AC Line EMI Suppression and RC Networks PME271M Series Metallized Impregnated Paper, Class X2, 275 VAC Overview Applications The PME271M Series is constructed of multilayer metallized paper encapsulated and impregnated in self-extinguishing material meeting the requirements of UL 94 V-0. Typical applications include worldwide use in electromagnetic interference suppression in all X2 and across-the-line applications. Benefits * * * * * * * * * * Approvals: ENEC, UL, cUL Rated voltage: 275 VAC 50/60 Hz Capacitance range: 0.001 - 0.6 F Lead spacing: 10.2 - 25.4 mm Capacitance tolerance: M = 20% (for C 0.1 F), K = 10% (for C > 0.1 F) Climatic category: 40/110/56, IEC 60068-1 Tape and reel in accordance with IEC 60286-2 RoHS Compliant and lead-free terminations Operating temperature range of -40C to +110C 100% screening factory test at 2,150 VDC * The highest possible safety regarding active and passive flammability * Excellent self-healing properties ensure long life even when subjected to frequent over voltages * Good resistance to ionization due to impregnated dielectric * High dV/dt capability * The impregnated paper ensures excellent stability and outstanding reliability properties, especially in applications with continuous operation Legacy Part Number System PME271 M (B) 610(0) M R30 Series Rated Voltage (VAC) Lead Spacing (mm) Capacitance Code (pF) Capacitance Tolerance Lead and Packaging Code X2, Metallized Paper M = 275 Blank = Standard A = 10.2 B = 15.2 D = 22.5 Digits 2 - 4(3) indicates the first three digits of the capacitance value. First digit indicates the total number of digits in the capacitance value. M = 20% (for C 0.1 F) K = 10% (for C > 0.1 F) See Ordering Options Table New KEMET Part Number System P 276 Q E 104 M 275 A Capacitor Class Series Lead Spacing (mm) Size Code Capacitance Code (pF) Capacitance Tolerance Rated Voltage (VAC) Lead and Packaging Code See Dimension Table First two digits indicate the two most significant digits of the capacitance value in picofarads. The third digit is the number of following zeros. M = 20% (for C 0.1 F) K = 10% (for C > 0.1 F) 275 = 275 See Ordering Options Table P = Paper X2, Metallized Paper H = 10.2 Q = 15.2 C = 20.3 S = 22.5 E = 25.4 One world. One KEMET (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3011_PME271M_X2_275 * 2/20/2014 1 Film Capacitors AC Line EMI Suppression and RC Networks - PME271M Series Metallized Impregnated Paper, Class X2, 275 VAC Ordering Options Table Lead Spacing Nominal (mm) Lead Length (mm) KEMET Lead and Packaging Code Legacy Lead and Packaging Code 6 +0/-1 30 +5/-0 H0= 18.5 +/-0.5 C A L R06 R30 R19T0 Tape & Reel (Large Reel) H0= 18.5 +/-0.5 P R19T1 Ammo Pack H0= 16.5 +/-0.5 LAF3 R30XA 6 +0/-1 30 +5/-0 H0= 18.5 +/-0.5 C A L R06 R30 R19T0 H0= 18.5 +/-0.5 P R19T1 6 +0/-1 30 +5/-0 H0= 18.5 +/-0.5 C A L R06 R30 R19T0 H0= 18.5 +/-0.5 P R19T1 6 +0/-1 30 +5/-0 C A R06 R30 Type of Leads and Packaging Standard Lead and Packaging Options 10.2 Bulk (Bag) - Short Leads Bulk (Bag) - Max Length Leads Tape & Reel (Standard Reel) Other Lead and Packaging Options Native 10.2 formed to 7.5 Standard Lead and Packaging Options 15.2 Bulk (Bag) - Short Leads Bulk (Bag) - Max Length Leads Tape & Reel (Standard Reel) Other Lead and Packaging Options Tape & Reel (Standard Reel) Standard Lead and Packaging Options 20.3 Bulk (Tray) - Short Leads Bulk (Bag) - Max Length Leads Tape & Reel (Standard Reel) Other Lead and Packaging Options Tape & Reel (Large Reel) 25.4 Standard Lead and Packaging Options Bulk (Tray) - Short Leads Bulk (Bag) - Max Length Leads (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3011_PME271M_X2_275 * 2/20/2014 2 Film Capacitors AC Line EMI Suppression and RC Networks - PME271M Series Metallized Impregnated Paper, Class X2, 275 VAC Dimensions - Millimeters B L H d LL p Size Code HE HH HL QE QL QP QS CE CJ CP SJ SP SU EG EJ EL p B H L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 10.2 10.2 10.2 15.2 15.2 15.2 15.2 20.3 20.3 20.3 22.5 22.5 22.5 25.4 25.4 25.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 +/-0.4 3.9 4.1 5.1 5.2 6 7.8 8.5 7.6 9 11.3 8 10 12 10.5 12.1 15.3 Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum 7.5 8.2 10.5 10.5 12.5 13.5 14.3 14 15 16.5 17 19 22 17.3 19 22 Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum 13.5 13.5 13.5 18.5 18.5 18.5 18.5 24 24 24 27 27 27 30.5 30.5 30.5 Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1 1 1 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 +/-0.05 Note: See Ordering Options Table for lead length (LL) options. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3011_PME271M_X2_275 * 2/20/2014 3 Film Capacitors AC Line EMI Suppression and RC Networks - PME271M Series Metallized Impregnated Paper, Class X2, 275 VAC Performance Characteristics Rated Voltage Capacitance Range Capacitance Tolerance Temperature Range Climatic Category Approvals Dissipation Factor Test Voltage Between Terminals 275 VAC 50/60 Hz 0.001 - 0.6 F 20%, 10%, 5% on request -40C to +110C 40/110/56 ENEC, UL, cUL Maximum Values at +23C 1 kHz 1.3% The 100% screening factory test is carried out at 2,150 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. It is not permitted to repeat this test as there is a risk to damage the capacitor. KEMET is not liable in such case for any failures. Minimum Values Between Terminals Insulation Resistance In DC Applications C 0.33 F 12,000 M C > 0.33 F 4,000 M * F Recommended voltage 630 VDC Environmental Test Data Test IEC Publication Procedure Endurance EN/IEC 60384-14 Vibration IEC 60068-2-6 Test Fc 3 directions at 2 hours each 10 - 55 Hz at 0.75 mm or 98 m/s2 Bump IEC 60068-2-29 Test Eb 1,000 bumps at 390 m/s2 Change of Temperature IEC 60068-2-14 Test Na Upper and lower rated temperature 5 cycles Active Flammability IEC 60384-14 VR + 20 surge pulses at 2.5 kV (pulse every 5 seconds) Passive Flammability IEC 60384-14 IEC 60384-1, IEC 60695-11-5 Needle-flame test Damp Heat Steady State IEC 60068-2-78 Test Cab 1.25 x VR VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1 second, 1,000 hours at upper rated temperature +40C and 93% RH, 56 days (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3011_PME271M_X2_275 * 2/20/2014 4 Film Capacitors AC Line EMI Suppression and RC Networks - PME271M Series Metallized Impregnated Paper, Class X2, 275 VAC Approvals Mark Specification File Number EN/IEC 60384-14 SE/0140-16C UL 1414 (up to 1 F, 85C, 250 VAC) E73869 CSA - C22.2 No. 1 (up to 1 F, 85C, 250 VAC) E73869 UL 1283 (310 VAC) E100117 Environmental Compliance All KEMET EMI capacitors are RoHS Compliant. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3011_PME271M_X2_275 * 2/20/2014 5 Film Capacitors AC Line EMI Suppression and RC Networks - PME271M Series Metallized Impregnated Paper, Class X2, 275 VAC Table 1 - Ratings & Part Number Reference Capacitance Maximum Dimensions in mm Lead Value (F) Spacing (p) B H L fo (MHz) dV/dt (V/s) New KEMET Part Number Legacy Part Number 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.1 0.1 0.15 0.22 0.1 0.15 0.22 0.27 0.33 0.27 0.33 0.47 0.6 3.9 3.9 3.9 4.1 5.1 5.1 5.2 5.2 5.2 6 6 6 7.8 8.5 7.6 9 11.3 8 8 10 12 12 10.5 12.1 15.3 15.3 7.5 7.5 7.5 8.2 10.5 10.5 10.5 10.5 10.5 12.5 12.5 12.5 13.5 14.3 14 15 16.5 17 17 19 22 22 17.3 19 22 22 13.5 13.5 13.5 13.5 13.5 13.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 24 24 24 27 27 27 27 27 30.5 30.5 30.5 30.5 10.2 10.2 10.2 10.2 10.2 10.2 15.2 15.2 15.2 15.2 15.2 15.2 15.2 15.2 20.3 20.3 20.3 22.5 22.5 22.5 22.5 22.5 25.4 25.4 25.4 25.4 53 44 37 30 24 21 19 16 13 10 8.4 7 5.6 4.3 4.1 3.4 2.7 3.9 3.3 2.6 2.3 2.1 2.4 2.1 1.8 1.6 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 600 600 600 600 600 600 400 400 400 400 400 400 P276HE102M275(1) P276HE152M275(1) P276HE222M275(1) P276HH332M275(1) P276HL472M275(1) P276HL682M275(1) P276QE682M275(1) P276QE103M275(1) P276QE153M275(1) P276QL223M275(1) P276QL333M275(1) P276QL473M275(1) P276QP683M275(1) P276QS104M275(1) P276CE104M275(1) P276CJ154K275(1) P276CP224K275(1) P276SJ104M275(1) P276SJ154K275(1) P276SP224K275(1) P276SU274K275(1) P276SU334K275(1) P276EG274K275(1) P276EJ334K275(1) P276EL474K275(1) P276EL604K275(1) PME271M410M(1) PME271M415M(1) PME271M422M(1) PME271M433M(1) PME271M447M(1) PME271MA4680M(1) PME271M468M(1) PME271M510M(1) PME271M515M(1) PME271M522M(1) PME271M533M(1) PME271M547M(1) PME271M568M(1) PME271MB6100M(1) PME271M610M(1) PME271M615K(1) PME271M622K(1) PME271MD6100M(1) PME271MD6150K(1) PME271MD6220K(1) PME271MD6270K(1) PME271MD6330K(1) PME271M627K(1) PME271M633K(1) PME271M647K(1) PME271M660K(1) Capacitance Value (F) B (mm) H (mm) L (mm) Lead Spacing (p) fo (MHz) dV/dt (V/s) New KEMET Part Number Legacy Part Number (1) Insert ordering code for lead type and packaging. See Ordering Options Table for available options. Soldering Process The implementation of the RoHS Directive has required the use of SnAuCu (SAC) or SnCu alloys as primary solder. These alloys require a higher liquidus temperature (217C - 221C) as compared to SnPb eutectic alloy (183C). Due to the higher pre-heat and wave temperatures, the heat stress to components has increased considerably. Polypropylene capacitors are especially sensitive to soldering temperature due to the relatively low melting point of polypropylene material (160C - 170C). As a result, wave soldering can be destructive, especially to mechanically small polypropylene capacitors with lead spacings of 5 -10 mm. For more information, please refer to KEMET's Recommended Soldering Profiles or contact a KEMET representative. IEC Publication 61760-1 Edition 2 may also be consulted for general guidelines. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3011_PME271M_X2_275 * 2/20/2014 6 Film Capacitors AC Line EMI Suppression and RC Networks - PME271M Series Metallized Impregnated Paper, Class X2, 275 VAC Marking * * * * * * * * * * * KEMET's logo Series Capacitance Capacitance tolerance Rated voltage Capacitor class Approval marks Manufacturing date code IEC climatic category Passive flammability class Manufacturing plant Packaging Quantities Lead Spacing (mm) Thickness (mm) Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel o 360 mm Large Reel o 500 mm Ammo Formed 10.2 3.9 4.1 5.1 7.5 8.2 10.5 13.5 13.5 13.5 2000 2000 1600 1000 1000 800 700 600 600 1400 800 780 630 15.2 5.5 6.5 7.5 8.5 5.2 5.5 6 7.3 7.8 8.5 12.5 12.5 14.5 16 10.5 11 12.5 13 13.5 14.3 18 18 18 18 18.5 18.5 18.5 18.5 18.5 18.5 1000 600 600 400 1000 1000 600 600 600 500 500 400 400 250 500 500 400 400 400 300 600 400 400 400 600 500 400 400 400 350 7.6 8.4 9 11.3 14 14 15 16.5 24 24 24 24 1500 1200 1500 1000 250 200 200 150 250 250 250 180 22.5 8 10 12 17 19 22 27 27 27 1200 1000 800 200 150 100 200 180 25.4 10.6 10.5 12.1 15.3 16.1 17.3 19 22 30.5 30.5 30.5 30.5 1000 1000 800 600 150 100 100 75 20.3 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com 1200 800 500 500 400 350 F3011_PME271M_X2_275 * 2/20/2014 7 Film Capacitors AC Line EMI Suppression and RC Networks - PME271M Series Metallized Impregnated Paper, Class X2, 275 VAC Lead Taping & Packaging (IEC 60286-2) Lead Spacing 20.3 - 22.5 mm Lead Spacing 10.2 - 15.2 mm 0 0 Formed Leads from 10.2 to 7.5 mm 0 Taping Specification Dimensions in mm Lead spacing +6/-0.1 F Carrier tape width +/-0.5 W Formed 7.5 18 Hold-down tape width +/-0.3 W0 Position of sprocket hole +/-0.5 Distance between tapes Maximum Standard IEC 60286-2 10.2 15.2 20.3 22.5 F 18 18 18 18 18+1/-0.5 9 12 12 12 12 W1 9 9 9 9 9 9+0.75/-0.5 W2 3 3 3 3 3 3 Sprocket hole diameter +/-0.2 D0 4 4 4 4 4 4 Feed hole lead spacing +/-0.3 P0(1) 12.7(4) 12.7 12.7 12.7 12.7 12.7 Distance lead - feed hole +/-0.7 P1 3.75 7.6 5.1 8.9 5.3 P1 Deviation tape - plane Maximum p 1.3 1.3 1.3 1.3 1.3 1.3 Lateral deviation Maximum h 2 2 2 2 2 2 Total thickness +/-0.2 t 0.7 0.7 0.7 0.7 Sprocket hole/cap body Nominal H0(2) 18+2/-0 18+2/-0 18+2/-0 18+2/-0 18.5+/-0.5 18+2/-0 Sprocket hole/top of cap body Maximum H1(3) 35 35 35 35 58 58MAX (1) Maximum cumulative feed hole error, 1 mm per 20 parts. (2) 16.5 mm available on request. 0.9 MAX 0.9MAX (3) Depending on case size. (4) 15 mm available on request. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3011_PME271M_X2_275 * 2/20/2014 8 Film Capacitors AC Line EMI Suppression and RC Networks - PME271M Series Metallized Impregnated Paper, Class X2, 275 VAC Lead Taping & Packaging (IEC 60286-2) cont'd Ammo Specifications Dimensions (mm) Series R4x, R4x+R, R7x, RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx H W T 360 340 59 330 330 50 H T Reel Specifications W Dimensions (mm) Series R4x, R4x+R, R7x, RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx D H W 355 500 30 25 55 (Max) 360 500 30 46 (Max) D Manufacturing Date Code (IEC-60062) H W Y = Year, Z = Month Year 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Code M N P R S T U V W X A B C D E F H J K L M Month January February March April May June July August September October November December Code 1 2 3 4 5 6 7 8 9 O N D (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3011_PME271M_X2_275 * 2/20/2014 9 Film Capacitors AC Line EMI Suppression and RC Networks - PME271M Series Metallized Impregnated Paper, Class X2, 275 VAC KEMET Corporation World Headquarters Europe Asia Southern Europe Paris, France Tel: 33-1-4646-1006 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Sasso Marconi, Italy Tel: 39-051-939111 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Corporate Offices Fort Lauderdale, FL Tel: 954-766-2800 Kamen, Germany Tel: 49-2307-438110 North America Northern Europe Bishop's Stortford, United Kingdom Tel: 44-1279-460122 2835 KEMET Way Simpsonville, SC 29681 Southeast Lake Mary, FL Tel: 407-855-8886 Espoo, Finland Tel: 358-9-5406-5000 Northeast Wilmington, MA Tel: 978-658-1663 Beijing, China Tel: 86-10-5829-1711 Shanghai, China Tel: 86-21-6447-0707 Taipei, Taiwan Tel: 886-2-27528585 Southeast Asia Singapore Tel: 65-6586-1900 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 Central Novi, MI Tel: 248-306-9353 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3011_PME271M_X2_275 * 2/20/2014 10 Film Capacitors AC Line EMI Suppression and RC Networks - PME271M Series Metallized Impregnated Paper, Class X2, 275 VAC Disclaimer All product specifications, statements, information and data (collectively, the "Information") in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation's ("KEMET") knowledge of typical operating conditions for such applications, but are not intended to constitute - and KEMET specifically disclaims - any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F3011_PME271M_X2_275 * 2/20/2014 11