© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3011_PME271M_X2_275 • 2/20/2014 1
One world. One KEMET
Benets
• Approvals: ENEC, UL, cUL
• Rated voltage: 275 VAC 50/60 Hz
• Capacitance range: 0.001 - 0.6 µF
• Lead spacing: 10.2 – 25.4 mm
• Capacitancetolerance:M=±20%(forC≤0.1µF),K=±10%
(for C > 0.1 µF)
• Climatic category: 40/110/56, IEC 60068–1
• Tape and reel in accordance with IEC 60286–2
• RoHS Compliant and lead-free terminations
• Operatingtemperaturerangeof-40˚Cto+110˚C
• 100% screening factory test at 2,150 VDC
• The highest possible safety regarding
activeandpassiveammability
• Excellent self-healing properties
ensure long life even when subjected
to frequent over voltages
• Good resistance to ionization due to
impregnated dielectric
• High dV/dt capability
• The impregnated paper ensures
excellent stability and outstanding
reliability properties, especially in
applications with continuous operation
Overview
The PME271M Series is constructed of multilayer metallized
paper encapsulated and impregnated in self-extinguishing
material meeting the requirements of UL 94 V–0.
Applications
Typical applications include worldwide use in electromagnetic
interference suppression in all X2 and across-the-line
applications.
AC Line EMI Suppression and RC Networks
PME271M Series Metallized Impregnated Paper,
Class X2, 275 VAC
Legacy Part Number System
PME271 M(B) 610(0) MR30
Series Rated Voltage (VAC) Lead Spacing (mm) Capacitance Code (pF) Capacitance
Tolerance
Lead and
Packaging Code
X2, Metallized Paper M = 275 Blank = Standard
A = 10.2
B = 15.2
D = 22.5
Digits2–4(3)indicatestherst
three digits of the capacitance
value. First digit indicates the
total number of digits in the
capacitance value.
M = ±20%
(forC≤0.1µF)
K = ±10%
(for C > 0.1 µF)
See Ordering
Options Table
New KEMET Part Number System
P276 Q E 104 M275 A
Capacitor
Class Series Lead Spacing (mm) Size Code Capacitance Code (pF) Capacitance
Tolerance
Rated Voltage
(VAC)
Lead and
Packaging Code
P = Paper X2, Metallized
Paper
H = 10.2
Q = 15.2
C = 20.3
S = 22.5
E = 25.4
See Dimension
Table
First two digits indicate the
twomostsignicantdigits
of the capacitance value in
picofarads. The third digit
is the number of following
zeros.
M = ±20%
(forC≤0.1µF)
K = ±10%
(for C > 0.1 µF)
275 = 275 See Ordering
Options Table
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3011_PME271M_X2_275 • 2/20/2014 2
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271M Series Metallized Impregnated Paper, Class X2, 275 VAC
Ordering Options Table
Lead
Spacing
Nominal
(mm)
Type of Leads and Packaging Lead Length
(mm)
KEMET
Lead and
Packaging
Code
Legacy
Lead and
Packaging
Code
10.2
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
6+0/-1
C
R06
Bulk (Bag) – Max Length Leads
30+5/-0
A
R30
Tape & Reel (Standard Reel)
H0=18.5+/-0.5
L
R19T0
Other Lead and Packaging Options
Tape & Reel (Large Reel)
H0=18.5+/-0.5
P
R19T1
Native 10.2
formed to 7.5
Ammo Pack H0=16.5+/-0.5 LAF3 R30XA
15.2
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
6+0/-1
C
R06
Bulk (Bag) – Max Length Leads
30+5/-0
A
R30
Tape & Reel (Standard Reel)
H0=18.5+/-0.5
L
R19T0
Other Lead and Packaging Options
Tape & Reel (Standard Reel)
H0=18.5+/-0.5
P
R19T1
20.3
Standard Lead and Packaging Options
Bulk (Tray) – Short Leads
6+0/-1
C
R06
Bulk (Bag) – Max Length Leads
30+5/-0
A
R30
Tape & Reel (Standard Reel)
H0=18.5+/-0.5
L
R19T0
Other Lead and Packaging Options
Tape & Reel (Large Reel)
H0=18.5+/-0.5
P
R19T1
25.4
Standard Lead and Packaging Options
Bulk (Tray) – Short Leads
6+0/-1
C
R06
Bulk (Bag) – Max Length Leads
30+5/-0
A
R30
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3011_PME271M_X2_275 • 2/20/2014 3
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271M Series Metallized Impregnated Paper, Class X2, 275 VAC
Dimensions – Millimeters
L
B
d
p
LL
Size Code
p
B
H
L
d
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
HE
10.2
+/-0.4
3.9
Maximum
7.5
Maximum
13.5
Maximum
0.6
+/-0.05
HH
10.2
+/-0.4
4.1
Maximum
8.2
Maximum
13.5
Maximum
0.6
+/-0.05
HL
10.2
+/-0.4
5.1
Maximum
10.5
Maximum
13.5
Maximum
0.6
+/-0.05
QE
15.2
+/-0.4
5.2
Maximum
10.5
Maximum
18.5
Maximum
0.8
+/-0.05
QL
15.2
+/-0.4
6
Maximum
12.5
Maximum
18.5
Maximum
0.8
+/-0.05
QP
15.2
+/-0.4
7.8
Maximum
13.5
Maximum
18.5
Maximum
0.8
+/-0.05
QS
15.2
+/-0.4
8.5
Maximum
14.3
Maximum
18.5
Maximum
0.8
+/-0.05
CE
20.3
+/-0.4
7.6
Maximum
14
Maximum
24
Maximum
0.8
+/-0.05
CJ
20.3
+/-0.4
9
Maximum
15
Maximum
24
Maximum
0.8
+/-0.05
CP
20.3
+/-0.4
11.3
Maximum
16.5
Maximum
24
Maximum
0.8
+/-0.05
SJ
22.5
+/-0.4
8
Maximum
17
Maximum
27
Maximum
0.8
+/-0.05
SP
22.5
+/-0.4
10
Maximum
19
Maximum
27
Maximum
0.8
+/-0.05
SU
22.5
+/-0.4
12
Maximum
22
Maximum
27
Maximum
0.8
+/-0.05
EG
25.4
+/-0.4
10.5
Maximum
17.3
Maximum
30.5
Maximum
1
+/-0.05
EJ
25.4
+/-0.4
12.1
Maximum
19
Maximum
30.5
Maximum
1
+/-0.05
EL
25.4
+/-0.4
15.3
Maximum
22
Maximum
30.5
Maximum
1
+/-0.05
Note: See Ordering Options Table for lead length (LL) options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3011_PME271M_X2_275 • 2/20/2014 4
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271M Series Metallized Impregnated Paper, Class X2, 275 VAC
Performance Characteristics
Rated Voltage 275 VAC 50/60 Hz
Capacitance Range 0.001 – 0.6 µF
Capacitance Tolerance ±20%, ±10%, ±5% on request
Temperature Range -40ºCto+110°C
Climatic Category 40/110/56
Approvals ENEC, UL, cUL
Dissipation Factor
MaximumValuesat+23°C
1 kHz 1.3%
Test Voltage Between Terminals
The 100% screening factory test is carried out at 2,150 VDC. The
voltage level is selected to meet the requirements in applicable
equipment standards. All electrical characteristics are checked
after the test. It is not permitted to repeat this test as there is a risk
to damage the capacitor. KEMET is not liable in such case for any
failures.
Insulation Resistance
Minimum Values Between Terminals
C≤0.33µF ≥12,000MΩ
C > 0.33 µF ≥4,000MΩ•µF
In DC Applications Recommendedvoltage≤630VDC
Environmental Test Data
Test
IEC Publication
Procedure
Endurance EN/IEC 60384–14
1.25 x V
R
VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1
second, 1,000 hours at upper rated temperature
Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2
Bump IEC 60068–2–29 Test Eb 1,000 bumps at 390 m/s2
Change of Temperature IEC 60068–2–14 Test Na Upper and lower rated temperature 5 cycles
Active Flammability IEC 60384–14 VR+20surgepulsesat2.5kV(pulseevery5seconds)
Passive Flammability IEC 60384–14 IEC60384–1,IEC60695–11–5Needle-ametest
Damp Heat Steady State IEC 60068–2–78 Test Cab +40°Cand93%RH,56days
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3011_PME271M_X2_275 • 2/20/2014 5
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271M Series Metallized Impregnated Paper, Class X2, 275 VAC
Approvals
Mark Specication File Number
EN/IEC 60384–14 SE/0140–16C
UL1414(upto1μF,85°C,250VAC) E73869
CSA – C22.2 No. 1
(upto1μF,85°C,250VAC)
E73869
UL 1283 (310 VAC) E100117
Environmental Compliance
All KEMET EMI capacitors are RoHS Compliant.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3011_PME271M_X2_275 • 2/20/2014 6
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271M Series Metallized Impregnated Paper, Class X2, 275 VAC
Table 1 – Ratings & Part Number Reference
Capacitance
Value (µF)
Maximum Dimensions in mm Lead
Spacing (p)
fo
(MHz)
dV/dt
(V/µs)
New KEMET Part
Number
Legacy Part
Number
B H L
0.001 3.9 7.5 13.5 10.2 53 1200 P276HE102M275(1) PME271M410M(1)
0.0015 3.9 7.5 13.5 10.2 44 1200 P276HE152M275(1) PME271M415M(1)
0.0022 3.9 7.5 13.5 10.2 37 1200 P276HE222M275(1) PME271M422M(1)
0.0033 4.1 8.2 13.5 10.2 30 1200 P276HH332M275(1) PME271M433M(1)
0.0047 5.1 10.5 13.5 10.2 24 1200 P276HL472M275(1) PME271M447M(1)
0.0068 5.1 10.5 13.5 10.2 21 1200 P276HL682M275(1) PME271MA4680M(1)
0.0068 5.2 10.5 18.5 15.2 19 1200 P276QE682M275(1) PME271M468M(1)
0.010 5.2 10.5 18.5 15.2 16 1200 P276QE103M275(1) PME271M510M(1)
0.015 5.2 10.5 18.5 15.2 13 1200 P276QE153M275(1) PME271M515M(1)
0.022 612.5 18.5 15.2 10 1200 P276QL223M275(1) PME271M522M(1)
0.033 612.5 18.5 15.2 8.4 1200 P276QL333M275(1) PME271M533M(1)
0.047 612.5 18.5 15.2 71200 P276QL473M275(1) PME271M547M(1)
0.068 7.8 13.5 18.5 15.2 5.6 1200 P276QP683M275(1) PME271M568M(1)
0.1 8.5 14.3 18.5 15.2 4.3 1200 P276QS104M275(1) PME271MB6100M(1)
0.1 7.6 14 24 20.3 4.1 600 P276CE104M275(1) PME271M610M(1)
0.15 915 24 20.3 3.4 600 P276CJ154K275(1) PME271M615K(1)
0.22 11.3 16.5 24 20.3 2.7 600 P276CP224K275(1) PME271M622K(1)
0.1 817 27 22.5 3.9 600 P276SJ104M275(1) PME271MD6100M(1)
0.15 817 27 22.5 3.3 600 P276SJ154K275(1) PME271MD6150K(1)
0.22 10 19 27 22.5 2.6 600 P276SP224K275(1) PME271MD6220K(1)
0.27 12 22 27 22.5 2.3 400 P276SU274K275(1) PME271MD6270K(1)
0.33 12 22 27 22.5 2.1 400 P276SU334K275(1) PME271MD6330K(1)
0.27 10.5 17.3 30.5 25.4 2.4 400 P276EG274K275(1) PME271M627K(1)
0.33 12.1 19 30.5 25.4 2.1 400 P276EJ334K275(1) PME271M633K(1)
0.47 15.3 22 30.5 25.4 1.8 400 P276EL474K275(1) PME271M647K(1)
0.6 15.3 22 30.5 25.4 1.6 400 P276EL604K275(1) PME271M660K(1)
Capacitance
Value (µF) B (mm) H (mm) L (mm) Lead
Spacing (p) fo (MHz) dV/dt
(V/µs)
New KEMET
Part Number Legacy Part Number
(1) Insert ordering code for lead type and packaging. See Ordering Options Table for available options.
Soldering Process
The implementation of the RoHS Directive has required the use
of SnAuCu (SAC) or SnCu alloys as primary solder. These alloys
require a higher liquidus temperature (217ºC – 221ºC) as compared
to SnPb eutectic alloy (183ºC). Due to the higher pre-heat and
wave temperatures, the heat stress to components has increased
considerably. Polypropylene capacitors are especially sensitive
to soldering temperature due to the relatively low melting point of
polypropylene material (160ºC – 170ºC). As a result, wave soldering
can be destructive, especially to mechanically small polypropylene
capacitors with lead spacings of 5 –10 mm. For more information,
pleaserefertoKEMET'sRecommendedSolderingProlesorcontact
a KEMET representative. IEC Publication 61760–1 Edition 2 may
also be consulted for general guidelines.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3011_PME271M_X2_275 • 2/20/2014 7
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271M Series Metallized Impregnated Paper, Class X2, 275 VAC
Marking
• KEMET’s logo
• Series
• Capacitance
• Capacitance tolerance
• Rated voltage
• Capacitor class
• Approval marks
• Manufacturing date code
• IEC climatic category
• Passiveammabilityclass
• Manufacturing plant
Packaging Quantities
Lead Spacing
(mm)
Thickness
(mm)
Height
(mm)
Length
(mm)
Bulk
Short Leads
Bulk
Long Leads
Standard Reel
ø 360 mm
Large Reel
ø 500 mm
Ammo
Formed
10.2
3.9
7.5
13.5
2000
1000
700
1400
800
4.1
8.2
13.5
2000
1000
600
780
5.1
10.5
13.5
1600
800
600
1200
630
15.2
5.5
12.5
18
1000
500
600
6.5
12.5
18
600
400
400
7.5
14.5
18
600
400
400
8.5
16
18
400
250
400
5.2
10.5
18.5
1000
500
600
5.5
11
18.5
1000
500
500
6
12.5
18.5
600
400
400
7.3
13
18.5
600
400
400
800
7.8
13.5
18.5
600
400
400
8.5
14.3
18.5
500
300
350
20.3
7.6
14
24
1500
250
250
500
8.4
14
24
1200
200
250
500
9
15
24
1500
200
250
11.3
16.5
24
1000
150
180
400
22.5
8
17
27
1200
200
10
19
27
1000
150
200
12
22
27
800
100
180
350
25.4
10.6
16.1
30.5
1000
150
10.5
17.3
30.5
1000
100
12.1
19
30.5
800
100
15.3
22
30.5
600
75
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3011_PME271M_X2_275 • 2/20/2014 8
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271M Series Metallized Impregnated Paper, Class X2, 275 VAC
Lead Taping & Packaging (IEC 60286–2)
Taping Speci cation
Dimensions in mm
Standard IEC 60286–2
Lead spacing +6/-0.1 F
Formed
7.5
10.2 15.2 20.3 22.5 F
Carrier tape width +/-0.5 W18 18 18 18 18 18+1/-0.5
Hold-down tape width +/-0.3 W
0
912 12 12 12
Position of sprocket hole +/-0.5 W
1
99999 9+0.75/-0.5
Distance between tapes Maximum W
2
33333 3
Sprocket hole diameter +/-0.2 D
0
44444 4
Feed hole lead spacing +/-0.3 P
0
(1) 12.7(4) 12.7 12.7 12.7 12.7 12.7
Distance lead – feed hole +/-0.7 P
1
3.75 7.6 5.1 8.9 5.3 P1
Deviation tape – plane Maximum ∆p 1.3 1.3 1.3 1.3 1.3 1.3
Lateral deviation Maximum ∆h 22222 2
Total thickness +/-0.2 t0.7 0.7 0.7 0.7 0.9MAX 0.9MAX
Sprocket hole/cap body Nominal H
0
(2) 18+2/-0 18+2/-0 18+2/-0 18+2/-0 18.5+/-0.5 18+2/-0
Sprocket hole/top of cap body Maximum H
1
(3) 35 35 35 35 58 58MAX
(1) Maximum cumulative feed hole error, 1 mm per 20 parts.
(2) 16.5 mm available on request.
(3) Depending on case size.
(4) 15 mm available on request.
Lead Spacing 10.2 – 15.2 mm
Lead Spacing 20.3 – 22.5 mm
Formed Leads from 10.2 to 7.5 mm
0
0
0
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3011_PME271M_X2_275 • 2/20/2014 9
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271M Series Metallized Impregnated Paper, Class X2, 275 VAC
H
T
W
Lead Taping & Packaging (IEC 60286–2) cont'd
Ammo Speci cations
Series Dimensions (mm)
H
W
T
R4x,R4x+R,R7x,RSB
360 340 59
F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx
330
330
50
Reel Speci cations
Series
Dimensions (mm)
D
H
W
R4x,R4x+R,R7x,RSB
355
500
30
25 55 (Max)
F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx
360
500
30 46 (Max)
Manufacturing Date Code (IEC–60062)
Y = Year, Z = Month
Year
Code
Month
Code
2000
M
January
1
2001
N
February
2
2002
P
March
3
2003
R
April
4
2004
S
May
5
2005
T
June
6
2006
U
July
7
2007
V
August
8
2008
W
September
9
2009
X
October
O
2010
A
November
N
2011
B
December
D
2012
C
2013
D
2014
E
2015
F
2016
H
2017
J
2018
K
2019
L
2020
M
D
W
H
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3011_PME271M_X2_275 • 2/20/2014 10
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271M Series Metallized Impregnated Paper, Class X2, 275 VAC
KEMET Corporation
World Headquarters
2835 KEMET Way
Simpsonville, SC 29681
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Corporate Of ces
Fort Lauderdale, FL
Tel: 954-766-2800
North America
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
Central
Novi, MI
Tel: 248-306-9353
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Europe
Southern Europe
Paris, France
Tel: 33-1-4646-1006
Sasso Marconi, Italy
Tel: 39-051-939111
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Kamen, Germany
Tel: 49-2307-438110
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-460122
Espoo, Finland
Tel: 358-9-5406-5000
Asia
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Shenzhen, China
Tel: 86-755-2518-1306
Beijing, China
Tel: 86-10-5829-1711
Shanghai, China
Tel: 86-21-6447-0707
Taipei, Taiwan
Tel: 886-2-27528585
Southeast Asia
Singapore
Tel: 65-6586-1900
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3011_PME271M_X2_275 • 2/20/2014 11
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271M Series Metallized Impregnated Paper, Class X2, 275 VAC
Disclaimer
Allproductspecications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuchapplications,butare
notintendedtoconstitute–andKEMETspecicallydisclaims–anywarrantyconcerningsuitabilityforaspeciccustomerapplicationoruse.TheInformationisintendedforuseonly
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.