C3-Series Specifications
3.20L x 2.50W x 0.80H (mm)
PDI C3-Series is a hermecally sealed quartz crystal in a seam-welded ceramic
SMT package. This crystal, designed to meet your most demanding specicaon,
is available in standard or custom frequencies and/or with customized parameters.
PDI provides quick-turn sampling for your proto-typing needs, mass producon
capability, and compeve pricing.
REV: NA SIZE: A CAGE: A 1 of 3
*(X) for standard or assigned for customizaon.
FREQUENCY MODE TOLERANCE FREQUENCY OPERATING LOAD PACKAGE
12000X – 99999X = F = Fundamental @ 25°C STABILITY TEMPERATURE 08-99 = pF R = Tape & Reel
12.000MHz - 3 = 3rd Overtone A = ±10 B = ±25 A = 0 to +70°C SE = Series
99.999MHz - B = ±25 C = ±50 B = -20 to +70°C
C10000 – C15000 = C = ±50 D = ±100 D = -40 to +85°C
100.00MHz - S = Special S = Special S = Special
150.00MHz -
ex) C3—25000X—F—B—C—B—18—R—X*
Parameter Mode
Fundamental 3rd Overtone Units
Frequency Range*1 12.000000 to 60.000000 60.000000 to 150.000000 MHz
Frequency Tolerance @ +25°C Per Option ppm
Temperature Range*1 Operating Per Option °C
Storage - 55 to +125 °C
Frequency Stability*1 Over Operating Temperature Per Option ppm
Equivalent Series Resistance
(Maximum)
12.000000 to 16.000000 MHz 100 N/A
Ω
16.000000 to 20.000000 MHz 80 N/A
20.000000 to 24.000000 MHz 60 N/A
24.000000 to 60.000000 MHz 40 N/A
60.000000 to 150.000000 MHz N/A 100
Drive Level (Typical) 10 uW
Shunt Capacitance (Maximum) 5.0 pF
Load Capacitance (Typical) Per Option pF
Aging (Maximum) Per Year ±5.0 ppm
Seal Method Seam Weld
Insulation Resistance 500MΩ Minimum @100Vdc ±15V
*1 - Not all Frequency/Stability/Temperature combinations are available.
FREQUENCY MODE FREQUENCY OPERATING LOAD PACKAGE
12000X – 67500X = F = Fundamental STABILITY TEMPERATURE 08-99 = pF R = Tape & Reel
12.000MHz - B = ±25 A = 0 to +70°C SE = Series
67.500MHz - C = ±50 B = -20 to +70°C
D = ±100 D = -40 to +85°C
S = Special S = Special
ex) C3—25000X—F—C—B—18—R—X*
Legacy Part Numbering Conguraon
See below for legacy part numbering conguraon for parts designed prior to 02-01-2014, which are sll available
PIN CONNECTION
1Crystal
2Ground/Cover
3Crystal
4Ground/Cover
C3-Series 3.20 x 2.50 x 0.80 (mm)
Traceability Code
Recommended Land Pattern
.098 ±.006
[2.50 ±.15]
(Top View)
.126 ±.006
[3.20 ±.15]
Pin 1
Bottom View:
Top View:
P FKA
D/C
1 2
4 3
12
3
4
.031 Max
[.80 Max]
.047
[1.20]
.028
[.70]
.040
[1.00]
.040
[1.00]
.035
[.90]
.035
[.90]
.083
[2.10]
.067
[1.70]
.051
[1.30]
.051
[1.30]
REV: NA SIZE: A CAGE: A 2 of 3
PACKAGE DIMENSIONS
Decimal XXX = ± .008, XX = ± .02 Metric [XXX = ± .20], [XX = ± .50]
NOTES:
Terminals are Au.
Other opons are available, please consult factory.
All product is supplied RoHS and REACH compliant.
Product can be supplied on Tape and Reel, on reels of 1,000 units.
Specicaons subject to change without noce, last updated 4/1/13.
C3-Series 3.20 x 2.50 x 0.80 (mm)
1. Material: Black Conductive Polystyrene or equivalent.
2. 10 Sprocket Hole pitch cumulative tolerance of ±.008
3. Camber in compliance with EIA 481
4. Empty pockets: Trailing end (Minimum) 200 mm. and Leading end (Minimum) 400 mm.
5. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole.
.012±.002
[0.30±.05]
Section A-A
Ø7.09
[Ø180.00]
3.15
[80.00]
.319
[8.10]
120°
.315 ±.012
[8.00 ±.30]
.207
[5.25]
.157 Typ.
[4.00 Typ.]
.157 Typ.
[4.00 Typ.]
.069
[1.75]
.079
[2.00]
Ø.059
[Ø1.50] A
A
REV: NA SIZE: A CAGE: A 3 of 3