837-1 2007839-1 2007838-1 2007836-1 A 26.9 25.5 26.9 25.5 20.3 20.3 21.7 18.9 38.3 36.9 38.3 36.9 31.7 31.7 33.1 30.3 Dimension B 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 C 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 28.5 28.5 28.5 28.5 28.5 28.5 28.5 28.5 Application Tooling Mates With 2018524-1 2018524-1 2018524-1 2018524-1 2018524-1 2018524-1 2018524-1 2018524-1 2018513-1 2018513-1 2018513-1 2018513-1 2018513-1 2018513-1 2018513-1 2018513-1 2007715-1 2007715-1 2007716-1 2007716-1 2007717-1 2007717-1 2007717-1 2007717-1 2007721-1 2007721-1 2007722-1 2007722-1 2007723-1 2007723-1 2007723-1 2007723-1 Note: 10 column part number 2007811-1 is pictured below. All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB plated thru holes by contacting the respective country product information center listed on the bottom of each page. C A Z B Z Left Guided Backplane Hole Pattern (Connector Side) Key Position Chart None A E B F C G D H Section Z-Z Visit the Impact connector webpage at: www.te.com/products/impact 16 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Backplane Header Assemblies (Continued) 3 Pair Backplane Header Assemblies Column Guide Wall End Part Number Right Open Left Open Left Right Dual Open Right Open Left Open Left Right Dual Open 2007779-1 2007777-1 2007783-1 2007781-1 2007789-1 2007791-1 2007790-1 2007788-1 2007795-1 2007793-1 2007799-1 2007797-1 2007805-1 2007807-1 2007806-1 2007804-1 Left Right 10 Unguided Left Right 16 Unguided A 26.9 25.5 26.9 25.5 20.3 20.3 21.7 18.9 38.3 36.9 38.3 36.9 31.7 31.7 33.1 30.3 Dimension B 16.7 16.7 16.7 16.7 16.7 16.7 16.7 16.7 16.7 16.7 16.7 16.7 16.7 16.7 16.7 16.7 C 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 28.5 28.5 28.5 28.5 28.5 28.5 28.5 28.5 Application Tooling Mates With 2018377-1 2018377-1 2018377-1 2018377-1 2018377-1 2018377-1 2018377-1 2018377-1 2018378-1 2018378-1 2018378-1 2018378-1 2018378-1 2018378-1 2018378-1 2018378-1 2007703-1 2007703-1 2007704-1 2007704-1 2007705-1 2007705-1 2007705-1 2007705-1 2007709-1 2007709-1 2007710-1 2007710-1 2007711-1 2007711-1 2007711-1 2007711-1 Note: 10 column part number 2007791-1 is pictured below. All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB plated thru holes by contacting the respective country product information center listed on the bottom of each page. C A Z B Z Unguided Backplane Hole Pattern (Connector Side) Section Z-Z Visit the Impact connector webpage at: www.te.com/products/impact 17 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Backplane Header Assemblies (Continued) 2 Pair Backplane Header Assemblies Column Guide Left Right 10 Unguided Left Right 16 Unguided Wall End Part Number Right Open Left Open Left Right Dual Open Right Open Left Open Left Right Dual Open 2057421-1 2057419-1 2057425-1 2057423-1 2057431-1 2057433-1 2057432-1 2057430-1 2057739-1 2057737-1 2057743-1 2057741-1 2057749-1 2057751-1 2057750-1 2057748-1 A 26.9 25.5 25.5 26.9 20.3 20.3 21.7 18.9 38.3 36.9 38.3 36.9 31.7 31.7 33.1 30.3 Dimension B 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 C 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 28.5 28.5 28.5 28.5 28.5 28.5 28.5 28.5 Application Tooling Mates With 2018536-1 2018536-1 2018536-1 2018536-1 2018536-1 2018536-1 2018536-1 2018536-1 2018537-1 2018537-1 2018537-1 2018537-1 2018537-1 2018537-1 2018537-1 2018537-1 2057403-1 2057403-1 2057404-1 2057404-1 2057405-1 2057405-1 2057405-1 2057405-1 2057409-1 2057409-1 2057410-1 2057410-1 2057411-1 2057411-1 2057411-1 2057411-1 Note: 10 column part number 2057419-1 is pictured below. All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB plated thru holes by contacting the respective country product information center listed on the bottom of each page. C A Z B Z Left Guided Backplane Hole Pattern (Connector Side) Section Z-Z Visit the Impact connector webpage at: www.te.com/products/impact 18 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Coplanar Header (RAM) Assemblies (Continued) 2 Pair Coplanar Header (RAM) Assemblies Column Guide Left Right 10 Unguided Left Right 16 Unguided Wall End Part Number Right Open Left Open Left Right Dual Open Right Open Left Open Left Right Dual Open 2143017-2 2143016-2 2143019-2 2143018-2 2143013-2 2143015-2 2143014-2 2143012-2 2143314-2 2143313-2 2143316-2 2143315-2 2143310-2 2143312-2 2143311-2 2143309-2 A 28 26.6 28 26.6 20.4 20.4 21.8 19 39.4 38 39.4 38 31.8 31.8 33.2 30.4 Dimension B 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 C 17.1 17.1 17.1 17.1 17.1 17.1 17.1 17.1 28.5 28.5 28.5 28.5 28.5 28.5 28.5 28.5 Application Tooling Mates With 2018779-1 2018779-1 2018779-1 2018779-1 2018779-1 2018779-1 2018779-1 2018779-1 2018779-2 2018779-2 2018779-2 2018779-2 2018779-2 2018779-2 2018779-2 2018779-2 2057404-1 2057404-1 2057403-1 2057403-1 2057405-1 2057405-1 2057405-1 2057405-1 2057410-1 2057410-1 2057409-1 2057409-1 2057411-1 2057411-1 2057411-1 2057411-1 Note: 16 column part number 2143309-1 is pictured below. A Max. C B Recommended PCB Layout Coplanar Mated Signal Paths Visit the Impact connector webpage at: www.te.com/products/Impact Left Guided Right Angle Male Mates To Right Guided Right Angle Receptacle 19 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Orthogonal Receptacle Assemblies 6 Pair Orthogonal Receptacle Assemblies Column 10 12 Guide Part Number Left Right Unguided Left Right Unguided 2132718-1 2132719-1 2132720-1 2132721-1 2132722-1 2132723-1 A 28.35 28.35 20.25 32.4 32.4 24.3 Dimension B 37.3 37.3 37.3 37.3 37.3 37.3 C 18.1 18.1 18.1 22.15 22.15 22.15 Application Tooling Mates With 2018773-1 2018773-1 2018773-1 2018773-2 2018773-2 2018773-2 2143249-1 2143251-1 2143255-1 2143265-1 2143267-1 2143271-1 Note: 12 column part number 2132723-1 is pictured below. All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB plated thru holes by contacting the respective country product information center listed on the bottom of each page. B Ref. A Max. C Recommended PCB Layout Min. Board Thickness 1.0 Visit the Impact connector webpage at: www.te.com/products/impact 20 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Orthogonal Receptacle Assemblies (Continued) 5 Pair Orthogonal Receptacle Assemblies Column 8 10 12 Guide Part Number Left Right Unguided Left Right Unguided Left Right Unguided 2132690-1 2132691-1 2132692-1 2132693-1 2132694-1 2132695-1 2132696-1 2132697-1 2132698-1 A 24.3 24.3 16.2 28.35 28.35 20.25 32.4 32.4 24.3 Dimension B 32.3 32.3 32.3 32.3 32.3 32.3 32.3 32.3 32.3 C 14.05 14.05 14.05 18.1 18.1 18.1 22.15 22.15 22.15 Application Tooling Mates With 2018772-1 2018772-1 2018772-1 2018772-2 2018772-2 2018772-2 2018772-3 2018772-3 2018772-3 2143545-1 2143547-1 2143550-1 2143557-1 2143559-1 2143562-1 2143569-1 2143571-1 2143574-1 Note: 10 column part number 2132693-1 is pictured below. All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB plated thru holes by contacting the respective country product information center listed on the bottom of each page. B A Max. C Recommended PCB Layout Visit the Impact connector webpage at: www.te.com/products/impact 21 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Orthogonal Receptacle Assemblies (Continued) 4 Pair Orthogonal Receptacle Assemblies Column 6 8 10 Guide Part Number Left Right Unguided Left Right Unguided Left Right Unguided 2132461-1 2132462-1 2132463-1 2132464-1 2132465-1 2132466-1 2132467-1 2132468-1 2132469-1 A 20.25 20.25 12.15 24.3 24.3 16.2 28.35 28.35 20.25 Dimension B 28.2 28.2 28.2 28.2 28.2 28.2 28.2 28.2 28.2 C 10 10 10 14.05 14.05 14.05 18.1 18.1 18.1 Application Tooling Mates With 2018771-1 2018771-1 2018771-1 2018771-2 2018771-2 2018771-2 2018771-3 2018771-3 2018771-3 2132593-1 2132595-1 2132599-1 2132609-1 2132611-1 2132615-1 2132597-1 2132599-1 2132631-1 Note: 8 column part number 2132464-1 is pictured below. All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB plated thru holes by contacting the respective country product information center listed on the bottom of each page. B Ref. A Max. C Recommended PCB Layout Min. Board Thickness 1.0 Visit the Impact connector webpage at: www.te.com/products/impact 22 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Orthogonal Receptacle Assemblies (Continued) 3 Pair Orthogonal Receptacle Assemblies Column 6 8 Guide Part Number Left Right Unguided Left Right Unguided 2132422-1 2132423-1 2132424-1 2132425-1 2132426-1 2132427-1 A 20.25 20.25 12.15 24.3 24.3 16.2 Dimension B C 24.1 10 24.1 10 24.1 10 24.1 14.05 24.1 14.05 24.1 14.05 Application Tooling Mates With 2018770-1 2018770-1 2018770-1 2018770-2 2018770-2 2018770-2 2132561-1 2132563-1 2132567-1 2132577-1 2132579-1 2132583-1 Note: 6 column part number 2132424-1 is pictured below. All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB plated thru holes by contacting the respective country product information center listed on the bottom of each page. B A Max. C Recommended PCB Layout Visit the Impact connector webpage at: www.te.com/products/impact 23 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Orthogonal Header Assemblies 6 Pair Orthogonal Header Assemblies Column Guide Left Right 10 Unguided Left Right 12 Unguided All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB plated thru holes by contacting the respective country product information center listed on the bottom of each page. Wall End Part Number Right Open Left Open Left Right Dual Open Right Open Left Open Left Right Dual Open 2143250-1 2143249-1 2143252-1 2143251-1 2143254-1 2143256-1 2143255-1 2143253-1 2143266-1 2143265-1 2143268-1 2143267-1 2143270-1 2143272-1 2143271-1 2143269-1 A 28.4 27 28.4 27 21.5 21.5 22.9 20.1 32.4 31 32.4 31 25.55 25.55 26.95 24.15 Dimension B C 28.9 18.5 28.9 18.5 28.9 18.5 28.9 18.5 28.9 18.5 28.9 18.5 28.9 18.5 28.9 18.5 28.9 22.55 28.9 22.55 28.9 22.55 28.9 22.55 28.9 22.55 28.9 22.55 28.9 22.55 28.9 22.55 Application Tooling Mates With 2018773-1 2018773-1 2018773-1 2018773-1 2018773-1 2018773-1 2018773-1 2018773-1 2018773-2 2018773-2 2018773-2 2018773-2 2018773-2 2018773-2 2018773-2 2018773-2 2132718-1 2132718-1 2132719-1 2132719-1 2132720-1 2132720-1 2132720-1 2132720-1 2132721-1 2132721-1 2132722-1 2132722-1 2132723-1 2132723-1 2132723-1 2132723-1 Note: 12 column part number 2143266-1 is pictured below. C A Z B Z Left Guided Backplane Hole Pattern (Connector Side) Section Z-Z Visit the Impact connector webpage at: www.te.com/products/impact 24 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Orthogonal Header Assemblies (Continued) 5 Pair Orthogonal Header Assemblies Column Guide Left Right 8 Unguided Left Right 10 Unguided Note: 10 column part number 2143558-1 is pictured below. All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB plated thru holes by contacting the respective country product information center listed on the bottom of each page. Left Right 12 Unguided Wall End Part Number Right Open Left Open Left Right Dual Open Right Open Left Open Left Right Dual Open Right Open Left Open Left Right Dual Open 2143546-1 2143545-1 2143548-1 2143547-1 2143621-1 2143622-1 2143550-1 2143549-1 2143558-1 2143557-1 2143560-1 2143559-1 2143625-1 2143626-1 2143562-1 2143561-1 2143570-1 2143569-1 2143572-1 2143571-1 2143629-1 2143630-1 2143574-1 2143573-1 A 24.3 22.9 24.3 22.9 17.45 17.45 18.85 16.05 28.4 27 28.4 27 21.5 21.5 22.9 20.1 32.4 31 32.4 31 25.55 25.55 26.95 24.15 Dimension B C 24.8 14.45 24.8 14.45 24.8 14.45 24.8 14.45 24.8 14.45 24.8 14.45 24.8 14.45 24.8 14.45 24.8 18.5 24.8 18.5 24.8 18.5 24.8 18.5 24.8 18.5 24.8 18.5 24.8 18.5 24.8 18.5 24.8 22.55 24.8 22.55 24.8 22.55 24.8 22.55 24.8 22.55 24.8 22.55 24.8 22.55 24.8 22.55 Application Tooling Mates With 2018772-1 2018772-1 2018772-1 2018772-1 2018772-1 2018772-1 2018772-1 2018772-1 2018772-2 2018772-2 2018772-2 2018772-2 2018772-2 2018772-2 2018772-2 2018772-2 2018772-3 2018772-3 2018772-3 2018772-3 2018772-3 2018772-3 2018772-3 2018772-3 2132690-1 2132690-1 2132691-1 2132691-1 2132692-1 2132692-1 2132692-1 2132692-1 2132693-1 2132693-1 2132694-1 2132694-1 2132695-1 2132695-1 2132695-1 2132695-1 2132696-1 2132696-1 2132697-1 2132697-1 2132698-1 2132698-1 2132698-1 2132698-1 C Visit the Impact connector webpage at: www.te.com/products/Impact A Z B Left Guided Backplane Hole Pattern (Connector Side) Z Section Z-Z 25 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Orthogonal Header Assemblies (Continued) 4 Pair Orthogonal Header Assemblies Column Guide Left Right 6 Unguided Left Right 8 Unguided Note: 8 column part number 2132610-1 is pictured below. All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB plated thru holes by contacting the respective country product information center listed on the bottom of each page. Left Right 10 Unguided Wall End Part Number Right Open Left Open Left Right Dual Open Right Open Left Open Left Right Dual Open Right Open Left Open Left Right Dual Open 2132594-1 2132593-1 2132596-1 2132595-1 2132598-1 2132600-1 2132599-1 2132597-1 2132610-1 2132609-1 2132612-1 2132611-1 2132614-1 2132616-1 2132615-1 2132613-1 2132626-1 2132625-1 2132628-1 2132627-1 2132630-1 2132632-1 2132631-1 2132629-1 A 20.3 18.9 20.3 18.9 13.4 13.4 14.8 12 24.3 22.9 24.3 22.9 17.45 17.45 18.85 16.05 28.4 27 28.4 27 21.5 21.5 22.9 20.1 Dimension B C 20.8 10.4 20.8 10.4 20.8 10.4 20.8 10.4 20.8 10.4 20.8 10.4 20.8 10.4 20.8 10.4 20.8 14.45 20.8 14.45 20.8 14.45 20.8 14.45 20.8 14.45 20.8 14.45 20.8 14.45 20.8 14.45 20.8 18.5 20.8 18.5 20.8 18.5 20.8 18.5 20.8 18.5 20.8 18.5 20.8 18.5 20.8 18.5 Application Tooling Mates With 2018771-1 2018771-1 2018771-1 2018771-1 2018771-1 2018771-1 2018771-1 2018771-1 2018771-2 2018771-2 2018771-2 2018771-2 2018771-2 2018771-2 2018771-2 2018771-2 2018771-3 2018771-3 2018771-3 2018771-3 2018771-3 2018771-3 2018771-3 2018771-3 2132461-1 2132461-1 2132462-1 2132462-1 2132463-1 2132463-1 2132463-1 2132463-1 2132464-1 2132464-1 2132465-1 2132465-1 2132466-1 2132466-1 2132466-1 2132466-1 2132467-1 2132467-1 2132468-1 2132468-1 2132469-1 2132469-1 2132469-1 2132469-1 C A Z B Z Left Guided Backplane Hole Pattern (Connector Side) Section Z-Z Visit the Impact connector webpage at: www.te.com/products/impact 26 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Orthogonal Header Assemblies (Continued) 3 Pair Orthogonal Header Assemblies Column Guide Left Right 6 Unguided Left Right 8 Unguided Wall End Part Number Right Open Left Open Left Right Dual Open Right Open Left Open Left Right Dual Open 2132562-1 2132561-1 2132564-1 2132563-1 2132566-1 2132568-1 2132567-1 2132565-1 2132578-1 2132577-1 2132580-1 2132579-1 2132582-1 2132584-1 2132583-1 2132581-1 A 20.3 18.9 20.3 18.9 13.4 13.4 14.8 12 24.3 22.9 24.3 22.9 17.45 17.45 18.85 16.05 Dimension B C 16.7 10.4 16.7 10.4 16.7 10.4 16.7 10.4 16.7 10.4 16.7 10.4 16.7 10.4 16.7 10.4 16.7 14.45 16.7 14.45 16.7 14.45 16.7 14.45 16.7 14.45 16.7 14.45 16.7 14.45 16.7 14.45 Application Tooling Mates With 2018770-1 2018770-1 2018770-1 2018770-1 2018770-1 2018770-1 2018770-1 2018770-1 2018770-2 2018770-2 2018770-2 2018770-2 2018770-2 2018770-2 2018770-2 2018770-2 2132422-1 2132422-1 2132423-1 2132423-1 2132424-1 2132424-1 2132424-1 2132424-1 2132425-1 2132425-1 2132426-1 2132426-1 2132427-1 2132427-1 2132427-1 2132427-1 Note: 8 column part number 2132580-1 is pictured below. All the numbers provided are for 0.39mm PCB plated thru hole use. Part numbers are available for 0.46mm PCB plated thru holes by contacting the respective country product information center listed on the bottom of each page. C A Z B Z Left Guided Backplane Hole Pattern (Connector Side) Section Z-Z Visit the Impact connector webpage at: www.te.com/products/impact 27 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Part Number Index Note: This index lists all cataloged parts by base no. only. Complete part nos. (with prefixes and/or suffixes) are shown on the page(s) indicated. Part No. 2007703 2007704 2007705 2007709 2007710 2007711 2007715 2007716 2007717 2007721 2007722 2007723 2007739 2007740 2007741 2007745 2007746 2007747 2007777 2007779 2007781 2007783 2007786 2007788 2007789 2007790 2007791 2007793 2007795 2007797 2007799 2007804 2007805 2007806 2007807 2007809 2007811 2007813 2007815 2007818 2007820 2007821 2007822 2007823 2007825 2007827 2007829 2007831 2007836 2007837 2007838 2007839 2007840 2007841 2007843 2007844 2007845 2007847 2007850 2007852 2007853 2007854 Page 11, 17 11, 17 4, 11, 17 11, 17 11, 17 11, 17 10, 16 10, 16 4, 10, 16 10, 16 10, 16 10, 16 8, 14 8, 14 4, 8, 14 8, 14 8, 14 8, 14 11, 17 17 11, 17 17 4 17 11, 17 17 17 11, 17 17 11, 17 17 17 11, 17 17 17 10, 16 16 10, 16 16 4 16 16 10, 16 16 10, 16 16 10, 16 16 16 16 10, 16 16 13 9, 15 15 13 9, 15 15 4, 13 15 15 9, 15 Part No. 2007855 2007856 2007857 2007860 2007861 2007863 2007866 2007868 2007869 2007870 2007871 2007873 2007875 2007877 2007879 2007882 2007884 2007885 2007886 2007887 2007889 2007891 2007893 2007895 2007900 2007901 2007902 2007903 2057403 2057404 2057405 2057409 2057410 2057411 2057419 2057421 2057423 2057425 2057428 2057430 2057431 2057432 2057433 2057737 2057739 2057741 2057743 2057748 2057749 2057750 2057751 2110104 2110105 2110106 2110122 2110123 2110124 2132422 2132423 2132424 2132425 2132426 Page 15 13 9, 15 13 9, 15 15 13 15 15 9, 15 15 8, 14 14 8, 14 14 4 14 14 8, 14 14 8, 14 14 8, 14 14 14 14 8, 14 14 12, 18, 19 12, 18, 19 4, 12, 18, 19 12, 18, 19 12, 18, 19 12, 18, 19 12, 18 18 12, 18 18 4 18 18 12, 18 18 12, 18 18 12, 18 18 18 18 12, 18 18 9, 15 9, 15 4, 9, 15 9, 15 9, 15 9, 15 23, 27 23, 27 23, 27 23, 27 23, 27 Part No. 2132427 2132461 2132462 2132463 2132464 2132465 2132466 2132467 2132468 2132469 2132561 2132562 2132563 2132564 2132565 2132566 2132567 2132568 2132577 2132578 2132579 2132580 2132581 2132582 2132583 2132584 2132593 2132594 2132595 2132596 2132597 2132598 2132599 2132600 2132609 2132610 2132611 2132612 2132613 2132614 2132615 2132616 2132625 2132626 2132627 2132628 2132629 2132630 2132631 2132632 2132690 2132691 2132692 2132693 2132694 2132695 2132696 2132697 2132698 2132718 2132719 2132720 Page 23, 27 22, 26 22, 26 22, 26 22, 26 22, 26 22, 26 22, 26 22, 26 22, 26 23, 27 27 23, 27 27 27 27 23, 27 27 23, 27 27 23, 27 27 27 27 23, 27 27 22, 26 26 22, 26 26 22, 26 26 22, 26 26 22, 26 26 22, 26 26 26 26 22, 26 26 26 26 26 26 26 26 22, 26 26 21, 25 21, 25 21, 25 21, 25 21, 25 21, 25 21, 25 21, 25 21, 25 20, 24 20, 24 20, 24 28 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Impact Backplane Connector System Part Number Index (Continued) Part No. 2132721 2132722 2132723 2143012 2143013 2143014 2143015 2143016 2143017 2143018 2143019 2143249 2143250 2143251 2143252 2143253 2143254 2143255 2143256 2143265 2143266 2143267 Page 20, 24 20, 24 20, 24 19 19 19 19 19 19 19 19 20, 24 24 20, 24 24 24 24 20, 24 24 20, 24 24 20, 24 Part No. 2143268 2143269 2143270 2143271 2143272 2143309 2143310 2143311 2143312 2143313 2143314 2143315 2143316 2143545 2143546 2143547 2143548 2143549 2143550 2143557 2143558 2143559 Page 24 24 24 20, 24 24 19 19 19 19 19 19 19 19 21, 25 25 21, 25 25 25 21, 25 21, 25 25 21, 25 Part No. 2143560 2143561 2143562 2143569 2143570 2143571 2143572 2143573 2143574 2143621 2143622 2143625 2143626 2143629 2143630 2149392 2149393 2149394 2149911 2149912 2149913 Page 25 25 21, 25 21, 25 25 21, 25 25 25 21, 25 25 25 25 25 25 25 13 13 13 13 13 13 Part No. 2018527 2018528 2018530 2018531 2018532 2018534 2018535 2018536 2018537 Page 14 14 10 10 9 8 8 18 18 Part No. 2018538 2018539 2018770 2018771 2018772 2018773 2018774 2018779 Page 12 12 23, 27 22, 26 21, 25 20, 24 13 19 Tooling Part Number Index Part No. 2018377 2018378 2018380 2018381 2018446 2018448 2018513 2018524 2018525 Page 17 17 11 11 15 9 16 16 15 29 Catalog 7-1773458-1 Revised 8-19 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico/C. Am.: +52 (0) 55-1106-0800 Latin/S. Am.: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 te.com (c) 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. 7-1773458-1 LUG PDF 04/2011 updated 08/2019 TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Other logos, product and/or company names might be trademarks of their respective owners.