HDR-EC26LFDTG2-SLG+ - HONDA CONNECTORS INC

371

For the latest information–www.gcelectronics.com

STATIC DISSIPATIVE TWEEZERS

TOOLS

All quantities are single; BU’s are packages of 10 Unless otherwise noted.

Tools

Static Dissipative Tweezers

12-9511

12-9514

12-9517

12-9520

12-9523

12-9526

12-9529

Static Dissipative, Non-metallic, Acid Resistant Plastic Tweezers with Straight, Flat, Rounded Tip .

Static Dissipative, Non-metallic, Acid Resistant Plastic Tweezers with Curved, Rounded Tip.

Static Dissipative, Non-metallic, Acid Resistant Plastic Tweezers with Very Fine, Straight Tip.

Static Dissipative, Non-metallic, Acid Resistant Plastic Tweezers with Very Fine, Angular Tip.

Static Dissipative, Non-metallic, Acid Resistant Plastic Tweezers with Very Fine, Curved Tip.

Static Dissipative, Non-metallic, Acid Resistant Plastic Tweezers with Straight, Flat Tip.

Static Dissipative, Non-metallic, Acid Resistant Plastic Tweezers with Straight, Broad Flat Tip.

4-1/2

Length

(Inches)

Description

Bulk

Part No.

Retail

Part No.

Fig. 1 Fig. 2

Fig. 3 Fig. 4

Fig. 5 Fig. 6

Tweezers (Full View)

Fig. 7

1

2

3

4

5

6

7

Figure

No.

Tools1 6-13 22 06 12 1:08 PM Page 371

TEST AND MEASUREMENT TOOLS

TOOLS

All quantities are single; BU’s are packages of 10 Unless otherwise noted.

372 Phone (815) 316-9080 • Fax (815) 316-9081

Tools

Test and Measurement Tools

12-5705

12-5706

12-105

12-1640

12-1642

12-1650

12-1655

12-1656

5101

5120

5128

12-1716

Tone Test Set

Stationman Probe

Continuity Tester

Sub-miniature I.C. Test Clips

Miniature I.C. Test Clips

“Jumper” Wire Test Leads

Heavy Duty Test Leads

Test Light

High-Voltage Testing Screwdriver

Automotive Electrical Tester

6” Stainless Steel Rule

1000 Hz or 500/1000 Alt. Tone, Checks for Shorts, Locates Broken Cables in Walls

Quickly and Easily Locates the Proper Cable Pair Containing the Tone Signal

42” Alligator Clip for Ground Connections

Clips to Wires/Posts Up to .030” Diameter, 5/32” Travel, Rated: 500V AC/DC

Clips to Wires Up to #16 Wire, 1/8” Travel, Rated: 1500V AC 1 Minute

27 AWG, 2 Each, 15” Long Thin Leads with Mini Clips, 10 Jumpers

21 AWG, Heavy Duty Leads, 1 Each, 22” Long Leads with Standard Size Clips, 5 Jumpers

Phone Tips to Banana Plugs 35” Leads 25 Ga. (20 x 38)

Tests Both AC & DC Circuits (80V AC to 500V AC or DC)

Screwdriver/Tester Checks AC Voltage from 100 to 500V

Tests “Hot” Leads in Vehicle Electrical Systems, Equipped w/18” Alligator Clip/Banana Plug Ends

15/32” Wide, Graduations in 32nds and 64ths, Decimal Equivalents on Back

Features

Description

Bulk

Part No.

Retail

Part No.

1

2

3

4

5

6

7

8

9

10

11

Figure

No.

Fig. 1 Fig. 2 Fig. 3

Fig. 4 Fig. 5

Fig. 6 Fig. 8

Fig. 9

Fig. 7

Fig. 10

Fig. 11

Tools1 6-13 22 06 12 1:09 PM Page 372

373

For the latest information–www.gcelectronics.com

ALLIGATOR CLIPS

TOOLS

All quantities are single; BU’s are packages of 10 Unless otherwise noted.

Tools

Alligator Clips

33-075-BU

33-076-BU

33-077-BU

33-078-BU

33-079-BU

33-081-BU

33-082-BU

5999-00-880-5534

5999-00-235-0214

5999-00-060-8996

Alligator Clip with Red Vinyl Sleeve

Alligator Clip with Black Vinyl Sleeve

Miniature Alligator Clip

Alligator Clip

Red Insulator Fits all Standard Sizes

Black Insulator Fits all Standard Sizes

Description

N.S.N.

Part No.

Bulk

Part No.

Retail

Part No.

5 Amps

Current

Rating

Nickel-plated Steel

Molded Vinyl

Body

Make-up

Solder/Screw

Solder

Solder/Banana Plug

Screw/Banana Plug

Connection

Type

5/16 (7.938)

1/2 (12.700)

3/8 (9.525)

Not Applicable

Jaw Opening

(Inches (mm))

Fig. 1 Fig. 2

Fig. 3 Fig. 4

Fig. 5

1

2

3

4

5

Figure

No.

Tools1 6-13 22 06 12 1:09 PM Page 373

Fig. 7

Fig. 8

TECHNICIAN TOOLS

TOOLS

All quantities are single; BU’s are packages of 10 Unless otherwise noted.

374 Phone (815) 316-9080 • Fax (815) 316-9081

Tools

Technician Tools

12-007

12-008

12-280

12-284

12-2260

12-2264

12-2266

12-2270

7946

7947

7948

7950

7976

7977

7978

7979

7992

7993

7994

7995

13 Piece Precision Knife Set

Technician’s Knife with 6 Blades

Miniature Scissors

Lab Scissors

Dental Probes

Electronic Assembly Tweezers

Tweezer Kit

Forceps

Precision Quality Tweezers

3 Knife Handles, Common Blades, Magnetic Blade Holder

Knife Handle, Common Blades, Storage Tray

Extra Fine, 4-1/2” Overall

Medium Weight, 5-1/2” Overall

5-1/2” Probe–Straight

5-1/2” Probe–Hooked

5-1/2” Probe–Curved

Set of 3 Probes

6-1/2” Long, Self-closing, Blunt Points, Serrated

6-1/2” Long, Slide Lock, Smooth Points

4-1/2” Long, Fine Points

Set of All 3 Tweezers

5” Long, Straight Jaw

6” Long, Straight Jaw

5” Long, Curved Jaw

6” Long, Curved Jaw

4-5/8” Long, Beveled Points

4-1/8” Long, Fine Points

4-1/4” Long, Extra Fine Points

4-1/2” Long, Curved Points

Features

Description

Retail

Part No.

Fig. 1 Fig. 2 Fig. 3

Fig. 4 Fig. 5

Fig. 9 Fig. 10

Fig. 6

Fig. 12 Fig. 13 Fig. 14

Fig. 11

1

2

3

4

5

6

7

8

9

10

11

12

13

14

Figure

No.

5120-00-784-2890

5120-00-920-8420

N.S.N.

Part No.

Tools1 6-13 22 06 12 1:09 PM Page 374

Fig. 5* Fig. 6 Fig. 7

375

For the latest information–www.gcelectronics.com

SOLDER & SOLDER BRAID

TOOLS

All quantities are single; BU’s are packages of 10 Unless otherwise noted.

Tools

Solder

6033

6039

6044

6034

6040

6045

6035

6037

6056

6059

9132

H3-391

9134

H3-390

12-5380

13-9610

13-9611

13-9612

13-9620

13-9621

13-9622

13-9636

13-9644

13-9630

13-9631

13-9631-32

12-5380-BU

60/40 Rosin Core Solder

Low-melt Solder

Silver Bearing Solder

Fine Line Solder-32 Tubes of Solder

Fine Line Solder-Carded

Standard Solder-32 Tubes of Solder

Standard Solder-Carded

Mini Solder

SnAg3Cu0.5Ni0.06Ge0.01 Solder

Sn96.5Ag3Cu0.5 Solder

SnAg3Cu0.5Ni0.06Ge0.01 Solder-Carded

SnAg3Cu0.5Ni0.06Ge0.01 Solder-32 Tubes of Solder

60/40

63/37

60/38/2

60/40

Lead Free

Tin/Lead

Percentage

Description

Bulk

Part No.

Retail

Part No.

20

16

14

20

16

14

20

16

24

20

16

14

20

16

14

23

24

16

Gauge

.032”

.047”

.062”

.032”

.047”

.062”

.032”

.050”

.020”

.032”

.047”

.062”

.032”

.047”

.062”

.023”

.020”

.047”

Diameter

1/2 lb.

1 lb.

1/2 lb.

1 lb.

1/2 lb.

1 lb.

1/2 lb.

1 lb.

1/2 lb.

1/5 lb.

.26 oz

tube

Spool

Size

12

6.5

25

18

7

Length

(Feet) Color

Fig. 1 Fig. 2 Fig. 3 Fig. 4*

1

2

3

4*

5*

Fig.

No.

Solder Braid

12-5001

12-5025

12-5050

12-5075

12-5100

12-5125

12-6025

12-6050

12-6075

12-6100

12-6125

1 Reel of GC Solder and 1 Reel of GC Braid

GC Braid

60/40

Tin/Lead

Percentage

Description

Bulk

Part No.

Retail

Part No. Gauge

.031”/.075”

.025”

.050”

.075”

.100”

.125”

.025”

.050”

.075”

.100”

.125”

Width

Solder/Braid

Spool

Size Length

(Feet) Color

Figure

No.

Silver

Gold

Green

Blue

Brown

Silver

Gold

Green

Blue

Brown

20

5

25

6

7

12-5001-BU

12-5025-BU

12-5050-BU

12-5075-BU

12-5100-BU

12-5125-BU

12-6025-BU

12-6050-BU

12-6075-BU

12-6100-BU

12-6125-BU

(*=Requires less than 60W iron)

Tools1 6-13 22 06 12 1:09 PM Page 375

Fig. 7 Fig. 8 Fig. 9

Fig. 17 Fig. 18

SOLDER TOOLS

TOOLS

All quantities are single; BU’s are packages of 10 Unless otherwise noted.

376 Phone (815) 316-9080 • Fax (815) 316-9081

Tools

Solder Tools

12-031

12-055

12-056

12-5003

Soldering Kit (Not Recommended for Lead Free Solder)

30 W Soldering Iron (Not Recommended for Lead Free Solder)

Replacement Tip for 12-055 & 12-031

Tip Tinner, 1 Ounce Can

30 W, Solder Aid Tool & Brush End

Light Weight Iron, 117V AC, Comes with Replacement Tip

Sn 63/Pb 37, Helps Prolong Solder Iron Tip

Features

Description

Bulk

Part No.

Retail

Part No.

Fig. 1 Fig. 2 Fig. 3

1

2

3

Figure

No.

PORTABLE BUTANE SOLDERING IRONS AND TIPS

Portable Butane Solder Irons

PSI-100

P-2-C

12-133

Portable Butane Solder Iron PSI-100

Portable Butane Solder Iron P-2

3 fl. oz. Aerosol Butane Gas for Solder Irons

Portable Gas Soldering Tool, Adjustable Temperature

Variety of Tips Available, 90 Minutes of Operation

Features

Description

Bulk

Part No.

Retail

Part No.

Fig. 4 Fig. 5 Fig. 6

4

5

6

Figure

No.

Ten Professional-Quality, Iron-plated Tips for PSI-100

PSI1

PSI2

PSI3

PSI4

PSI5

PSI6

PSI7

PSI8

PSI9

PSI10

Single Flat

Double Flat

Hot Blower Tip

Hot Knife Tip

1/32” (1.0 mm)

3/32” (2.4 mm)

1/8” (3.2 mm)

3/16” (4.8 mm)

1/32” (1.0 mm)

3/32” (2.4 mm)

1/8” (3.2 mm)

3/16” (4.8 mm)

Size

Description

Bulk

Part No.

Retail

Part No.

Up to 450ºC/850ºF

Temperature

Range

Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16

7

8

9

10

11

12

13

14

15

16

Figure

No.

Professional-Quality, Iron-plated Tips for P-2-C

PPT-1

PPT-6

Single Flat

Double Flat

1/32” (1.0 mm)

3/32” (2.4 mm)

Size

Description

Bulk

Part No.

Retail

Part No.

17

18

Figure

No.

377

For the latest information–www.gcelectronics.com

PORTABLE BUTANE SOLDERING IRONS AND TIPS (Cont.)

TOOLS

All quantities are single; BU’s are packages of 10 Unless otherwise noted.

Tools

Replacement Tips (for P-1K Kit)

T-1

T-2

T-3

T-4

T-5

T-7

Solder Tip

Blow Torch Tip

Hot Knife Tip

1/32” (1.0 mm)

3/32” (2.4 mm)

1/8” (3.2 mm)

3/16” (4.8 mm)

Size

Description

Bulk

Part No.

Retail

Part No.

1260ºC/2300ºF

Temperature

Range

Portable Butane Solder Tool Kit

P-2K-C Model P-2K Portable Butane

Soldering Tool Kit

Portable Butane P-2 Soldering Tool, 3/32” (2.3 mm) Standard Soldering Tip, Hot Blow Tip (Heat Tip),

Blow-torch Tip, Double Flat Tip, Tip Cleaning Sponge, Wire Hot-iron Stand, Plastic Storage Case

Kit Includes:

Description

Bulk

Part No.

Retail

Part No.

Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7

1

2

3

4

5

6

Figure

No.

7

Figure

No.

SOLDER PRODUCTION TOOLS

Solder Production Tools

9065

9069

9073

9074

9075

9475

4 Piece Solder Aid Kit

6-1/2” Long Reamer and Scraper Tip (Plastic)

6-1/2” Long Brush and Forked Tip (Plastic)

6-1/2” Long Brush and Scraper Kit (Plastic)

6-1/2” Long Straight Reamer and Forked Tip (Plastic)

5-3/4” Long Straight Reamer and Forked Tip (Wood)

Description

Bulk

Part No.

Retail

Part No.

Fig. 8

Fig. 9

Fig. 10

Fig. 11

Fig. 12

8

9

10

11

12

13

Figure

No.

Fig. 13

SOLDER PRODUCTION TOOLS (Cont.)

TOOLS

All quantities are single; BU’s are packages of 10 Unless otherwise noted.

378 Phone (815) 316-9080 • Fax (815) 316-9081

Tools

Solder Production Tools

9088

9093

9086

12-2105

12-2106

12-2107

12-2157

12-2160

12-2161

H3-388

9077-1

12-4125

12-4126

12-4127

12-4116

12-4128

12-4140

12-4612

8” Long Heavy-Duty Brush and Forked Tip (Plastic)

8” Long Angle Reamer and Forked Tip (Plastic)

Straight Reamer and Forked Tip

Anti-static Solder Removal Tool

Replacement “O” Rings for 12-2105

Replacement Tips for 12-2105

Solder Popper®

Replacement Tips for 12-2157

Replacement “O” Ring Seal for 12-2157

Heat Sink Clamp

Anti-static 8-28 Pin IC Inserter Tool

Anti-static 8-28 Pin IC Extractor Tool

Anti-static 8-28 Pin IC Extractor/Inserter Kit

Anti-static Insertion Tool (14-16 Pin)

Anti-static Insertion Tool (24-28 Pin)

Anti-static Insertion Tool (36-40 Pin)

28-40 Pin Grounded Dip IC Extractor

Description

Retail

Part No.

Fig. 1

Fig. 3

Fig. 5-A

Fig. 2

Fig. 4-A

Fig. 6

Fig. 10

Fig. 8 Fig. 11

Fig. 9

Fig. 7

1

2

3

4-A

4-B

4-C

5-A

5-B

5-C

6

7

8

9

8 & 9

10

11

Figure

No.

Fig. 4-B Fig. 4-C

Fig. 5-C

Fig. 5-B

5120-00-611-7136

3439-00-800-7989

N.S.N.

Part No.

379

For the latest information–www.gcelectronics.com

ESD/STATIC PROTECTION

TOOLS

All quantities are single; BU’s are packages of 10 Unless otherwise noted.

Tools

ESD/Static Protection

20-8004

12-8012

12-8013

12-8020

12-8010

12-8011

12-8055

12-8056

12-8057

12-8058

12-8050

12-8051

12-8024

12-8026

12-8028

12-8029

12-8034

12-8030

12-6960

12-8042

12-8043

12-8044

12-8045

12-8046

12-8047

12-8060

12-8062

1

3

4

5

6

7

8

9

10

11

12

Medium to Large Wrist Strap

GC Professional Adjustable Wrist Strap Kit

Wrist Strap Only

Coil Cord Only

Adjustable Economy Wrist Strap Kit

Wrist Strap Only

Combination Wrist Strap/Footwear Tester

Combination Tester/Adapter

Stand and Baseplate

Footplate and Cord

Touch Type on Demand Wrist Strap Tester

AC Adapter

Ground Cords for Floormats with 10 mm Studs

2 Pack, 10 mm Snap Sockets

2 Pack, 3/8” Push and Clinch 10 mm Snap Stud

2 Pack, 10 mm Snap Socket Adapter

Dual Bench Mount

Anti-Static Wrist Strap

Dissipative Workstation Kit

ESD Two Layer Workstation Mat (24” x 40’)

Two Layer Workstation Kit (18” x 24”)

ESD Three Layer Workstation Mat (24” x 40’)

Three Layer Workstation Kit (18” x 24”)

Anti-fatigue Dissipative Floor Mat (3’ x 60’)

Touch Type Wrist Strap Tester

Anti-static Packaging Tape

10’ Coil Cord, Banana Plug/Alligator Clip, 1 meg Ohm Resistance for Safety

10’ Coil Cord, 4 mm Snap Stud and Alligator Clip

for 12-8012

6’ Coil Cord, 4 mm Snap Stud and Alligator Clip

for 12-8010

Indicates Low-pass or High Results

for 12-8055

Tests the Entire Circuit

for 12-8050

10’ Yellow Striped Green Ground Cord, Terminated w/#10 (.200”) Ring Terminal

Custom Tailor Installation (No Workstation)

for 12-8026

for12-8026

for Use with ESD Grounding Mats, Adapts 10 mm Socket to 10 mm Socket

2 Person Grounding

Conductive Velcro Band Made of Nylon and Coated on Inside with Conductive Carbon

Blue Bench Mat and Common Point Ground Cord

Use in Soldering or Assembly Area

Common Ground Point ( 12-8032 )

Use in Soldering or Assembly Area

Common Ground Point ( 12-8032 )

Foamed Soft Mat

AC Operation, Operates on Demand, Common Point Grounding Jacks for 2 Straps

2” Width

Features

Description

Figure

No.

Retail

Part No.

Fig. 1 Fig. 2 Fig. 3 Fig. 4

Fig. 5 Fig. 6 Fig. 7 Fig. 8

Fig. 9 Fig. 10 Fig. 11 Fig. 12

with 12-8028