Power Inductors - Shielded CTPC3010F Series From 1.0 H to 22 H www.ctparts.com SPECIFICATIONS Part numbers indicate available inductance tolerance: M = 20%, N = 30% Part Inductance Number Marking (H) L Test Freq. (KHz) DCR (m) IDC1 IDC2 20% (A) (A) CTPC3010F-1R0N CTPC3010F-1R2N CTPC3010F-1R5N CTPC3010F-2R2N CTPC3010F-3R3N CTPC3010F-3R9N CTPC3010F-4R7M CTPC3010F-5R6M CTPC3010F-6R8M CTPC3010F-8R2M A B C E G H I J K L 1.0 1.2 1.5 2.2 3.3 3.9 4.7 5.6 6.8 8.2 100 100 100 100 100 100 100 100 100 100 64 72 86 120 170 200 250 300 350 400 1.50 1.30 1.10 0.95 0.80 0.70 0.65 0.60 0.55 0.50 1.70 1.60 1.45 1.25 1.00 0.90 0.85 0.78 0.70 0.65 CTPC3010F-100M CTPC3010F-150M CTPC3010F-220M M O Q 10.0 15.0 22.0 100 100 100 490 680 1000 0.45 0.38 0.33 0.60 0.50 0.40 PHYSICAL DIMENSIONS Size A B C mm inches Not Shown at Actual Size Typ. E G Typ. Typ. 3.00.2 2.90.2 1.0 1.5 0.76 1.2 0.7 0.120.008 0.11 0.008 0.04 0.06 0.03 0.05 0.03 E E D F Powder Coating E C B F Typ. A CHARACTERISTICS G Marking PAD LAYOUT Unit: mm 3.2 3.4 OR 3.3 1.6 Description: SMD Shielded Power Inductor Applications: Mainly used as a power source inductor for mobile phones, HDDs, LCD panels and DSCs. Operating Temperature: -40C to +105C (includes self temp. rise) IDC1: Based on inductance change (DL/L0: < 30%) at ambient temp. 25C IDC2: Based on temperature rise (DT: 40C Typ.) Rated Current: IDC1 or IDC2, whichever value is lower. Resistance to Solder Heat: 260C 10 secs. Inductance Tolerance: 20%, 30% Testing: Inductance is tested on an HP4284A at 100KHz, 0.1V Packaging: Tape & Reel Marking: Parts are marked with letter identifier. Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request. Samples available. See website for ordering information. D Max. 1.4 0.6 Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright (c) 2010 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice REV 05.11.10