Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC754S8GE v00.0409 GaAs HBT HIGH LINEARITY PUSH-PULL AMPLIFIER, 75 Ohm, DC - 1 GHz Amplifiers - Driver & Gain Block - SMT 8 Typical Applications Features The HMC754S8GE is ideal for: Output IP2: +78 dBm * CATV / Broadband Infrastructure High Gain: 14.5 dB * Test & Measurement Equipment High Output IP3: +38 dBm * Line Amps and Fiber Nodes 75 Ohm Impedance * Customer Premise Equipment Single Positive Supply: +5V Robust 1000V ESD, Class 1C SOIC-8 SMT Package Functional Diagram General Description The HMC754S8GE is a GaAs/InGaP HBT Dual Channel Gain Block MMIC SMT amplifier covering DC to 1 GHz. This versatile product contains two gain blocks, packaged in a single 8 lead plastic SOIC-8, for use with both amplifiers combined in push-pull configuration using external baluns to cancel out second order non-linearities and improve IP2 performance. In this configuration, the HMC754S8GE offers high gain, very low distortion & simple external matching. This high linearity amplifier consumes only 160mA from a single positive supply. Electrical Specifications, TA = +25 C, Vcc1 = Vcc2 = 5V, Zo = 75 Ohm [1] Parameter Min. Typ. Max. Units 13.5 12.7 12.1 14.7 14.2 13.4 dB dB dB Gain 0.05 - 0.5 GHz 0.5 - 0.87 GHz 0.87 - 1.0 GHz Gain Variation Over Temperature 0.05 - 0.87 GHz 0.008 dB/ C Input Return Loss 0.05 - 0.5 GHz 0.5 - 0.87 GHz 17 10 dB dB Output Return Loss 0.05 - 0.5 GHz 0.5 - 0.87 GHz 10 20 dB dB Reverse Isolation 0.05 - 0.87 GHz Output Power for 1 dB Compression (P1dB) 0.05 - 0.87 GHz Output Third Order Intercept Point (IP3) (Pout= 0 dBm per tone, 1 MHz spacing) Output Second Order Intercept Point (IP2) [2] 23 dB 21 dBm 0.05 - 0.87 GHz 38 dBm 0.05 - 0.5 GHz 78 dBm 19.5 0.05 - 0.87 GHz -81 dBc Composite Triple Beat (CTB) [2] 0.05 - 0.87 GHz -75 dBc Cross Modulation (XMOD) [2] 0.05 - 0.87 GHz -67 dBc Noise Figure 0.05 - 0.5 GHz 0.05 - 0.87 GHz 5.5 6.5 dB dB Composite Second Order (CSO) Supply Current (Icc1 + Icc2) 145 160 175 mA [1] Data taken with dual amplifiers combined in push-pull (default) configuration [2] Input level +15 dBmV, 133 channels - with analog modulation 8-1 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC754S8GE v00.0409 GaAs HBT HIGH LINEARITY PUSH-PULL AMPLIFIER, 75 Ohm, DC - 1 GHz Gain vs. Temperature 18 10 15 S21 S11 S22 0 12 -10 25C 85C -40C 9 -20 6 -30 3 -40 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0 0.1 0.2 0.3 FREQUENCY (GHz) 0.4 0.5 0.6 0.7 0.8 0.9 1 FREQUENCY (GHz) Output Return Loss vs. Temperature Input Return Loss vs. Temperature 0 0 25C 85C -40C 25C 85C -40C -5 RETURN LOSS (dB) -5 RETURN LOSS (dB) 8 -10 -15 -20 -25 -10 -15 -20 -25 -30 -30 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0.2 0.25 0.3 0.35 FREQUENCY (GHz) 0.4 0.45 0.5 FREQUENCY (GHz) FREQUENCY (GHz) Output IP3 vs. Temperature Output IP2 vs. Temperature 100 42 40 Amplifiers - Driver & Gain Block - SMT 20 GAIN (dB) RESPONSE (dB) Gain & Return Loss 90 IP2 (dBm) IP3 (dBm) 38 36 25C 85C -40C 34 70 25C 85C -40C 60 32 30 80 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 FREQUENCY (GHz) 0.8 0.9 1 50 0 0.05 0.1 0.15 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 8-2 HMC754S8GE v00.0409 GaAs HBT HIGH LINEARITY PUSH-PULL AMPLIFIER, 75 Ohm, DC - 1 GHz P1dB vs. Temperature 10 25 25C 85C -40C 20 P1dB (dBm) NOISE FIGURE (dB) 8 6 4 2 25C 85C -40C 15 10 5 0 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0 0.1 0.2 0.3 FREQUENCY (GHz) 0.4 0.5 0.6 0.7 0.8 0.9 1 0.4 0.45 0.5 FREQUENCY (GHz) Reverse Isolation vs. Temperature Output IP2 vs. Output Power 90 0 -5 Pout = -3dBm Pout = 0dBm Pout = 3dBm Pout = 6dBm 86 25C 85C -40C -10 IP2 (dBm) REVERSE ISOLATION (dB) Amplifiers - Driver & Gain Block - SMT 8 Noise Figure vs. Temperature -15 82 78 -20 74 -25 -30 70 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 1 0.05 0.1 0.15 FREQUENCY (GHz) 0.2 0.25 0.3 0.35 FREQUENCY (GHz) CSO / CTB / XMOD @ +15 dBmV input, 133 channels (Analog) -50 CSOCSO+ CTB XMOD RESPONSE (dBc) -60 -70 -80 -90 -100 0 8-3 0.1 0.2 0.3 0.4 0.5 0.6 0.7 FREQUENCY (GHz) 0.8 0.9 1 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC754S8GE v00.0409 GaAs HBT HIGH LINEARITY PUSH-PULL AMPLIFIER, 75 Ohm, DC - 1 GHz Option 1 - Improved Input Return Loss & Gain Flatness (with Lower IP2) Application Gain & Return Loss Output IP2 vs. Frequency 10 0 -10 80 70 -20 60 -30 -40 50 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0 0.05 0.1 0.15 FREQUENCY (GHz) 0.2 0.25 0.3 0.35 FREQUENCY (GHz) 0.4 0.45 0.5 0.8 0.9 1 Noise Figure vs. Frequency Output IP3 vs. Frequency 42 10 9 40 NOISE FIGURE (dB) 8 36 34 7 6 5 4 3 2 32 1 30 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 1 0 FREQUENCY (GHz) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 FREQUENCY (GHz) P1dB vs. Frequency 25 20 P1dB (dBm) IP3 (dBm) 38 Amplifiers - Driver & Gain Block - SMT 90 S21 S11 S22 IP2 (dBm) RESPONSE (dB) 8 100 20 15 10 5 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 8-4 HMC754S8GE v00.0409 GaAs HBT HIGH LINEARITY PUSH-PULL AMPLIFIER, 75 Ohm, DC - 1 GHz Option 2 - 10 to 100 MHz Application 8-5 Output IP3 vs. Frequency 42 20 40 S21 S11 S22 0 38 IP3 (dBm) RESPONSE (dB) 10 -10 36 -20 34 -30 32 30 -40 0 10 20 30 40 50 60 70 80 90 100 0 0.1 0.2 0.3 Noise Figure vs. Frequency 0.4 0.5 0.6 0.7 0.8 0.9 1 80 90 100 FREQUENCY (GHz) FREQUENCY (MHz) P1dB vs. Frequency 25 10 9 20 8 7 P1dB (dBm) NOISE FIGURE (dB) Amplifiers - Driver & Gain Block - SMT 8 Gain & Return Loss 6 5 4 15 10 3 5 2 1 0 0 0 10 20 30 40 50 60 FREQUENCY (MHz) 70 80 90 100 0 10 20 30 40 50 60 70 FREQUENCY (MHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC754S8GE v00.0409 GaAs HBT HIGH LINEARITY PUSH-PULL AMPLIFIER, 75 Ohm, DC - 1 GHz Collector Bias Voltage (Vcc) +5.5 Vdc RF Input Power (RFIN) +10 dBm Junction Temperature 150 C Continuous Pdiss (T = 85 C) (derate 18.69 mW/C above 85 C) 1.21 W Thermal Resistance (junction to ground paddle) 53.5 C/W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C ESD Sensitivity (HBM) Class 1C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO 8 Amplifiers - Driver & Gain Block - SMT Absolute Maximum Ratings PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish HMC754S8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL Rating MSL1 [2] Package Marking [3] HMC754 XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 8-6 HMC754S8GE v00.0409 GaAs HBT HIGH LINEARITY PUSH-PULL AMPLIFIER, 75 Ohm, DC - 1 GHz Amplifiers - Driver & Gain Block - SMT 8 8-7 Pin Descriptions Pin Number Function Description 1, 4 RFIN1, RFIN2 These pins are DC coupled. An off chip DC block capacitor is required. 5, 8 RFOUT1/VCC1, RFOUT2/VCC2 RF Output and DC bias for the output stage. 2 GND These pins and package bottom must be connected to RF/ DC ground. 3, 6, 7 N/C No connection. These pins may be connected to RF ground. Performance will not be affected. Interface Schematic For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC754S8GE v00.0409 GaAs HBT HIGH LINEARITY PUSH-PULL AMPLIFIER, 75 Ohm, DC - 1 GHz Application Circuit for Push-Pull Operation Components for Selected Options Tune Options Standard Option 1 Option 2 Evaluation PCB Number 124063 126311 124825 T1 [1] ETC 1-1-13 MABACT0039 ETC1-1T-5TR T2 [1] ETC 1-1-13 ETC 1-1-13 ETC1-1T-5TR L1, L2 180 nH 180 nH 10 uH C13 Open 1.1 pF Open Amplifiers - Driver & Gain Block - SMT 8 [1] 1:1 Transformer For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 8-8 HMC754S8GE v00.0409 GaAs HBT HIGH LINEARITY PUSH-PULL AMPLIFIER, 75 Ohm, DC - 1 GHz Amplifiers - Driver & Gain Block - SMT 8 Evaluation PCB - Standard and Option 2 Application List of Materials for Evaluation PCB [1] Item Description J1, J2 F-Connector J3 - J6 DC PIN C1 - C6 1 nF Capacitor, 0402 Pkg. C7, C8 4.7 F Capacitor, Tantalum, 0603 Pkg. C9, C11 68 pF Capacitor, 0402 Pkg. C10, C12 10 nF Capacitor, 0402 Pkg. L1, L2 [2] Inductor, 0603 Pkg. R1, R2 0 Ohm Resistor, 0603 Pkg. T1, T2 [2] 1:1 Transformer U1 HMC754S8GE Amplifier PCB [3] 124061 Evaluation PCB The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 75 ohm impedance while the package ground leads and package bottom should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. [1] When requesting an evaluation board, please reference the appropriate evaluation PCB number listed in the table "Components for Selected Options." [2] Please refer to "Components for Selected Options" table for values [3] Circuit Board Material: Rogers 4350 or Arlon 25FR 8-9 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC754S8GE v00.0409 GaAs HBT HIGH LINEARITY PUSH-PULL AMPLIFIER, 75 Ohm, DC - 1 GHz Evaluation PCB - Option 1 Application Item Description J1, J2 F-Connector J3 - J6 DC PIN C1 - C6 1 nF Capacitor, 0402 Pkg. C7, C8 4.7 F Capacitor, Tantalum, 0603 Pkg. C9, C11 68 pF Capacitor, 0402 Pkg. C10, C12 10 nF Capacitor, 0402 Pkg. C13 1.1 pF Capacitor, 0402 Pkg. L1, L2 180 nH Inductor, 0603 Pkg. R1, R2 0 Ohm Resistor, 0603 Pkg. T1, T2 [2] 1:1 Transformer U1 HMC754S8GE Amplifier PCB [3] 126309 Evaluation PCB [1] The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 75 ohm impedance while the package ground leads and package bottom should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. Amplifiers - Driver & Gain Block - SMT List of Materials for Evaluation PCB 8 [1] When requesting an evaluation board, please reference the appropriate evaluation PCB number listed in the table "Components for Selected Options." [2] Please refer to "Components for Selected Options" table for values [3] Circuit Board Material: Rogers 4350 or Arlon 25FR For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 8 - 10 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC754S8GE HMC754S8GETR 124063-HMC754S8GE 124825-HMC754S8GE 126311-HMC754S8GE