270
Excerpt from
our master catalogue
wiecon
wiecon
272
PCB terminals
Pluggable PCB terminals and headers
Two part PCB terminals with
pin strip headers
Modular railmount terminals with integral
PCB edge connectors
PCB terminals
2 tier PCB terminals
3 tier PCB terminals
4 tier PCB terminals
Special terminals
RAST 5 system
Termination modules
Marker tag/strips
In general, all Wieland components which are obliged to have the
Aidentification are provided with the Amark
wiecon
273
CONTENTS
header
Pitch 3.50/3.81 mm
• Terminal connector, rising cage clamp version Page 280
• Terminal connector, spring clamp version Page 281
• Header Page 284
Pitch 5.00/5.08/7.50/7.62 mm
• Terminal connector, rising cage clamp version Page 286
• Header with in-line terminal
spring clamp version (= inverted socket) Page 295
• Terminal connector, spring clamp version Page 294
• Terminal connector, soldered version Page 295
• Headers Page 297
• TOP plug with strain relief Page 320
Pitch 3.50/5.00 mm screw version Page 316
Pitch 3.50 mm spring clamp version Page 324
Pitch 5.00 mm modular railmount terminals with integral header Page 310
Pitch 3.50 mm rising cage clamp version Page 328
Pitch 5.00 mm rising cage clamp version Page 330
Pitch 3.50/3.81 mm
• rising cage clamp version Page 280
Pitch 5.00/5.08 mm
• rising cage clamp version Page 286
• spring clamp version Page 292
Pitch 6,35 mm Page 355
Pitch 7.50/7.62 mm
• rising cage clamp version Page 288
• spring clamp version Page 294
Pitch 10.00/10.16 mm
• rising cage clamp version Page 318, 375, 377
Pitch 5.00/5.08 mm
• rising cage clamp version Page 364
Pitch 5.00/5.08 mm
• rising cage clamp version Page 370
Pitch 5.00 mm
• rising cage clamp version Page 373
Pitch 5.08 mm
• Modular terminal Page 378
• Disconnect terminal Page 378
• Modular fuse terminal Page 379
• ASI connector Page 392
Page 380
Page 386
Page 394
5.00/5.08 7.50/7.62 5.00/5.08 5.00/5.08 7.50/7.62 5.00/5.08 7.50/7.62 5.00/5.08 5.00/5.08
8113 S/W 8313 S/W 8113 S/WOF 8113 S/WF 8313 S/WF 8113 S/G 8313 S/G 8113 S/GOF 8113 S/GF
8213 S/W 8413 S/W 8213 S/WOF 8213 S/WF 8413 S/WF 8213 S/G 8413 S/G 8213 S/GOF 8213 S/GF
2 – 24 2 – 12 2 – 24 2 – 22 2 – 12 2 – 24 2 – 12 2 – 24 2 – 22
•• ••
•• ••
•••••
••
••
••
•
•• ••
•• ••
••
••
•• ••
•• ••
•• ••
wiecon
wiecon PCB
274
2 – 24
2 – 24
2 – 24
2 – 24
2 – 22
2 – 12
2 – 24
2 – 24
2 – 12
2 – 12
2 – 24
2 – 24
2 – 24
8113 8113 8113
8213
8113
8213
Pitch 5.00/5.08 mm
Pitch 7.50/7.62 mm
Page 291
8113 BK 5.00
Page 286
8113 B 5.00
8213 B 5.08
Page 292
8113 BFK 5.00
8213 BFK 5.08
Page 287
8213 B/S 5.08
Page 288
8313 B 7.50
8413 B 7.62
Page 286
8113 B/F 5.00
8213 B/F 5.08
Page 288
8313 B/F 7.50
8413 B/F 7.62
Page 289
8113 B/VL 5.00
8213 B/VL 5.08
Page 289
8113 B/VR 5.00
8213 B/VR 5.08
Page 290
8413 B/VL 7.62
Page 290
8413 B/VR 7.62
Page 296
8113 B/TOP 5.00
8213 B/TOP 5.08
Page 295
8213 BL/G 5.08
Page 295
8213 BL/W 5.08
Pluggable PCB terminals and headers
Pole
Page 298 Page 301 Page 299 Page 299 Page 301 Page 297 Page 300 Page 297 Page 298
Pitch
wiecon
275
8213
8213
8213
8213
8213
8213
8213
8213
8113
8213
8113
8213
8113 8113
8213
8113 8113
82138213
8213
8213
8213
8213
8213
8213 8213
7.50/7.62 5.00/5.08 5.00/5.08 5.08 5.00/5.08 5.00/5.08 5.08 5.08 5.08 5.08 5.00/5.08 5.00/5.08
8313 S/GF 8113 S/S 8113 S/S1 8213 SUFK 8113 SE/W 8113 SE/G 8213 S/ 8213 S/ 8213 S/ 8213 S/ 8113 SEG/W 8113 SEG/G
8413 S/GF 8213 S/S 8213 S/S1 8213 SE/W 8213 SE/G DFWW DFWWM DFLS DFLSM 8213 SEG/W 8213 SEG/G
2 – 12 2 – 24 2 – 24 2 – 12 (24) 2 – 24 2 – 24 2 – 24 2 – 22 2 – 24 2 – 22 2 – 24 2 – 24
•• •• ••
•••••• • ••
•••••••••••
••• •• •• •
•••••
•
•••••••••••
•••••••••••
•••••• • ••
••• ••
•
Page 300 Page 302 Page 302 Page 293 Page Page Page 305 Page 305 Page 304 Page 304
303 303
slot together slot together with nut with nut
5.00 5.00 7.50 5.00 7.50 5.00
2 – 24 2 – 24 2 – 12 2 – 24 2 – 12 2 – 24
•• •
••
•• •
•• •
•• •
•• •••
wiecon
wiecon PCB
276
2 – 24
2 – 12
2 – 24
2 – 24
2 – 24
2 – 24
Pitch 5.00/7.50 mm
Page 286
8113 B 5.00
Page 288
8313 B 7.50
Page 289
8113 B/VL 5.00
Page 289
8113 B/VR 5.00
Page 296
8113 B/TOP 5.00
Page 292
8113 BFK 5.00
Pitch
Pluggable PCB terminals and
modular railmount terminals
Page 310 Page 310 Page 311 Page 312 Page 312 Page 308
slot together slot together slot together slot together slot together slot together
wiecon
277
2 – 20
2 - 20
2 - 20
2 - 20
2 - 20
2 - 20
2 – 20
3.50/3.81 3.50/3.81 3.50/3.81 3.50/3.81
8513 S/W 8513 S/WF 8513 S/G 8513 S/GF
8813 S/W 8813 S/WF 8813 S/G 8813 S/GF
2 – 20 2 – 20 2 – 20 2 – 20
••
••
••
••
••
••
••
8813 8813
8813 8813
8513 8513
8813 8813
8813 8813
Pluggable PCB terminals and headers
Page 284 Page 285 Page 284 Page 285
Pitch 3.81 mm
Pitch 3.50 mm
Page 280
8513 B 3.50
8813 B 3.81
Page 280
8513 B/F 3.50
8813 B/F 3.81
Page 282
8813 B/VR 3.81
Page 282
8813 B/VL 3.81
Page 283
8813 B/VRF 3.81
Page 283
8813 B/VLF 3.81
Page 281
8513 BFK 3.50
Pitch
wiecon
wiecon PCB
278
❐PCB terminals with closed side walls:
ensure no miss-connection
❐PCB terminals with open side walls
enable expansion with no effect on the
pitch to the circuit board
❐pitch options: 3.81/5.00/5.08/
7.50/7.62/10.00/10.16 mm
❐two tier headers
Flange version
❐ terminal connectors and headers can also
incorporate additional fixing elements such
as screw flanges which helps prevent them
being separated accidentally
❐
secure electrical and mechanical connection
even under shock and vibration
Coding
❐
a coding system is available to prevent
the connection of non-interchangeable
components. The coding parts can be
inserted into special slots in either or both
the terminal connector and header
❐coding does not effect number of available
poles
❐coding possible with a minimum of 4 poles
Marking
❐ clear pole marking which is easy to read
enabling easy connection
❐ by means of ink jet printing directly onto
the terminal connector using indelible ink
❐ special marking is possible on request
DQS certification for all product areas
❐ Quality standard in accordance with
DIN ISO 9001
❐ In development, production and installation
❐ Continued control of the quality standard by
means of regular internal and external
quality audits
❐ Compatible with certificates of other
countries:
– BSI, Great Britain
– SQS, Switzerland
– Aib-Vincotte, Belgium
– ÖQS, Austria
Pluggable PCB terminals and headers
Pluggable connection describes
the method used to connect an external
conductor to a PCB, via a terminal
connector and header
System features
❐ plug in system is simple to maintain
❐ screw termination by means of rising
cage clamp for security
❐ screw connection is easy to operate
❐ spring clamp connection for speed
❐ comprehensive range means that the
direction of insertion/withdrawal and
conductor guide methodology can be
individually matched to the application
❐ simple, clear and secure method of
connecting and disconnecting
❐ multiple pole configuration
❐ connection of single core and finely
stranded conductors up to 1.5 mm2
and 2.5 mm2
❐ metric and imperial pitch options
The pitch measured in inches can be
identified by a pip on the conductor
guide funnel
❐ clamping with TOP connection
Applications
❐ designed for frequent and ongoing
equipment maintenance and system
changes as the pluggable terminal
connector and PCB header are easily
connected and disconnected
❐ prefabricated wiring arrangements can
be easily interfaced to connect and
enable the system
Type range
❐ 2 - 24 pole
❐different variants of terminals and
headers allow for horizontal, vertical and
angled connection of wiring in relation
to the PCB (eg. 35˚)
wiecon
279
Materials
Metal components
❐ made from special alloys and/ or special
surface treatments for:
❐
clamping part and clamping screw:
made from nickel plated brass
top version: galvanised and chromated
steel
❐ socket contact: tinned bronze
❐ header and solder pins: made from a
high quality copper alloy
❐ minimum contact resistance
❐ high corrosion protection
❐ secure, dynamic clamping function
Insulating housing:
❐
Polyamide 66/6, used on account of its
excellent electrical, chemical and
mechanical properties
(see facts & DATA section)
❐ material in accordance with UL 94 V-0
❐colour grey, similar to RAL 7032
❐ glass filled for additional reinforcement
(no glass reinforcement in tier-
type header and solderable parts)
Abbreviations for plastic material
markings:
PA 66/6 = Polyamide 66/6
PC = Polycarbonate
PBT = Polybutylenterephthalate
Note:
The conductor size and connecting
capacity relate to unprepared conductors
without ferrules.
The rated current specified corresponds
to the maximum load of PCB terminal
with connected conductor with the given
conductor size.
The rated voltage is specified in accordan-
ce with DIN VDE 0110 Part 1 (IEC 60 664-1)
– Insulation coordination for electrical
equipment in low voltage installations and
refers to the received condition of the PCB
terminals.
When fitting PCB terminals to the PCB,
the appropriate PCB must be selected and
given the relevant dimensions (e.g. as
regards the resistance of the PCB to
creepage, spacing of the conductors and
soldering pads).
In addition, the influences of the environ-
ment (level of pollution) to which the
equipment is to be exposed are to be
taken into account. The specified rate
voltages for the whole module only apply
if the PCB and PCB terminal have been
matched correctly and carefully.
System 8813
❐
mini-PCB terminals 2 to 20 pole
❐ terminal and header horizontal or vertical
in relation to the PCB
❐total design height: 11 mm, of which
only 8 mm is above the PCB
❐ in the space saving 3.81 mm pitch
❐ conductor size 1.5 mm2
❐ suitable for coding:
– plug terminal with coding pins
– socket header with coding
channels
❐ also with locking flange
Panel mount header
❐ header can be inserted in the unit wall
(see inset)
❐ plug in connection through the wall
❐ header = bush housing
❐ threaded bush for vibration resistant
screw connection of flange designs
❐ can be screwed to the housing wall
❐
connecting wiring inside the housing
via termi-point or solder connection
Inverted version
❐ solderable terminal as header with
straight and angled socket solder pins
❐ can be coded using coding parts in
special slots
❐ the mounting holder enables locking
with the header
Top version
❐ screw connection and conductor feed in
line with connection
❐ plug with connection in line with
conductor
❐ very easy to use in restricted installation
conditions
❐ with and without integral LED
Special types
❐ for the control panel:
– terminal blocks with integral header
– assembles to 5.00 mm-pitch
– can be mounted on DIN rail
❐ terminals with header for system
8113
❐ with vertical socket outlet
❐ with horizontal socket outlet
Type 8513 B/...F, 8813 B/...F
Connection in line with conductor
Type 8513 B/..., 8813 B/...
Connection in line with conductor
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
6.5
M 2
wiecon
wiecon PCB
280
No. 30 – 16 AWG 300 V 8 A
No. 22 – 14 AWG 300 V 5 A
qw
No. 30 – 16 AWG 300 V 8 A
No. 22 – 14 AWG 300 V 5 A
qw
cable size
6.5
M 2
1.5 mm2
25.640.0253.0
25.640.0353.0
25.640.0453.0
25.640.0553.0
25.640.0653.0
25.640.0753.0
25.640.0853.0
25.640.0953.0
25.640.1053.0
25.640.1153.0
25.640.1253.0
25.640.1353.0
25.640.1453.0
25.640.1553.0
25.640.1653.0
25.641.3253.0
25.641.3353.0
25.641.3453.0
25.641.3553.0
25.641.3653.0
25.641.3753.0
25.641.3853.0
25.641.3953.0
25.641.4053.0
25.641.4153.0
25.641.4253.0
25.641.4353.0
25.641.4453.0
25.641.4553.0
25.641.4653.0
25.641.0253.0
25.641.0353.0
25.641.0453.0
25.641.0553.0
25.641.0653.0
25.641.0753.0
25.641.0853.0
25.641.0953.0
25.641.1053.0
25.641.1153.0
25.641.1253.0
25.641.1353.0
25.641.1453.0
25.641.1553.0
25.641.1653.0
25.640.3253.0
25.640.3353.0
25.640.3453.0
25.640.3553.0
25.640.3653.0
25.640.3753.0
25.640.3853.0
25.640.3953.0
25.640.4053.0
25.640.4153.0
25.640.4253.0
25.640.4353.0
25.640.4453.0
25.640.4553.0
25.640.4653.0
17.40
20.90
24.40
27.90
31.40
34.90
38.40
41.90
45.40
48.90
52.40
55.90
59.40
62.90
66.40
7.00
10.50
14.00
17.50
21.00
24.50
28.00
31.50
35.00
38.50
42.00
45.50
49.00
52.50
56.00
3.50
7.00
10.50
14.00
17.50
21.00
24.50
28.00
31.50
35.00
38.50
42.00
45.50
49.00
52.50
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
25.620.0253.0
25.620.0353.0
25.620.0453.0
25.620.0553.0
25.620.0653.0
25.620.0753.0
25.620.0853.0
25.620.0953.0
25.620.1053.0
25.620.1153.0
25.620.1253.0
25.620.1353.0
25.620.1453.0
25.620.1553.0
25.620.1653.0
25.621.3253.0
25.621.3353.0
25.621.3453.0
25.621.3553.0
25.621.3653.0
25.621.3753.0
25.621.3853.0
25.621.3953.0
25.621.4053.0
25.621.4153.0
25.621.4253.0
25.621.4353.0
25.621.4453.0
25.621.4553.0
25.621.4653.0
25.621.0253.0
25.621.0353.0
25.621.0453.0
25.621.0553.0
25.621.0653.0
25.621.0753.0
25.621.0853.0
25.621.0953.0
25.621.1053.0
25.621.1153.0
25.621.1253.0
25.621.1353.0
25.621.1453.0
25.621.1553.0
25.621.1653.0
25.620.3253.0
25.620.3353.0
25.620.3453.0
25.620.3553.0
25.620.3653.0
25.620.3753.0
25.620.3853.0
25.620.3953.0
25.620.4053.0
25.620.4153.0
25.620.4253.0
25.620.4353.0
25.620.4453.0
25.620.4553.0
25.620.4653.0
18.01
21.82
25.63
29.44
33.25
37.06
40.87
44.68
48.49
52.30
56.11
59.92
63.73
67.54
71.35
8.41
12.22
16.03
19.84
23.65
27.46
31.27
35.08
38.89
42.70
46.51
50.32
54.13
57.94
61.75
3.81
7.62
11.43
15.24
19.05
22.86
26.67
30.48
34.29
38.10
41.91
45.72
49.53
53.34
57.15
Pluggable PCB terminal,
rising cage clamp system, pitch 3.50/3.81 mm
Box Qty GFL G T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
unmarked marked markedunmarked
Pitch 3.81 mm
Pitch 3.50 mm
with screw flange
Rated cross section:
1.5 mm2
Rated current:
8 A
Wire range:
0.14 – 1.5 mm2single core/finely stranded
125 V/2.5 kV/3 – overvoltage category III
250 V/2.5 kV/2 – overvoltage category II
*690 V/2.5 kV/1 – overvoltage category I
* max. 600V for non earthed systems or expected overvoltage
≤3 kV for L ≥2.00 mm and ≤2.5 kV for 2.0 mm > L ≥1.5 mm
unmarked marked markedunmarked
100
100
50
50
50
50
50
50
50
50
50
5
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
wiecon
281
DIN 5264 A 0.4 x 2.5
8 8
cable size
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
25.630.0253.0
25.630.0353.0
25.630.0453.0
25.630.0553.0
25.630.0653.0
25.630.0753.0
25.630.0853.0
25.630.0953.0
25.630.1053.0
25.630.1153.0
25.630.1253.0
25.630.1353.0
25.630.1453.0
25.630.1553.0
25.630.1653.0
25.630.3253.0
25.630.3353.0
25.630.3453.0
25.630.3553.0
25.630.3653.0
25.630.3753.0
25.630.3853.0
25.630.3953.0
25.630.4053.0
25.630.4153.0
25.630.4253.0
25.630.4353.0
25.630.4453.0
25.630.4553.0
25.630.4653.0
06.502.4300.0
6.90
10.40
13.90
17.40
20.90
24.40
27.90
31.40
34.90
38.40
41.90
45.40
48.90
52.40
55.90
3.50
7.00
10.50
14.00
17.50
21.00
24.50
28.00
31.50
35.00
38.50
42.00
45.50
49.00
52.50
25.642.3253.0
25.642.3353.0
25.642.3453.0
25.642.3553.0
25.642.3653.0
25.642.3753.0
25.642.3853.0
25.642.3953.0
25.642.4053.0
25.642.4153.0
25.642.4253.0
25.642.4353.0
25.642.4453.0
25.642.4553.0
25.642.4653.0
25.642.0253.0
25.642.0353.0
25.642.0453.0
25.642.0553.0
25.642.0653.0
25.642.0753.0
25.642.0853.0
25.642.0953.0
25.642.1053.0
25.642.1153.0
25.642.1253.0
25.642.1353.0
25.642.1453.0
25.642.1553.0
25.642.1653.0
8.40
11.90
15.40
18.90
22.40
25.90
29.40
32.90
36.40
39.90
43.40
46.90
50.40
53.90
57.40
3.50
7.00
10.50
14.00
17.50
21.00
24.50
28.00
31.50
35.00
38.50
42.00
45.50
49.00
52.50
5
Type 8513 BFK
No. 30 – 16 AWG 300 V 8 A
No. 22 – 14 AWG 300 V 5 A
qw
Type 8513 SUFK
No. 30 – 16 AWG 300 V 8 A
No. 22 – 14 AWG 300 V 5 A
qw
VDE 0110
UL Da ta
CSA Data
Approvals
Accessories:
Pluggable PCB terminals,
spring clamp system, pitch 3.50 mm
Rated cross section:
1.5 mm2
Rated current:
8 A
Wire range:
0.14 – 1.5 mm2single core/finely stranded
125 V/2.5 kV/3 – overvoltage category III
250 V/2.5 kV/2 – overvoltage category II
*690 V/2.5 kV/1 – overvoltage category I
* max. 600V for non earthed systems or expected overvoltage
≤3 kV for L ≥2.00 mm and ≤2.5 kV for 2.0 mm > L ≥1.5 mm
Box Qty G T Pole Part No. Part No. Part No. Part No.
unmarked marked
Pitch 3.50 mm Type 8513 SUFK
Pitch 3.50 mm Type 8513 BFK
markedunmarked
1.5 mm2
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
wiecon
wiecon PCB
282
No. 30 – 16 AWG 300 V 8 A
No. 22 – 14 AWG 300 V 5 A
igqw
No. 30 – 16 AWG 300 V 8 A
No. 22 – 14 AWG 300 V 5 A
igqw
cable size
1.5 mm2
25.622.0253.0
25.622.0353.0
25.622.0453.0
25.622.0553.0
25.622.0653.0
25.622.0753.0
25.622.0853.0
25.622.0953.0
25.622.1053.0
25.622.1153.0
25.622.1253.0
25.622.1353.0
25.622.1453.0
25.622.1553.0
25.622.1653.0
25.624.3253.0
25.624.3353.0
25.624.3453.0
25.624.3553.0
25.624.3653.0
25.624.3753.0
25.624.3853.0
25.624.3953.0
25.624.4053.0
25.624.4153.0
25.624.4253.0
25.624.4353.0
25.624.4453.0
25.624.4553.0
25.624.4653.0
25.624.0253.0
25.624.0353.0
25.624.0453.0
25.624.0553.0
25.624.0653.0
25.624.0753.0
25.624.0853.0
25.624.0953.0
25.624.1053.0
25.624.1153.0
25.624.1253.0
25.624.1353.0
25.624.1453.0
25.624.1553.0
25.624.1653.0
25.622.3253.0
25.622.3353.0
25.622.3453.0
25.622.3553.0
25.622.3653.0
25.622.3753.0
25.622.3853.0
25.622.3953.0
25.622.4053.0
25.622.4153.0
25.622.4253.0
25.622.4353.0
25.622.4453.0
25.622.4553.0
25.622.4653.0
18.01
21.82
25.63
29.44
33.25
37.06
40.87
44.68
48.49
52.30
56.11
59.92
63.73
67.54
71.35
8.41
12.22
16.03
19.84
23.65
27.46
31.27
35.08
38.89
42.70
46.51
50.32
54.13
57.94
61.75
3.81
7.62
11.43
15.24
19.05
22.86
26.67
30.48
34.29
38.10
41.91
45.72
49.53
53.34
57.15
6.5
M 2
6.5
M 2
Pluggable PCB terminals,
rising cage clamp system, Pitch 3.81 mm
Box Qty GFL G T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 8813 B/... VR
Connection at 90° to conductor
Type 8813 B/... VL
Connection at 90° to conductor
unmarked marked markedunmarked
Pitch 3.81 mm
Rated cross section:
1.5 mm2
Rated current:
8 A
Wire range:
0.14 – 1.5 mm2single core/finely stranded
125 V/2.5 kV/3 – overvoltage category III
250 V/2.5 kV/2 – overvoltage category II
*690 V/2.5 kV/1 – overvoltage category I
* max. 600V for non earthed systems or expected overvoltage
≤3 kV for L ≥2.00 mm and ≤2.5 kV for 2.0 mm > L ≥1.5 mm
wiecon
283
No. 30 – 16 AWG 300 V 8 A
No. 22 – 14 AWG 300 V 5 A
igqw
No. 30 – 16 AWG 300 V 8 A
No. 22 – 14 AWG 300 V 5 A
igqw
25.625.0253.0
25.625.0353.0
25.625.0453.0
25.625.0553.0
25.625.0653.0
25.625.0753.0
25.625.0853.0
25.625.0953.0
25.625.1053.0
25.625.1153.0
25.625.1253.0
25.625.1353.0
25.625.1453.0
25.625.1553.0
25.625.1653.0
25.625.3253.0
25.625.3353.0
25.625.3453.0
25.625.3553.0
25.625.3653.0
25.625.3753.0
25.625.3853.0
25.625.3953.0
25.625.4053.0
25.625.4153.0
25.625.4253.0
25.625.4353.0
25.625.4453.0
25.625.4553.0
25.625.4653.0
25.623.0253.0
25.623.0353.0
25.623.0453.0
25.623.0553.0
25.623.0653.0
25.623.0753.0
25.623.0853.0
25.623.0953.0
25.623.1053.0
25.623.1153.0
25.623.1253.0
25.623.1353.0
25.623.1453.0
25.623.1553.0
25.640.1653.0
25.623.3253.0
25.623.3353.0
25.623.3453.0
25.623.3553.0
25.623.3653.0
25.623.3753.0
25.623.3853.0
25.623.3953.0
25.623.4053.0
25.623.4153.0
25.623.4253.0
25.623.4353.0
25.623.4453.0
25.623.4553.0
25.623.4653.0
6.5
M 2
6.5
M 2
Type 8813 B/... VL F
Connection at 90° to conductor
Type 8813 B/... VR F
Connection at 90° to conductor
Part No.
Part No. Part No. Part No.
unmarked markedunmarked marked
with screw flange with screw flange
Type 8513 S/... W, 8813 S/... W
Connection horizontal to PCB
Type 8513 S/... G, 8813 S/... G
Connection vertical to PCB
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
wiecon
wiecon PCB
284
300 V 8 A
300 V 5 A
qw
300 V 8 A
300 V 5 A
qw
cable size
1.5 mm2
25.647.0253.0
25.647.0353.0
25.647.0453.0
25.647.0553.0
25.647.0653.0
25.647.0753.0
25.647.0853.0
25.647.0953.0
25.647.1053.0
25.647.1153.0
25.647.1253.0
25.647.1353.0
25.647.1453.0
25.647.1553.0
25.647.1653.0
25.646.0253.0
25.646.0353.0
25.646.0453.0
25.646.0553.0
25.646.0653.0
25.646.0753.0
25.646.0853.0
25.646.0953.0
25.646.1053.0
25.646.1153.0
25.646.1253.0
25.646.1353.0
25.646.1453.0
25.646.1553.0
25.646.1653.0
17.40
20.90
24.40
27.90
31.40
34.90
38.40
41.90
45.40
48.90
52.40
55.90
59.40
62.90
66.40
8.40
11.90
15.40
18.90
22.40
25.90
29.40
32.90
36.40
39.90
43.40
46.90
50.40
53.90
57.40
3.50
7.00
10.50
14.00
17.50
21.00
24.50
28.00
31.50
35.00
38.50
42.00
45.50
49.00
52.50
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
25.626.0253.0
25.626.0353.0
25.626.0453.0
25.626.0553.0
25.626.0653.0
25.626.0753.0
25.626.0853.0
25.626.0953.0
25.626.1053.0
25.626.1153.0
25.626.1253.0
25.626.1353.0
25.626.1453.0
25.626.1553.0
25.626.1653.0
25.627.0253.0
25.627.0353.0
25.627.0453.0
25.627.0553.0
25.627.0653.0
25.627.0753.0
25.627.0853.0
25.627.0953.0
25.627.1053.0
25.627.1153.0
25.627.1253.0
25.627.1353.0
25.627.1453.0
25.627.1553.0
25.627.1653.0
18.01
21.82
25.63
29.44
33.25
37.06
40.87
44.68
48.49
52.30
56.11
59.92
63.73
67.54
71.35
9.01
12.82
16.63
20.44
24.25
28.06
31.87
35.68
39.49
43.30
47.11
50.92
54.73
58.54
62.35
3.81
7.62
11.43
15.24
19.05
22.86
26.67
30.48
34.29
38.10
41.91
45.72
49.53
53.34
57.15
100 05.561.0053.0 05.561.0053.0
PCB headers,
pitch 3.50/3.81 mm
Box Qty GFL G T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
unmarked unmarked
Pitch 3.50 mm
Rated current:
8 A
125 V/2.5 kV/3 – overvoltage category III
250 V/2.5 kV/2 – overvoltage category II
*690 V/2.5 kV/1 – overvoltage category I
Approvals for type 8513 have been applied for
* max. 600V for non earthed systems or expected overvoltage
≤3 kV for L ≥2.00 mm and ≤2.5 kV for 2.0 mm > L ≥1.5 mm
unmarked unmarked
Pitch 3.81 mm
Solder pin 0.8 x 0.8 mm
Bore hole Ø 1.2 mm
Solder pin 0.8 x 0.8 mm
Bore hole Ø 1.2 mm
Coding part
(branch)
When using coding parts, the coding fins on the terminal
connector should be removed
Accessories:
Type 8513 S/... GF, 8813 S/... GF
Connection vertical to PCB
Type 8513 S/... WF, 8813 S/... WF
Connection horizontal to PCB
wiecon
285
300 V 8 A
300 V 5 A
qw
300 V 8 A
300 V 5 A
qw
25.647.3253.0
25.647.3353.0
25.647.3453.0
25.647.3553.0
25.647.3653.0
25.647.3753.0
25.647.3853.0
25.647.3953.0
25.647.4053.0
25.647.4153.0
25.647.4253.0
25.647.4353.0
25.647.4453.0
25.647.4553.0
25.647.4653.0
25.646.3253.0
25.646.3353.0
25.646.3453.0
25.646.3553.0
25.646.3653.0
25.646.3753.0
25.646.3853.0
25.646.3953.0
25.646.4053.0
25.646.4153.0
25.646.4253.0
25.646.4353.0
25.646.4453.0
25.646.4553.0
25.646.4653.0
25.626.3253.0
25.626.3353.0
25.626.3453.0
25.626.3553.0
25.626.3653.0
25.626.3753.0
25.626.3853.0
25.626.3953.0
25.626.4053.0
25.626.4153.0
25.626.4253.0
25.626.4353.0
25.626.4453.0
25.626.4553.0
25.626.4653.0
25.627.3253.0
25.627.3353.0
25.627.3453.0
25.627.3553.0
25.627.3653.0
25.627.3753.0
25.627.3853.0
25.627.3953.0
25.627.4053.0
25.627.4153.0
25.627.4253.0
25.627.4353.0
25.627.4453.0
25.627.4553.0
25.627.4653.0
05.561.0053.0 05.561.0053.0
unmarked unmarked
unmarked unmarked
Part No.
Part No. Part No. Part No.
with screw flange with screw flange
Solder pin 0.8 x 0.8 mm
Bore hole Ø 1.2 mm
Solder pin 0.8 x 0.8 mm
Bore hole Ø 1.2 mm
25.323.3253.0
25.323.3353.0
25.323.3453.0
25.323.3553.0
25.323.3653.0
25.323.3753.0
25.323.3853.0
25.323.3953.0
25.323.4053.0
25.323.4153.0
25.323.4253.0
25.323.4353.0
25.323.4453.0
25.323.4553.0
25.323.4653.0
25.322.3253.0
25.322.3353.0
25.322.3453.0
25.322.3553.0
25.322.3653.0
25.322.3753.0
25.322.3853.0
25.322.3953.0
25.322.4053.0
25.322.4153.0
25.322.4253.0
25.322.4353.0
25.322.4453.0
25.322.4553.0
25.322.4653.0
25.320.3253.0
25.320.3353.0
25.320.3453.0
25.320.3553.0
25.320.3653.0
25.320.3753.0
25.320.3853.0
25.320.3953.0
25.320.4053.0
25.320.4153.0
25.320.4253.0
25.320.4353.0
25.320.4453.0
25.320.4553.0
25.320.4653.0
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
wiecon
wiecon PCB
286
.
r
No. 22 – 12 AWG 300 V 15 A
No. 22 – 12 AWG 300 V 15 A
üiqwd
No. 22 – 12 AWG 300 V 15 A
No. 22 – 12 AWG 300 V 15 A
üiqwd
cable size
2.5 mm2
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
25.340.3253.0
25.340.3353.0
25.340.3453.0
25.340.3553.0
25.340.3653.0
25.340.3753.0
25.340.3853.0
25.340.3953.0
25.340.4053.0
25.340.4153.0
25.340.4253.0
25.340.4353.0
25.340.4453.0
25.340.4553.0
25.340.4653.0
25.322.0253.0
25.322.0353.0
25.322.0453.0
25.322.0553.0
25.322.0653.0
25.322.0753.0
25.322.0853.0
25.322.0953.0
25.322.1053.0
25.322.1153.0
25.322.1253.0
25.322.1353.0
25.322.1453.0
25.322.1553.0
25.322.1653.0
25.320.0253.0
25.320.0353.0
25.320.0453.0
25.320.0553.0
25.320.0653.0
25.320.0753.0
25.320.0853.0
25.320.0953.0
25.320.1053.0
25.320.1153.0
25.320.1253.0
25.320.1353.0
25.320.1453.0
25.320.1553.0
25.320.1653.0
25.340.0253.0
25.340.0353.0
25.340.0453.0
25.340.0553.0
25.340.0653.0
25.340.0753.0
25.340.0853.0
25.340.0953.0
25.340.1053.0
25.340.1153.0
25.340.1253.0
25.340.1353.0
25.340.1453.0
25.340.1553.0
25.340.1653.0
25.323.0253.0
25.323.0353.0
25.323.0453.0
25.323.0553.0
25.323.0653.0
25.323.0753.0
25.323.0853.0
25.323.0953.0
25.323.1053.0
25.323.1153.0
25.323.1253.0
25.323.1353.0
25.323.1453.0
25.323.1553.0
25.323.1653.0
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
81.28
86.36
91.44
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
81.28
5.08
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
100 05.561.9153.0 05.561.9153.0
6
M 3
6
M 3
17 to 22 pole on request
17 to 22 pole on request
17 to 24 pole on request
Pluggable PCB terminals,
rising cage clamp, pitch 5.00/5.08 mm
Box Qty GFL G T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 8113 B/.... 8213 B/...
Connection in line with conductor
Type 8113 B/... F, 8213 B/... F
Connection in line with conductor
unmarked unmarked
Pitch 5.00 mm Type 8113
Rated cross section:
2.5 mm2
Rated current:
12 A
Wire range:
0.14 – 2.5 mm2single core/finely stranded
250 V/4 kV/3 – overvoltage category III
400 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
unmarked unmarked
Pitch 5.08 mm Type 8213
marked marked
marked marked
Coding part
(branch)
Accessories:
with screw flange
27.341.3253.0
27.341.3353.0
27.341.3453.0
27.341.3553.0
27.341.3653.0
27.341.3753.0
27.341.3853.0
27.341.3953.0
27.341.4053.0
27.341.4153.0
27.341.4253.0
27.341.4353.0
27.341.4453.0
27.341.4553.0
27.341.4653.0
wiecon
287
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
No. 28 – 12 AWG 300 V 10 A
No. 28 – 12 AWG 300 V 10 A
qw
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
81.28
5.08
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
17 to 24 pole on request
unmarked
Box Qty GFL G T Pole Part No. Part No.
Rated voltages VDE 0110/1.89
UL Da ta
CSA Data
Approvals
Type 8213 B/...S
Pitch 5.08 mm
Rated cross section:
2.5 mm2
Rated current:
12 A
based on ambient temperature of 20 °C, rated cross-section and
max. number of poles
Wire range:
0.5 – 2.5 mm2single core/finely stranded
250 V/4 kV/3 – overvoltage category III
400 V/4 kV/2 – overvoltage category II
400 V/4 kV/1 – overvoltage category I
8
M 2,5
G
T
5,08
23,3
15,4
Coding available upon request
wiecon
wiecon PCB
288
6
M 3
25.324.2253.0
25.324.2353.0
25.324.2453.0
25.324.2553.0
25.324.2653.0
25.324.2753.0
25.324.2853.0
25.324.2953.0
25.324.3053.0
25.324.3153.0
25.324.3253.0
25.360.3253.0
25.360.3353.0
25.360.3453.0
25.360.3553.0
25.360.3653.0
25.360.3753.0
25.360.3853.0
25.360.3953.0
25.360.4053.0
25.360.4153.0
25.360.4253.0
25.324.0253.0
25.324.0353.0
25.324.0453.0
25.324.0553.0
25.324.0653.0
25.324.0753.0
25.324.0853.0
25.324.0953.0
25.324.1053.0
25.324.1153.0
25.324.1253.0
25.360.0253.0
25.360.0353.0
25.360.0453.0
25.360.0553.0
25.360.0653.0
25.360.0753.0
25.360.0853.0
25.360.0953.0
25.360.1053.0
25.360.1153.0
25.360.1253.0
25.380.3253.0
25.380.3353.0
25.380.3453.0
25.380.3553.0
25.380.3653.0
25.380.3753.0
25.380.3853.0
25.380.3953.0
25.380.4053.0
25.380.4153.0
25.380.4253.0
25.324.6253.0
25.324.6353.0
25.324.6453.0
25.324.6553.0
25.324.6653.0
25.324.6753.0
25.324.6853.0
25.324.6953.0
25.324.7053.0
25.324.7153.0
25.324.7253.0
25.380.0253.0
25.380.0353.0
25.380.0453.0
25.380.0553.0
25.380.0653.0
25.380.0753.0
25.380.0853.0
25.380.0953.0
25.380.1053.0
25.380.1153.0
25.380.1253.0
25.324.4253.0
25.324.4353.0
25.324.4453.0
25.324.4553.0
25.324.4653.0
25.324.4753.0
25.324.4853.0
25.324.4953.0
25.324.5053.0
25.324.5153.0
25.324.5253.0
100
100
100
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
.
No. 22 – 12 AWG 300 V 15 A
No. 22 – 12 AWG 300 V 15 A
üiqwd
No. 22 – 12 AWG 300 V 15 A
No. 22 – 12 AWG 300 V 15 A
üiqwd
cable size
2.5 mm2
25.54
33.04
40.54
48.04
55.54
63.04
70.54
78.04
85.54
93.04
100.54
13.00
20.50
28.00
35.50
43.00
50.50
58.00
65.50
73.00
80.50
88.00
7.50
15.00
22.50
30.00
37.50
45.00
52.50
60.00
67.50
75.00
82.50
100
100
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
25.66
33.28
40.90
48.52
56.14
63.76
71.38
79.00
86.62
94.24
101.86
13.12
20.74
28.36
35.98
43.60
51.22
58.84
66.46
74.08
81.70
89.32
7.62
15.24
22.86
30.48
38.10
45.72
53.34
60.96
68.58
76.20
83.82
05.561.9153.0 05.561.9153.0
6
M 3
Pluggable PCB terminals,
rising cage clamp system, Pitch 7.50/7.62 mm
unmarked unmarkedmarked marked
unmarked unmarkedmarked marked
Box Qty GFL G T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 8313 B/..., 8413 B/...
Connection in line with conductor
Type 8313 B/... F, 8413 B/... F
Connection in line with conductor
Pitch 7.50 mm Type 8313
Rated cross section:
2.5 mm2
Rated current:
12 A
Wire range:
0.14 – 2.5 mm2single core/finely stranded
400 V/4 kV/3 – overvoltage category III
690 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
Pitch 7.62 mm Type 8413
Coding part
(branch)
Accessories:
with screw flange
wiecon
289
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
No. 22 – 12 AWG 300 V 15 A
No. 22 – 12 AWG 300 V 15 A
üiqwd
No. 22 – 12 AWG 300 V 15 A
No. 22 – 12 AWG 300 V 15 A
üiqwd
cable size
2.5 mm2
25.326.3253.0
25.326.3353.0
25.326.3453.0
25.326.3553.0
25.326.3653.0
25.326.3753.0
25.326.3853.0
25.326.3953.0
25.326.4053.0
25.326.4153.0
25.326.4253.0
25.326.4353.0
25.326.4453.0
25.326.4553.0
25.326.4653.0
25.325.3253.0
25.325.3353.0
25.325.3453.0
25.325.3553.0
25.325.3653.0
25.325.3753.0
25.325.3853.0
25.325.3953.0
25.325.4053.0
25.325.4153.0
25.325.4253.0
25.325.4353.0
25.325.4453.0
25.325.4553.0
25.325.4653.0
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
25.345.3253.0
25.345.3353.0
25.345.3453.0
25.345.3553.0
25.345.3653.0
25.345.3753.0
25.345.3853.0
25.345.3953.0
25.345.4053.0
25.345.4153.0
25.345.4253.0
25.345.4353.0
25.345.4453.0
25.345.4553.0
25.345.4653.0
25.346.3253.0
25.346.3353.0
25.346.3453.0
25.346.3553.0
25.346.3653.0
25.346.3753.0
25.346.3853.0
25.346.3953.0
25.346.4053.0
25.346.4153.0
25.346.4253.0
25.346.4353.0
25.346.4453.0
25.346.4553.0
25.346.4653.0
25.326.0253.0
25.326.0353.0
25.326.0453.0
25.326.0553.0
25.326.0653.0
25.326.0753.0
25.326.0853.0
25.326.0953.0
25.326.1053.0
25.326.1153.0
25.326.1253.0
25.326.1353.0
25.326.1453.0
25.326.1553.0
25.326.1653.0
25.325.0253.0
25.325.0353.0
25.325.0453.0
25.325.0553.0
25.325.0653.0
25.325.0753.0
25.325.0853.0
25.325.0953.0
25.325.1053.0
25.325.1153.0
25.325.1253.0
25.325.1353.0
25.325.1453.0
25.325.1553.0
25.325.1653.0
25.345.0253.0
25.345.0353.0
25.345.0453.0
25.345.0553.0
25.345.0653.0
25.345.0753.0
25.345.0853.0
25.345.0953.0
25.345.1053.0
25.345.1153.0
25.345.1253.0
25.345.1353.0
25.345.1453.0
25.345.1553.0
25.345.1653.0
25.346.0253.0
25.346.0353.0
25.346.0453.0
25.346.0553.0
25.346.0653.0
25.346.0753.0
25.346.0853.0
25.346.0953.0
25.346.1053.0
25.346.1153.0
25.346.1253.0
25.346.1353.0
25.346.1453.0
25.346.1553.0
25.346.1653.0
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
81.28
5.08
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
100 05.561.9153.0 05.561.9153.0
6
M 3
6
M 3
17 to 24 pole on request
Pluggable PCB terminals,
rising cage clamp system, Pitch 5.00/5.08 mm
Box Qty G T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 8113 B/... VR, 8213 B/... VR
Connection 90° to conductor
Type 8113 B/... VL, 8213 B/... VL
Connection 90° to conductor
unmarked unmarked
Pitch 5.00 mm Type 8113
Rated cross section:
2.5 mm2
Rated current:
12 A
Wire range:
0.14 – 2.5 mm2single core/finely stranded
250 V/4 kV/3 – overvoltage category III
400 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
17 to 24 pole on request
unmarked unmarked
Pitch 5.08 mm Type 8213
marked marked
marked marked
Coding part
(branch)
Accessories:
wiecon
wiecon PCB
290
25.385.2253.0
25.385.2353.0
25.385.2453.0
25.385.2553.0
25.385.2653.0
25.385.2753.0
25.385.2853.0
25.385.2953.0
25.385.3053.0
25.385.3153.0
25.385.3253.0
25.386.2253.0
25.386.2353.0
25.386.2453.0
25.386.2553.0
25.386.2653.0
25.386.2753.0
25.386.2853.0
25.386.2953.0
25.386.3053.0
25.386.3153.0
25.386.3253.0
25.385.0253.0
25.385.0353.0
25.385.0453.0
25.385.0553.0
25.385.0653.0
25.385.0753.0
25.385.0853.0
25.385.0953.0
25.385.1053.0
25.385.1153.0
25.385.1253.0
25.386.0253.0
25.386.0353.0
25.386.0453.0
25.386.0553.0
25.386.0653.0
25.386.0753.0
25.386.0853.0
25.386.0953.0
25.386.1053.0
25.386.1153.0
25.386.1253.0
100
No. 22 – 12 AWG 300 V 15 A
No. 22 – 12 AWG 300 V 15 A
üiqwd
No. 22 – 12 AWG 300 V 15 A
No. 22 – 14 AWG 300 V 15 A
üiqwd
cable size
100
100
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13.12
20.74
28.36
35.98
43.60
51.22
58.84
66.46
74.08
81.70
89.32
7.62
15.24
22.86
30.48
38.10
45.72
53.34
60.96
68.58
76.20
83.82
05.561.9153.0 05.561.9153.0
6
M 3
6
M 3
unmarked unmarkedmarked marked
Pluggable PCB terminals,
rising cage clamp system, pitch 7.62 mm
Box Qty G T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 8413 B/... VR
Connection 90° to conductor
Type 8413 B/... VL
Connection 90° to conductor
Rated cross section:
2.5 mm2
Rated current:
12 A
Wire range:
0.14 – 2.5 mm2single core/finely stranded
400 V/4 kV/3 – overvoltage category III
690 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
Pitch 7.62 mm Type 8413
Coding part
(branch)
Accessories:
2.5 mm2
02.125.1629.0
02.125.1729.0
02.125.1600.0
02.125.1700.0
01.060.3253.0
01.060.3353.0
01.060.3453.0
01.060.3553.0
01.060.3653.0
01.060.3753.0
01.060.3853.0
01.060.3953.0
01.060.4053.0
01.060.4153.0
01.060.4253.0
01.060.4353.0
01.060.4453.0
01.060.4553.0
01.060.4653.0
wiecon
291
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
500
500
4000
3500
01.060.0253.0
01.060.0353.0
01.060.0453.0
01.060.0553.0
01.060.0653.0
01.060.0753.0
01.060.0853.0
01.060.0953.0
01.060.1053.0
01.060.1153.0
01.060.1253.0
01.060.1353.0
01.060.1453.0
01.060.1553.0
01.060.1653.0
0.5 – 1.0 mm2
1.5 – 2.5 mm2
0.5 – 1.0 mm2
1.5 – 2.5 mm2
4
17 to 24 pole on request
Crimp connection
Box Qty G T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 8113 BK
w
unmarked
Pitch 5.00 mm
Rated cross section:
2.5 mm2
Rated current:
10 A when using a 1.0 mm2Leiter
12 A when using a 2.5 mm2Leiter
Contact for wire range:
0.5 – 1.0 mm2finely stranded
(Diameter of insulation 1.4 – 2.3 mm)
Wire range:
1.5 – 2.5 mm2finely stranded
(Diameter of insulation 1.4 – 3.1 mm)
250 V/4 kV/3 – overvoltage category III
400 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
Crimp contacts
Single contacts
Single contacts
Strip
Strip
Crimping tool:
Crimping tool
Crimp dies
95.101.0800.0
05.502.2500.0
marked
Accessories:
25.841.3253.0
25.841.3353.0
25.841.3453.0
25.841.3553.0
25.841.3653.0
25.841.3753.0
25.841.3853.0
25.841.3953.0
25.841.4053.0
25.841.4153.0
25.841.4253.0
25.841.4353.0
25.841.4453.0
25.841.4553.0
25.841.4653.0
25.820.3253.0
25.820.3353.0
25.820.3453.0
25.820.3553.0
25.820.3653.0
25.820.3753.0
25.820.3853.0
25.820.3953.0
25.820.4053.0
25.820.4153.0
25.820.4253.0
25.820.4353.0
25.820.4453.0
25.820.4553.0
25.820.4653.0
wiecon
wiecon PCB
292
No. 22 – 12 AWG 300 V 12 A
q
No. 22 – 12 AWG 300 V 12 A
25.821.3253.0
25.821.3353.0
25.821.3453.0
25.821.3553.0
25.821.3653.0
25.821.3753.0
25.821.3853.0
25.821.3953.0
25.821.4053.0
25.821.4153.0
25.821.4253.0
25.821.4353.0
25.821.4453.0
25.821.4553.0
25.821.4653.0
25.821.0253.0
25.821.0353.0
25.821.0453.0
25.821.0553.0
25.821.0653.0
25.821.0753.0
25.821.0853.0
25.821.0953.0
25.821.1053.0
25.821.1153.0
25.821.1253.0
25.821.1353.0
25.821.1453.0
25.821.1553.0
25.821.1653.0
25.820.0253.0
25.820.0353.0
25.820.0453.0
25.820.0553.0
25.820.0653.0
25.820.0753.0
25.820.0853.0
25.820.0953.0
25.820.1053.0
25.820.1153.0
25.820.1253.0
25.820.1353.0
25.820.1453.0
25.820.1553.0
25.820.1653.0
25.840.3253.0
25.840.3353.0
25.840.3453.0
25.840.3553.0
25.840.3653.0
25.840.3753.0
25.840.3853.0
25.840.3953.0
25.840.4053.0
25.840.4153.0
25.840.4253.0
25.840.4353.0
25.840.4453.0
25.840.4553.0
25.840.4653.0
25.840.0253.0
25.840.0353.0
25.840.0453.0
25.840.0553.0
25.840.0653.0
25.840.0753.0
25.840.0853.0
25.840.0953.0
25.840.1053.0
25.840.1153.0
25.840.1253.0
25.840.1353.0
25.840.1453.0
25.840.1553.0
25.840.1653.0
25.841.0253.0
25.841.0353.0
25.841.0453.0
25.841.0553.0
25.841.0653.0
25.841.0753.0
25.841.0853.0
25.841.0953.0
25.841.1053.0
25.841.1153.0
25.841.1253.0
25.841.1353.0
25.841.1453.0
25.841.1553.0
25.841.1653.0
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
22.54
27.54
32.54
37.54
42.54
47.54
52.54
57.54
62.54
67.54
72.54
77.54
82.54
87.54
92.54
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
22.70
27.78
32.86
37.94
43.02
48.10
53.18
58.26
63.34
68.42
73.50
78.58
83.66
88.74
93.82
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
81.28
5.08
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
1111
17 to 24 pole on request
17 to 24 pole on request
Pluggable PCB terminals – spring clamp system
pitch 5.00/5.08 mm
Box Qty GFL G T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 8113/8213 BFK Type 8113/8213 BFK .../F
Rated cross section*:
2.5 mm2
Rated current:
12 A
Wire range:
0.14 – 2.5 mm2single core/finely stranded
250 V/4 kV/3 – overvoltage category III
400 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
* When using ferrules for wire range 2.5 mm, only ferrules with
part number 2.5 mm 05.596.6127.0 should be used.
unmarked unmarked
17 to 24 pole on request
marked marked
unmarked unmarked
17 to 24 pole on request
marked marked
Pitch 5.00 mm
Pitch 5.08 mm
293
wiecon
No. 22 – 12 AWG 300 V 12 A
No. 22 – 12 AWG 300 V 12 A
q
cable size
2.5 mm2
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
25.857.3253.0
25.857.3353.0
25.857.3453.0
25.857.3553.0
25.857.3653.0
25.857.3753.0
25.857.3853.0
25.857.3953.0
25.857.4053.0
25.857.4153.0
25.857.4253.0
25.857.4353.0
25.857.4453.0
25.857.4553.0
25.857.4653.0
25.857.0253.0
25.857.0353.0
25.857.0453.0
25.857.0553.0
25.857.0653.0
25.857.0753.0
25.857.0853.0
25.857.0953.0
25.857.1053.0
25.857.1153.0
25.857.1253.0
25.857.1353.0
25.857.1453.0
25.857.1553.0
25.857.1653.0
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
81.28
5.08
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
100
5
DIN 5264 A 0.6 x 3.5
05.561.9153.0
06.502.4000.0
Pluggable PCB terminal - spring clamp system
pitch 5.08 mm
Box Qty G T Pole Part No. Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals in preparation
Type 8213 SUFK
Rated cross section*:
2.5 mm2
Rated current:
12 A
Wire range:
0.14 – 2.5 mm2single core/finely stranded
250 V/4 kV/3 – overvoltage category III
400 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
* When using ferrules for wire range 2.5 mm, only ferrules with
part number 2.5 mm 05.596.6127.0 should be used.
17 to 24 pole on request
unmarked
Pitch 5.08 mm marked
Coding part
(branch)
Screwdriver
Accessories:
11
wiecon
wiecon PCB
294
2
3
4
5
6
7
8
9
10
11
12
No. 22 – 12 AWG 300 V 12 A No. 22 – 12 AWG 300 V 12 A
11 11
100
100
50
50
50
50
50
50
50
50
50
25.880.0253.0
25.880.0353.0
25.880.0453.0
25.880.0553.0
25.880.0653.0
25.880.0753.0
25.880.0853.0
25.880.0953.0
25.880.1053.0
25.880.1153.0
25.880.1253.0
25.881.3253.0
25.881.3353.0
25.881.3453.0
25.881.3553.0
25.881.3653.0
25.881.3753.0
25.881.3853.0
25.881.3953.0
25.881.4053.0
25.881.4153.0
25.881.4253.0
25.881.0253.0
25.881.0353.0
25.881.0453.0
25.881.0553.0
25.881.0653.0
25.881.0753.0
25.881.0853.0
25.881.0953.0
25.881.1053.0
25.881.1153.0
25.881.1253.0
25.880.3253.0
25.880.3353.0
25.880.3453.0
25.880.3553.0
25.880.3653.0
25.880.3753.0
25.880.3853.0
25.880.3953.0
25.880.4053.0
25.880.4153.0
25.880.4253.0
13.12
20.74
28.36
35.98
43.60
51.22
58.84
66.46
74.08
81.70
89.32
25.66
33.28
40.90
48.52
56.14
63.76
71.38
79.00
86.62
94.24
101.86
7.62
15.24
22.86
30.48
38.10
45.72
53.34
60.96
68.58
76.20
83.82
Type 8413 BFK Type 8413 BFK/... F
VDE 0110
UL Da ta
CSA Data
Approvals
Pluggable PCB terminal - spring clamp system
pitch 7.62 mm
Rated cross section*:
2.5 mm2
Rated current:
12 A
Wire range:
0.14 – 2.5 mm2single core/finely stranded
400 V/6 kV/3 – overvoltage category III
** 690 V/6 kV/2 – overvoltage category II
1000 V/6 kV/1 – overvoltage category I
* When using ferrules for wire range 2.5 mm, only ferrules with
part number 05.596.6127.0 should be used.
** max. 600 V for non-earthed systems or expected overvoltage
≤3 kV for L ≥2.00 mm and ≤2.5 kV for 2.0 mm > L ≥1.5 mm
Box Qty GFL G T Pole Part No. Part No. Part No. Part No.
unmarked marked markedunmarked
Pitch 7.62 mm
295
wiecon
25.342.3253.0
25.342.3353.0
25.342.3453.0
25.342.3553.0
25.342.3653.0
25.342.3753.0
25.342.3853.0
25.342.3953.0
25.342.4053.0
25.342.4153.0
25.342.4253.0
25.342.4353.0
25.342.4453.0
25.342.4553.0
25.342.4653.0
25.343.3253.0
25.343.3353.0
25.343.3453.0
25.343.3553.0
25.343.3653.0
25.343.3753.0
25.343.3853.0
25.343.3953.0
25.343.4053.0
25.343.4153.0
25.343.4253.0
25.343.4353.0
25.343.4453.0
25.343.4553.0
25.343.4653.0
25.342.0253.0
25.342.0353.0
25.342.0453.0
25.342.0553.0
25.342.0653.0
25.342.0753.0
25.342.0853.0
25.342.0953.0
25.342.1053.0
25.342.1153.0
25.342.1253.0
25.342.1353.0
25.342.1453.0
25.342.1553.0
25.342.1653.0
25.343.0253.0
25.343.0353.0
25.343.0453.0
25.343.0553.0
25.343.0653.0
25.343.0753.0
25.343.0853.0
25.343.0953.0
25.343.1053.0
25.343.1153.0
25.343.1253.0
25.343.1353.0
25.343.1453.0
25.343.1553.0
25.343.1653.0
100
100
300 V 15 A
300 V 15 A
üiqwd
300 V 15 A
300 V 15 A
üiqwd
cable size
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
12.36
17.44
22.52
27.60
32.68
37.76
42.84
47.92
53.00
58.08
63.16
68.24
73.32
78.40
83.48
5.08
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
05.561.9153.0
Z5.523.7853.0
05.561.9153.0
Z5.523.7753.0
unmarked unmarkedmarked marked
Pluggable PCB terminal, inverted header, solder version
pitch 5.08 mm
Box Qty G T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 8213 BL/... G
Connection vertical to PCB
Type 8213 BL/... W
Connection vertical to PCB
Rated current:
12 A
250 V/4 kV/3 – overvoltage category III
*690 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
* max. 600V for non earthed systems or expected overvoltage
≤3 kV for L ≥2.00 mm and ≤2.5 kV for 2.0 mm > L ≥1.5 mm
17 to 24 pole on request
Pitch 5.08 mm
Coding part
(branch)
Mounting bracket
Accessories:
Solder pin 0.6 x 1 mm
Drill hole Ø 1.2 mm
Solder pin 0.6 x 1 mm
Drill hole Ø 1.2 mm
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
wiecon
No. 22 – 12 AWG 300 V 15 A
No. 22 – 12 AWG 300 V 15 A
üiqwd
No. 22 – 12 AWG 24 V 15 A
No. 22 – 12 AWG 24 V 15 A
üiqwd
25.230.3253.0
25.230.3353.0
25.230.3453.0
25.230.3553.0
25.230.3653.0
25.230.3753.0
25.230.3853.0
25.230.3953.0
25.230.4053.0
25.230.4153.0
25.230.4253.0
25.230.4353.0
25.230.4453.0
25.230.4553.0
25.230.4653.0
25.220.3253.0
25.220.3353.0
25.220.3453.0
25.220.3553.0
25.220.3653.0
25.220.3753.0
25.220.3853.0
25.220.3953.0
25.220.4053.0
25.220.4153.0
25.220.4253.0
25.220.4353.0
25.220.4453.0
25.220.4553.0
25.220.4653.0
250
250
200
200
200
100
100
100
100
100
100
50
50
50
50
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
25.240.3253.0
25.240.3353.0
25.240.3453.0
25.240.3553.0
25.240.3653.0
25.240.3753.0
25.240.3853.0
25.240.3953.0
25.240.4053.0
25.240.4153.0
25.240.4253.0
25.240.4353.0
25.240.4453.0
25.240.4553.0
25.240.4653.0
25.230.0253.0
25.230.0353.0
25.230.0453.0
25.230.0553.0
25.230.0653.0
25.230.0753.0
25.230.0853.0
25.230.0953.0
25.230.1053.0
25.230.1153.0
25.230.1253.0
25.230.1353.0
25.230.1453.0
25.230.1553.0
25.230.1653.0
25.220.0253.0
25.220.0353.0
25.220.0453.0
25.220.0553.0
25.220.0653.0
25.220.0753.0
25.220.0853.0
25.220.0953.0
25.220.1053.0
25.220.1153.0
25.220.1253.0
25.220.1353.0
25.220.1453.0
25.220.1553.0
25.220.1653.0
25.240.0253.0
25.240.0353.0
25.240.0453.0
25.240.0553.0
25.240.0653.0
25.240.0753.0
25.240.0853.0
25.240.0953.0
25.240.1053.0
25.240.1153.0
25.240.1253.0
25.240.1353.0
25.240.1453.0
25.240.1553.0
25.240.1653.0
250
250
200
200
200
100
100
100
100
100
100
50
50
50
50
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
81.28
5.08
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
9.5
M 2.5
9.5
M 2.5
wiecon PCB
296
117 to 24 pole on request
Pluggable PCB terminals, TOP connection system
pitch 5.00/5.08 mm
Box Qty TOP G T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 8113 B/... TOP, 8213 B/... TOP
Connection in line with conductor
Type 8113 B/... TOP LED
Connection in line with conductor
unmarked unmarked
Pitch 5.00 mm
Rated cross section:
2.5 mm2
Rated current:
12 A, On state current 2.2 mA per LED
Rated voltages:
Type 8113 B/... TOP, 8213 B/... TOP
250 V/4 kV/3 – overvoltage category III
400 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
Type 8113 B/... TOP LED
24 V/4 kV/3 – overvoltage category III
24 V/4 kV/2 – overvoltage category II
24 V/4 kV/1 – overvoltage category I
Wire range:
0.14 – 2.5 mm2single core/finely stranded
17 to 24 pole on request
unmarked
Pitch 5.08 mm
marked marked
marked
TOP connector
with LED
common
negative pole
99.232.9996.1
99.233.9996.1
99.234.9996.1
99.235.9996.1
99.236.9996.1
99.237.9996.1
99.238.9996.1
99.239.9996.1
99.240.9996.1
99.241.9996.1
99.242.9996.1
99.243.9996.1
99.244.9996.1
99.245.9996.1
99.246.9996.1
wieconwiecon
297
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
99.202.9996.0
99.203.9996.0
99.204.9996.0
99.205.9996.0
99.206.9996.0
99.207.9996.0
99.208.9996.0
99.209.9996.0
99.210.9996.0
99.211.9996.0
99.212.9996.0
99.213.9996.0
99.214.9996.0
99.215.9996.0
99.216.9996.0
25.330.3253.0
25.330.3353.0
25.330.3453.0
25.330.3553.0
25.330.3653.0
25.330.3753.0
25.330.3853.0
25.330.3953.0
25.330.4053.0
25.330.4153.0
25.330.4253.0
25.330.4353.0
25.330.4453.0
25.330.4553.0
25.330.4653.0
25.350.3253.0
25.350.3353.0
25.350.3453.0
25.350.3553.0
25.350.3653.0
25.350.3753.0
25.350.3853.0
25.350.3953.0
25.350.4053.0
25.350.4153.0
25.350.4253.0
25.350.4353.0
25.350.4453.0
25.350.4553.0
25.350.4653.0
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
70.12
75.20
80.28
5.08
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
100
100
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
300 V 15 A
300 V 15 A
üiqwd
300 V 15 A
300 V 15 A
üiqwd
cable size
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
81.28
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
11.56
16.64
21.72
26.80
31.88
36.96
42.04
47.12
52.20
57.28
62.36
67.44
72.52
77.60
82.68
5.08
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
05.561.0053.0
Z5.523.2453.0
05.561.0053.0
17 to 24 pole on request
unmarked unmarked
17 to 24 pole on request
unmarked unmarked
17 to 24 pole on request
PCB headers
pitch 5.00/5.08 mm
Box Qty G T Pole Part No. G T Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 8113 S/... G, 8213 S/... G
Connection vertical to PCB
Type 8113 S/... GOF, 8213 S/... GOF
Connection vertical to PCB
Pitch 5.00 mm
Rated current:
12 A
250 V/4 kV/3 – overvoltage category III
400 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
17 to 24 pole on request
Pitch 5.08 mm
Coding part (branch)
Mounting bracket assembly - for double ended
screw fixing of header
Accessories:
closed version open version
Solder pin 1 x 1 mm
Drill hole Ø 1.4 mm
Solder pin 1 x 1 mm
Drill hole Ø 1.4 mm
25.359.3253.0
25.359.3353.0
25.359.3453.0
25.359.3553.0
25.359.3653.0
25.359.3753.0
25.359.3853.0
25.359.3953.0
25.359.4053.0
25.359.4153.0
25.359.4253.0
25.359.4353.0
25.359.4453.0
25.359.4553.0
25.359.4653.0
25.352.3253.0
25.352.3353.0
25.352.3453.0
25.352.3553.0
25.352.3653.0
25.352.3753.0
25.352.3853.0
25.352.3953.0
25.352.4053.0
25.352.4153.0
25.352.4253.0
25.352.4353.0
25.352.4453.0
25.352.4553.0
25.352.4653.0
25.332.3253.0
25.332.3353.0
25.332.3453.0
25.332.3553.0
25.332.3653.0
25.332.3753.0
25.332.3853.0
25.332.3953.0
25.332.4053.0
25.332.4153.0
25.332.4253.0
25.332.4353.0
25.332.4453.0
25.332.4553.0
25.332.4653.0
25.338.3253.0
25.338.3353.0
25.338.3453.0
25.338.3553.0
25.338.3653.0
25.338.3753.0
25.338.3853.0
25.338.3953.0
25.338.4053.0
25.338.4153.0
25.338.4253.0
25.338.4353.0
25.338.4453.0
25.338.4553.0
25.338.4653.0
wiecon
wiecon PCB
298
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
300 V 15 A
300 V 15 A
üiqwd
300 V 15 A
300 V 15 A
üiqwd
11.40
16.40
21.40
26.40
31.40
36.40
41.40
46.40
51.40
56.40
61.40
66.40
71.40
76.40
81.40
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
11.56
16.64
21.72
26.80
31.88
36.96
42.04
47.12
52.20
57.28
62.36
67.44
72.52
77.60
82.68
5.08
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
81.28
86.36
91.44
5.08
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
cable size
100
100
05.561.0053.0
Z5.523.2453.0
05.561.0053.0
Z5.523.2453.0
17 to 22 pole on request 17 to 24 pole on request
17 to 24 pole on request
17 to 22 pole on request
PCB headers
pitch 5.00/5.08 mm
Box Qty G T Pole Part No. GFL T Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 8113 S/... GF, 8213 S/... GF
Connection vertical to PCB
Type 8113 S/... W, 8213 S/... W
Connection horizontal to PCB
unmarked unmarked
Pitch 5.00 mm
Rated current:
12 A
Rated voltages:
250 V/4 kV/3 – overvoltage category III
400 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
unmarked
Pitch 5.08 mm unmarked
Coding part (branch)
Mounting bracket assembly - for double
ended screw fixing of header
Accessories:
with screw flange closed version
Solder pin 1 x 1 mm
Drill hole Ø 1.4 mm
Solder pin 1 x 1 mm
Drill hole Ø 1.4 mm
25.339.3253.0
25.339.3353.0
25.339.3453.0
25.339.3553.0
25.339.3653.0
25.339.3753.0
25.339.3853.0
25.339.3953.0
25.339.4053.0
25.339.4153.0
25.339.4253.0
25.339.4353.0
25.339.4453.0
25.339.4553.0
25.339.4653.0
25.358.3253.0
25.358.3353.0
25.358.3453.0
25.358.3553.0
25.358.3653.0
25.358.3753.0
25.358.3853.0
25.358.3953.0
25.358.4053.0
25.358.4153.0
25.358.4253.0
25.358.4353.0
25.358.4453.0
25.358.4553.0
25.358.4653.0
wiecon
299
wiecon
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
11.56
16.64
21.72
26.80
31.88
36.96
42.04
47.12
52.20
57.28
62.36
67.44
72.52
77.60
82.68
5.08
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
99.262.9996.0
99.263.9996.0
99.264.9996.0
99.265.9996.0
99.266.9996.0
99.267.9996.0
99.268.9996.0
99.269.9996.0
99.270.9996.0
99.271.9996.0
99.272.9996.0
99.273.9996.0
99.274.9996.0
99.275.9996.0
99.276.9996.0
11.40
16.40
21.40
26.40
31.40
36.40
41.40
46.40
51.40
56.40
61.40
66.40
71.40
76.40
81.40
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
99.202.9996.2
99.203.9996.2
99.204.9996.2
99.205.9996.2
99.206.9996.2
99.207.9996.2
99.208.9996.2
99.209.9996.2
99.210.9996.2
99.211.9996.2
99.212.9996.2
99.213.9996.2
99.214.9996.2
99.215.9996.2
99.216.9996.2
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
81.28
86.36
91.44
5.08
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
81.28
100
100
300 V 15 A
300 V 15 A
iqwd
T
300 V 15 A
300 V 15 A
üiqwd
cable size
05.561.0053.0
Z5.523.2453.0
05.561.0053.0
17 to 22 pole on request
17 to 22 pole on request
17 to 24 pole on request
unmarked unmarked
Pitch 5.00 mm
17 to 24 pole on request
unmarked
Pitch 5.08 mm unmarked
PCB header
pitch 5.00/5.08 mm
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 8113 S/... WOF, 8213 S/... WOF
Connection horizontal to PCB
Type 8113 S/... WF, 8213 S/... WF
Connection horizontal to PCB
Rated current:
12 A
250 V/4 kV/3 – overvoltage category III
400 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
Coding part (branch)
Mounting bracket assembly - for double ended
screw fixing of header
Accessories:
open version with screw flange
Solder pin 1 x 1 mm
Drill hole Ø 1.4 mm Solder pin 1 x 1 mm
Drill hole Ø 1.4 mm
Box Qty G T Pole Part No. GFL G T Part No.
wiecon
wiecon PCB
300
300 V 15 A
300 V 15 A
üiqwd
300 V 15 A
300 V 15 A
üiqwd
100
100
cable size
25.54
33.04
40.54
48.04
55.54
63.04
70.54
78.04
85.54
93.04
100.54
7.50
15.00
22.50
30.00
37.50
45.00
52.50
60.00
67.50
75.00
82.50
25.374.6253.0
25.374.6353.0
25.374.6453.0
25.374.6553.0
25.374.6653.0
25.374.6753.0
25.374.6853.0
25.374.6953.0
25.374.7053.0
25.374.7153.0
25.374.7253.0
25.370.3253.0
25.370.3353.0
25.370.3453.0
25.370.3553.0
25.370.3653.0
25.370.3753.0
25.370.3853.0
25.370.3953.0
25.370.4053.0
25.370.4153.0
25.370.4253.0
100
100
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
14.20
21.70
29.20
36.70
44.20
51.70
59.20
66.70
74.20
81.70
89.20
7.50
15.00
22.50
30.00
37.50
45.00
52.50
60.00
67.50
75.00
82.50
25.390.3253.0
25.390.3353.0
25.390.3453.0
25.390.3553.0
25.390.3653.0
25.390.3753.0
25.390.3853.0
25.390.3953.0
25.390.4053.0
25.390.4153.0
25.390.4253.0
25.398.6253.0
25.398.6353.0
25.398.6453.0
25.398.6553.0
25.398.6653.0
25.398.6753.0
25.398.6853.0
25.398.6953.0
25.398.7053.0
25.398.7153.0
25.398.7253.0
25.66
33.25
40.90
48.52
56.14
63.76
71.38
79.00
86.62
94.24
101.86
7.62
15.24
22.86
30.48
38.10
45.72
53.34
60.64
68.58
76.20
83.82
100
100
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
14.32
21.94
29.56
37.18
44.80
52.42
60.04
67.66
75.28
82.90
90.52
7.62
15.24
22.86
30.48
38.10
45.72
53.34
60.64
68.58
76.20
83.82
05.561.0053.0
Z5.523.2453.0
05.561.0053.0
PCB headers
pitch 7.50/7.62 mm
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 8313 S/... G, 8413 S/... G
Connection vertical to PCB
Type 8313 S/... GF, 8413 S/... GF
Connection vertical to PCB
Rated current:
12 A
250 V/4 kV/3 – overvoltage category III
400 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
Box Qty G T Pole Part No. GFL T Part No.
Pitch 7.50 mm unmarked unmarked
unmarked unmarked
Pitch 7.62 mm
Coding part (branch)
Mounting bracket assembly - for double
ended screw fixing of header
Accessories:
closed version with screw flange
Solder pin 1 x 1 mm
Drill hole Ø 1.4 mm
Solder pin 1 x 1 mm
Drill hole Ø 1.4 mm
25.398.2253.0
25.398.2353.0
25.398.2453.0
25.398.2553.0
25.398.2653.0
25.398.2753.0
25.398.2853.0
25.398.2953.0
25.398.3053.0
25.398.3153.0
25.398.3253.0
301
wiecon
25.54
33.04
40.54
48.04
55.54
63.04
70.54
78.04
85.54
93.04
100.54
7.50
15.00
22.50
30.00
37.50
45.00
52.50
60.00
67.50
75.00
82.50
25.374.2253.0
25.374.2353.0
25.374.2453.0
25.374.2553.0
25.374.2653.0
25.374.2753.0
25.374.2853.0
25.374.2953.0
25.374.3053.0
25.374.3153.0
25.374.3253.0
25.372.3253.0
25.372.3353.0
25.372.3453.0
25.372.3553.0
25.372.3653.0
25.372.3753.0
25.372.3853.0
25.372.3953.0
25.372.4053.0
25.372.4153.0
25.372.4253.0
25.392.3253.0
25.392.3353.0
25.392.3453.0
25.392.3553.0
25.392.3653.0
25.392.3753.0
25.392.3853.0
25.392.3953.0
25.392.4053.0
25.392.4153.0
25.392.4253.0
25.66
33.25
40.90
48.52
56.14
63.76
71.38
79.00
86.62
94.24
101.86
7.62
15.24
22.86
30.48
38.10
45.72
53.34
60.64
68.58
76.20
83.82
100
100
100
100
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
300 V 15 A
300 V 15 A
üiqwd
300 V 15 A
300 V 15 A
üiqwd
cable size
14.40
21.90
29.40
36.90
44.40
51.90
59.40
66.90
74.40
81.90
89.40
7.50
15.00
22.50
30.00
37.50
45.00
52.50
60.00
67.50
75.00
82.50
100
100
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
14.52
22.14
29.76
37.38
45.00
52.62
60.24
67.86
75.48
83.10
90.72
7.62
15.24
22.86
30.48
38.10
45.72
53.34
60.64
68.58
76.20
83.82
05.561.0053.0
Z5.523.2453.0
05.561.0053.0
PCB headers
pitch 7.50/7.62 mm
unmarked unmarked
unmarked unmarked
Box Qty G T Pole Part No. GFL T Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 8313 S/... W, 8413 S/... W
Connection horizontal to PCB
Type 8313 S/... WF, 8413 S/... WF
Connection horizontal to PCB
Pitch 7.50 mm
Rated current:
12 A
400 V/6 kV/3 – overvoltage category III
690 V/6 kV/2 – overvoltage category II
1000 V/6 kV/1 – overvoltage category I
Pitch 7.62 mm
Coding part (branch)
Mounting bracket assembly - for double ended
screw fixing of header
Accessories:
closed version with screw flange
Solder pin 1 x 1 mm
Drill hole Ø 1.4 mm
Solder pin 1 x 1 mm
Drill hole Ø 1.4 mm
wiecon
wiecon PCB
302
300 V 15 A
300 V 15 A
üiqwd
300 V 15 A
300 V 15 A
üiqwd
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
25.396.3253.0
25.396.3353.0
25.396.3453.0
25.396.3553.0
25.396.3653.0
25.396.3753.0
25.396.3853.0
25.396.3953.0
25.396.4053.0
25.396.4153.0
25.396.4253.0
25.396.4353.0
25.396.4453.0
25.396.4553.0
25.396.4653.0
11.36
16.44
21.52
26.60
31.68
36.76
41.84
46.92
52.00
57.08
62.19
67.24
72.32
77.40
82.48
5.08
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
25.397.3253.0
25.397.3353.0
25.397.3453.0
25.397.3553.0
25.397.3653.0
25.397.3753.0
25.397.3853.0
25.397.3953.0
25.397.4053.0
25.397.4153.0
25.397.4253.0
25.397.4353.0
25.397.4453.0
25.397.4553.0
25.397.4653.0
9.76
14.84
19.92
25.00
30.08
35.16
40.24
45.32
50.40
55.48
60.56
65.64
70.72
75.80
80.88
5.08
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
9.60
14.60
19.60
24.60
29.60
34.60
39.60
44.60
49.60
54.60
59.60
64.60
69.60
74.60
79.60
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
25.395.3253.0
25.395.3353.0
25.395.3453.0
25.395.3553.0
25.395.3653.0
25.395.3753.0
25.395.3853.0
25.395.3953.0
25.395.4053.0
25.395.4153.0
25.395.4253.0
25.395.4353.0
25.395.4453.0
25.395.4553.0
25.395.4653.0
25.394.3253.0
25.394.3353.0
25.394.3453.0
25.394.3553.0
25.394.3653.0
25.394.3753.0
25.394.3853.0
25.394.3953.0
25.394.4053.0
25.394.4153.0
25.394.4253.0
25.394.4353.0
25.394.4453.0
25.394.4553.0
25.394.4653.0
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
cable size
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
11.20
16.20
21.20
26.20
31.20
36.20
41.20
46.20
51.20
56.20
61.20
66.20
71.20
76.20
81.20
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
100 05.561.0053.0 05.561.0053.0
PCB headers
pitch 5.00/5.08 mm
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 8113 S/... S, 8213 S/... S
Connection at 45° to PCB
Type 8113 S/... S1, 8213 S/... S1
Connection at 45° to PCB
unmarked unmarked
Pitch 5.00 mm
Rated current:
12 A
250 V/4 kV/3 – overvoltage category III
400 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
17 to 24 pole on request
unmarked
Pitch 5.08 mm unmarked
Box Qty G T Pole Part No. G T Part No.
17 to 24 pole on request
Pitch 5.00 mm
Coding part (branch)
Accessories:
closed version open version
Solder pin 1 x 1 mm
Drill hole Ø 1.4 mm
Solder pin 1 x 1 mm
Drill hole Ø 1.4 mm
Larger pole numbers can be
achieved by latching together
2 x 2
2 x 3
wiecon
303
25.336.3253.0
25.336.3353.0
25.334.3253.0
25.334.3353.0
25.354.3253.0
25.354.3353.0
25.356.3253.0
25.356.3353.0
50
100
100
300 V 15 A
300 V 10 A
iqwd
300 V 15 A
300 V 10 A
iqwd
5
10
100
100
2 x 2
2 x 3
5.08
10.16
07.310.9853.0 07.310.9853.0
unmarked unmarked
unmarked unmarked
PCB headers
pitch 5.00/5.08 mm
Box Qty T Pole Part No. Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 8113 SE/... G, 8213 SE/... G
Connection vertical to PCB
Type 8113 SE/... W, 8213 SE/... W
Connection horizontal to PCB
Pitch 5.00 mm
Rated current:
10 A
250 V/4 kV/3 – overvoltage category III
400 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
Larger pole numbers can be
achieved by latching together
Pitch 5.08 mm
End plate
Mounting bracket assembly - for double
ended screw fixing of header
Accessories:
on request
Only in connection with end plate 07.310.9853.0
Z5.523.2453.0
Solder pin 1 x 1 mm
Drill hole Ø 1.4 mm
Solder pin 1 x 1 mm
Drill hole Ø 1.4 mm
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
wiecon
wiecon PCB
304
300 V 10 A
300 V 10 A
qw
300 V 10 A
300 V 10 A
qw
12
17
22
27
32
37
42
47
52
57
62
67
72
77
82
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
27.356.0253.0
27.356.0353.0
27.356.0453.0
27.356.0553.0
27.356.0653.0
27.356.0753.0
27.356.0853.0
27.356.0953.0
27.356.1053.0
27.356.1153.0
27.356.1253.0
27.356.1353.0
27.356.1453.0
27.356.1553.0
27.356.1653.0
27.354.0253.0
27.354.0353.0
27.354.0453.0
27.354.0553.0
27.354.0653.0
27.354.0753.0
27.354.0853.0
27.354.0953.0
27.354.1053.0
27.354.1153.0
27.354.1253.0
27.354.1353.0
27.354.1453.0
27.354.1553.0
27.354.1653.0
27.334.0253.0
27.334.0353.0
27.334.0453.0
27.334.0553.0
27.334.0653.0
27.334.0753.0
27.334.0853.0
27.334.0953.0
27.334.1053.0
27.334.1153.0
27.334.1253.0
27.334.1353.0
27.334.1453.0
27.334.1553.0
27.334.1653.0
27.336.0253.0
27.336.0353.0
27.336.0453.0
27.336.0553.0
27.336.0653.0
27.336.0753.0
27.336.0853.0
27.336.0953.0
27.336.1053.0
27.336.1153.0
27.336.1253.0
27.336.1353.0
27.336.1453.0
27.336.1553.0
27.336.1653.0
12.16
17.24
22.32
27.40
32.48
37.56
42.64
47.72
52.80
57.88
62.96
68.04
73.12
78.20
83.28
5.08
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
1 to 24 pole on request
PCB Headers
pitch 5.00/5.08 mm
Box Qty G T Pole Part No. Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 81-8213 SEG .../G Type 81-8213 SEG .../W
unmarked unmarked
Pitch 5.00 mm
Rated current: 10 A
250 V/4 kV/3 – overvoltage category III
400 V/4 kV/2 – overvoltage category III
400 V/4 kV/2 – overvoltage category II
1 to 24 pole on request
unmarked unmarked
Pitch 5.08 mm
Solder pin 1 x 1 mm
Drill hole Ø 1.3 mm
Solder pin 1 x 1 mm
Drill hole Ø 1.3 mm
G
T
28,5
22
3,2
5,00
5,08
20,00
20,32
5,00
5,08
10,00
10,16
8213 SEG
>PBT<
G
T22
28,5
3,2
Coding available on request Coding available on request
kodierbar
305
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
wiecon
No. 22 – 12 AWG 300 V 6.5 A
No. 22 – 12 AWG 300 V 6.5 A
iqwd
No. 22 – 12 AWG 300 V 12/8 A
No. 22 – 12 AWG 300 V 12/8 A
iqwd
25.313.0253.0
25.313.0353.0
25.313.0453.0
25.313.0553.0
25.313.0653.0
25.313.0753.0
25.313.0853.0
25.313.0953.0
25.313.1053.0
25.313.1153.0
25.313.1253.0
25.313.1353.0
25.313.1453.0
25.313.1553.0
25.313.1653.0
25.303.3253.0
25.303.3353.0
25.303.3453.0
25.303.3553.0
25.303.3653.0
25.303.3753.0
25.303.3853.0
25.303.3953.0
25.303.4053.0
25.303.4153.0
25.303.4253.0
25.303.4353.0
25.303.4453.0
25.303.4553.0
25.303.4653.0
25.313.3253.0
25.313.3353.0
25.313.3453.0
25.313.3553.0
25.313.3653.0
25.313.3753.0
25.313.3853.0
25.313.3953.0
25.313.4053.0
25.313.4153.0
25.313.4253.0
25.313.4353.0
25.313.4453.0
25.313.4553.0
25.313.4653.0
25.303.0253.0
25.303.0353.0
25.303.0453.0
25.303.0553.0
25.303.0653.0
25.303.0753.0
25.303.0853.0
25.303.0953.0
25.303.1053.0
25.303.1153.0
25.303.1253.0
25.303.1353.0
25.303.1453.0
25.303.1553.0
25.303.1653.0
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
81.28
86.36
91.44
96.52
101.60
5.08
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
13.18
18.26
23.34
28.42
33.50
38.58
43.66
48.74
53.82
58.90
68.98
69.06
74.14
79.22
84.30
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.08
60.96
66.04
71.12
76.20
81.28
86.36
91.44
100
100
05.561.0053.0
Z6.012.0812.0
05.561.0053.0
Z6.012.0812.0
a b
17 to 22 pole on request
1 to 24 pole on request
Headers for panel mounting,
pitch 5.08 mm
Box Qty G T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 8213 S/... DFWW,
8213 S/... DFWW M
Type 8213 S/... DFLS,
8213 S/... DFLS M
unmarked unmarked unmarkedunmarked
Pitch 5.08 mm
Dimensions for panel cut out
with solder connectionWire-Wrap
Wire wrap connection 1 x 1
Max. diameter of interconnecting wire Ø: 0.8 mm
Rated current: 6.5 A
Solder connection
Rated cross section
1.5 mm2 single core/
1.0 mm2 finely stranded
Rated current: 12 A
Plug connection 2.8 x 0.8 DIN 46249
Rated cross section
1.0 mm2 finely stranded
Rated current: 8 A
250 V/4 kV/3 – overvoltage category III
400 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
with press in nut for
screw flange without press in nut with press in nut for
screw flange
without press in nut
Coding part (branch)
Screw assembly
Accessories:
a b
cable size
wiecon
wiecon PCB
306
Z5.523.2453.0
8113 – 8413/8813 8213 BL
100
07.310.9853.0 50
05.561.0053.0 a 100
05.561.9153.0 100
AB
8113 6.3 5.00
8213 6.8 5.08
AB
8113 5.1 5.00
8213 5.2 5.08
8313 5.4 7.50
8413 5.4 7.62
Z5.523.7753.0 100
Z5.523.7853.0 100
Coding branch for
– header (Type 8113 –
8413, Type 8813)
Accessories for
8113 – 8413/8813 and 8213 BL
Part No. Box Qty Part No. Box Qty
Drilling plan for mounting bracket Z5.523.2453.0
Type 8113 SE/... and 8213 SE/...
Drilling plan for mounting bracket Z5.523.2453.0
Type 81 – 8413 S/...
End plate for two tier
header
(Type 8113 – 8213 SE)
Adhesive marking strips for socket connectors and
headers with 5/5.08 mm pitch
Mounting bracket
1 – 12 04.007.4089.0 1
13 – 24 04.007.4189.0 1
25 – 36 04.007.4289.0 1
37 – 68 04.007.4389.0 1
49 – 60 04.007.4489.0 1
61 – 72 04.007.4589.0 1
73 – 84 04.007.4689.0 1
85 – 96 04.007.4789.0 1
97 – 108 04.007.4889.0 1
Mounting bracket assembly for headers Mounting bracket assembly with end plate for
two tier headers
– socket connector
(Type 8113 – 8413)
Mounting bracket (Type 8113 – 8413)
307
wiecon
wiecon
wiecon PCB
308
0.13 – 2.5 mm
2
0.13 – 4 mm
2
250 V/4 kV/3 16
No. 22 – 12 AWG 300 15
No. 24 – 12 AWG 300 15
5 mm 11 mm
qw
0.13 – 2.5 mm
2
0.13 – 4 mm
2
250 V/4 kV/3 16
No. 22 – 12 AWG 300
No. 24 – 12 AWG 300
5 mm 11 mm
qw
WKF 2,5 D2/8113/35 56.703.2053.0 100
WKF 2,5 D2/8113/35 BLAU
56.703.2053.6 100
35x 27 x7,5 EN 60715 98.300.0000.0 1
35x 24 x15 EN 60715 98.360.0000.0 1
9708/2 S35 Z5.522.8553.0 100
WEF 1/35 Z5.523.9353.0 100
APF 2,5/D2/8113 07.312.4153.0 10
APF 2,5/D2/8113 07.312.4153.6 10
IVB WKF 2,5 – 2 Z7.280.6227.0 10
IVB WKF 2,5 – 3 Z7.280.6327.0 10
IVB WKF 2,5 – 4 Z7.280.6427.0 10
IVB WKF 2,5 – 5 Z7.280.6527.0 10
IVB WKF 2,5 – 6 Z7.280.6627.0 10
IVB WKF 2,5 – 7 Z7.280.6727.0 20
IVB WKF 2,5 – 8 Z7.280.6827.0 20
IVB WKF 2,5 – 9 Z7.280.6927.0 20
IVB WKF 2,5 – 10 Z7.280.7027.0 20
LEL 2,5/1 WEISS 05.561.6553.0 100
LEL 2,5/2 GRAU 05.561.6653.0 100
LEL 2,5/3 SCHWARZ 05.561.6753.0 100
ADF 2,5/4 GELB 04.343.6053.8 10
AD 8113/4 GELB 04.343.6853.8 10
DIN 5264 B 0,6x3,5 06.502.4000.0 5
05.561.0053.0 100
WKF 2,5 D2/8113 SL/35 56.703.9253.0 100
35x 27 x7,5 EN 60715 98.300.0000.0 1
35x 24 x15 EN 60715 98.360.0000.0 1
9708/2 S35 Z5.522.8553.0 100
WEF 1/35 Z5.523.9353.0 100
APF 2,5/D2/8113 07.312.4153.0 10
LEL 2,5/1 WEISS 05.561.6553.0 100
LEL 2,5/2 GRAU 05.561.6653.0 100
LEL 2,5/3 SCHWARZ 05.561.6753.0 100
ADF 2,5/4 GELB 04.343.6053.8 10
AD 8113/4 GELB 04.343.6853.8 10
DIN 5264 B 0,6x 3,5 06.502.4000.0 5
05.561.0053.0 100
Duo modular terminals, spring clamp with headers
for pluggable PCB terminals
WKF 2.5 D2/8113/35
finely stranded single core V A
WKF 2.5 D2/8113 SL/35
finely stranded single core V A
EN 60 947-7-1/DIN VDE 0611 T1
UL Data field/factory wiring
CSA Data
Width stripping length
Approvals
Type Part No. Box Qty Type Part No. Box Qty
Duo modular terminal Colour: grey
Colour: blue
Duo earth terminal Colour: yellow/green
Double deck terminal Colour: grey
Accessories
1. Mounting rail 35, DIN rail 7.5 high L = 2 m
Mounting rail 35, DIN rail 15 high L = 2 m
2. End clamp TS 35, with screw 8 mm wide
End clamp TS 35, screwless 8 mm wide
3. End plate Colour: grey
Colour: blue
4. Partition plate Colour: grey
Colour: blue
5. Jumper bar 2 pole
insulated 3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
6. Conductor entry strip 0.13 – 0.2 mm2
0.25 – 0.5 mm2
0.75 – 1.0 mm2
7. Cover with warning symbol for 4 terminals
Pin cover with warning symbol for 4 pole
8. Screwdriver, uninsulated
9. Coding part (branch)
10. Labelling systems See page 36 of fasis See page 36 of fasis
Please see note on page 36 on fasis!
For PCB terminals 8113 BFK
wiecon
309
WKF 1,5 E/8113/35 56.702.2053.0 100
35x 27 x7,5 EN 60715 98.300.0000.0 1
35x 24 x15 EN 60715 98.360.0000.0 1
9708/2 S35 Z5.522.8553.0 100
WEF 1/35 Z5.523.9353.0 100
APF 1,5/E/8113 07.312.4753.0 10
IVB WKF 2,5 – 2 Z7.280.6227.0 10
IVB WKF 2,5 – 3 Z7.280.6327.0 10
IVB WKF 2,5 – 4 Z7.280.6427.0 10
IVB WKF 2,5 – 5 Z7.280.6527.0 10
IVB WKF 2,5 – 6 Z7.280.6627.0 10
IVB WKF 2,5 – 7 Z7.280.6727.0 20
IVB WKF 2,5 – 8 Z7.280.6827.0 20
IVB WKF 2,5 – 9 Z7.280.6927.0 20
IVB WKF 2,5 – 10 Z7.280.7027.0 20
LEL 1,5/1 WEISS 05.562.2453.0 100
LEL 1,5/2 GRAU 05.562.2553.0 100
LEL 1,5/3 SCHWARZ 05.562.2653.0 100
ADF 2,5/4 GELB 04.343.6053.8 10
AD 8113/4 GELB 04.343.6853.8 10
DIN 5264 B 0,6x 3,5 06.502.4000.0 5
05.561.0053.0 100
0.13 – 1.5 mm
2
0.13 – 2.5 mm
2
250 V/4 kV/3
16
No. 22 – 14
No. 24 – 14
5 mm 11 mm
100
5
DIN 5264 B 0.6 x 3.5
05.561.9153.0
06.502.4000.0
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
11 mm 9 mm
No. 22 – 12 AWG 300 V 12 A
No. 22 – 12 AWG 300 V 12 A
q
25.820.3253.0
25.820.3353.0
25.820.3453.0
25.820.3553.0
25.820.3653.0
25.820.3753.0
25.820.3853.0
25.820.3953.0
25.820.4053.0
25.820.4153.0
25.820.4253.0
25.820.4353.0
25.820.4453.0
25.820.4553.0
25.820.4653.0
25.820.0253.0
25.820.0353.0
25.820.0453.0
25.820.0553.0
25.820.0653.0
25.820.0753.0
25.820.0853.0
25.820.0953.0
25.820.1053.0
25.820.1153.0
25.820.1253.0
25.820.1353.0
25.820.1453.0
25.820.1553.0
25.820.1653.0
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
11
Type Part No. Box Qty
See page 37 of fasis
WKF 1.5 E/8113/35
finely stranded single core V A
Coding branch
(branch)
Screwdriver
1 to 24 pole on request
PCB terminal – pluggable spring clamp system
pitch 5.00 mm
Box Qty G T Pole Part No. Part No.
Rated voltages VDE 0110
EN 60 947-7-1/DIN VDE 0611 T1
Pitch stripping length
UL Da ta
CSA Data
Approvals in preparation
Type 8113 BFK
0.13–2.5 mm
2
finely stranded 0.13–4 mm
2
single core
unmarked
Pitch 5.00 mm
Rated current:
12 A
250 V/4 kV/3 – overvoltage category III
400 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
when using ferrules for wire range 2.5 mm2, use only
ferrules with part number 05.596.6127.0
See pages 796 to 797 facts & DATA
marked
Accessories:
WK 2.5 U / 8113 S/V / LED 25
finely stranded single core V A
wiecon
wiecon PCB
0.5 – 2.5 mm
2
0.5 – 4 mm
2
250 V/4 kV/3 12
No. 22 – 12 AWG 300 V 15
No. 24 – 12 AWG 300 V 15
5 mm 9 mm
qw
0.5 – 2.5 mm
2
0.5 – 4 mm
21)
12
No. 22 – 12 AWG 300 V 15
No. 24 – 12 AWG 25 V 15
5 mm 9 mm
qw
310
WK 2,5 U/8113 S/V...***)
AP 2,5 U/8113 S/V ***)
AP 2,5 U/8113 ***)
ZP 2,5 U/8113 S/V
IVB WK 2,5-2
IVB WK 2,5-3
IVB WK 2,5-12
ADVB 2,5 GELB
TS 2,5 GELB
57.503.2655.6
07.312.1555.0
07.312.4655.0
07.312.1655.0
Z7.280.2227.0
Z7.280.2327.0
Z7.280.3227.0
05.561.4125.0
04.326.2053.0
04.343.9056.0
04.343.9156.0
07.311.2053.0
05.561.0053.0
50
10
10
10
10
10
10
1
50
10
10
10
10
10
10
1
100
WK 2,5 U/8113 S/V/LED 25
***)
AP 2,5 U/8113 S/V ***)
AP 2,5 U/8113 ***)
ZP 2,5 U/8113 S/V
IVB WK 2,5-2
IVB WK 2,5-3
IVB WK 2,5-12
ADVB 2,5 GELB
TS 2,5 GELB
57.503.2755.0
07.312.1555.0
07.312.4655.0
07.312.1655.0
Z7.280.2227.0
Z7.280.2327.0
Z7.280.3227.0
05.561.4125.0
04.326.2053.0
04.343.9056.0
04.343.9156.0
07.311.2053.0
05.561.0053.0
Modular terminals, rising cage clamp with headers
for pluggable PCB terminals
Type Part No. Box Qty Type Part No. Box Qty
EN 60 947-7-1/DIN VDE 0611 T1
UL Da ta
CSA Data
Width stripping length
Approvals
WK 2.5 U / 8113 S/V
finely stranded single core V A
for PCB terminals:
– Type 8113 B
– Type 8113 BFK
– Type 8313 B
– Type 8113 B/VL
– Type 8113 B/VR
– Type 8113 B/Top
The items marked with ***) have insulating housing in
accordance with UL 94-V0 (flammability class)
Indicator: R = 4.7 K; 0.5 W
LED colour: red
1) determined by LED at terminal
Modular terminal Colour: grey
Modular terminal with LED 25 V Colour: grey
Modular terminal with LED 50 V Colour: grey
Supply terminal Colour: blue
Modular terminal with header
PCB terminals type 8113 see page 297
Accessories
Mounting rail 35 DIN rail 7.5 mm high L = 2 m
Mounting rail 35 DIN rail 15 mm high L = 2 m
Mounting rail 32 G-rail L = 2 m
End clamp with U-foot 10 mm wide
End clamp TS 35 with screw 8 mm wide
End clamp TS 32 with screw 7.5 mm wide
End plate right 2.5 mm thick Colour: grey
End plate links 2.5 mm thick Colour: grey
End plate 2.5 mm thick Colour: blue
Right intermediate plate 2.5 mm thick Colour: grey
Intermediate plate 2.5 mm thick Colour: blue
(for use of PCB terminals with 7.5 mm)
Jumper bar with screws, E-Cu insulated
2 pole
3 pole
up to 12 pole
Connecting rail, tin plated L = 0.4 m
Single cover for jumper bar with marking facility
Cover strip for header 24 pole
Cover strip for header with warning symbol
Insulating plate
Coding part (branch)
Sealing end 10 pole
See page 394 for labelling systems
WK 2.5 U / 8113 S/V / LED 50
finely stranded single core V A
wiecon
0.5 – 2.5 mm
2
0.5 – 4 mm
21)
12
No. 22 – 12 AWG 300 V 15
No. 24 – 12 AWG 50 V 15
5 mm 9 mm
qw
0.5 – 2.5 mm
2
0.5 – 4 mm
2
250 V/4 kV/3 12
No. 22 – 12 AWG 300 V 15
No. 24 – 12 AWG 300 V 15
5 mm 9 mm
qw
0.5 – 2.5 mm
2
0.5 – 4 mm
2
250 V/4 kV/3 12
No. 22 – 12 AWG 300 V 20
No. 24 – 12 AWG 300 V 15
5 mm 9 mm
qw
311
50
10
10
10
10
10
10
1
100
10
10
10
10
10
10
10
1
100
100
10
10
10
10
1
100
25
WK 2,5 U/8113 S/V/LED 50
***)
AP 2,5 U/8113 S/V ***)
AP 2,5 U/8113 ***)
ZP 2,5 U/8113 S/V
IVB WK 2,5-2
IVB WK 2,5-3
IVB WK 2,5-12
ADVB 2,5 GELB
TS 2,5 GELB
57.503.2855.0
07.312.1555.0
07.312.4655.0
07.312.1655.0
Z7.280.2227.0
Z7.280.2327.0
Z7.280.3227.0
05.561.4125.0
04.326.2053.0
04.343.9056.0
04.343.9156.0
07.311.2053.0
05.561.0053.0
WK 2,5 U/8113 S/V/VK
***)
AP 2,5 U/8113 ***)
AP 2,5 U/8113 S/V BL***)
ZP 2,5 U/8113 S/V
ZP 2,5 U/8113 S/V BL
IVB WK 2,5-2
IVB WK 2,5-3
IVB WK 2,5-12
ADVB 2,5 GELB
TS 2,5 GELB
57.503.3055.6
07.312.4655.0
07.312.1555.0
07.312.1655.0
07.312.1655.6
Z7.280.2227.0
Z7.280.2327.0
Z7.280.3227.0
05.561.4125.0
04.326.2053.0
04.343.9056.0
04.343.9156.0
07.311.2053.0
05.561.0053.0
WK 2,5 U/8113 S/H
***)
AP 2,5 U/8113 S/H ***)
IVB WK 2,5-2
IVB WK 2,5-3
IVB WK 2,5-12
ADVB 2,5 GELB
TS 2,5 GELB
57.503.2055.0
07.311.9855.0
Z7.280.2227.0
Z7.280.2327.0
Z7.280.3227.0
05.561.4125.0
04.326.2053.0
04.343.9056.0
04.343.9156.0
07.311.2053.0
05.584.0053.0
05.576.5853.0
Type Part No. Box Qty Type Part No. Box Qty Type Part No. Box Qty
WK 2.5 U / 8113 S/V /VK
finely stranded single core V A
WK 2.5 U / 8113 S/H
finely stranded single core V A
Indicator: R = 10 K; 0.5 W
LED colour: red
1) determined by LED at terminal
WK 2.5 U /D/ 8113 S/V / LED 25
finely stranded single core V A
wiecon
wiecon PCB
0.5 – 2.5 mm
2
0.5 – 4 mm
2
250 V/4 kV/3 12
No. 22 – 12 AWG 300 V 15
No. 24 – 12 AWG 300 V 15
5 mm 9 mm
qw
0.5 – 2.5 mm
2
0.5 – 4 mm
21)
12
No. 22 – 12 AWG 300 V 15
No. 24 – 12 AWG 25 V 15
5 mm 9 mm
qw
312
WK 2,5 U/D/8113 S/V...
***
)
AP 2,5 U/D/8113 S/V ***)
ZP 2,5 U/D/8113 S/V
IVB WK 2,5-2
IVB WK 2,5-3
IVB WK 2,5-12
ADVB 5/10 P
ADVB 2,5 GELB
TS 2,5 GELB
57.503.2155.0
07.311.9055.0
07.311.9155.0
Z7.280.2227.0
Z7.280.2327.0
Z7.280.3227.0
05.561.4125.0
04.342.3556.8
04.326.2053.8
04.343.9056.8
04.343.9156.8
07.311.2053.8
05.561.0053.0
50
10
10
10
10
10
1
10
10
10
10
10
100
50
10
10
10
10
10
1
10
10
10
10
10
100
WK 2,5 U/D/8113 S/V/LED 25
***
)
AP 2,5 U/D/8113 S/V***)
ZP 2,5 U/D/8113 S/V
IVB WK 2,5-2
IVB WK 2,5-3
IVB WK 2,5-12
ADVB 5/10 P
ADVB 2,5 GELB
TS 2,5 GELB
57.503.2255.0
07.311.9055.0
07.311.9155.0
Z7.280.2227.0
Z7.280.2327.0
Z7.280.3227.0
05.561.4125.0
04.342.3556.8
04.326.2053.8
04.343.9056.8
04.343.9156.8
07.311.2053.8
05.561.0053.0
Modular terminals, rising cage clamp with header
for pluggable PCB terminals
Type Part No. Box Qty Type Part No. Box Qty
EN 60 947-7-1/DIN VDE 0611 T1
UL Da ta
CSA Data
Width stripping length
Approvals
WK 2.5 U /D/ 8113 S/V
finely stranded single core V A
312
for PCB terminals:
– Type 8113 B
– Type 8113 BFK
– Type 8313 B
– Type 8113 B/VL
– Type 8113 B/VR
– Type 8113 B/Top
The items marked with ***) have insulating housing in
accordance with UL 94-V0 (flammability class)
Modular terminal Colour: grey
Modular terminal with LED 25 V Colour: grey
Modular terminal with LED 50 V Colour: grey
Supply terminal Colour: blue
Modular terminal with header
PCB terminals type 8113 see page 297
Accessories
Mounting rail 35 DIN rail 7.5 mm high L = 2 m
Mounting rail 35 DIN rail 15 mm high L = 2 m
Mounting rail 32 G-rail L = 2 m
End clamp with U-foot 10 mm wide
End clamp TS 35 with screw 8 mm wide
End clamp TS 32 with screw 7.5 mm wide
End plate 2.5 mm thick Colour: grey
End plate 2.5 mm thick Colour: blue
Intermediate plate 2.5 mm thick Colour: grey
Intermediate plate 2.5 mm thick Colour: blue
(for use of PCB terminals with 7.5 mm)
Jumper bar with screws, E-Cu insulated
2 pole
3 pole
up to 12 pole
Connecting rail, tin plated L = 0.4 m
Cover strips for LED (transparent)
Single cover for jumper bar with marking facility
Cover strip for header 24 pole
Cover strip for header with warning symbol 24 pole
Insulating plate
Coding part (branch)
See page 394 for labelling systems
Indicator: R = 4.7 K; 0.5 W
LED colour: red
1) determined by LED in terminal
WK 2.5 U /D/ 8113 S/V / LED 50
finely stranded single core V A
wiecon
0.5 – 2.5 mm
2
0.5 – 4 mm
21)
12
No. 22 – 12 AWG 300 V 15
No. 24 – 12 AWG 50 V 15
5 mm 9 mm
qw
0.5 – 2.5 mm
2
0.5 – 4 mm
2
250 V/4 kV/3 12
No. 22 – 12 AWG 300 V 15
No. 24 – 12 AWG 300 V 15
5 mm 9 mm
qw
313
50
10
10
10
10
10
1
10
10
10
10
10
100
50
10
10
10
10
10
1
10
10
10
10
10
100
WK 2,5 U/D/8113 S/V/LED 50
***)
AP 2,5 U/D/8113 S/V ***)
ZP 2,5 U/D/8113 S/V
IVB WK 2,5-2
IVB WK 2,5-3
IVB WK 2,5-12
ADVB 5/10 P
ADVB 2,5 GELB
TS 2,5 GELB
57.503.2355.0
07.311.9055.0
07.311.9155.0
Z7.280.2227.0
Z7.280.2327.0
Z7.280.3227.0
05.561.4125.0
04.342.3556.8
04.326.2053.8
04.343.9056.8
04.343.9156.8
07.311.2053.8
05.561.0053.0
WK 2,5 U/D/8113 S/V/VK
***)
AP 2,5 U/D/8113 S/V BL***
)
ZP 2,5 U/D/8113 S/V BL
IVB WK 2,5-2
IVB WK 2,5-3
IVB WK 2,5-12
ADVB 5/10 P
ADVB 2,5 GELB
TS 2,5 GELB
57.503.2555.6
07.311.9055.6
07.311.9155.6
Z7.280.2227.0
Z7.280.2327.0
Z7.280.3227.0
05.561.4125.0
04.342.3556.8
04.326.2053.8
04.343.9056.8
04.343.9156.8
07.311.2053.8
05.561.0053.0
Type Part No. Box Qty Type Part No. Box Qty
WK 2.5 U /D/ 8113 S/V /VK
finely stranded single core V A
Indicator: R = 10 K; 0.5 W
LED colour: red
1) determined by LED int terminal
wiecon
Two part PCB terminals
with pin strip headers
Indirect connection describes the method
used to connect an external conductor to a
PCB via a pin header and terminal
connector
System features
❐screw connection is easy to operate
❐plug in system easy to service
❐easily detachable connection
❐ number of poles 2 – 24
❐clear straight forward interconnection
❐horizontal and vertical configurations
that can be individually matched to
the relevant application
❐terminal clamping part with wire
protection
Type range
❐ pitch (3.5/7/5/10) mm
❐2 – 24 pole
❐pin strips with straight or angled solder
pins
❐pin diameters
0.8 mm, 1 mm and 1.3 mm
Marking
❐
by means of inkjet printer directly onto
the terminal using indelible ink
❐ clear pole marking which is easy to read
❐ special marking is possible on request
❐economical marking directly into the
terminal
Abbreviations for plastic marking material:
PA 66/6 = Polyamide 66/6
PC = Polycarbonate
PBT = Polybutylenterephthalate
Materials
Insulating housing:
❐high quality polyamide used because
of its excellent electrical, mechanical
and chemical properties
(see facts & DATA section)
Metal components:
❐ made from special alloys and/or special
surface treatments
❐ clamp: nickel plated brass
❐ clamping screw: galvanised and
chromated steel
❐ header contact for type 8142 and ST 29:
tinned bronze
header contact for type 8543:
tinned brass
❐wire protection: tinned bronze
❐minimum contact resistance
❐ with high corrosion protection
❐ secure, dynamic clamping function
Pin headers:
❐
Insulating parts: made of high quality
Polyamide 66/6
❐Metal components:
contact pin, Ms tinned
❐glass filled for additional reinforcement
Note:
The conductor size and connecting voltage
current capacity relate to unprepared
conductors without ferrules.
The rated current specified corresponds to
the maximum load of PCB terminal and
the size of the connected conductor.
The rated voltage is specified in accordance
with DIN VDE 0110 Part 1 (IEC 60 664-1) –
Insulation regulations for electrical
equipment in low voltage installations and
refers to the received condition of the
PCB terminals.
When fitting PCB terminals to the PCB,
the appropriate terminal should be
selected with consideration given to the
relevant electrical and physical properties
suitable to the application. Also, attention
should be paid to circuit board tracking,
creepage and clearances as well as
distances between individual conductor
and solder pads.
In addition, the various forms of environ-
mental pollutants and their degree of
influence can effect the performance of a
piece of equipment. A system approach
is therefore required to ensure that the
electrical and other parameters of the PCB
terminal match that governed by the
functionality of the printed circuit board
design.
314
wiecon PCB
Page 316 Page 318 Page 320
Type
Pitch
Cross section
Pole
wiecon
315
8543 8142 ST 29
mm 3.50/7.00 5.00/10.00 5.08
mm212.51.5
2 – 24 2 – 24 10
Type 8543
Connection at 90° to conductor
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
wiecon
wiecon PCB
316
No. 22 – 16 AWG 300 V 10 A
No. 22 – 16 AWG 300 V 10 A
iqw iqw
Z5.531.0225.0
Z5.531.0325.0
Z5.531.0425.0
Z5.531.0525.0
Z5.531.0625.0
Z5.531.0725.0
Z5.531.0825.0
Z5.531.0925.0
Z5.531.1025.0
Z5.531.1125.0
Z5.531.1225.0
Z5.531.1325.0
Z5.531.1425.0
Z5.531.1525.0
Z5.531.1625.0
25.602.5253.0
25.602.5353.0
25.602.5453.0
25.602.5553.0
25.602.5653.0
25.602.5753.0
25.602.5853.0
25.602.5953.0
25.602.6053.0
25.602.6153.0
25.602.6253.0
25.602.6353.0
25.602.6453.0
25.602.6553.0
25.602.6653.0
7.0
10.5
14.0
17.5
21.0
24.5
28.0
31.5
35.0
38.5
42.0
45.5
49.0
52.5
56.0
3.5
7.0
10.5
14.0
17.5
21.0
24.5
28.0
31.5
35.0
38.5
42.0
45.5
49.0
52.5
Z5.531.3225.0
Z5.531.3325.0
Z5.531.3425.0
Z5.531.3525.0
Z5.531.3625.0
Z5.531.3725.0
Z5.531.3825.0
Z5.531.3925.0
Z5.531.4025.0
Z5.531.4125.0
Z5.531.4225.0
Z5.531.4325.0
Z5.531.4425.0
Z5.531.4525.0
Z5.531.4625.0
25.600.5253.0
25.600.5353.0
25.600.5453.0
25.600.5553.0
25.600.5653.0
25.600.5753.0
25.600.5853.0
25.600.5953.0
25.600.6053.0
25.600.6153.0
25.600.6253.0
25.600.6353.0
25.600.6453.0
25.600.6553.0
25.600.6653.0
5
M 2
1 to 24 pole on request
Two part PCB terminal,
pitch 3.50/7.00 mm
Box Qty G T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110 (Pitch 3.5 mm)
UL Da ta
CSA Data
Approvals
PCB header
Connection vertical to PCB
unmarked Colour: grey
Pitch 3.50 mm
Rated cross section
1.0 mm2
Rated current:
6 A
Wire range:
0.14 – 1.5 mm2single core/
0.14 – 1.0 mm2finely stranded
160 V/2.5 kV/3 – overvoltage category III
250 V/2.5 kV/2 – overvoltage category II
*690 V/2.5 kV/1 – overvoltage category I
* max. 600 V for non earthed systems or expected overvoltage ≤
3kV for L ≥2.0 mm and ≤2.5 kV for 2.0 mm > L ≥1.5 mm
Rated voltages
(Pitch 7 mm): VDE 0110
400 V/6 kV/3 – overvoltage category III
690 V/6 kV/2 – overvoltage category II
1000 V/6 kV/1 – overvoltage category I
Materials
PCB terminals
Insulating component: PC grey, UL 94-V0
Clamping parts and contact spring:
tin plated brass
Clamping screw: galvanised steel
Wire protection: tin plated bronze
Header
Insulating component: reinforced PA 66/6
grey or black UL 94-V0
Contact pin: tin plated brass
Pitch 7.00 mm on request
marked Colour: black
Pitch 3.50 mm Pitch 3.50 mm
Colour: grey Colour: black
Solder pin Ø 0.8 mm Solder pin Ø 1.0 mm
Drill hole. Ø 1.0 mm Drill hole. Ø 1.3 mm
wiecon
317
Z5.532.0225.0
Z5.532.0325.0
Z5.532.0425.0
Z5.532.0525.0
Z5.532.0625.0
Z5.532.0725.0
Z5.532.0825.0
Z5.532.0925.0
Z5.532.1025.0
Z5.532.1125.0
Z5.532.1225.0
Z5.532.1325.0
Z5.532.1425.0
Z5.532.1525.0
Z5.532.1625.0
Z5.532.3225.0
Z5.532.3325.0
Z5.532.3425.0
Z5.532.3525.0
Z5.532.3625.0
Z5.532.3725.0
Z5.532.3825.0
Z5.532.3925.0
Z5.532.4025.0
Z5.532.4125.0
Z5.532.4225.0
Z5.532.4325.0
Z5.532.4425.0
Z5.532.4525.0
Z5.532.4625.0
iqw
Colour: black Colour: black
Part No. Part No.
PCB header
Connection horizontal to PCB
Pitch 3.50 mm
Colour: black Colour: black
Solder pin Ø 0.8 mm Solder pin Ø 1.0 mm
Drill hole. Ø 1.0 mm Drill hole. Ø 1.3 mm
2
3
4
5
6
7
8
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
wiecon
wiecon PCB
318
No. 22 – 12 AWG 300 V 15 A
No. 22 – 12 AWG 300 V 15 A
üiqwd üiqwd
25.602.2253.0
25.602.2353.0
25.602.2453.0
25.602.2553.0
25.602.2653.0
25.602.2753.0
25.602.2853.0
25.602.2953.0
25.602.3053.0
25.602.3153.0
25.602.3253.0
25.602.3353.0
25.602.3453.0
25.602.3553.0
25.602.3653.0
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
50
50
50
50
50
50
50
25.603.1253.0
25.603.1353.0
25.603.1453.0
25.603.1553.0
25.603.1653.0
25.603.1753.0
25.603.1853.0
Z5.530.6225.0
Z5.530.6325.0
Z5.530.6425.0
Z5.530.6525.0
Z5.530.6625.0
Z5.530.6725.0
Z5.530.6825.0
25.600.2253.0
25.600.2353.0
25.600.2453.0
25.600.2553.0
25.600.2653.0
25.600.2753.0
25.600.2853.0
25.600.2953.0
25.600.3053.0
25.600.3153.0
25.600.3253.0
25.600.3353.0
25.600.3453.0
25.600.3553.0
25.600.3653.0
Z5.530.0225.0
Z5.530.0325.0
Z5.530.0425.0
Z5.530.0525.0
Z5.530.0625.0
Z5.530.0725.0
Z5.530.0825.0
Z5.530.0925.0
Z5.530.1025.0
Z5.530.1125.0
Z5.530.1225.0
Z5.530.1325.0
Z5.530.1425.0
Z5.530.1525.0
Z5.530.1625.0
Z5.530.3225.0
Z5.530.3325.0
Z5.530.3425.0
Z5.530.3525.0
Z5.530.3625.0
Z5.530.3725.0
Z5.530.3825.0
Z5.530.3925.0
Z5.530.4025.0
Z5.530.4125.0
Z5.530.4225.0
Z5.530.4325.0
Z5.530.4425.0
Z5.530.4525.0
Z5.530.4625.0
25.601.1253.0
25.601.1353.0
25.601.1453.0
25.601.1553.0
25.601.1653.0
25.601.1753.0
25.601.1853.0
Z5.530.8225.0
Z5.530.8325.0
Z5.530.8425.0
Z5.530.8525.0
Z5.530.8625.0
Z5.530.8725.0
Z5.530.8825.0
20
30
40
50
60
70
80
10
20
30
40
50
60
70
5
M 2.5
9 to 12 pole on request
1 to 24 pole on request
Two part PCB terminal,
pitch 5.00/10.00 mm
Box Qty G T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110 (Pitch 5 mm)
UL Da ta
CSA Data
Approvals
Type 8142
Connection at 90° to conductor
PCB header
Connection vertical to PCB
unmarked
Pitch 5.00 mm
Rated cross section
2.5 mm2
Rated current:
8 A
Wire range:
0.14 – 4.0 mm2single core/
0.14 – 2.5 mm2finely stranded
200 V/4 kV/3 – overvoltage category III
250 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
unmarked
Pitch 10.00 mm
marked Colour: grey Colour: black
marked
Pitch 5.00 mm
Pitch 10.00 mm
Pitch 5.00 mm
Pitch 10.00 mm
Colour: grey Colour: black
Solder pin Ø 1.0 mm Solder pin Ø 1.3 mm
Drill hole. Ø 1.3 mm Drill hole. Ø 1.6 mm
Rated voltages
(Pitch 10.00 mm): VDE 0110
500 V/8 kV/3 – overvoltage category III
800 V/8 kV/2 – overvoltage category II
1000 V/8 kV/1 – overvoltage category I
Materials
PCB terminals
Insulating component: PC grey, UL 94-V0
Clamping parts: nickel plated brass
Clamping screw: galvanised steel
Contact spring: tin plated bronze
Header
Insulating component: reinforced PA 66/6
grey or black, UL 94-V0
Contact pin: tin plated brass
Mounting bracket
Insulating component PA 66/6 grey, M 3 screw,
galvanised steel
Z5.523.7653.0 100
Coding branch
Colour white 05.561.9453.0 25
Colour orange 05.561.9453.5 25
Z5.523.7653.0 100
Coding branch
Colour white 05.561.9453.0 25
Colour orange 05.561.9453.5 25
wiecon
319
Z5.540.6225.0
Z5.540.6325.0
Z5.540.6425.0
Z5.540.6525.0
Z5.540.6625.0
Z5.540.6725.0
Z5.540.6825.0
Z5.540.8225.0
Z5.540.8325.0
Z5.540.8425.0
Z5.540.8525.0
Z5.540.8625.0
Z5.540.8725.0
Z5.540.8825.0
Z5.540.0225.0
Z5.540.0325.0
Z5.540.0425.0
Z5.540.0525.0
Z5.540.0625.0
Z5.540.0725.0
Z5.540.0825.0
Z5.540.0925.0
Z5.540.1025.0
Z5.540.1125.0
Z5.540.1225.0
Z5.540.1325.0
Z5.540.1425.0
Z5.540.1525.0
Z5.540.1625.0
Z5.540.3225.0
Z5.540.3325.0
Z5.540.3425.0
Z5.540.3525.0
Z5.540.3625.0
Z5.540.3725.0
Z5.540.3825.0
Z5.540.3925.0
Z5.540.4025.0
Z5.540.4125.0
Z5.540.4225.0
Z5.540.4325.0
Z5.540.4425.0
Z5.540.4525.0
Z5.540.4625.0
üiqwd
drilling plan for mounting bracket
in horizontal mounting position
drilling plan for mounting bracket in
vertical mounting position
Colour: black Colour: black
Accessories
Part No. Part No. Part No. Box Qty Part No. Box Qty
PCB header
Connection horizontal to PCB
Pitch 5.00 mm vertical mounting position horizontal mounting position
Pitch 10.00 mm
Colour: black Colour: black
Solder pin Ø 1.0 mm Solder pin Ø 1.3 mm
Drill hole. Ø 1.3 mm Drill hole. Ø 1.6 mm
10
wiecon
wiecon PCB
320
1.5 mm
2
250 V 10 A
No. 22 – 14 AWG 300 V 5 A
No. 22 – 14 AWG 300 V 5 A
iqw
250 V 10 A
(if all terminals carry current) 10 A
iqw
cable size
1.5 mm2
5093.101.2053.0ST 29/10 BC 50Z5.599.9025.0
7
M 3
Two part PCB terminal.
pitch 5.08 mm
Pole Type Part No. Box Qty Type Part No. Box Qty
Rated voltages VDE 0110
EN 60 998-1, EN 60 998-2-1
UL Da ta
CSA Data
Approvals
Top connector, 10 pole
Type ST 29/10 BC
Connection at 90° to conductor
PCB header
Connection vertical to PCB
Pitch 5.08 mm
Rated cross section
1.5 mm2
Rated current:
10 A
Wire range:
0.14 – 2.5 mm2single core/
0.14 – 1.5 mm2finely stranded
200 V/4 kV/3 – overvoltage category III
250 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
Statement of Conformity/CH
Materials
PCB terminals
Insulating component: PA 66/6 grey,
UL 94-V-2
Clamping parts: nickel plated brass
Clamping screw: galvanised steel
Contact spring: tin plated bronze
Header
Insulating component: reinforced
PBT grey, UL 94-V0
Contact pin: tin plated brass
Solder pin Ø 1.3 mm
Drill hole Ø 1.6 mm
wiecon
321
100
500
500
05.599.8053.0
04.242.0850.0
04.842.0850.0
9705 A
9705 AB
S L L L L L L
S
S L L L L L S
L
S L L L L S L
L
S L L L S L L
L
S L L S L L L
L
S L S L L L L
L
S S L L L L L
L
L S L L L L L
S
L S L L L L S
L
L S L L L S L
L
L S L L S L L
L
L S L S L L L
L
L S S L L L L
L
L L S L L L L
S
Coding parts, 10 pieces on branch
Marking tag, unmarked
marked
Accessories
Accessories
Type Part No. Box Qty
Top connector
A variation of the top system is a header
which can be soldered into PCB’s.
The pin spacing is 5.08 mm.
Two holes are provided for fixing the
header and there are facilities for:
– strain relief
– locking
– marking
Dovetail guides enable several headers to
be snapped on and only the outside plug
connectors in this grouping need to be
mechanically fixed to the PCB. In order to
guarantee the stability required for the
PCB’s it is recommended that no more
than four headers are included in a group.
Terminal block, header, the relevant plug or
a plug in module each have eight locators
for coding pins.
Coding both parts is a reliable way of
preventing the top connection system
mating incorrectly.
Coding
L = PCB terminal
S = header
1. combination
2. combination
3. combination
4. combination
5. combination
6. combination
7. combination
8. combination
9. combination
10. combination
11. combination
12. combination
13. combination
14. combination
etc.
wiecon
wiecon PCB
322
Two part PCB spring loaded terminal,
Type 8520 B
A PCB terminal with a spring loaded
connection has the advantage that
contact to the printed circuit board can be
established quickly and economically.
Wieland Electric had designed its new
PCB terminal type 8520 with this in mind.
The main areas of use for this type of
PCB terminal are in applications where
high volumes require an efficient and cost
effective operation.
System features:
❐ no screw fixing
❐minimised wiring time
❐ consistency of clamping force
❐ resistant to vibrations and shocks
❐maintenance free
Several versions of type 8520 can service
a variety of applications. They are available
as a two part header terminal connector
and as a soldered design with both straight
and angled soldering pins. The rated cross
section is 0.5 mm2for single core. The
conductor can therefore be plugged in
easily without having to operate the
header clamping spring as part of the
same operation. The pitch is 3.5 mm
(7.00mm on request). The pole numbers
range from 2 to 16 poles.
Type
Pitch
Cross section
Pole
wiecon
323
8520 8520 8520
B BL/...W BL/...G
mm 3.50/7.00 3.50/7.00 3.50/7.00
mm2
0.25 – 0.50 0.25 – 0.50 0.25 – 0.50
2 – 16 2 – 16 2 – 16
Page 324 Page 325 Page 325
1000
1000
1000
500
500
500
500
250
250
250
250
250
250
250
250
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
wiecon
wiecon PCB
324
No. 24 – 20 AWG 125 V 4 A
No. 24 – 20 AWG 150 V 4 A
Z5.535.0225.0
Z5.535.0325.0
Z5.535.0425.0
Z5.535.0525.0
Z5.535.0625.0
Z5.535.0725.0
Z5.535.0825.0
Z5.535.0925.0
Z5.535.1025.0
Z5.535.1125.0
Z5.535.1225.0
Z5.535.1325.0
Z5.535.1425.0
Z5.535.1525.0
Z5.535.1625.0
25.470.0253.0
25.470.0353.0
25.470.0453.0
25.470.0553.0
25.470.0653.0
25.470.0753.0
25.470.0853.0
25.470.0953.0
25.470.1053.0
25.470.1153.0
25.470.1253.0
25.470.1353.0
25.470.1453.0
25.470.1553.0
25.470.1653.0
7.0
10.5
14.0
17.5
21.0
24.5
28.0
31.5
35.0
38.5
42.0
45.5
49.0
52.5
56.0
3.5
7.0
10.5
14.0
17.5
21.0
24.5
28.0
31.5
35.0
38.5
42.0
45.5
49.0
52.5
Z5.535.3225.0
Z5.535.3325.0
Z5.535.3425.0
Z5.535.3525.0
Z5.535.3625.0
Z5.535.3725.0
Z5.535.3825.0
Z5.535.3925.0
Z5.535.4025.0
Z5.535.4125.0
Z5.535.4225.0
Z5.535.4325.0
Z5.535.4425.0
Z5.535.4525.0
Z5.535.4625.0
25.470.3253.0
25.470.3353.0
25.470.3453.0
25.470.3553.0
25.470.3653.0
25.470.3753.0
25.470.3853.0
25.470.3953.0
25.470.4053.0
25.470.4153.0
25.470.4253.0
25.470.4353.0
25.470.4453.0
25.470.4553.0
25.470.4653.0
5
Two part PCB terminal with spring loaded connection,
Type 8520, pitch 3.50/7.00 mm, 2 x 0.5 mm2
Box Qty G T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110 (Pitch 3.5 mm)
UL Da ta
CSA Data
Approvals in preparation
Type 8520 B
Connection horizontal and vertical
PCB header 8520 S
Connection vertical to PCB
unmarked Colour: grey
Pitch 3.50 mm
Rated cross section
0.5 mm2
Rated current:
4 A
Wire range:
0.25 – 0.5 mm2single core
2 connections per pole
160 V/2.5 kV/3 – overvoltage category III
250 V/2.5 kV/2 – overvoltage category II
*690 V/2.5 kV/1 – overvoltage category I
* max. 600 V for non earthed systems or expected overvoltage
≤3 kV for L ≥2.0 mm and ≤2.5 kV for 2.0 mm > L ≥1.5 mm
marked Colour: black
Colour: grey Colour: black
Solder pin Ø 0.8 mm Solder pin Ø 1.0 mm
Drill hole. Ø 1.0 mm Drill hole. Ø 1.2 mm
Pitch 3.50 mm Pitch 3.50 mm
Rated voltages
(Pitch 7.00 mm): VDE 0110
400 V/6 kV/3 – overvoltage category III
690 V/6 kV/2 – overvoltage category II
1000 V/6 kV/1 – overvoltage category I
Materials
PCB terminals
Insulating component: PA 66/6. UL 94-V0
Clamping spring: special copper alloy, tin
plated
Header
Insulating component: reinforced PA 66/6
grey or black, UL 94-V0
Contact pin: tin plated brass
Pitch 7.00 mm on request
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
wiecon
325
1000
1000
1000
500
500
500
500
250
250
250
250
250
250
250
250
25.471.0253.0
25.471.0353.0
25.471.0453.0
25.471.0553.0
25.471.0653.0
25.471.0753.0
25.471.0853.0
25.471.0953.0
25.471.1053.0
25.471.1153.0
25.471.1253.0
25.471.1353.0
25.471.1453.0
25.471.1553.0
25.471.1653.0
7.0
10.5
14.0
17.5
21.0
24.5
28.0
31.5
35.0
38.5
42.0
45.5
49.0
52.5
56.0
3.5
7.0
10.5
14.0
17.5
21.0
24.5
28.0
31.5
35.0
38.5
42.0
45.5
49.0
52.5
25.471.3253.0
25.471.3353.0
25.471.3453.0
25.471.3553.0
25.471.3653.0
25.471.3753.0
25.471.3853.0
25.471.3953.0
25.471.4053.0
25.471.4153.0
25.471.4253.0
25.471.4353.0
25.471.4453.0
25.471.4553.0
25.471.4653.0
25.472.0253.0
25.472.0353.0
25.472.0453.0
25.472.0553.0
25.472.0653.0
25.472.0753.0
25.472.0853.0
25.472.0953.0
25.472.1053.0
25.472.1153.0
25.472.1253.0
25.472.1353.0
25.472.1453.0
25.472.1553.0
25.472.1653.0
25.472.3253.0
25.472.3353.0
25.472.3453.0
25.472.3553.0
25.472.3653.0
25.472.3753.0
25.472.3853.0
25.472.3953.0
25.472.4053.0
25.472.4153.0
25.472.4253.0
25.472.4353.0
25.472.4453.0
25.472.4553.0
25.472.4653.0
No. 24 – 20 AWG 125 V 4 A
No. 24 – 20 AWG 150 V 4 A
No. 24 – 20 AWG 125 V 4 A
No. 24 – 20 AWG 150 V 4 A
55
unmarked
Pitch 3.50 mm marked unmarked marked
PCB terminal with spring loaded connection,
Type 8520, pitch 3.50/7.00 mm, 2 x 0.5 mm2
Box Qty G T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals in preparation
Type 8520 BL/...W
Conductor horizontal to PCB
Type 8520 BL/...G
Conductor vertical to PCB
Rated cross section
0.5 mm2
Rated current:
4 A
Wire range:
0.25 – 0.5 mm2single core
2 connections per pole
160 V/2.5 kV/3 – overvoltage category III
250 V/2.5 kV/2 – overvoltage category II
*690 V/2.5 kV/1 – overvoltage category I
* max. 600 V for non earthed systems or expected overvoltage
≤3 kV for L ≥2.0 mm and ≤2.5 kV for 2.0 mm > L ≥1.5 mm
Solder pin 0.25 x 1.0 mm
Drill hole Ø 1.1 mm
Pitch 3.50 mm Pitch 3.50 mm
Rated voltages
(Pitch 7.00 mm): VDE 0110
400 V/6 kV/3 – overvoltage category III
690 V/6 kV/2 – overvoltage category II
1000 V/6 kV/1 – overvoltage category I
Drilling plan for version with 3.50/7.00 mm
pitch with angled solder pin and locating
cams
Pitch 7.00 mm on request
wiecon
wiecon PCB
326
PCB edge connector terminals
Edge connection describes the method
used to connect a plug in terminal to a
PCB without using a special connecting
element such as a pluggable or pin header
System features
❐rising cage clamp
❐detachable connection
❐clear, straight forward interconnection
❐PCB thickness: 1.4 mm up to 1.8 mm
❐floating contact springs ensure a
secure resistant clamping function to
the PCB
Coding
❐coding does not effect the number of
available poles
❐PCB with coding slots for the location
of the plug-in barriers in the contact
part
❐Coding can be effected by uilising slots
in the contact part of the connector
Marking
❐
by means of inkjet printer directly onto
the using indelible ink
❐ clear pole marking which is easy to read
❐ special marking is possible on request
abbreviations for plastic material marking
PA 66/6 = Polyamide 66/6
PC = Polycarbonate
PBT = Polybutylenterephthalate
Type range
❐ 3.5 mm and 5 mm pitch
❐ 2 – 24 pole can be supplied
❐connecting conductor sizes up to 1.5 mm2
❐ with open side walls
for expansion without effecting the pitch
or with closed side walls and therefore
no possibility of miss connection
❐with or without solder pin
Card holder
❐for secure connection to the PCB and
plug in connector
❐
special card brackets act as a guide
when using large PCB’s. With side
locating cams at the top and bottom for
attaching a perforated guide frame
Materials
Metal components:
❐ made from special alloys and/or
special surface treatments
❐minimum contact resistance
❐ high corrosion protection
Insulating housing:
❐high quality polyamide, used because
of its excellent electrical, mechanical
and chemical properties
(see facts & DATA section)
❐ material in accordance with
US-Norm UL 94-V0
❐Colour grey, similar to RAL 7032
Note:
The conductor size and connecting voltage
current capacity relate to unprepared
conductors without ferrules.
The rated current specified corresponds to
the maximum load of PCB terminal and
the size of the connected conductor.
The rated voltage is specified in accordance
with DIN VDE 0110 Part 1 (IEC 60 664-1) –
Insulation regulations for electrical equip-
ment in low voltage installations and refers
to the received condition of the PCB
terminals.
When fitting PCB terminals to the
PCB, the appropriate terminal should be
selected with consideration given to the
relevant electrical and physical properties
suitable to the application. Also, attention
should be paid to circuit board tracking,
creepage and clearances as well as
distances between individual conductor
and solder pads.
In addition, the various forms of environ-
mental pollutants and their degree of
influence can effect the performance of a
piece of equipment. A system approach
is therefore required to ensure that the
electrical and other parameters of the PCB
terminal match those governed by the
functionality of the printed circuit board
design.
wiecon
327
DST 85 DSTLF 85 LPST 1 LPSTL 1
mm 3.50 3.50 5.00 5.00
mm21.5 1.5 2.5 2.5
2 – 24 2 – 24 2 – 20 2 – 20
It is necessary to ensure for all soldered PCB terminals without an insulation plate
that the torques are supported when the clamping screws are tightened i.e. that the
terminals are locked against rotation.
For prototypes, it is recommended that only 2 and 3 pole versions should be used
with a contact plate/locating cams.
Page 328 Page 328 Page 330 Page 330
Type
Pitch
Cross section
Pole
wiecon
wiecon PCB
328
No. 30 – 14 AWG 300 V 6 A
No. 30 – 14 AWG 300 V 6 A
igqw
No. 30 – 14 AWG 300 V 6 A
No. 30 – 14 AWG 300 V 6 A
igqw
2
3
4
5
6
7
8
9
10
11
12
100
100
50
50
50
50
50
50
50
50
50
7.1
10.5
14.0
17.5
21.0
24.5
28.0
31.5
35.0
38.5
42.0
3.4
6.8
10.3
13.8
17.3
20.8
24.3
27.8
31.3
34.8
38.3
6
M 2
6
M 2
25.005.0253.0
25.005.0353.0
25.005.0453.0
25.005.0553.0
25.005.0653.0
25.005.0753.0
25.005.0853.0
25.005.0953.0
25.005.1053.0
25.005.1153.0
25.005.1253.0
25.003.0253.0
25.003.0353.0
25.003.0453.0
25.003.0553.0
25.003.0653.0
25.003.0753.0
25.003.0853.0
25.003.0953.0
25.003.1053.0
25.003.1153.0
25.003.1253.0
25.004.0253.0
25.004.0353.0
25.004.0453.0
25.004.0553.0
25.004.0653.0
25.004.0753.0
25.004.0853.0
25.004.0953.0
25.004.1053.0
25.004.1153.0
25.004.1253.0
25.002.0253.0
25.002.0353.0
25.002.0453.0
25.002.0553.0
25.002.0653.0
25.002.0753.0
25.002.0853.0
25.002.0953.0
25.002.1053.0
25.002.1153.0
25.002.1253.0
PCB edge connector,
pitch 3.50 mm
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type DST 85
Connection in line with conductor
Type DST LF 85
Connection in line with conductor
Pitch 3.50 mm
Rated cross section
1.5 mm2
Rated current:
6 A
Wire range:
0.14 – 1.5 mm2single-/finely stranded
125 V/2.5 kV/3 – overvoltage category III
250 V/2.5 kV/2 – overvoltage category II
*690 V/2.5 kV/1 – overvoltage category I
* max. 600 V for non earthed systems or expected overvoltage
≤3 kV for L ≥2.0 mm and ≤2.5 kV for 2.0 mm > L ≥1.5 mm
Box Qty G T Pole Part No. Part No. Part No. Part No.
only available up to 12 pole
unmarked unmarkedmarked marked
Thickness of PCB: 1.4 mm – 1.8 mm
Materials
PCB terminals
Insulating housing: PA 66/6 grey,
UL 94-V0
Clamping parts: nickel plated brass
Clamping screw: galvanised steel
Contact spring: tin plated bronze
329
wiecon
wiecon
wiecon PCB
330
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
No. 22 – 14 AWG 300 V 5 A
No. 22 – 14 AWG 300 V 5 A
igqw
No. 22 – 14 AWG 300 V 5 A
No. 22 – 14 AWG 300 V 5 A
igqw
25.010.0256.0
25.010.0356.0
25.010.0456.0
25.010.0556.0
25.010.0656.0
25.010.0756.0
25.010.0856.0
25.010.0956.0
25.010.1056.0
25.010.1156.0
25.010.1256.0
25.010.1356.0
25.010.1456.0
25.010.1556.0
25.010.1656.0
25.001.0256.0
25.001.0356.0
25.001.0456.0
25.001.0556.0
25.001.0656.0
25.001.0756.0
25.001.0856.0
25.001.0956.0
25.001.1056.0
25.001.1156.0
25.001.1256.0
25.001.1356.0
25.001.1456.0
25.001.1556.0
25.001.1656.0
25.000.0256.0
25.000.0356.0
25.000.0456.0
25.000.0556.0
25.000.0656.0
25.000.0756.0
25.000.0856.0
25.000.0956.0
25.000.1056.0
25.000.1156.0
25.000.1256.0
25.000.1356.0
25.000.1456.0
25.000.1556.0
25.000.1656.0
14
19
24
29
34
39
44
49
54
59
64
69
74
79
84
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
6
M 2.5
6
M 2.5
PCB edge connector,
pitch 5.00 mm
17 to 20 pole on request
Box Qty U G T Pole Part No. Part No. Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type LPST 1
connection at 90° to conductor
Type LPSTL 1
connection at 90° to conductor
marked unmarked marked
pitch 5.00 mm
with solder connection for PCBwithout solder connection for PCB
Rated cross section:
2.5 mm2
Rated current:
5 A
Wire range:
0.14 – 4.0 mm2single core/
0.14 – 2.5 mm2finely stranded
200 V/4 kV/3 – overvoltage category III
320 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
Thickness of PCB: 1.4 mm – 1.8 mm
Materials
PCB terminals
Insulating housing: reinforced PA grey,
UL 94-V2
Clamping part: nickel plated brass
Clamping screw: galvanised steel
Contact spring: bronze
– silver plated for LPST 1
– tin plated for LPSTL 1
05.593.8853.0
05.594.3653.0
05.599.2853.0
05.599.2953.0
07.413.3653.0
05.593.7756.0
05.522.7356.0
05.522.7856.0
05.522.7756.0
331
wiecon
100
200
100
100
100
500
200
200
100
Accessories
The PCB edge connectors are fixed by means
of mounting brackets. PCB guides are to be
used with the card bracket in the case of large
PCBs. These brackets have locating cams
top and bottom and on both sides to which
perforated strips can be fixed if necessary.
This provides a stable guide frame.
* outer wall can be right, left or absent as
components are created by cutting to
the corresponding number of poles →
external coding is not possible
. . Type Part No. Box Qty
Mounting bracket
H 93.5 mm
with PCB guide
locating lever
Mounting bracket
H 74 mm
with PCB guide
with locating cams
without locating cams
Perforated strip
*
Coding chip
Mounting bracket
Mounting bracket
Centre clamp
wiecon
wiecon PCB
332
Type range
❐2 – 24 poles
❐ connection of conductors horizontal and
vertical in relation to the PCB
❐ conductors can be connected at a 45° or 35°
❐ with metric:
3.5/5/7.5/10) mm
or imperial:
3.81/5.08/7.62/10.16/20.32 mm
❐ slot together individual terminals
❐ multipole blocks
❐ with or without insulating plate
❐ with or without testing plug connection
❐ with or without fixing cams
Materials
metal components
❐ made from special alloys and/or special
surface treatments
❐ low contact resistance
❐ high corrosion protection
❐ secure, dynamic clamping functions
Insulating housing
❐
high quality Polyamide
66/6 used because
of its excellent electrical, mechanical and
chemical properties (see individual
terminals for material marking)
Benefits
❐ material in accordance with UL 94-V0
❐ glass filled for additional reinforcement
DQS certification for all product areas
❐ Quality standard in accordance with DIN
ISO 9001
❐ In development, production and
installation
❐ Continued control of the quality standard
by means of regular internal and external
quality audits
❐ Compatible with certificates of other
countries:
– BSI, Great Britain
– SQS, Switzerland
– Aib-Vincotte, Belgium
– ÖQS, Austria
PCB terminals
Systems feature
❐ PCB terminals with rising cage clamp
connection
❐ PCB terminal with spring loaded
connection
❐ PCB terminal with top connection
❐ terminal can be soldered directly onto
PCB
❐ low mechanical loading of the solder
area
❐
straight forward interconnection
❐ conductors can be individually matched
to the relevant applications
❐ various numbers of pole combinations
❐ connection of single core and finely
stranded conductors between 0.14 mm2
and 16 mm2
❐
metric and imperial pitch sizes. The pitch
measured in inches can be identified by
a pip on the conductor guide funnel
❐conductor clamping by means of rising
cage clamp with/without wire protection
Marking
❐ by means of ink jet printing directly onto
the terminal using indelible ink
❐ individual terminals can be marked using
snap-on marking tags
❐ terminals with or without marking tag
carrier
❐ special marking is possible on request
Abbreviations for plastic material markings
PA 66/6 = Polyamide 66/6
PC = Polycarbonate
PBT = Polybutylenterephthalate
wiecon
333
Note:
The conductor size and connecting
voltage/current capacity relate to
unprepared conductors without ferrules.
The rated current specified corresponds
to the maximum load of the PCB terminal
and the size of the connected conductor.
The rated voltage is specified in accordance
with DIN VDE 0110 Part 1 (IEC 60 664-1) –
Insulation regulations for electrical
equipment in low voltage installations and
refers to the received condition of the PCB
terminals.
When fitting PCB terminals to the PCB,
the appropriate terminal should be
selected with consideration given to the
relevant electrical and physical properties
suited to the application. Also, attention
should be paid to circuit board tracking
creepage and clearances as well as
distances between individual conductors
and solder pads.
In addition, the various forms of
environmental pollutants and their degree
of influence can effect the performance of
a piece of equipment. A system approach
is therefore required to ensure that the
electrical and other parameters of the PCB
terminal match those governed by the
functionality of the printed circuit board
design.
Insulating plate
❐
metal components covered with a plastic
plate
❐
The safety ratings for creepage distances
and clearances can be observed even
with the PCB tracks directly under the
PCB terminal
❐with 2 and 3 pole terminals, fixing cams
on the insulating plate reduce the effect
of mechanical force on terminal and
solder area
Top connection
❐
screw connection parallel to the
connecting lead
❐
very good accessibility for the operator
in restricted installation conditions
❐ snap-on marker tag
❐ double solder pins for stability
Individual terminals
❐terminals snap together individually
❐ secure connection
❐the pitch can be expanded by means of
an intermediate plate
❐pitches available in the following sizes:
5.00/5.08/6.35/7.50/7.62/10.00/
10.16/20.32 mm
❐with cover plate
❐ double solder pins for stability
Special terminals
❐ snap together individually
❐ pitch 5.08 mm
❐secure fixing to the PCB with double
solder pins
❐modular terminal
❐disconnect terminal
❐fuse terminal with removable fuse link
and integrated return conductor
❐test socket for 2 mm or 3 mm test plug
Cross section
(finely stranded) pitch
PCB terminals
Rising cage clamp
PCB terminals
1 mm23.50
3.81
1.5 mm25.00/
10.00
5.08
7.50
7.62
2.5 mm25.00/
10.00
5.00
5.08
7.50
7.62
4 mm26.35
7.50
7.62
10.00
10 mm210.16
20.32
wiecon
wiecon PCB
334
8593
page 336
8893
page 336
8192
page 338
8292
page 338
8190
page 358
8191
page 344
8191 R
page 342
8291 R
page 342
8291
page 357
8390
page 359
8491
page 346
8491
page 346
8192 E
page 364
8292 E
page 364
8190 E
page 368
8191 E
page 357
8291 E
page 357
8195 D
page 372
8195 D
page 372
8195 V
page 375
8195 V
page 373
8192 ZW
page 339
8292 ZW
page 339
8191 ZW
page 345
8191
page 344
8291 ZW
page 357
8391 ZW
page 347
8491 ZW
page 347
8191 D
page 357
8291 D
page 357
8134
page 360
8234
page 360
8135
page 362
8235
page 357
8292 H
page 341
8292 EH
page 340
8292 DH
page 340
7572 L2
page 376
7572 L4
page 376
7573
L2/W
page 375
7572 L2
page 376
Top connection Special terminals Spring clamp terminals
wiecon
335
8185
TOP V
page 349
8285
TOP V
page 349
8385
TOP V
page 351
8485
TOP V
page 351
8158
TOP V
page 353
8258
TOP V
page 353
8358
TOP V
page
8458
TOP V
page 354
8158
TOP H
page 353
8258
TOP H
page 353
8358
TOP H
page
8458
TOP H
page 354
8152
TOP V
page 348
8152
TOP V
page 348
8152
TOP H
page 348
8152
TOP H
page 348
8185
TOP H
page 350
8285
TOP H
page 350
8385
TOP H
page 352
8485
TOP H
page 352
8276
TKS
page 378
8276
Si-D
page 379
8276
page 378
7386
TOP H
page 355
8486
TOP H
page 356
8486
TOP V
page 356
8375
page 374
8375
page 374
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
wiecon
wiecon PCB
336
No. 30 – 16 AWG 300 V 10 A
No. 30 – 16 AWG 300 V 10 A
igqw
25.195.9253.0
25.195.9353.0
25.195.0253.0
25.195.0353.0
25.195.0453.0
25.195.0553.0
25.195.0653.0
25.195.0753.0
25.195.0853.0
25.195.0953.0
25.195.1053.0
25.195.1153.0
25.195.1253.0
25.195.1353.0
25.195.1453.0
25.195.1553.0
25.195.1653.0
7.0
10.5
14.0
17.5
21.0
24.5
28.0
31.5
35.0
38.5
42.0
45.5
49.0
52.5
56.0
3.5
7.0
10.5
14.0
17.5
21.0
24.5
28.0
31.5
35.0
38.5
42.0
45.5
49.0
52.5
25.194.9253.0
25.194.9353.0
25.194.0253.0
25.194.0353.0
25.194.0453.0
25.194.0553.0
25.194.0653.0
25.194.0753.0
25.194.0853.0
25.194.0953.0
25.194.1053.0
25.194.1153.0
25.194.1253.0
25.194.1353.0
25.194.1453.0
25.194.1553.0
25.194.1653.0
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
25.197.9253.0
25.197.9353.0
25.197.0253.0
25.197.0353.0
25.197.0453.0
25.197.0553.0
25.197.0653.0
25.197.0753.0
25.197.0853.0
25.197.0953.0
25.197.1053.0
25.197.1153.0
25.197.1253.0
25.197.1353.0
25.197.1453.0
25.197.1553.0
25.197.1653.0
7.62
11.43
15.24
19.50
22.86
26.67
30.48
34.29
38.10
41.91
45.72
49.53
53.34
57.15
60.96
3.81
7.62
11.43
15.24
19.05
22.86
26.67
30.48
34.29
38.10
41.91
45.72
49.53
53.34
57.15
25.196.9253.0
25.196.9353.0
25.196.0253.0
25.196.0353.0
25.196.0453.0
25.196.0553.0
25.196.0653.0
25.196.0753.0
25.196.0853.0
25.196.0953.0
25.196.1053.0
25.196.1153.0
25.196.1253.0
25.196.1353.0
25.196.1453.0
25.196.1553.0
25.196.1653.0
5
M 2
Rated cross section:
1.0 mm2
Rated current:
10 A
Wire range:
0.14 – 1.5 mm2single core/
0.14 – 1.0 mm2finely stranded
160 V/2.5 kV/3 – overvoltage category III
*250 V/2.5 kV/2 – overvoltage category II
**690 V/2.5 kV/1 – overvoltage category I
* up to 400 V in overvoltage category I
or expected overvoltage ≤3 kV for L ≥2.0 mm and ≤2.5 kV for
2.0 mm > L ≥1.5 mm
** max. 600 V for non-earthed systems or expected overvoltage ≤
3 kV for L ≥2.0 mm and ≤2.5 kV for 2.0 mm > L ≥1.5 mm
17 to 24 pole on request
PCB terminal, rising cage clamp system
pitch 3.50/3.81 mm
Box Qty L T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 8593/8893
Conductor horizontal to PCB
unmarked
without insulating plate marked
without insulating plate unmarked
with insulating plate
with locating cams
marked
with insulating plate
with locating cams
pitch 3.50 mm
Materials
Insulating housing: PA 66/6 grey,
UL 94-V2
Clamping part: nickel plated brass
Contact and solder pin:
tin plated bronze
Clamping screw: galvanised steel
17 to 24 pole on request
unmarked
without insulating plate marked
without insulating plate unmarked
with insulating plate
with locating cams
marked
with insulating plate
with locating cams
pitch 3.81 mm
Solder pin 0.5 x 0.9 mm
Drill hole Ø 1.1 mm
without insulating plate with insulating plate
wiecon
337
unmarked
with insulating plate
without locating cams
marked
with insulating plate
without locating cams
on request on request
unmarked
with insulating plate
without locating cams
marked
with insulating plate
without locating cams
on request on request
Part No. Part No.
with insulating plate and locating cams
Drilling plan for version with locating cams
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
wiecon
wiecon PCB
338
No. 30 – 14 AWG 300 V 15/16 A
No. 30 – 14 AWG 300 V 15 A
üigqwd
25.191.9253.0
25.191.9353.0
25.191.0253.0
25.191.0353.0
25.191.0453.0
25.191.0553.0
25.191.0653.0
25.191.0753.0
25.191.0853.0
25.191.0953.0
25.191.1053.0
25.191.1153.0
25.191.1253.0
25.191.1353.0
25.191.1453.0
25.191.1553.0
25.191.1653.0
10.55
15.55
20.55
25.55
30.55
35.55
40.55
45.55
50.55
55.55
60.55
65.55
70.55
75.55
80.55
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
25.190.9253.0
25.190.9353.0
25.190.0253.0
25.190.0353.0
25.190.0453.0
25.190.0553.0
25.190.0653.0
25.190.0753.0
25.190.0853.0
25.190.0953.0
25.190.1053.0
25.190.1153.0
25.190.1253.0
25.190.1353.0
25.190.1453.0
25.190.1553.0
25.190.1653.0
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
25.193.9253.0
25.193.9353.0
25.193.0253.0
25.193.0353.0
25.193.0453.0
25.193.0553.0
25.193.0653.0
25.193.0753.0
25.193.0853.0
25.193.0953.0
25.193.1053.0
25.193.1153.0
25.193.1253.0
25.193.1353.0
25.193.1453.0
25.193.1553.0
25.193.1653.0
10.71
15.79
20.87
25.95
31.03
36.11
41.19
46.27
51.35
56.43
61.51
66.59
71.67
76.75
81.83
5.08
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
25.192.9253.0
25.192.9353.0
25.192.0253.0
25.192.0353.0
25.192.0453.0
25.192.0553.0
25.192.0653.0
25.192.0753.0
25.192.0853.0
25.192.0953.0
25.192.1053.0
25.192.1153.0
25.192.1253.0
25.192.1353.0
25.192.1453.0
25.192.1553.0
25.192.1653.0
6
M 3
without insulating plate with insulating plate
Rated cross section:
1.5 mm2
Rated current:
10 A
Wire range:
0.14 – 2.5 mm2single core/
0.14 – 1.5 mm2finely stranded
250 V/4 kV/3 – overvoltage category III
*690 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
* max. 600 V for non-earthed systems or expected overvoltage
≤4 kV
17 to 24 pole on request
PCB terminal, rising cage clamp system,
pitch 5.00/5.08 mm
Box Qty G T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 8192/8292
Conductor horizontal to PCB
unmarked
without insulating plate marked
without insulating plate unmarked
with insulating plate
with locating cams
marked
with insulating plate
with locating cams
pitch 5.00 mm
Materials
Insulating housing: PA 66/6 grey, UL 94-V0
Clamping part: nickel plated brass
Contact and solder pin: tin plated bronze
Clamping screw: galvanised steel
17 to 24 pole on request
unmarked
without insulating plate marked
without insulating plate unmarked
with insulating plate
with locating cams
marked
with insulating plate
with locating cams
pitch 5.08 mm
25.193.9253.0
25.193.9353.0
25.192.9253.0
25.192.9353.0
Solder pin 0.5 x 1 mm
Drill hole Ø 1.2 mm
wiecon
339
No. 30 – 14 AWG 300 V 15/16 A
No. 30 – 14 AWG 300 V 15 A
qw id
25.191.6253.0
25.191.6353.0
25.191.6453.0
25.191.6553.0
25.191.6653.0
25.191.6753.0
25.191.6853.0
25.191.6953.0
25.191.7053.0
25.191.7153.0
25.191.7253.0
25.191.7353.0
25.191.7453.0
25.191.7553.0
25.191.7653.0
25.193.6253.0
25.193.6353.0
25.193.6453.0
25.193.6553.0
25.193.6653.0
25.193.6753.0
25.193.6853.0
25.193.6953.0
25.193.7053.0
25.193.7153.0
25.193.7253.0
25.193.7353.0
25.193.7453.0
25.193.7553.0
25.193.7653.0
6
M 3
with insulating plate with locating cams with insulating plate, horizontal
Drilling plan for version with locating cams
wiecon
339
VDE 0110
UL-Daten field/factory wiring
CSA-Daten
Zulassungen
VDE 0110
UL-Daten field/factory wiring
CSA-Daten
Zulassungen
Type 8192 ZW/8292 ZW
Conductor vertical to PCB
unmarked
with insulating plate
without locating cams
marked
with insulating plate
without locating cams
on request
unmarked
with insulating plate
without locating cams
marked
with insulating plate
without locating cams
unmarked
with insulating plate
horizontal
marked
with insulating plate
horizontal
on request
unmarked
with insulating plate
horizontal
marked
with insulating plate
horizontal
on request
on request
Part No. Part No.
Solder pin 0.5 x 1 mm
Drill hole Ø 1.2 mm
100
100
2
3
wiecon
wiecon PCB
340
No. 24 – 14 AWG 300 V 10 A
No. 24 – 14 AWG 300 V 10 A
qw
No. 24 – 14 AWG 300 V 10 A
No. 24 – 14 AWG 300 V 10 A
qw
27.000.2253.0
27.000.2353.0
27.000.4253.0
27.000.4353.0
10.16
15.24
5.08
10.16
6
M 2.5
Rated cross section:
1.5 mm2
Rated current 15 A for Type 8292 DH
Rated current 15 A for Type 8292 EH
Rated current 15 A for Type 8292 H
(based on ambient temperature of 20 °C, rated cross section and max.
number of poles)
Wire range:
0.5 – 1.5 mm2single core/finely stranded
250 V/4 kV/3 – overvoltage category III
250 V/4 kV/2 – overvoltage category II
500 V/4 kV/1 – overvoltage category I
Box Qty G T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110
UL D ata field wiring
CSA Data field wiring
Approvals
Type 8292 DH Type 8292 EH
pitch 5.08 mm unmarked unmarked
A supporting element for the 8292 DH should
be provided on the PCB.
A supporting element for the 8292 EH should
be provided on the PCB.
PCB terminal, rising cage clamp system,
pitch 5.00/5.08 mm
G
T
5,08
11,16
36,6
3,5
12,64
G
T
5,08
25,23,5
Solder pin 0.8 x 1 mm
Drill hole Ø 1.3 mm
Solder pin 0.8 x 1 mm
Drill hole Ø 1.3 mm
wiecon
341
No. 24 – 14 AWG 300 V 10 A
No. 24 – 14 AWG 300 V 10 A
qw
27.000.0253.0
27.000.0353.0
6
M 2.5
Type 8292 H
Part No. Part No.
unmarked
10
13,5
3,5
5,08
T
G
Solder pin 0.8 x 1 mm
Drill hole Ø 1.3 mm
500
500
250
250
200
200
100
100
100
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
wiecon
wiecon PCB
342
)
No. 22 – 12 AWG 300 V 20/30 A
No. 22 – 12 AWG 300 V 25 A
üqw
25.155.2253.0
25.155.2353.0
25.155.2453.0
25.155.2553.0
25.155.2653.0
25.155.2753.0
25.155.2853.0
25.155.2953.0
25.155.3053.0
25.155.3153.0
25.155.3253.0
25.155.3353.0
25.155.3453.0
25.155.0253.0
25.155.0353.0
25.155.0453.0
25.155.0553.0
25.155.0653.0
25.155.0753.0
25.155.0853.0
25.155.0953.0
25.155.1053.0
25.155.1153.0
25.155.1253.0
25.155.1353.0
25.155.1453.0
10.85
15.85
20.85
25.85
30.85
35.85
40.85
45.85
50.85
55.85
60.85
66.85
70.85
5
10
15
20
25
30
35
40
45
50
55
60
65
500
500
250
250
200
200
100
100
100
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
25.156.2253.0
25.156.2353.0
25.156.2453.0
25.156.2553.0
25.156.2653.0
25.156.2753.0
25.156.2853.0
25.156.2953.0
25.156.3053.0
25.156.3153.0
25.156.3253.0
25.156.3353.0
25.156.3453.0
25.156.0253.0
25.156.0353.0
25.156.0453.0
25.156.0553.0
25.156.0653.0
25.156.0753.0
25.156.0853.0
25.156.0953.0
25.156.1053.0
25.156.1153.0
25.156.1253.0
25.156.1353.0
25.156.1453.0
11.01
16.09
21.17
26.25
31.33
36.41
41.49
46.57
51.56
56.73
61.81
66.89
71.97
5.08
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
6.5
M 3
Rated cross section:
2.5 mm2
Rated current:
16 A
Wire range:
0.14 – 4.0 mm2single core/
0.14 – 2.5 mm2finely stranded
250 V/4 kV/3 – overvoltage category III
*690 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
* max. 600 V for non-earthed systems or expected overvoltage ≤4 kV
PCB terminal, rising cage clamp system,
pitch 5.00/5.08 mm
Box Qty G T Pole Part No. Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 81 – 8291 R
Conductor horizontal to PCB
(with closed test probe)
unmarked
with insulating plate marked
with insulating plate
pitch 5.00 mm Type 8191 R
Materials
Insulating housing: PA 66/6 grey,
UL 94-V0
Clamping part: nickel plated brass
Contact and solder pin:
tin plated E-Cu
Clamping screw: galvanised steel
unmarked
with insulating plate marked
with insulating plate
pitch 5.08 mm Type 8291 R
Solder pin 1 x 0.8 mm
Drill hole Ø 1.3 mm
Available with slotted screw
on request
wiecon
343
500
250
200
100
50
50
2
3
4
5
6
7
No. 22 – 12 AWG 600 V 20/30 A
No. 22 – 12 AWG 600 V 25 A
üqw
25.157.1253.0
25.157.1353.0
25.157.1453.0
25.157.1553.0
25.157.1653.0
25.157.1753.0
25.157.0253.0
25.157.0353.0
25.157.0453.0
25.157.0553.0
25.157.0653.0
25.157.0753.0
15
25
35
45
55
65
10
20
30
40
50
60
500
250
200
100
50
50
2
3
4
5
6
7
25.157.5253.0
25.157.5353.0
25.157.5453.0
25.157.5553.0
25.157.5653.0
25.157.5753.0
25.157.4253.0
25.157.4353.0
25.157.4453.0
25.157.4553.0
25.157.4653.0
25.157.4753.0
15.24
25.40
35.56
45.72
55.88
66.04
10.16
20.32
30.48
40.64
50.80
60.96
6.5
M 3
PCB terminal, rising cage clamp system,
pitch 10.00/10.16 mm
Rated cross section:
2.5 mm2
Rated current:
16 A
Wire range:
0.14 – 4.0 mm2single core/
0.14 – 2.5 mm2finely stranded
690 V/8 kV/3 – overvoltage category III
1000 V/8 kV/2 – overvoltage category II
1000 V/8 kV/1 – overvoltage category I
Box Qty G T Pole Part No. Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 81 – 8291 R
Conductor horizontal to PCB
(with closed test probe, each fitted with 2 poles)
unmarked
with insulating plate marked
with insulating plate
pitch 10.00 mm Type 8191 R
Materials
Insulating housing: PA 66/6 grey,
UL 94-V0
Clamping part: nickel plated brass
Contact and solder pin:
tin plated E-Cu
Clamping screw: galvanised steel
unmarked
with insulating plate marked
with insulating plate
pitch 10.16 mm Type 8291 R
Solder pin 1 x 0.8 mm
Drill hole Ø 1.3 mm
Available with slotted screw
on request
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
wiecon
wiecon PCB
344
No. 22 – 12 AWG 300 V 20/30 A
No. 22 – 12 AWG 300 V 25 A
üizqwd
25.171.0253.0
25.171.0353.0
25.161.0253.0
25.161.0353.0
25.161.0453.0
25.161.0553.0
25.161.0653.0
25.161.0753.0
25.161.0853.0
25.161.0953.0
25.161.1053.0
25.161.1153.0
25.161.1253.0
25.161.1353.0
25.161.1453.0
25.161.1553.0
25.161.1653.0
10.85
15.85
20.85
25.85
30.85
35.85
40.85
45.85
50.85
55.85
60.85
65.85
70.85
75.85
80.85
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
25.170.0253.0
25.170.0353.0
25.160.0253.0
25.160.0353.0
25.160.0453.0
25.160.0553.0
25.160.0653.0
25.160.0753.0
25.160.0853.0
25.160.0953.0
25.160.1053.0
25.160.1153.0
25.160.1253.0
25.160.1353.0
25.160.1453.0
25.160.1553.0
25.160.1653.0
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
25.173.0253.0
25.173.0353.0
25.163.0253.0
25.163.0353.0
25.163.0453.0
25.163.0553.0
25.163.0653.0
25.163.0753.0
25.163.0853.0
25.163.0953.0
25.163.1053.0
25.163.1153.0
25.163.1253.0
25.163.1353.0
25.163.1453.0
25.163.1553.0
25.163.1653.0
11.01
16.09
21.17
26.25
31.33
36.41
41.49
46.57
51.65
56.73
61.81
66.89
71.97
77.05
82.13
5.08
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
25.172.0253.0
25.172.0353.0
25.169.0253.0
25.169.0353.0
25.168.0253.0
25.168.0353.0
25.169.6253.0
25.169.6353.0
25.168.6253.0
25.168.6353.0
25.162.0253.0
25.162.0353.0
25.162.0453.0
25.162.0553.0
25.162.0653.0
25.162.0753.0
25.162.0853.0
25.162.0953.0
25.162.1053.0
25.162.1153.0
25.162.1253.0
25.162.1353.0
25.162.1453.0
25.162.1553.0
25.162.1653.0
6.5
M 3
100
50
15.85
25.85
10
20
2
3
4 to 12 pole on request
pitch 5.00/5.08 mm, without insulating plate with insulating plate, without locating cams
pitch 10.00 mm, without insulating plate with insulating plate, without locating cams
Rated cross section:
2.5 mm2
Rated current:
16 A
Wire range:
0.14 – 4.0 mm2single core/
0.14 – 2.5 mm2finely stranded
Rated voltages:
pitch 5.00/5.08 mm VDE 0110
250 V/4 kV/3 – overvoltage category III
*690 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
Rated voltages:
pitch 10.00 mm VDE 0110
690 V/8 kV/3 – overvoltage category III
1000 V/8 kV/2 – overvoltage category II
1000 V/8 kV/1 – overvoltage category I
* max. 600 V for non-earthed systems or expected overvoltage
≤4 kV
17 to 24 pole on request
PCB terminal, rising cage clamp system,
pitch 5.00/5.08/10.00 mm
Box Qty G T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110
UL D ata field/factory wiring
CSA Data
Approvals
Type 8191/8291
Conductor horizontal to PCB
(with open test probe)
unmarked
without insulating plate marked
without insulating plate unmarked
with insulating plate
with locating cams
marked
with insulating plate
with locating cams
pitch 5.00 mm
17 to 24 pole on request
pitch 5.08 mm
pitch 10.00 mm
Solder pin 0.9 x 0.9 mm
Drill hole Ø 1.3 mm
wiecon
345
No. 22 – 12 AWG 300 V 20/30 A
No. 22 – 12 AWG 300 V 25 A
üizqwd
25.169.2253.0
25.169.2353.0
25.168.2253.0
25.168.2353.0
25.169.2253.0
25.169.2353.0
25.168.2253.0
25.168.2353.0
25.169.4253.0
25.169.4353.0
25.168.4253.0
25.168.4353.0
25.161.6253.0
25.161.6353.0
25.161.6453.0
25.161.6553.0
25.161.6653.0
25.161.6753.0
25.161.6853.0
25.161.6953.0
25.161.7053.0
25.161.7153.0
25.161.7253.0
25.161.7353.0
25.161.7453.0
25.161.7553.0
25.161.7653.0
25.163.6253.0
25.163.6353.0
25.163.6453.0
25.163.6553.0
25.163.6653.0
25.163.6753.0
25.163.6853.0
25.163.6953.0
25.163.7053.0
25.163.7153.0
25.163.7253.0
25.163.7353.0
25.163.7453.0
25.163.7553.0
25.163.7653.0
25.160.6253.0
25.160.6353.0
25.160.6453.0
25.160.6553.0
25.160.6653.0
25.160.6753.0
25.160.6853.0
25.160.6953.0
25.160.7053.0
25.160.7153.0
25.160.7253.0
25.160.7353.0
25.160.7453.0
25.160.7553.0
25.160.7653.0
25.162.6253.0
25.162.6353.0
25.162.6453.0
25.162.6553.0
25.162.6653.0
25.162.6753.0
25.162.6853.0
25.162.6953.0
25.162.7053.0
25.162.7153.0
25.162.7253.0
25.162.7353.0
25.162.7453.0
25.162.7553.0
25.162.7653.0
6.5
M 3
with insulating plate with locating cams with insulating plate horizontal 5.00/5.08 mm
with insulating plate with locating cams with insulating plate horizontal 10.00 mm
Type 8191 ZW/8291 ZW
Conductor vertical to PCB
unmarked
with insulating plate
without locating cams
marked
with insulating plate
without locating cams
Materials
Insulating housing: PA 66/6 grey,
UL 94-V0
Clamping part: nickel plated brass
Contact and solder pin:
tin plated E-Cu
Clamping screw: galvanised steel
on request on request
on request on request
unmarked
with insulating plate
horizontal
marked
with insulating plate
horizontal
Part No. Part No. Part No. Part No.
Solder pin 0.9 x 0.9 mm
Drill hole Ø 1.3 mm
Drilling plan for version with locating cams,
pitch 5.00/5.08 mm
Drilling plan for version with locating cams,
pitch 10.00 mm
2
3
100
100
2
3
wiecon
wiecon PCB
346
No. 22 – 12 AWG 300 V 20/30 A
No. 22 – 12 AWG 300 V 25 A
üizqwd
25.175.0253.0
25.175.0353.0
25.165.0253.0
25.165.0353.0
15.85
23.35
7.5
15.0
7.62
15.24
25.164.0253.0
25.164.0353.0
25.165.3253.0
25.165.3353.0
100
100
25.177.0253.0
25.177.0353.0
25.167.0253.0
25.167.0353.0
16.09
23.71
25.166.0253.0
25.166.0353.0
25.167.3253.0
25.167.3353.0
6.5
M 3
4 to 24 pole on request
without insulating plate with insulating plate, without locating cams
Rated cross section:
2.5 mm2
Rated current:
16 A
Wire range:
0.14 – 4.0 mm2single core/
0.14 – 2.5 mm2finely stranded
400 V/6 kV/3 – overvoltage category III
1000 V/6 kV/2 – overvoltage category II
1000 V/6 kV/1 – overvoltage category I
4 to 24 pole on request
PCB terminal, rising cage clamp system,
pitch 7.50/7.62 mm
Box Qty G T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 8391/8491
Conductor horizontal to PCB
unmarked
without insulating plate unmarked
with insulating plate
without locating cams
unmarked
with insulating plate
with locating cams
marked
without insulating plate
pitch 7.50 mm
Materials
Insulating housing: PA 66/6 grey, UL 94-V0
Clamping part: nickel plated brass
Contact and solder pin: tin plated E-Cu
Clamping screw: galvanised steel
unmarked
without insulating plate unmarked
with insulating plate
without locating cams
unmarked
with insulating plate
with locating cams
marked
without insulating plate
pitch 7.62 mm
Solder pin 0.9 x 0.9 mm
Drill hole Ø 1.3 mm
wiecon
347
No. 22 – 12 AWG 300 V 20/30 A
No. 22 – 12 AWG 300 V 25 A
üizqwd
25.164.3253.0
25.164.3353.0
25.174.0253.0
25.174.0353.0
25.165.6253.0
25.165.6353.0
25.164.6253.0
25.164.6353.0
25.166.3253.0
25.166.3353.0
25.176.0253.0
25.176.0353.0
25.167.6253.0
25.167.6353.0
25.166.6253.0
25.166.6353.0
6.5
M 3
with insulating plate with locating cams with insulating plate horizontal
Drilling plan for versions with locating cams
Type 8391 ZW/8491 ZW
Conductor vertical to PCB
marked
with insulating plate
without locating cams
marked
with insulating plate
with locating cams
unmarked
with insulating plate
horizontal
marked
with insulating plate
horizontal
marked
with insulating plate
without locating cams
marked
with insulating plate
with locating cams
unmarked
with insulating plate
horizontal
marked
with insulating plate
horizontal
Part No. Part No. Part No. Part No.
Solder pin 0.9 x 0.9 mm
Drill hole Ø 1.3 mm
Type 8152 TOP H
Type 8152 TOP V
wiecon
wiecon PCB
348
100
100
100
50
50
50
50
50
50
50
1
2
3
4
5
6
7
8
9
10
No. 26 – 14 AWG 300 V 10 A
No. 22 – 14 AWG 300 V 10 A
qw
No. 26 – 14 AWG 300 V 10 A
No. 22 – 14 AWG 300 V 10 A
qw
27.730.0153.0
27.730.0253.0
27.730.0353.0
27.730.0453.0
27.730.0553.0
27.730.0653.0
27.730.0753.0
27.730.0853.0
27.730.0953.0
27.730.1053.0
27.720.0153.0
27.720.0253.0
27.720.0353.0
27.720.0453.0
27.720.0553.0
27.720.0653.0
27.720.0753.0
27.720.0853.0
27.720.0953.0
27.720.1053.0
8.34
13.38
18.42
23.46
28.50
33.54
38.58
43.62
48.66
53.70
5.04
10.08
15.12
20.16
25.20
30.24
35.28
40.32
45.30
50.40
12 10
PCB terminal, TOP spring clamp,
pitch 5.00/5.08 mm
Box Qty G T Pole Part No. Part No.
Rated voltages VDE 0110
UL D ata field wiring
CSA Data
Approvals
pitch 5.00 mm
Rated cross section:
1.5 mm2
Rated current:
16 A
(based on ambient temperature 20 °C rated cross section and max.
number of poles)
Wire range:
0.50 – 2.5 mm2single core/
0.50 – 1.5 mm2finely stranded
250 V/4 kV/3 – overvoltage category III
Solder pin 0.8 x 0.4 mm
Drill hole Ø 1.3 mm
Solder pin 0.8 x 0.4 mm
Drill hole Ø 1.3 mm
G
5,04
T
18,5
22,5
3,5
5,04
G22,5
18,5
2,5
5,04
5,04
T
349
wiecon
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
11 pole
12 pole
13 pole
14 pole
15 pole
16 pole
No. 22/30 – 12 AWG 300 V 20/25 A
No. 22 – 12 AWG 300 V 20 A
qwd w
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
25.741.0253.0
25.741.0353.0
25.741.0453.0
25.741.0553.0
25.741.0653.0
25.741.0753.0
25.741.0853.0
25.741.0953.0
25.741.1053.0
25.741.1153.0
25.741.1253.0
25.741.1353.0
25.741.1453.0
25.741.1553.0
25.741.1653.0
8185 TOP V
8185 TOP V
8185 TOP V
8185 TOP V
8185 TOP V
8185 TOP V
8185 TOP V
8185 TOP V
8185 TOP V
8185 TOP V
8185 TOP V
8185 TOP V
8185 TOP V
8185 TOP V
8185 TOP V
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
25.751.0253.0
25.751.0353.0
25.751.0453.0
25.751.0553.0
25.751.0653.0
25.751.0753.0
25.751.0853.0
25.751.0953.0
25.751.1053.0
25.751.1153.0
25.751.1253.0
25.751.1353.0
25.751.1453.0
25.751.1553.0
25.751.1653.0
8285 TOP V
8285 TOP V
8285 TOP V
8285 TOP V
8285 TOP V
8285 TOP V
8285 TOP V
8285 TOP V
8285 TOP V
8285 TOP V
8285 TOP V
8285 TOP V
8285 TOP V
8285 TOP V
8285 TOP V
100
50
100
50
25
25
25
500
1
1
25.741.0053.0
07.300.4753.0
04.242.4253.0
04.242.5853.0
04.242.5053.0
04.842.5053.0
04.841.2150.0
04.242.0800.0
04.842.0850.0
04.007.4089.0
04.007.4189.0
8185 TOP V
AP 8385 TOP N
BZ 8185 TOP N
9705 A/5/10
9705 A/5/10 B
9704 A/1-0 B
9705 A
9705 AB
100
50
100
25.751.0053.0
07.300.4753.0
04.242.4253.0
8285 TOP V
AP 8385 TOP N
9
M2.5
Type Part No. Box Qty Type Part No. Box Qty
Rated voltages VDE 0110
UL D ata field-/factory wiring
CSA Data
Approvals
Type 8185 TOP V
Conductor vertical to PCB
Type 8285 TOP V
w
Terminal block pitch 5.00 mm pitch 5.08 mm
Rated cross section:
2.5 mm2
Rated current:
16 A
Wire range:
0.14 – 4.0 mm2single core/
0.14 – 2.5 mm2finely stranded
250 V/4 kV/3 – overvoltage category III
*690 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
* max. 600 V for non-earthed systems or expected overvoltage
≤4 kV
1 pole
1 pole
unmarked
1)marked
Labelled 1, 2, 3 ... 0
unmarked
1)marked
1 – 12 (100 x)
13 – 24 (100 x)
Pitch 5.00 and 5.08 mm
End plate
Marker tag holder, snap-on
Marker tag holder, snap-on,
for group marking, overall width 5.00 mm
Marking strips
Marking branch
Single tag
Adhesive marking strips
1) Labelling on request
Individual poles connected in series
PCB terminal, TOP connection system,
pitch 5.00/5.08 mm
Solder pin 0.8 x 1.0 mm
Drill hole Ø 1.3 mm
Materials
Insulating housing: PA 66/6 grey, UL 94-V0
Clamping part: galvanised steel
Contact and solder pin: tin plated E-Cu
Clamp: galvanised steel
Clamping screw: galvanised steel
wiecon
wiecon PCB
350
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
11 pole
12 pole
13 pole
14 pole
15 pole
16 pole
No. 22/30 – 12 AWG 300 V 20/25 A
No. 22 – 12 AWG 300 V 20 A
qwd
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
25.741.3253.0
25.741.3353.0
25.741.3453.0
25.741.3553.0
25.741.3653.0
25.741.3753.0
25.741.3853.0
25.741.3953.0
25.741.4053.0
25.741.4153.0
25.741.4253.0
25.741.4353.0
25.741.4453.0
25.741.4553.0
25.741.4653.0
8185 TOP H
8185 TOP H
8185 TOP H
8185 TOP H
8185 TOP H
8185 TOP H
8185 TOP H
8185 TOP H
8185 TOP H
8185 TOP H
8185 TOP H
8185 TOP H
8185 TOP H
8185 TOP H
8185 TOP H
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
25.751.3253.0
25.751.3353.0
25.751.3453.0
25.751.3553.0
25.751.3653.0
25.751.3753.0
25.751.3853.0
25.751.3953.0
25.751.4053.0
25.751.4153.0
25.751.4253.0
25.751.4353.0
25.751.4453.0
25.751.4553.0
25.751.4653.0
8285 TOP H
8285 TOP H
8285 TOP H
8285 TOP H
8285 TOP H
8285 TOP H
8285 TOP H
8285 TOP H
8285 TOP H
8285 TOP H
8285 TOP H
8285 TOP H
8285 TOP H
8285 TOP H
8285 TOP H
100
50
100
50
25
25
25
500
500
1
1
25.741.0153.0
07.300.4753.0
04.242.4253.0
04.242.5853.0
04.242.5053.0
04.842.5053.0
04.841.2150.0
04.242.0850.0
04.842.0850.0
04.007.4089.0
04.007.4189.0
8185 TOP H
AP 8385 TOP N
BZ 8185 TOP N
9705 A/5/10
9705 A/5/10 B
9704 A/1-0 B
9705 A
9705 AB
100
50
100
25.751.0153.0
07.300.4753.0
04.242.4253.0
8285 TOP H
AP 8385 TOP N
9
M 2.5
PCB terminal, TOP connection system,
pitch 5.00/5.08 mm
Type Part No. Box Qty Type Part No. Box Qty
Rated voltages VDE 0110
UL D ata field-/factory wiring
CSA Data
Approvals
Type 8185 TOP H
Conductor horizontal to PCB
Type 8285 TOP H
Terminal block pitch 5.00 mm pitch 5.08 mm
Rated cross section:
2.5 mm2
Rated current:
16 A
Wire range:
0.14 – 4.0 mm2single core/
0.14 – 2.5 mm2finely stranded
250 V/4 kV/3 – overvoltage category III
*690 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
* max. 600 V for non-earthed systems or expected overvoltage
≤4 kV
1 pole
1 pole
unmarked
1)marked
Labelled 1, 2, 3 ... 0
unmarked
1)marked
1 – 12 (100 x)
13 – 24 (100 x)
Pitch 5.00 and 5.08 mm
End plate
Marker tag holder, snap-on
Marker tag holder, snap-on,
for group marking, overall width 5.00 mm
Marking strips
Marking branch
Single tag
Adhesive marking strips
1) Labelling on request
Individual poles connected in series
Solder pin 0.8 x 1.0 mm
Drill hole Ø 1.3 mm
Materials
Insulating housing: PA 66/6 grey, UL 94-V0
Clamping part: galvanised steel
Contact and solder pin: tin plated E-Cu
Clamp: galvanised steel
Clamping screw: galvanised steel
wiecon
351
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
No. 22/30 – 12 AWG 300 V 20/25 A
No. 22 – 12 AWG 300 V 20 A
qwd
No. 22/30 – 12 AWG 300 V 20/25 A
No. 22 – 12 AWG 300 V 20 A
qwd
100
100
50
50
50
50
50
25.761.0253.0
25.761.0353.0
25.761.0453.0
25.761.0553.0
25.761.0653.0
25.761.0753.0
25.761.0853.0
8385 TOP V
8385 TOP V
8385 TOP V
8385 TOP V
8385 TOP V
8385 TOP V
8385 TOP V
100
100
50
50
50
50
50
25.771.0253.0
25.771.0353.0
25.771.0453.0
25.771.0553.0
25.771.0653.0
25.771.0753.0
25.771.0853.0
8485 TOP V
8485 TOP V
8485 TOP V
8485 TOP V
8485 TOP V
8485 TOP V
8485 TOP V
100
50
100
50
25
25
25
500
500
25.761.0053.0
07.300.4753.0
04.242.4253.0
04.242.5853.0
04.242.7553.0
04.842.7553.0
04.841.2150.0
04.242.0850.0
04.842.0850.0
8385 TOP V
AP 8385 TOP N
BZ 8185 TOP N
9705 A/7,5/10
9705 A/7,5/10 B
9704 A/1-0 B
9705 A
9705 AB
100
50
100
25.771.0053.0
07.300.4753.0
04.242.4253.0
8485 TOP V
AP 8385 TOP N
9
M 2.5
PCB terminal, TOP connection system,
pitch 7.50/7.62 mm
Pole numbers can be latched together on request
Type Part No. Box Qty Type Part No. Box Qty
Rated voltages VDE 0110
UL D ata field-/factory wiring
CSA Data
Approvals
Type 8385 TOP V
Conductor vertical to PCB
Type 8485 TOP V
Terminal block pitch 7.50 mm pitch 7.62 mm
Rated cross section:
2.5 mm2
Rated current:
16 A
Wire range:
0.14 – 4.0 mm2single core/
0.14 – 2.5 mm2finely stranded
400 V/6 kV/3 – overvoltage category III
1000 V/6 kV/2 – overvoltage category II
1000 V/6 kV/1 – overvoltage category I
1 pole
1 pole
unmarked
1)marked
Labelled 1, 2, 3 ... 0
unmarked
1)marked
Pitch 7.50 and 7.62 mm
End plate
Marker tag holder, snap-on
Marker tag holder, snap-on,
for group marking, overall width 5.00 mm
Marking strips
Marking branch
Single tag
Adhesive marking strips
1) Labelling on request
Individual poles connected in series
Solder pin 0.8 x 1.0 mm
Drill hole Ø 1.3 mm
Materials
Insulating housing: PA 66/6 grey, UL 94-V0
Clamping part: galvanised steel
Contact and solder pin: tin plated E-Cu
Clamp: galvanised steel
Clamping screw: galvanised steel
wiecon
wiecon PCB
352
No. 22/30 – 12 AWG 300 V 20/25 A
No. 22 – 12 AWG 300 V 20 A
qwd qwd
100
100
50
50
50
50
50
25.761.3253.0
25.761.3353.0
25.761.3453.0
25.761.3553.0
25.761.3653.0
25.761.3753.0
25.761.3853.0
8385 TOP H
8385 TOP H
8385 TOP H
8385 TOP H
8385 TOP H
8385 TOP H
8385 TOP H
100
100
50
50
50
50
50
25.771.3253.0
25.771.3353.0
25.771.3453.0
25.771.3553.0
25.771.3653.0
25.771.3753.0
25.771.3853.0
8485 TOP H
8485 TOP H
8485 TOP H
8485 TOP H
8485 TOP H
8485 TOP H
8485 TOP H
100
50
100
50
25
25
25
500
500
25.761.0153.0
07.300.4753.0
04.242.4253.0
04.242.5853.0
04.242.7553.0
04.842.7553.0
04.841.2150.0
04.242.0850.0
04.842.0850.0
8385 TOP H
AP 8385 TOP N
BZ 8185 TOP N
9705 A/7,5/10
9705 A/7,5/10 B
9704 A/1-0 B
9705 A
9705 AB
100
50
100
25.771.0153.0
07.300.4753.0
04.242.4253.0
8485 TOP H
AP 8385 TOP N
9
M 2.5
PCB terminal, TOP connection system,
pitch 7.50/7.62 mm
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
Type Part No. Box Qty Type Part No. Box Qty
Rated voltages VDE 0110
UL D ata field-/factory wiring
CSA Data
Approvals
Type 8385 TOP H
Conductor horizontal to PCB
Type 8485 TOP H
Terminal block pitch 7.50 mm pitch 7.62 mm
Rated cross section:
2.5 mm2
Rated current:
16 A
Wire range:
0.14 – 4.0 mm2single core/
0.14 – 2.5 mm2finely stranded
400 V/6 kV/3 – overvoltage category III
1000 V/6 kV/2 – overvoltage category II
1000 V/6 kV/1 – overvoltage category I
1 pole
1 pole
unmarked
1)marked
Labelled 1, 2, 3 ... 0
unmarked
1)marked
Pitch 5.00 and 5.08 mm
End plate
Marker tag holder, snap-on
Marker tag holder, snap-on,
for group marking, overall width 5.00 mm
Marking strips
Marking branch
Single tag
Adhesive marking strips
1) Labelling on request
Individual poles connected in series
Solder pin 0.8 x 1.0 mm
Drill hole Ø 1.3 mm
Materials
Insulating housing: PA 66/6 grey, UL 94-V0
Clamping part: galvanised steel
Contact and solder pin: tin plated E-Cu
Clamp: galvanised steel
Clamping screw: galvanised steel
wiecon
353
1 – 12 (100 x)
13 – 24 (100 x)
1
1
10
04.007.4089.0
04.007.4189.0
Z5.553.2921.0
1
1
10
04.007.4089.0
04.007.4189.0
Z5.553.2921.0
No. 22/30 – 12 AWG
No. 22 – 12 AWG
No. 22/30 – 12 AWG
No. 22 – 12 AWG
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
25.780.0253.0
25.780.0353.0
25.780.0453.0
25.780.0553.0
25.780.0653.0
25.780.0753.0
25.780.0853.0
25.780.0953.0
25.780.1053.0
25.780.1153.0
25.780.1253.0
25.780.1353.0
25.780.1453.0
25.780.1553.0
25.780.1653.0
8158 TOP V
8158 TOP V
8158 TOP V
8158 TOP V
8158 TOP V
8158 TOP V
8158 TOP V
8158 TOP V
8158 TOP V
8158 TOP V
8158 TOP V
8158 TOP V
8158 TOP V
8158 TOP V
8158 TOP V
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
25.790.0253.0
25.790.0353.0
25.790.0453.0
25.790.0553.0
25.790.0653.0
25.790.0753.0
25.790.0853.0
25.790.0953.0
25.790.1053.0
25.790.1153.0
25.790.1253.0
25.790.1353.0
25.790.1453.0
25.790.1553.0
25.790.1653.0
8158 TOP H
8158 TOP H
8158 TOP H
8158 TOP H
8158 TOP H
8158 TOP H
8158 TOP H
8158 TOP H
8158 TOP H
8158 TOP H
8158 TOP H
8158 TOP H
8158 TOP H
8158 TOP H
8158 TOP H
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
25.781.0253.0
25.781.0353.0
25.781.0453.0
25.781.0553.0
25.781.0653.0
25.781.0753.0
25.781.0853.0
25.781.0953.0
25.781.1053.0
25.781.1153.0
25.781.1253.0
25.781.1353.0
25.781.1453.0
25.781.1553.0
25.781.1653.0
8258 TOP V
8258 TOP V
8258 TOP V
8258 TOP V
8258 TOP V
8258 TOP V
8258 TOP V
8258 TOP V
8258 TOP V
8258 TOP V
8258 TOP V
8258 TOP V
8258 TOP V
8258 TOP V
8258 TOP V
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
25.791.0253.0
25.791.0353.0
25.791.0453.0
25.791.0553.0
25.791.0653.0
25.791.0753.0
25.791.0853.0
25.791.0953.0
25.791.1053.0
25.791.1153.0
25.791.1253.0
25.791.1353.0
25.791.1453.0
25.791.1553.0
25.791.1653.0
8258 TOP H
8258 TOP H
8258 TOP H
8258 TOP H
8258 TOP H
8258 TOP H
8258 TOP H
8258 TOP H
8258 TOP H
8258 TOP H
8258 TOP H
8258 TOP H
8258 TOP H
8258 TOP H
8258 TOP H
99
PCB terminal, spring clamp system
pitch 5.00/5.08 mm
Adhesive marking strips
Labelling on request
Test plug
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
11 pole
12 pole
13 pole
14 pole
15 pole
Larger pole combinations on request 16 pole
Type Part No. Box Qty Type Part No. Box Qty
Rated voltages VDE 0110
UL D ata field-/factory wiring
CSA Data
Approvals in preparation
Type 8158 TOP V 8258 TOP V
Conductor vertical to PCB
Type 8158 TOP H 8258 TOP H
Conductor horizontal to PCB
pitch 5.00 mm
Rated cross section:
2.5 mm2
Rated current:
16 A
Wire range:
0.14 – 4.0 mm2single core/
0.14 – 2.5 mm2finely stranded
250 V/4 kV/3 – overvoltage category III
*690 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
Materials
Insulating housing: PA 66/6 grey, UL 94-V0
Clamping part: nickel plated brass
Contact and solder pin:tin plated E-Cu
* max. 600 V for non-earthed systems or
expected overvoltage ≤4 kV
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
11 pole
12 pole
13 pole
14 pole
15 pole
Larger pole combinations on request 16 pole
pitch 5.08 mm
Accessories
Solder pin 0.5 x 1.15 mm
Drill hole Ø 1.3 mm Solder pin 0.5 x 1.15 mm
Drill hole Ø 1.3 mm
wiecon
wiecon PCB
354
10Z5.553.2921.0 10Z5.553.2921.0
No. 22/30 – 12 AWG
No. 22 – 12 AWG
No. 22/30 – 12 AWG
No. 22 – 12 AWG
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
25.782.0253.0
25.782.0353.0
25.782.0453.0
25.782.0553.0
25.782.0653.0
25.782.0753.0
25.782.0853.0
25.782.0953.0
25.782.1053.0
25.782.1153.0
25.782.1253.0
25.782.1353.0
25.782.1453.0
25.782.1553.0
25.782.1653.0
8358 TOP V
8358 TOP V
8358 TOP V
8358 TOP V
8358 TOP V
8358 TOP V
8358 TOP V
8358 TOP V
8358 TOP V
8358 TOP V
8358 TOP V
8358 TOP V
8358 TOP V
8358 TOP V
8358 TOP V
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
25.792.0253.0
25.792.0353.0
25.792.0453.0
25.792.0553.0
25.792.0653.0
25.792.0753.0
25.792.0853.0
25.792.0953.0
25.792.1053.0
25.792.1153.0
25.792.1253.0
25.792.1353.0
25.792.1453.0
25.792.1553.0
25.792.1653.0
8358 TOP H
8358 TOP H
8358 TOP H
8358 TOP H
8358 TOP H
8358 TOP H
8358 TOP H
8358 TOP H
8358 TOP H
8358 TOP H
8358 TOP H
8358 TOP H
8358 TOP H
8358 TOP H
8358 TOP H
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
25.783.0253.0
25.783.0353.0
25.783.0453.0
25.783.0553.0
25.783.0653.0
25.783.0753.0
25.783.0853.0
25.783.0953.0
25.783.1053.0
25.783.1153.0
25.783.1253.0
25.783.1353.0
25.783.1453.0
25.783.1553.0
25.783.1653.0
8458 TOP V
8458 TOP V
8458 TOP V
8458 TOP V
8458 TOP V
8458 TOP V
8458 TOP V
8458 TOP V
8458 TOP V
8458 TOP V
8458 TOP V
8458 TOP V
8458 TOP V
8458 TOP V
8458 TOP V
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
25.793.0253.0
25.793.0353.0
25.793.0453.0
25.793.0553.0
25.793.0653.0
25.793.0753.0
25.793.0853.0
25.793.0953.0
25.793.1053.0
25.793.1153.0
25.793.1253.0
25.793.1353.0
25.793.1453.0
25.793.1553.0
25.793.1653.0
8458 TOP H
8458 TOP H
8458 TOP H
8458 TOP H
8458 TOP H
8458 TOP H
8458 TOP H
8458 TOP H
8458 TOP H
8458 TOP H
8458 TOP H
8458 TOP H
8458 TOP H
8458 TOP H
8458 TOP H
99
PCB terminal, spring clamp system
pitch 7.50/7.62 mm
Labelling on request
Test plug
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
11 pole
12 pole
13 pole
14 pole
15 pole
Larger pole combinations on request 16 pole
Type Part No. Box Qty Type Part No. Box Qty
Rated voltages VDE 0110
UL D ata field-/factory wiring
CSA Data
Approvals in preparation
Type 8358 TOP V 8458 TOP V
Conductor vertical to PCB
Type 8358 TOP H 8458 TOP H
Conductor horizontal to PCB
pitch 7.50 mm
Rated cross section:
2.5 mm2
Rated current:
16 A
Wire range:
0.14 – 4.0 mm2single core/
0.14 – 2.5 mm2finely stranded
400 V/6 kV/3 – overvoltage category III
1000 V/6 kV/2 – overvoltage category II
1000 V/6 kV/1 – overvoltage category I
Materials
Insulating housing: PA 66/6 grey, UL 94-V0
Clamping part: nickel plated brass
Contact and solder pin: tin plated E-Cu
2 pole
3 pole
4 pole
5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
11 pole
12 pole
13 pole
14 pole
15 pole
Larger pole combinations on request 16 pole
pitch 7.62 mm
Accessories
Solder pin 0.5 x 1.15 mm
Drill hole Ø 1.3 mm Solder pin 0.5 x 1.15 mm
Drill hole Ø 1.3 mm
G
6,35
T
26
26
3,5
10,16
355
wiecon
50
50
50
50
50
50
50
2
3
4
5
6
7
8
No. 22 – 10 AWG 300 V 30 A
No. 22 – 10 AWG 300 V 30 A
27.714.0253.0
27.714.0353.0
27.714.0453.0
27.714.0553.0
27.714.0653.0
27.714.0753.0
27.714.0853.0
14.20
20.55
26.90
33.25
39.60
45.95
52.30
6.35
12.70
19.05
25.40
31.75
38.10
44.45
13
M 3
PCB terminal, TOP connection system
pitch 6.35 mm
Solder pin Ø 0.8 x 0.9 mm
Drill hole Ø 1.3 mm
Box Qty G T Pole Part No.
Rated voltages VDE 0110
UL D ata field wiring
CSA Data
Approvals
Type 7386 TOP H
unmarked
pitch 6.35 mm
Rated cross section:
4.0 mm2
Rated current:
36 A
(based on ambient temperature 20 °C rated cross section and
max. number of poles)
Wire range:
0.5 – 6.0 mm2single core/
0.5 – 4.0 mm2finely stranded
320 V/4 kV/3 – overvoltage category III
320 V/4 kV/2 – overvoltage category II
320 V/4 kV/1 – overvoltage category I
wiecon
wiecon PCB
356
50
50
50
2
3
4
No. 22 – 10 AWG 300 V 30 A
No. 22 – 10 AWG 300 V 30 A
qw
No. 22 – 10 AWG 300 V 30 A
No. 22 – 10 AWG 300 V 30 A
qw
27.713.0253.0
27.713.0353.0
27.713.0453.0
27.703.0253.0
27.703.0353.0
27.703.0453.0
16.74
24.36
31.98
7.62
15.24
22.86
13 13
M 3
PCB terminal, TOP connection system
pitch 7.62 mm
Box Qty G T Pole Part No. Part No.
Rated voltages VDE 0110
UL Data field wiring
CSA Data
Approvals
8486 TOP V 8486 TOP H
unmarked unmarked
pitch 7.62 mm
Rated cross section:
4.0 mm2
Rated current:
36 A
(based on ambient 20˚C, rated cross section and max. number of
poles)
Wire range:
0.5 – 6.0 mm2single core/
0.5 – 4.0 mm2finely stranded
500 V/4 kV/3 – Overvoltage category III
630 V/4 kV/2 – Overvoltage category II
1000 V/4 kV/1 – Overvoltage category I
Solder pin 0.8 x 0.9 mm
Drill hole Ø 1.3 mm
Solder pin 0.8 x 0.9 mm
Drill hole Ø 1.3 mm
G
7,62
T
26
26
3,5
10,16
G26
26
3,5
10,16
7,62
T
357
wiecon
1 Z5.533.7121.0 100
2 Z5.533.7221.0 100
1 Z5.533.7121.0 100
04.242.4653.0 50
04.242.5053.0 25
04.842.5053.0 25
04.841.2150.0 25
04.242.0850.0 500
04.842.0850.0 500
1 – 12 04.007.4089.0 1
13 – 24 04.007.4189.0 1
25 – 36 04.007.4289.0 1
37 – 48 04.007.4389.0 1
49 – 60 04.007.4489.0 1
61 – 72 04.007.4589.0 1
73 – 84 04.007.4689.0 1
85 – 96 04.007.4789.0 1
97 – 108 04.007.4889.0 1
1 Z5.533.7121.0 100
2 Z5.533.7221.0 100
1 Z5.533.7121.0 100
04.242.4653.0 50
04.242.5053.0 25
04.842.5053.0 25
04.841.2150.0 25
04.242.0850.0 500
04.842.0850.0 500
1 – 12 04.007.4089.0 1
13 – 24 04.007.4189.0 1
25 – 36 04.007.4289.0 1
37 – 48 04.007.4389.0 1
49 – 60 04.007.4489.0 1
61 – 72 04.007.4589.0 1
73 – 84 04.007.4689.0 1
85 – 96 04.007.4789.0 1
97 – 108 04.007.4889.0 1
1 Z5.533.7121.0 100
2 Z5.533.8221.0 50
Accessories
Type 8191 / 8191 E / 8191 D / 8192
Type 8291 / 8291 E / 8291 D
Type 8391/8491 Type 8135 / 8235
Type 8191 ZW / 8291 ZW / 8192
Test plugs and marker holder 8191 E / 8191 D / 8291 E /
8291 can only be used in the upper tier
Pole Part No.
Box Qty Pole Part No. Box Qty Pole Part No. Box Qty
Test plug
Test plug 1pole pitch 10 mm
Marker tag carrier for 12 pole,
can be divided for smaller pole numbers
Marker strips unmarked
Marked 1 – 10, 11 – 20 etc. 991 – 999
Marking branch,
labelled 1, 2, 3 ... 0
Single tag, unmarked
Marked
Adhesive marking strips
(1 sheet = 100 strips)
Test plug
Test plug 1 pole pitch 10 mm
Marker tag carrier for 12 pole,
can be divided for smaller pole numbers
Marker strips unmarked
Marked 1 – 10, 11 – 20 etc. 991 – 999
Marking branch
labelled 1, 2, 3 ... 0
Single tag, unmarked
Marked
Adhesive marking strips
(1 sheet = 100 strips)
Test plug
• 2 to 24 pole connecting comb for pitch 5.00 and
5.08 mm available on request
• PCB terminals with assembled connecting comb
available on request
2
3
4
5
6
7
8
9
10
11
12
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
wiecon
wiecon PCB
No. 22 – 12 AWG 300 V 15 A
No. 22 – 14 AWG 300 V 10 A
igqwd
25.131.0253.0
25.131.0353.0
25.131.0453.0
25.131.0553.0
25.131.0653.0
25.131.0753.0
25.131.0853.0
25.131.0953.0
25.131.1053.0
25.131.1153.0
25.131.1253.0
25.131.1353.0
25.131.1453.0
25.131.1553.0
25.131.1653.0
10.86
15.86
20.86
25.86
30.86
35.86
40.86
45.86
50.86
55.86
60.86
65.86
70.86
75.86
80.86
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
50
50
50
50
50
50
50
50
50
50
50
25.133.0253.0
25.133.0353.0
25.133.0453.0
25.133.0553.0
25.133.0653.0
25.133.0753.0
25.133.0853.0
25.133.0953.0
25.133.1053.0
25.133.1153.0
25.133.1253.0
25.130.0253.0
25.130.0353.0
25.130.0453.0
25.130.0553.0
25.130.0653.0
25.130.0753.0
25.130.0853.0
25.130.0953.0
25.130.1053.0
25.130.1153.0
25.130.1253.0
25.130.1353.0
25.130.1453.0
25.130.1553.0
25.130.1653.0
25.132.0253.0
25.132.0353.0
25.132.0453.0
25.132.0553.0
25.132.0653.0
25.132.0753.0
25.132.0853.0
25.132.0953.0
25.132.1053.0
25.132.1153.0
25.132.1253.0
20.86
30.86
40.86
50.86
60.86
70.86
80.86
90.86
100.86
110.86
120.86
10
20
30
40
50
60
70
80
90
100
110
6.5
M 2.5
358
1 Z5.543.0153.0 100
2 Z5.543.0253.0 100
04.242.4653.0 50
.
04.242.5053.0 25
.
04.842.5053.0 25
04.841.2150.0 25
04.242.0850.0 500
04.842.0850.0 500
1 – 12 04.007.4089.0 1
13 – 24 04.007.4189.0 1
25 – 36 04.007.4289.0 1
37 – 48 04.007.4389.0 1
49 – 60 04.007.4489.0 1
61 – 72 04.007.4589.0 1
73 – 84 04.007.4689.0 1
85 – 96 04.007.4789.0 1
97 – 108 04.007.4889.0 1
17 to 24 pole on request
PCB terminal, rising cage clamp system
pitch 5.00/10.00 mm
Box Qty G T Pole Part No. Part No. Pole Part No. Box Qty
Rated voltages VDE 0110 (pitch 5 mm)
UL Da ta
CSA Data
Approvals
Type 8190
conductor horizontal to PCB
Accessories
Type 8190
unmarked
pitch 5.00 mm
Rated cross section:
2.5 mm2
Rated current:
16 A
Wire range:
0.14 – 4.0 mm2single core/
0.14 – 2.5 mm2finely stranded
250 V/4 kV/3 – Overvoltage category III
*690 V/4 kV/2 – Overvoltage category II
1000 V/4 kV/1 – Overvoltage category I
* max. 600 V for non-earthed systems or expected overvoltage
≤4 kV
unmarked
pitch 10.00 mm
marked
marked
Solder pin 0.8 x 0.9 mm
Drill hole Ø 1.2 mm
Rated voltages
(pitch 10.00 mm): VDE 0110
690 V/8 kV/3 – Overvoltage category III
1000 V/8 kV/2 – Overvoltage category II
1000 V/8 kV/1 – Overvoltage category I
Materials
Insulating housing: PA 6/66, UL 94-V0
Clamping part: galvanised steel
Contact and solder pin: tin plated E-Cu
Clamping screw: galvanised steel
Test plug nominal current = 2 A
Marker tag carrier for 12 pole,
can be divided for smaller pole numbers
Marker strips unmarked
Marked 1 – 10, 11 – 20 etc. 991 – 999
Marking branch
labelled 1, 2, 3 ... 0
Single tag, unmarked
Marked
Adhesive marking strips
(1 sheet = 100 strips)
359
100
100
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
wiecon
No. 22 – 12 AWG 300 V 15 A
No. 22 – 14 AWG 300 V 10 A
igqwd
25.151.0253.0
25.151.0353.0
25.151.0453.0
25.151.0553.0
25.151.0653.0
25.151.0753.0
25.151.0853.0
25.151.0953.0
25.151.1053.0
25.151.1153.0
25.151.1253.0
15.86
23.36
30.86
38.36
45.86
53.36
60.86
68.36
75.86
83.36
90.86
7.5
15.0
22.5
30.0
37.5
45.0
52.5
60.0
67.5
75.0
82.5
25.150.0253.0
25.150.0353.0
25.150.0453.0
25.150.0553.0
25.150.0653.0
25.150.0753.0
25.150.0853.0
25.150.0953.0
25.150.1053.0
25.150.1153.0
25.150.1253.0
6.5
M 2.5
1 Z5.543.0153.0 100
2 Z5.543.0253.0 100
PCB terminal, rising cage clamp system
pitch 7.50 mm
Box Qty G T Pole Part No. Part No. Pole Part No. Box Qty
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 8390
conductor horizontal to PCB
Accessories
Type 8390
unmarked
pitch 7.50 mm
Rated cross section:
2.5 mm2
Rated current:
16 A
Wire range:
0.14 – 4.0 mm2single core/
0.14 – 2.5 mm2finely stranded
500 V/6 kV/3 – Overvoltage category III
1000 V/6 kV/2 – Overvoltage category II
1000 V/6 kV/1 – Overvoltage category I
marked
Solder pin 0.8 x 0.9 mm
Drill hole Ø 1.2 mm
Materials
Insulating housing: PA 6/66, UL 94-V0
Clamping part: galvanised steel
Contact and solder pin: tin plated E-Cu
Clamping screw: galvanised steel
Test plug nominal current = 2 A
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
wiecon
wiecon PCB
360
No. 30 – 14 AWG 300 V 15/16 A
No. 30 – 14 AWG 300 V 15 A
üigqwd
25.501.6253.0
25.501.6353.0
25.501.0253.0
25.501.0353.0
25.501.0453.0
25.501.0553.0
25.501.0653.0
25.501.0753.0
25.501.0853.0
25.501.0953.0
25.501.1053.0
25.501.1153.0
25.501.1253.0
25.501.1353.0
25.501.1453.0
25.501.1553.0
25.501.1653.0
10.55
15.55
20.55
25.55
30.55
35.55
40.55
45.55
50.55
55.55
60.55
65.55
70.55
75.55
80.55
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
25.500.6253.0
25.500.6353.0
25.500.0253.0
25.500.0353.0
25.500.0453.0
25.500.0553.0
25.500.0653.0
25.500.0753.0
25.500.0853.0
25.500.0953.0
25.500.1053.0
25.500.1153.0
25.500.1253.0
25.500.1353.0
25.500.1453.0
25.500.1553.0
25.500.1653.0
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
25.503.6253.0
25.503.6353.0
25.503.0253.0
25.503.0353.0
25.503.0453.0
25.503.0553.0
25.503.0653.0
25.503.0753.0
25.503.0853.0
25.503.0953.0
25.503.1053.0
25.503.1153.0
25.503.1253.0
25.503.1353.0
25.503.1453.0
25.503.1553.0
25.503.1653.0
10.71
15.79
20.87
25.95
31.03
36.11
41.19
46.27
51.35
56.42
61.51
66.59
71.67
76.75
81.83
5.08
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
25.502.6253.0
25.502.6353.0
25.502.0253.0
25.502.0353.0
25.502.0453.0
25.502.0553.0
25.502.0653.0
25.502.0753.0
25.502.0853.0
25.502.0953.0
25.502.1053.0
25.502.1153.0
25.502.1253.0
25.502.1353.0
25.502.1453.0
25.502.1553.0
25.502.1653.0
6
M 3
without insulating plate with insulating plate, without locating cams
Drilling plan for version with locating cams
Rated cross section:
1.5 mm2
Rated current:
10 A
Wire range:
0.14 – 2.5 mm2single core/
0.14 – 1.5 mm2finely stranded
250 V/4 kV/3 – Overvoltage category III
*690 V/4 kV/2 – Overvoltage category II
1000 V/4 kV/1 – Overvoltage category I
* max. 600 V for non-earthed systems or expected overvoltage
≤4 kV
17 to 24 pole on request
PCB terminal, rising cage clamp system
pitch 5.00/5.08 mm
Box Qty G T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110
UL Data field-/factory wiring
CSA Data
Approvals
Type 8134/8234
Conductor at 35° to PCB
unmarked
without insulating plate marked
without insulating plate unmarked
with insulating plate
with locating cams
marked
with locating cams
pitch 5.00 mm
17 to 24 pole on request
pitch 5.08 mm
Solder pin 0.5 x 1.0 mm
Drill hole Ø 1.2 mm
wiecon
361
unmarked
with insulating plate
without locating cams
marked
with insulating plate
with locating cams
Materials
Insulating housing: PA 66/6 grey, UL 94-V0
Clamping part: nickel plated brass
Contact and solder pin: tin-plated bronze
Clamping screw: galvanised steel
on request on request
on request on request
Part No. Part No.
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
wiecon
wiecon PCB
362
No. 22 – 12 AWG 300 V 20/30 A
No. 22 – 12 AWG 300 V 25 A
üizqwd
25.521.6253.0
25.521.6353.0
25.521.0253.0
25.521.0353.0
25.521.0453.0
25.521.0553.0
25.521.0653.0
25.521.0753.0
25.521.0853.0
25.521.0953.0
25.521.1053.0
25.521.1153.0
25.521.1253.0
25.521.1353.0
25.521.1453.0
25.521.1553.0
25.521.1653.0
10.85
15.85
20.85
25.85
30.85
35.85
40.85
45.85
50.85
55.85
60.85
65.85
70.85
75.85
80.85
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
25.520.6253.0
25.520.6353.0
25.520.0253.0
25.520.0353.0
25.520.0453.0
25.520.0553.0
25.520.0653.0
25.520.0753.0
25.520.0853.0
25.520.0953.0
25.520.1053.0
25.520.1153.0
25.520.1253.0
25.520.1353.0
25.520.1453.0
25.520.1553.0
25.520.1653.0
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
25.523.6253.0
25.523.6353.0
25.523.0253.0
25.523.0353.0
25.523.0453.0
25.523.0553.0
25.523.0653.0
25.523.0753.0
25.523.0853.0
25.523.0953.0
25.523.1053.0
25.523.1153.0
25.523.1253.0
25.523.1353.0
25.523.1453.0
25.523.1553.0
25.523.1653.0
11.01
16.09
21.17
26.25
31.33
36.41
41.49
46.57
51.65
56.73
61.81
66.89
71.97
77.05
82.13
5.08
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
25.522.6253.0
25.522.6353.0
25.522.0253.0
25.522.0353.0
25.522.0453.0
25.522.0553.0
25.522.0653.0
25.522.0753.0
25.522.0853.0
25.522.0953.0
25.522.1053.0
25.522.1153.0
25.522.1253.0
25.522.1353.0
25.522.1453.0
25.522.1553.0
25.522.1653.0
6.5
M 3
without insulating plate with insulating plate, without locating cams
Drilling plan for version with locating cams
Rated cross section:
2.5 mm2
Rated current:
16 A
Wire range:
0.14 – 4.0 mm2single core/
0.14 – 2.5 mm2finely stranded
250 V/4 kV/3 – Overvoltage category III
*690 V/4 kV/2 – Overvoltage category II
1000 V/4 kV/1 – Overvoltage category I
* max. 600 V for non-earthed systems or expected overvoltage
≤4 kV
17 to 24 pole on request
PCB terminal, rising cage clamp system
pitch 5.00/5.08 mm
Box Qty G T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110
UL Data field-/factory wiring
CSA Data
Approvals
Type 8135/8235
Conductor at 35° to PCB
unmarked
without insulating plate marked
without insulating plate unmarked
with insulating plate
with locating cams
marked
with insulating plate
with locating cams
pitch 5.00 mm
17 to 24 pole on request
pitch 5.08 mm
Solder pin 0.9 x 0.9 mm
Drill hole Ø 1.3 mm
wiecon
363
with insulating plate, with locating cams
unmarked
with insulating plate
without locating cams
marked
with insulating plate
without locating cams
Materials
Insulating housing: PA 66/6 grey, UL 94-V0
Clamping part: nickel plated brass
Contact and solder pin: tin plated E-Cu
Clamping screw: galvanised steel
on request on request
on request on request
Part No. Part No.
50
50
50
50
50
50
50
50
50
50
50
4
6
8
10
12
14
16
18
20
22
24
wiecon
wiecon PCB
364
No. 30 – 14 AWG 300 V 15/16 A
No. 30 – 14 AWG 300 V 15 A
üigqwd
25.198.9253.0
25.198.9353.0
25.198.5253.0
25.198.5353.0
25.198.5453.0
25.198.5553.0
25.198.5653.0
25.198.5753.0
25.198.5853.0
25.198.5953.0
25.198.6053.0
25.198.6153.0
25.198.6253.0
13.05
18.05
23.05
28.05
33.05
38.05
43.05
48.05
53.05
58.05
63.05
5
10
15
20
25
30
35
40
45
50
55
25.198.4253.0
25.198.4353.0
25.198.0253.0
25.198.0353.0
25.198.0453.0
25.198.0553.0
25.198.0653.0
25.198.0753.0
25.198.0853.0
25.198.0953.0
25.198.1053.0
25.198.1153.0
25.198.1253.0
50
50
50
50
50
50
50
50
50
50
50
4
6
8
10
12
14
16
18
20
22
24
25.199.9253.0
25.199.9353.0
25.199.5253.0
25.199.5353.0
25.199.5453.0
25.199.5553.0
25.199.5653.0
25.199.5753.0
25.199.5853.0
25.199.5953.0
25.199.6053.0
25.199.6153.0
25.199.6253.0
13.25
18.33
23.41
28.49
33.57
38.65
43.73
48.81
53.89
58.97
64.05
5.08
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
25.199.4253.0
25.199.4353.0
25.199.0253.0
25.199.0353.0
25.199.0453.0
25.199.0553.0
25.199.0653.0
25.199.0753.0
25.199.0853.0
25.199.0953.0
25.199.1053.0
25.199.1153.0
25.199.1253.0
6
M 3
without insulating plate with insulating plate, without locating cams
Rated cross section:
1.5 mm2
Rated current:
10 A
Wire range:
0.14 – 2.5 mm2single core/
0.14 – 1.5 mm2finely stranded
250 V/4 kV/3 – Overvoltage category III
*690 V/4 kV/2 – Overvoltage category II
1000 V/4 kV/1 – Overvoltage category I
* max. 600 V for non-earthed systems or expected overvoltage
≤4 kV
PCB terminal, rising cage clamp system
pitch 5.00/5.08 mm
Box Qty G T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110
UL Data field-/factory wiring
CSA Data
Approvals
Type 8192 E/8292 E
conductor horizontal to PCB
unmarked
without insulating plate marked
without insulating plate unmarked
with insulating plate
with locating cams
marked
with insulating plate
with locating cams
pitch 5.00 mm
pitch 5.08 mm
Solder pin 0.5 x 1.0 mm
Drill hole Ø 1.2 mm
wiecon
365
with insulating plate, with locating cams
Drilling plan for version with locating cams
unmarked
with insulating plate
without locating cams
marked
with insulating plate
without locating cams
Materials
Insulating housing: PA 66/6 grey, UL 94-V0
Clamping part: nickel plated brass
Contact and solder pin: tin-plated bronze
Clamping screw: galvanised steel
on request on request
on request on request
Part No. Part No.
50
50
50
50
50
50
50
50
50
50
50
4
6
8
10
12
14
16
18
20
22
24
wiecon
wiecon PCB
366
No. 22 – 12 AWG 300 V 20/30 A
No. 22 – 12 AWG 300 V 25 A
üizqwd
25.178.9253.0
25.178.9353.0
25.178.5253.0
25.178.5353.0
25.178.5453.0
25.178.5553.0
25.178.5653.0
25.178.5753.0
25.178.5853.0
25.178.5953.0
25.178.6053.0
25.178.6153.0
25.178.6253.0
13.05
18.05
23.05
28.05
33.05
38.05
43.05
48.05
53.05
58.05
63.05
5
10
15
20
25
30
35
40
45
50
55
25.178.4253.0
25.178.4353.0
25.178.0253.0
25.178.0353.0
25.178.0453.0
25.178.0553.0
25.178.0653.0
25.178.0753.0
25.178.0853.0
25.178.0953.0
25.178.1053.0
25.178.1153.0
25.178.1253.0
50
50
50
50
50
50
50
50
50
50
50
4
6
8
10
12
14
16
18
20
22
24
25.179.9253.0
25.179.9353.0
25.179.5253.0
25.179.5353.0
25.179.5453.0
25.179.5553.0
25.179.5653.0
25.179.5753.0
25.179.5853.0
25.179.5953.0
25.179.6053.0
25.179.6153.0
25.179.6253.0
13.25
18.33
23.41
28.49
33.57
38.65
43.73
48.81
53.89
58.97
64.05
5.08
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
25.179.4253.0
25.179.4353.0
25.179.0253.0
25.179.0353.0
25.179.0453.0
25.179.0553.0
25.179.0653.0
25.179.0753.0
25.179.0853.0
25.179.0953.0
25.179.1053.0
25.179.1153.0
25.179.1253.0
6.5
M 3
without insulating plate with insulating plate, without locating cams
Rated cross section:
2.5 mm2
Rated current:
16 A
Wire range:
0.14 – 4.0 mm2single core/
0.14 – 2.5 mm2finely stranded
250 V/4 kV/3 – Overvoltage category III
*690 V/4 kV/2 – Overvoltage category II
1000 V/4 kV/1 – Overvoltage category I
* max. 600 V for non-earthed systems or expected overvoltage
≤4 kV
PCB terminal, rising cage clamp system
pitch 5.00/5.08 mm
Box Qty G T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110
UL Data field-/factory wiring
CSA Data
Approvals
Type 8191 E/8291 E
conductor horizontal to PCB
unmarked
without insulating plate marked
without insulating plate unmarked
with insulating plate
with locating cams
marked
with insulating plate
with locating cams
pitch 5.00 mm
pitch 5.08 mm
Solder pin 0.9 x 0.9 mm
Drill hole Ø 1.3 mm
wiecon
367
with insulating plate, with locating cams Drilling plan for version with locating cams
unmarked
with insulating plate
without locating cams
marked
with insulating plate
without locating cams
Materials
Insulating housing: PA 66/6 grey, UL 94-V2
Clamping part: nickel plated brass
Contact and solder pin: tin plated E-Cu
Clamping screw: galvanised steel
on request on request
on request on request
Part No. Part No.
1 Z5.543.0153.0 100
2 Z5.543.0253.0 100
04.242.4653.0 50
.
04.242.5053.0 25
04.842.5053.0 25
04.841.2150.0 25
04.242.0850.0 500
04.842.0850.0 500
1 – 12 04.007.4089.0 1
13 – 24 04.007.4189.0 1
25 – 36 04.007.4289.0 1
37 – 48 04.007.4389.0 1
49 – 60 04.007.4489.0 1
61 – 72 04.007.4589.0 1
73 – 84 04.007.4689.0 1
85 – 96 04.007.4789.0 1
97 – 108 04.007.4889.0 1
50
50
50
50
50
50
50
50
50
50
50
4
6
8
10
12
14
16
18
20
22
24
wiecon
wiecon PCB
No. 22 – 12 AWG 300 V 15 A
No. 22 – 14 AWG 300 V 10 A
igqwd
25.131.3253.0
25.131.3353.0
25.131.3453.0
25.131.3553.0
25.131.3653.0
25.131.3753.0
25.131.3853.0
25.131.3953.0
25.131.4053.0
25.131.4153.0
25.131.4253.0
13.36
18.36
23.36
28.36
33.36
38.36
43.36
48.36
53.36
58.36
63.36
5
10
15
20
25
30
35
40
45
50
55
25.130.3253.0
25.130.3353.0
25.130.3453.0
25.130.3553.0
25.130.3653.0
25.130.3753.0
25.130.3853.0
25.130.3953.0
25.130.4053.0
25.130.4153.0
25.130.4253.0
6.5
M 2,5
368
Test plug nominal current = 2 A
Marker tag carrier for 12 pole,
can be divided for smaller pole numbers
Marker strips unmarked
Marked 1 – 10, 11 – 20 etc. 991 – 999
Marking branch
labelled 1, 2, 3 ... 0
Single tag, unmarked
Marked
Adhesive marking strips
(1 sheet = 100 strips)
PCB terminal, rising cage clamp system
pitch 5.00 mm
Box Qty G T Pole Part No. Part No. Pole Part No. Box Qty
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 8190 E
conductor horizontal to PCB
Accessories
Type 8190 E
unmarked
pitch 5.00 mm
Rated cross section:
2.5 mm2
Rated current:
16 A
Wire range:
0.14 – 4.0 mm2single core/
0.14 – 2.5 mm2finely stranded
250 V/4 kV/3 – Overvoltage category III
*690 V/4 kV/2 – Overvoltage category II
1000 V/4 kV/1 – Overvoltage category I
* max. 600 V for non-earthed systems or expected overvoltage
≤4 kV
marked
Solder pin 0.8 x 0.9 mm
Drill hole Ø 1.2 mm
Materials
Insulating housing: PA 6/66, UL 94-V0
Clamping part: galvanised steel
Contact and solder pin: tin plated E-Cu
Clamping screw: galvanised steel
369
wiecon
50
50
50
50
50
50
50
50
20
20
20
6
9
12
15
18
21
24
27
30
33
36
wiecon
wiecon PCB
370
No. 22 – 12 AWG 300 V 20/30 A
No. 22 – 12 AWG 300 V 25 A
üizqwd
25.180.9253.0
25.180.9353.0
25.180.5253.0
25.180.5353.0
25.180.5453.0
25.180.5553.0
25.180.5653.0
25.180.5753.0
25.180.5853.0
25.180.5953.0
25.180.6053.0
25.180.6153.0
25.180.6253.0
12.8
17.8
22.8
27.8
32.8
37.8
42.8
47.8
52.8
57.8
62.8
5
10
15
20
25
30
35
40
45
50
55
25.180.4253.0
25.180.4353.0
25.180.0253.0
25.180.0353.0
25.180.0453.0
25.180.0553.0
25.180.0653.0
25.180.0753.0
25.180.0853.0
25.180.0953.0
25.180.1053.0
25.180.1153.0
25.180.1253.0
50
50
50
50
50
50
50
50
20
20
20
6
9
12
15
18
21
24
27
30
33
36
25.181.9253.0
25.181.9353.0
25.181.5253.0
25.181.5353.0
25.181.5453.0
25.181.5553.0
25.181.5653.0
25.181.5753.0
25.181.5853.0
25.181.5953.0
25.181.6053.0
25.181.6153.0
25.181.6253.0
12.70
17.78
22.86
27.94
33.02
38.10
43.18
48.26
53.34
58.42
63.50
5.08
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
25.181.4253.0
25.181.4353.0
25.181.0253.0
25.181.0353.0
25.181.0453.0
25.181.0553.0
25.181.0653.0
25.181.0753.0
25.181.0853.0
25.181.0953.0
25.181.1053.0
25.181.1153.0
25.181.1253.0
6.5
M 3
without insulating plate
Rated cross section:
2.5 mm2
Rated current:
16 A
Wire range:
0,14 – 4.0 mm2single core/
0.14 – 2.5 mm2finely stranded
250 V/4 kV/3 – Overvoltage category III
*690 V/4 kV/2 – Overvoltage category II
1000 V/4 kV/1 – Overvoltage category I
* max. 600 V for non-earthed systems or expected overvoltage
≤4 kV
PCB terminal, rising cage clamp system
pitch 5.00/5.08 mm
Box Qty G T Pole Part No. Part No. Part No. Part No.
Rated voltages VDE 0110
UL Data field-/factory wiring
CSA Data
Approvals
Type 8191 D/8291 D
conductor horizontal to PCB
unmarked
without insulating plate marked
without insulating plate unmarked
with insulating plate
with locating cams
Marked
with insulating plate
with locating cams
pitch 5.00 mm
pitch 5.08 mm
Solder pin 0.9 x 0.9 mm
Drill hole Ø 1.3 mm
wiecon
371
with insulating plate, without locating cams with insulating plate, with locating cams
Drilling plan for version with locating cams
unmarked
with insulating plate
without locating cams
marked
with insulating plate
without locating cams
Materials
Insulating housing: PA 66/6 grey, UL 94-V0
Clamping part: nickel plated brass
Contact and solder pin: tin plated E-Cu
Clamping screw: galvanised steel
on request on request
on request on request
Part No. Part No.
2 PE + 4
3 PE + 6
4 PE + 8
5 PE + 10
6 PE + 12
7 PE + 14
8 PE + 16
9 PE + 18
10 PE + 20
50
50
50
50
50
50
50
20
20
6
9
12
15
18
21
24
27
30
wiecon
wiecon PCB
.
No. 30 – 14 AWG 300 V 10 A No. 20 – 12 AWG for PE
No. 30 – 14 AWG 300 V 10 A No. 20 – 12 AWG for PE
qw
25.153.2253.0
25.153.2353.0
25.153.2453.0
25.153.2553.0
25.153.2653.0
25.153.2753.0
25.153.2853.0
25.153.2953.0
25.153.3053.0
12.50
17.50
22.50
27.50
32.50
37.50
42.50
47.50
52.50
7.50
12.50
17.50
22.50
27.50
32.50
37.50
42.50
47.50
50
50
50
50
50
50
50
50
20
25.153.6253.0
25.153.6353.0
25.153.6453.0
25.153.6553.0
25.153.6653.0
25.153.6753.0
25.153.6853.0
25.153.6953.0
25.153.7053.0
25.153.0253.0
25.153.0353.0
25.153.0453.0
25.153.0553.0
25.153.0653.0
25.153.0753.0
25.153.0853.0
25.153.0953.0
25.153.1053.0
25.153.4253.0
25.153.4353.0
25.153.4453.0
25.153.4553.0
25.153.4653.0
25.153.4753.0
25.153.4853.0
25.153.4953.0
25.153.5053.0
6
M 3
372
1.5 mm2
1.5 mm2
2.5 mm2
11 earth + 33 up to 20 earth + 60 on request
33 to 60 pole on request
PCB terminal, rising cage clamp system
pitch 5.00 mm
Box Qty G T Pole Part No. Part No.
Rated voltages VDE 0110
UL Data field-/factory wiring
CSA Data
Approvals
Type 8195 D/...
conductor horizontal to PCB
unmarked
pitch 5.00 mm
Rated cross section:
1.5 mm2, earth 2.5 mm2
Rated current:
10 A
Wire range:
0.5 – 2.5 mm2single core 0.5 – 4.0 mm2(earth)
0.5 – 1.5 mm2finely stranded 0.5 – 2.5 mm2(earth)
250 V/4 kV/3 – Overvoltage category III
*690 V/4 kV/2 – Overvoltage category II
1000 V/4 kV/1 – Overvoltage category I
* max. 600 V for non-earthed systems or expected overvoltage
≤4 kV
Type 8195 D/... VB1
unmarked
Sensor terminals
pitch 5.00 mm jumpered
marked
marked
Solder pin 0.5 x 1.0 mm
Drill hole Ø 1.2 mm Materials Type 8195 D/... and
Type 8195 V/...
Insulating housing: PA 6/66, UL 94-V0
Clamping part: nickel plated brass
Contact and solder pin: tinned
Clamping screw: galvanised steel
373
wiecon
No. 30 – 14 AWG 300 V 10 A No. 20 – 12 AWG for PE
No. 30 – 14 AWG 300 V 10 A No. 20 – 12 AWG for PE
qw
6
M 3
1.5 mm2
1.5 mm2
2.5 mm2
1.5 mm2
2 PE + 6
3 PE + 9
4 PE + 12
5 PE + 15
6 PE + 18
7 PE + 21
8 PE + 24
9 PE + 27
10 PE + 30
50
50
50
50
50
50
50
20
20
8
12
16
20
24
28
32
36
40
25.154.2253.0
25.154.2353.0
25.154.2453.0
25.154.2553.0
25.154.2653.0
25.154.2753.0
25.154.2853.0
25.154.2953.0
25.154.3053.0
12.50
17.50
22.50
27.50
32.50
37.50
42.50
47.50
52.50
7.50
12.50
17.50
22.50
27.50
32.50
37.50
42.50
47.50
50
50
50
50
50
50
50
50
20
25.154.6253.0
25.154.6353.0
25.154.6453.0
25.154.6553.0
25.154.6653.0
25.154.6753.0
25.154.6853.0
25.154.6953.0
25.154.7053.0
25.154.0253.0
25.154.0353.0
25.154.0453.0
25.154.0553.0
25.154.0653.0
25.154.0753.0
25.154.0853.0
25.154.0953.0
25.154.1053.0
25.154.4253.0
25.154.4353.0
25.154.4453.0
25.154.4553.0
25.154.4653.0
25.154.4753.0
25.154.4853.0
25.154.4953.0
25.154.5053.0
Rated cross section:
1.5 mm2, earth 2.5 mm2
Rated current:
10 A
Wire range:
0.5 – 2.5 mm2single core 0.5 – 4.0 mm2(earth)
0.5 – 1.5 mm2finely stranded 0.5 – 2.5 mm2(earth)
250 V/4 kV/3 – Overvoltage category III
*690 V/4 kV/2 – Overvoltage category II
1000 V/4 kV/1 – Overvoltage category I
* max. 600 V for non-earthed systems or expected overvoltage
≤4 kV
Box Qty G T Pole Part No. Part No.
Rated voltages VDE 0110
UL Data field-/factory wiring
CSA Data
Approvals
Type 8195 V/...
conductor horizontal to PCB
Drilling plan Type 8195 D/... and
Type 8195 V/...
Solder pin 0.5 x 1.0 mm
Drill hole Ø 1.2 mm
11 earth + 33 to 20 earth + 60 on request
44 to 80 pole on request
unmarked
pitch 5.00 mm
Type 8195 V/... VB1
unmarked
Sensor terminals
pitch 5.00 mm jumpered
marked
marked
wiecon
wiecon PCB
374
No. 22/30 – 10 AWG 300 V 30/35 A
No. 22 – 10 AWG 300 V 30 A
izrqwd
10025.700.0153.08375
50
10
25
25
25
500
500
07.300.2753.0
Z5.553.2921.0
04.242.7553.0
04.842.7553.0
04.841.2150.0
04.242.0850.0
04.842.0850.0
ST 2/2,3
9705 A/7,5/10
9705 A/7,5/10 B
9704 A/1-0 B
9705 A
9705 AB
9
M 3
PCB terminal, rising cage clamp system
pitch 7.50 mm
Individual poles connected in series 1 pole
Type Part No. Box Qty
Rated voltages VDE 0110
UL Data field-/factory wiring
CSA Data
Approvals
Type 8375
conductor horizontal to PCB
pitch 7.50 mm
Accessories
Rated cross section:
4.0 mm2
Rated current:
30 A
Wire range:
0.14 – 6.0 mm2single core/
0.14 – 4.0 mm2finely stranded
Rated voltages
pitch7.50 mm
500 V/6 kV/3 – Overvoltage category III
1000 V/6 kV/2 – Overvoltage category II
1000 V/6 kV/1 – Overvoltage category I
pitch10.00 mm, UL 600 V, CSA 600 V
690 V/8 kV/3 – Overvoltage category III
1000 V/8 kV/2 – Overvoltage category II
1000 V/8 kV/1 – Overvoltage category I
10025.700.0153.08375
unmarked
1)marked
labelled 1, 2, 3 ... 0
unmarked
1)marked
Pitch intermediate plate
(increases pitch from 7.50 to 10.00 mm)
Test plug red
Marking strips
1 – 10, 11 – 20 etc. 991 – 999
Marking branch
Single tag
1) Labelling on request
pitch 10.00 mm
Solder pin 0.8 x 1.0 mm
Drill hole Ø 1.3 mm
Materials
Insulating housing: PA 66/6 grey,
UL 94-V0
Clamping part: galvanised steel
Contact and solder pin:
tin plated E-Cu
Clamping screw: galvanised steel
375
wiecon
No. 22 – 8 AWG 300 V 10 A
No. 22 – 8 AWG 300 V 10 A
qw
10
M 4
50
50
50
1
3
4
27.002.6153.0
27.002.6353.0
27.002.6453.0
10.16
30.48
40.64
20.32
30.48
Box Qty G T Pole Part No.
Rated voltages VDE 0110
UL Data field-/factory wiring
CSA Data
Approvals
Type 7573 L2.../W
Rated cross section: 10.0 mm2
Rated current: 59 A
(based on ambient temperature 20 °C rated cross section and max.
number of poles)
Wire range:
0.50 – 10.0 mm2single core and finely
stranded
400 V/6 kV/3 – Overvoltage category III
690 V/6 kV/2 – Overvoltage category II
1000 V/6 kV/1 – Overvoltage category I
Solder pin 1.2 x 1.4 mm
Drill hole Ø 1.6 mm
unmarked
pitch 10.16 mm
32
20,32
G
T
19
4,5
10,16
Type 7572 L2
No. 22 – 8 AWG
300/150 V
10/40 A
No. 22 – 8 AWG 300 V 10 A
qw
12
M 4
No. 22 – 8 AWG
300/150 V
10/40 A
No. 22 – 8 AWG 300 V 10 A
qw
12
M 4
wiecon
wiecon PCB
376
50
50
2
3
27.002.2253.0
27.002.2353.0
27.002.0253.0
27.002.0353.0
20.32
30.48
10.16
20.32
Type 7572 L4
Solder pin 1.2 x 1.2 mm
Drill hole Ø 1.6 mm
4 solder pins
Solder pin 1.2 x 1.2 mm
Drill hole Ø 1.6 mm
2 solder pins
PCB terminal, rising cage clamp system
pitch 10.16 mm
Box Qty G T Pole Part No. Part No.
Rated voltages VDE 0110
UL Data field-/factory wiring
CSA Data
Approvals
Rated cross section:
10 mm2
Rated current:
57 A
(based on ambient 20˚C, rated cross section and max. number of
poles)
Wire range:
0.50 – 16.0 mm2single core/
0.50 – 10.0 mm2finely stranded
Rated voltages
4 solder pins
250 V/4 kV/3 – Overvoltage category III
400 V/4 kV/2 – Overvoltage category III
630 V/4 kV/2 – Overvoltage category II
2 solder pins
630 V/8 kV/3 – Overvoltage category III
800 V/8 kV/2 – Overvoltage category III
1000 V/8 kV/2 – Overvoltage category II
pitch 10.16 mm unmarked unmarked
G
T
10,16
28,5
4,5
18,3
G
T
28,54,5
18,3
10,16
wiecon
377
qw
12
M 4
50
50
2
3
27.002.4253.0
27.002.4353.0
30.48
50.64
20.32
40.48
Type 7572 L2
No. 22 – 6 AWG 600 V 60 A
Solder pin 1.2 x 1.2 mm
Drill hole Ø 1.6 mm
Box Qty G T Pole Part No.
Rated voltages VDE 0110
Approvals
Rated cross section:
10 mm2
Rated current:
57 A
(based on ambient temperature 20 °C rated cross section and max.
number of poles)
Wire range:
0.50 – 16.0 mm2single core/
0.50 – 10.0 mm2finely stranded
Rated voltages
1000 V/8 kV/3 – Overvoltage category III
pitch 20.32 mm unmarked
20,32
4,5 28,5
18,3
G
T
wiecon
wiecon PCB
378
No. 30 – 14 AWG 300 V 15/23 A
No. 30 – 14 AWG 300 V 20 A
qw
10025.720.1353.08276 10025.720.1453.08276 TKS
10
Z5.553.2921.0
ST 2/2,3
6
M 3
No. 30 – 14 AWG 300 V 15 A
No. 30 – 14 AWG 300 V 15 A
qw
6
M 3
1 – 12 04.007.4089.0 1
13 – 24 04.007.4189.0 1
25 – 36 04.007.4289.0 1
37 – 48 04.007.4389.0 1
49 – 60 04.007.4489.0 1
61 – 72 04.007.4589.0 1
73 – 84 04.007.4689.0 1
85 – 96 04.007.4789.0 1
97 – 108 04.007.4889.0 1
10
Z5.553.2921.0
ST 2/2,3
1 – 12 04.007.4089.0 1
13 – 24 04.007.4189.0 1
25 – 36 04.007.4289.0 1
37 – 48 04.007.4389.0 1
49 – 60 04.007.4489.0 1
61 – 72 04.007.4589.0 1
73 – 84 04.007.4689.0 1
85 – 96 04.007.4789.0 1
97 – 108 04.007.4889.0 1
PCB terminal, rising cage clamp system
pitch 5.08 mm
Individual poles connected in series 1 pole
Pole numbers latched together on request
Type Part No. Box Qty Type Part No. Box Qty
Rated voltages VDE 0110
UL Data field-/factory wiring
CSA Data
Approvals
Type 8276
modular terminal
pitch 5.08 mm
Accessories
Rated cross section:
4.0 mm2single core/
2.5 mm2finely stranded
Rated current Type 8276: 26 A
Rated current Type 8276 TKS: 15 A
Wire range:
0.14 – 4.0 mm2single core/
0.14 – 2.5 mm2finely stranded
250 V/4 kV/3 – Overvoltage category III
400 V/4 kV/2 – Overvoltage category II
1000 V/4 kV/1 – Overvoltage category I
Adhesive marking strips
Test plug red
Solder pin 0.8 x 1.1 mm
Drill hole Ø 1.4 mm
Materials Type 8276
Insulating housing: PA 66/6 grey,
UL 94-V0
Clamping part: nickel plated brass
Contact and solder pin:
tin plated E-Cu
Clamping screw: galvanised steel
Materials Type 8276 TKS
Insulating housing: PA 66/6 grey,
UL 94-V0
Disconnect component:
PA 66/6 orange, UL 94-V-0
Clamping part: nickel plated brass
Contact spring and solder pin:
special copper alloy, tin plated
Clamping screw: galvanised steel
Isolating blade: tin plated E-Cu
Type 8276 TKS
disconnect terminal
Solder pin 0.8 x 1.1 mm
Drill hole Ø 1.4 mm
379
wiecon
No. 30 – 14 AWG 300 V 6.3 A
No. 30 – 14 AWG 300 V 6.3 A
qw
DIN VDE 0820 T2
10025.720.1653.08276 Si-D
10
Z5.553.2921.0
ST 2/2,3
6
M 3
1 – 12 04.007.4089.0 1
13 – 24 04.007.4189.0 1
25 – 36 04.007.4289.0 1
37 – 48 04.007.4389.0 1
49 – 60 04.007.4489.0 1
61 – 72 04.007.4589.0 1
73 – 84 04.007.4689.0 1
85 – 96 04.007.4789.0 1
97 – 108 04.007.4889.0 1
04.007.3989.0 1
PCB terminal, rising cage clamp system
pitch 5.08 mm
Individual poles connected in series 1 pole
Pole numbers latched together on request
Type Part No. Box Qty
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 8276 Si-D
modular fuse terminal (for Si 5 x 20)
pitch 5.08 mm
Accessories
Rated cross section:
2.5 mm2
Rated current:
6.3 A**
Wire range:
0.14 – 4.0 mm2single core/
0.14 – 2.5 mm2finely stranded
250 V/4 kV/3 – Overvoltage category III
*690 V/4 kV/2 – Overvoltage category II
1000 V/4 kV/1 – Overvoltage category I
* max. 600 V for non-earthed systems or expected overvoltage
≤4 kV
** voltage and current are determined by the fuse link used
6.3 A up to a power loss of 1.6 W
IEC 60 127-2/ DIN VDE 0820 T2 should be
observed when selecting and using fuse link
Adhesive marking strips
Unmarked for customised labelling
Test plug red
Solder pin 0.8 x 1.1 mm
and 0.5 x 1.1 mm
Drill hole Ø 1.4 mm
Materials Type 8276 Si-D
Insulating housing: PA 66/6 grey,
UL 94-V0
Fuse holder:
PA 66/6 orange, UL 94-V0
Clamping part: nickel plated brass
Contact and solder pin:
special copper alloy, tin plated
Contact spring and solder pin:
special copper alloy, tin plated
Clamping screw: galvanised steel
wiecon
wiecon PCB
380
Type 8105 B, RAST 5 Technology,
PCB plug-in terminal, tab connector
Technical progress has probably seen the
fastest advances in recent times in areas
of electronics. Devices have become more
sophisticated, requiring large
numbers of components for functionality.
To make them work together, printed
circuit boards are used. For fitting these,
Wieland Electric offer plug-in printed
circuit board screw terminals with a
RAST 5 system which, combined with
the corresponding tab connectors can be
connected indirectly.
Fixed coding (without coding strip of type
8105) is designed in accordance with the
RAST 5 standard and corresponds to all
known requirements that have been drawn
up for ‘white goods’. The same also
applies to the standard variants that, apart
from being connected horizontally, can
also be connected vertically left and right
or as tab connectors in a straight line.
They are all based on a rated current of
10A. The range extends from 2 – 7 poles.
The conductor connection can be carried
out with finely stranded 0.14 mm2–
2.5 mm2, with or without ferrules, and
as a single-core from 0.14 mm2– 4 mm2.
wiecon
381
8105 8105 8105 8105 8105
B/... C... B/...C...VR B/...C...VL F/...GC... F/WC...
mm 5.00 5.00 5.00 5.00 5.00
mm22.5 2.5 2.5 – –
2 – 7 2 – 7 2 – 7 2 – 7 2 – 7
Page 382 Page 382 Page 383 Page 383 Page 383
Type
pitch
cross section
pole
RAST 5
coding diagram
Positioning
Latching
Coding
No. 26 – 12 AWG 300 V 10 A
No. 26 – 12 AWG 300 V 10 A
üK
No. 26 – 12 AWG 300 V 10 A
No. 26 – 12 AWG 300 V 10 A
üK
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
C0
C1
C2
C3
C4
C5
C6
C7
C0
C1
C2
C3
C4
C5
C6
C7
C0
C1
C2
C3
C4
C5
C6
C0
C1
C2
C0
C1
C2
C0
C1
C2
wiecon
wiecon PCB
15.000.0253.0
15.001.0253.0
15.002.0253.0
15.003.0253.0
15.004.0253.0
15.005.0253.0
15.006.0253.0
15.007.0253.0
15.000.0353.0
15.001.0353.0
15.002.0353.0
15.003.0353.0
15.004.0353.0
15.005.0353.0
15.006.0353.0
15.007.0353.0
15.000.0453.0
15.001.0453.0
15.002.0453.0
15.003.0453.0
15.004.0453.0
15.005.0453.0
15.006.0453.0
15.000.0553.0
15.001.0553.0
15.002.0553.0
15.000.0653.0
15.001.0653.0
15.002.0653.0
15.000.0753.0
15.001.0753.0
15.002.0753.0
15.020.0253.0
15.021.0253.0
15.022.0253.0
15.023.0253.0
15.024.0253.0
15.025.0253.0
15.026.0253.0
15.027.0253.0
15.020.0353.0
15.021.0353.0
15.022.0353.0
15.023.0353.0
15.024.0353.0
15.025.0353.0
15.026.0353.0
15.027.0353.0
15.020.0453.0
15.021.0453.0
15.022.0453.0
15.023.0453.0
15.024.0453.0
15.025.0453.0
15.026.0453.0
15.020.0553.0
15.021.0553.0
15.022.0553.0
15.020.0653.0
15.021.0653.0
15.022.0653.0
15.020.0753.0
15.021.0753.0
15.022.0753.0
2
3
4
5
6
7
382
7.0
M 3
7.0
M 3
RAST 5
pluggable PCB terminal, pitch 5.00 mm
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Type 8105 B/... C... OB Type 8105 B/... C... VR OB
unmarked
pluggable PCB terminal/header
Rated cross section:
2.5 mm2
Rated current: 10 A
Wire range:
0.20 – 4.0 mm2single core/
0.14 – 2.5 mm2finely stranded
250 V/4 kV/3 – overvoltage category III
400 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
unmarked
Box Qty Poles Coding Part No. Part No.
No. 26 – 12 AWG 300 V 10 A
No. 26 – 12 AWG 300 V 10 A
üK
11.8
11.8
11.8
11.8
11.8
11.8
11.8
11.8
16.8
16.8
16.8
16.8
16.8
16.8
16.8
16.8
21.8
21.8
21.8
21.8
21.8
21.8
21.8
26.8
26.8
26.8
31.8
31.8
31.8
36.8
36.8
36.8
12
12
12
12
12
12
12
17
17
17
17
17
17
17
22
22
22
22
22
22
27
27
32
32
37
37
5
5
5
5
5
5
5
5
10
10
10
10
10
10
10
10
15
15
15
15
15
15
15
20
20
20
25
25
25
30
30
30
No. 26 – 12 AWG 300 V 10 A
No. 26 – 12 AWG 300 V 10 A
ü
15.010.0253.0
15.011.0253.0
15.012.0253.0
15.013.0253.0
15.014.0253.0
15.015.0253.0
15.016.0253.0
15.017.0253.0
15.010.0353.0
15.011.0353.0
15.012.0353.0
15.013.0353.0
15.014.0353.0
15.015.0353.0
15.016.0353.0
15.017.0353.0
15.010.0453.0
15.011.0453.0
15.012.0453.0
15.013.0453.0
15.014.0453.0
15.015.0453.0
15.016.0453.0
15.010.0553.0
15.011.0553.0
15.012.0553.0
15.010.0653.0
15.011.0653.0
15.012.0653.0
15.010.0753.0
15.011.0753.0
15.012.0753.0
15.301.0258.9
15.302.0258.9
15.303.0258.9
15.304.0258.9
15.305.0258.9
15.306.0258.9
15.307.0258.9
15.301.0358.9
15.302.0358.9
15.303.0358.9
15.304.0358.9
15.305.0358.9
15.306.0358.9
15.307.0358.9
15.301.0458.9
15.302.0458.9
15.303.0458.9
15.304.0458.9
15.305.0458.9
15.306.0458.9
15.301.0558.9
15.302.0558.9
15.301.0658.9
15.302.0658.9
15.301.0758.9
15.302.0758.9
15.311.0258.9
15.312.0258.9
15.313.0258.9
15.314.0258.9
15.315.0258.9
15.316.0258.9
15.317.0258.9
15.311.0358.9
15.312.0358.9
15.313.0358.9
15.314.0358.9
15.315.0358.9
15.316.0358.9
15.317.0358.9
15.311.0458.9
15.312.0458.9
15.313.0458.9
15.314.0458.9
15.315.0458.9
15.316.0458.9
15.311.0558.9
15.312.0558.9
15.311.0658.9
15.312.0658.9
15.311.0758.9
15.312.0758.9
10
10
10
10
10
10
10
10
15
15
15
15
15
15
15
15
20
20
20
20
20
20
20
25
25
25
30
30
30
35
35
35
383
wiecon
7.0
M 3
Part No. Box Qty G1 G2 G3 T Part No. Part No.
Type 8105 B/... C... VL OB Type 8105 F/... GC ... OB /
8105 F/... WC... OB
unmarked RAST 5 unmarked unmarked
Drilling hole, component size
Positioning pins are omitted from design
8105 F/... WC ...OB
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
RAST 5
PCB header
wiecon
384
wiecon PCB
Customer specific
connection modules with
RAST 5 technology
Main area of application:
RAST 5 technology: “White” and “Brown”
goods
Main benefits of RAST 5 :
• fixed integrated coding
• incorrect connections are not possible
• variety of colours available
(benefit: immediate assignment of socket
and plug component
• optimum for on-site installations
Wieland offers customer specific
modifications e.g. single part
RAST 5
connection modules
• integrated jumper rail
(e.g. earth conductor)
• socket and plug components in the
connection module for potential
distribution
(guideline: socket must always be the
conducting component)
• any combination of plugs/sockets with
variable number of poles
• variety of colours
RAST 5 technology
Equipotential distribution board for PCB, pitch 5.00 mm
Type 8105 BF/3/4
üK
385
wiecon
10099.243.3564.7 100
100
99.239.3564.7
99.259.3564.7
Type Part No. Box Qty Type Part No. Box Qty
Rated voltages VDE 0110
UL Da ta
CSA Data – pending
Approvals
pitch 5.00 mm
Rated cross section:
2.5 mm2
Rated current: 10 A
Wire range:
0.14 – 4.0 mm2single core/
0.14 – 2.5 mm2finely stranded
250 V/2.5 kV/3 – overvoltage category III
*690 V/2.5 kV/2 – overvoltage category II
1000 V/2.5 kV/1 – overvoltage category I
No. of poles: 2 – 7
* max. 600 V for non-earthed systems or expected overvoltage
≤4 kV
100
plug component
with strain relief,
white
socket component
with strain relief,
green
plug component socket component
wiecon
wiecon TER
386
The time consuming task of feeding
through various external cables into the
control cabinet has come to an end.
With its termination module, Wieland has
developed a cost effective and simple
wiring method for modular installation.
Modular RAST 5 control cabinet glanding
with secure connection.
The principal aim is to optimise production
of multiple installations with this wiring
system by using cable assemblies with
coded plugs.
A 100% testing of the cables and coding
enables production that saves both time
and costs.
Benefits compared to the conventional
screw gland:
• installation time reduced by up to 80 %
compared to conventional methods
• time and cost savings due to pre-
assembled cables
• glanding with IP 54 protection
• error rate is zero as it is impossible to
make a wrong connection
• specialist personnel are not required to
connect the external wiring
Termination modules
TM 6 / TM 12
Termination modules in
RAST 5 technology (IP 54)
for series installation
External wiring
Internal wiring
wiecon
387
All these types are coded to ensure a
reliable connection i.e. there are no
identical slots within a moduleand there
are 2 variants of each type.
Cable types of external cables
The following standard cable types are
available:
• Ölflex Quattro 150 in the pole numbers
3/4/5 pole
• Ölflex quattro 150 CY (shield version) in
the pole numbers 3/4/5 pole
The quantity of possible combinations of
modules, codes and cables makes it
possible to implement a variety of
customer-specific wiring solutions.
Special module variants and cables are
also possible.
To test the variety of possible
variations, it is possible to order the
function set TM 6-5 with cables.
Technical data of the TM modules and
external cables
Wire range: 1.5 mm2(Standard)
Rated voltage:
250 V/4 kV/3 – overvoltage category III
Rated current intensity: 10 A
Approvals in preparation:
UL, CSA and VDE
Application of the TM Module 6/12 in
the control cabinet
The external RAST 5 connectors are
available as 3 to 5 pole and prevent any
errors during connection due to the
secure coding system. The fixing of
labels ensures that each plug can be
rapidly assigned to the respective socket
for modules with higher pole numbers.
The external connecting cables with
special plugs which provide insulation with
protection type IP 54, are supplied as
prefabricated with the cable types required
by the customer.
There is also the possibility of attaching
further components to the other end of
the cable such as outlet boxes e.g.
temperature transducers.
The internal wiring is carried out either
using cables with insulated
• RAST 5 push-on blade
• RAST 5 screwed bush
• RAST 5 crimp connector
System configuration
There are 2 basic modules
• Module with 6 slots = TM 6
• Module with 12 slots = TM 12
TM 6
The TM 6 module has the following
variants
• 6 slots 3 pole = Type TM 6-3
• 6 slots 4 pole = Type TM 6-4
• 6 slots 5 pole = Type TM 6-5
TM 12
The TM 12 module has the following
variants 12 slots in two rows of 6
• 3 pole / 3 pole = Type TM 12-33
• 3 pole / 4 pole = Type TM 12-34
• 4 pole / 4 pole = Type TM 12-44
• 3 pole / 5 pole = Type TM 12-35
Modular terminals
Switchgear
Modular terminals
Exterior wall
Cable assemblies
Switchgear
wiecon
wiecon TER
388
Type TM 6-3Type TM 6-5 F Type TM 6-4
auf AnfrageTM 6-3 99.483.0000.0TM 6-5 F TM 6-4
35
41,5
Function set, consisting of
1 x TM 6-5 including cable set 6 x 10 m Ölflex
Quattro cable 5 x 1.5 mm2
with a 5 pole plug in the blade version
Overall dimensions, steel cutout and drill hole
configuration are identical for all TM6 variants
Function set TM 6
Type
Part No. Box Qty Type Part No. Box Qty Type Part No. Box Qty
coding on request
on request on request
coding on request
6 slots 3 pole =
Type TM 6-3
6 slots 4 pole =
Type TM 6-4
Drill hole
D = 3.8
for self tapping screw
05.084.0212.0
wiecon
389
Type TM 6-5
15.800.9956.0TM 6-X 05.562.5957.1
05.562.6557.1
05.562.8257.1
TM 6-5
Type Part No. Box Qty Type Part No. Box Qty Type Part No. Box Qty
TM 6 Cover
suitable for all pole combinations
Sealing plug
3 pole
4 pole
5 pole
on request
coding on request
6 slots 5 pole =
Type TM 6-5
wiecon
wiecon TER
390
Type TM 12-33 Type TM 12-44
TM 12-34 TM 12-33 TM 12-44
Type TM 12-34
80
87,5
Function set TM 12
Type Part No. Box Qty Type Part No. Box Qty Type Part No. Box Qty
on request
coding on request
on request
coding on request
on request
coding on request
12 slots in two rows of 6
3 pole/3 pole =
Type TM 12-33
12 slots in two rows of 6
3 pole/4 pole =
Type TM 12-34
12 slots in two rows of 6
4 pole/4 pole =
Type TM 12-44
Overall dimensions, steel cutout and drill hole
configuration are identical for all 6 variants
Drill hole
D = 3.8
for self tapping screw
05.084.0212.0
wiecon
391
Type TM 12-55
15.800.8856.0TM 12-XXTM 12-35 05.562.5957.1
05.562.6557.1
05.562.8257.1
Type Part No. Box Qty Type Part No. Box Qty Type Part No. Box Qty
TM 12 cover
suitable for all pole combinations TM 12-XX
Sealing plug
on request
coding on request
12 slots in two rows of 6
3 pole/5 pole =
Type TM 12-35
3 pole
4 pole
5 pole
Type 8113 BSK/2
No. 20 – 18 AWG 300 V 3 A
No. 20 – 18 AWG 300 V 3 A
K
wiecon
wiecon ASI
392
100
100
100
100
25.399.9853.0
25.399.9853.8
25.399.9853.5
04.240.0953.0
Node connector (insulation displacement technology)
pitch 5.00/5.08 mm
Type Part No. Box Qty
Rated voltages VDE 0110
UL D ata field-/factory wiring
CSA Data
Approvals
Rated cross section:
0.75 mm2
Rated current:
3 A
Wire range:
0.50 – 0.75 mm2finely stranded
250 V/4 kV/3 – overvoltage category III
400 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
Current range:
3 mA to 3 A
2 pole
black
yellow
red
(colour of socket base: grey)
green
ASI node connector
Cap
Cap
Cap
Marker tag
pitch 5.00/5.08 mm
solder pin 1.0 x 1.0 mm
drill hole Ø 1.4 mm
Conductors with PVC and EARTH insulated
cores can be connected. Others available on
request. The wire diameter of the finely
stranded copper conductor must be at least
0.2 mm. The norm DIN VDE 0295 applies to
the structure of the wire.
393
wiecon
Type 8113 S/... G, 8213 S/... G
Connection vertical to PCB
No. 22 – 12 AWG 250 V 15 A
No. 22 – 12 AWG 300 V 12 A
qwüid
100 2 25.330.3253.011.40 5
100 2 25.350.3253.011.56 5.08
PCB header
pitch 5.00/5.08 mm
Box Qty G T Pole Part No.
Rated voltages VDE 0110
UL Da ta
CSA Data
Approvals
Rated current:
12 A
250 V/4 kV/3 – overvoltage category III
400 V/4 kV/2 – overvoltage category II
1000 V/4 kV/1 – overvoltage category I
solder pin 1.0 x 1.0 mm
drill hole Ø 1.4 mm
ASI branch connector with insulation
piercing technology
The ASI connector has been developed for
both ASI bus systems and LON and EIBA
systems. In these systems, auxiliary
voltage and information are transmitted
simultaneously via the two cores of the
bus cable.
The ASI node connector, a plug-in PCB
terminal with insulation displacement
technology, ensures that the required
signal to the actuator or sensor is picked
up.
The wiring of the ASI node connector is
both simple and effective:
The two cables are laid in the open
terminal compartment of the connector
and the cover is then pressed into position
with a pair of pliers that closes vertically –
the connection is then made.
The connection to the PCB is established
by plugging onto a 2 pole header.
Note: The considerably more cost-
effective standard wire is used here
instead of the ASI special cable.
Materials
Insulating component: PA 66/6
CI-Index: ≥600
Fire protection class: UL 94-V-2
Contact components
Surface of material: special copper alloy
Processing:
Special tools for large scale wiring
available on request
unmarked
pitch 5.00 mm
unmarked
pitch 5.08 mm
9705 A/5/10 04.242.5053.0 25
9705 A/5/10 B 04.842.5053.0 25
9705 AL/5/10 04.242.5153.0 25
9705 A/5/9 B 04.842.4953.0 25
1 ... 9
wiecon
wiecon
394
9705 A/5/10/5 B 04.842.5553.0 25
04.242.1050.0 200
9705 A 04.242.0850.0 500
9705 AB 04.842.0850.0 500
9705 AL 04.242.1553.0 500
9705 ALB 04.842.1553.0 500
unmarked
marked*
with enlarged labelling area
* indicate required marking tag in addition
to part number
Packing unit = 25 strips
= 250 tags
Marking strips
pitch 5 mm
Marking of the strips:
1 ... 9
Packing unit = 25 strips
= 225 tags
Marking material
Material:
Polyamide 66/6
Colour: black figures on a white background
Type Part No. Box Qty Type Part No. Box Qty Type Part No. Box Qty
Marking strips
pitch 10 mm
3 digit
marker tag single tag
Marking tags for WEB empty hou-
sing
unmarked
marked*
* indicate required marking tag in addition
to part number
Packing unit = 500 tags
8 digit
marker tag single tag
unmarked
marked*
* indicate required marking tag in addition
to part number
Packing unit = 500 tags
Marking strips
pitch 10 mm
395
wiecon
1111111111
2222222222
3333333333
444444 444 4
55555 55555
6666666666
7777777777
88888 88888
9999999999
000000000 0
1234567890
AAAAAAAAAA
BBBBBBBBBB
CCCCCCCCCC
DDDDDDDDDD
EEEEEEEEEE
FFFFFFFFFF
GGGGGGGGGG
HHHHHHHHHH
IIIIIIIIII
JJJJJJJJJJ
KKKKKKKKKK
LLLLLLLLLL
MMMMMMMMMM
NNNNNNNNNN
OOOOOOOOOO
PPPPPPPPPP
QQQQQQQQQQ
RRRRRRRRRR
SSSSSSSSSS
TTTTTTTTTT
UUUUUUUUUU
VVVVVVVVVV
WWWWWWWWWW
XXXXXXXXXX
YYYYYYYYYY
ZZZZZZZZZZ
aaaaaaaaaa
bbbbbbbbbb
cccccccccc
dddddddddd
eeeeeeeeee
ffffffffff
gggggggggg
hhhhhhhhhh
iiiiiiiiii
jjjjjjjjjj
kkkkkkkkkk
llllllllll
mmmmmmmmmm
nnnnnnnnnn
oooooooooo
pppppppppp
qqqqqqqqqq
rrrrrrrrrr
ssssssssss
tttttttttt
uuuuuuuuuu
vvvvvvvvvv
wwwwwwwwww
xxxxxxxxxx
yyyyyyyyyy
zzzzzzzzzz
+ + + + + + + + + +
– – – – – – – – – –
/ / / / / / / / / /
. . . . . . . . . .
1 1 1 ... 0 0 0
A A A ... Z Z Z
a a a ... z z z
9704 A 04.241.1150.0 25
9704 A/1 B 04.841.1150.0 25
9704 A/2 B 04.841.1250.0 25
9704 A/3 B 04.841.1350.0 25
9704 A/4 B 04.841.1450.0 25
9704 A/5 B 04.841.1550.0 25
9704 A/6 B 04.841.1650.0 25
9704 A/7 B 04.841.1750.0 25
9704 A/8 B 04.841.1850.0 25
9704 A/9 B 04.841.1950.0 25
9704 A/0 B 04.841.2050.0 25
9704 A/1-0 B 04.841.2150.0 25
9704 A/AG B 04.841.2250.0 25
9704 A/BG B 04.841.2350.0 25
9704 A/CG B 04.841.2450.0 25
9704 A/DG B 04.841.2550.0 25
9704 A/EG B 04.841.2650.0 25
9704 A/FG B 04.841.2750.0 25
9704 A/GG B 04.841.2850.0 25
9704 A/HG B 04.841.2950.0 25
9704 A/IG B 04.841.3050.0 25
9704 A/JG B 04.841.3150.0 25
9704 A/KG B 04.841.3250.0 25
9704 A/LG B 04.841.3350.0 25
9704 A/MG B 04.841.3450.0 25
9704 A/NG B 04.841.3550.0 25
9704 A/OG B 04.841.3650.0 25
9704 A/PG B 04.841.3750.0 25
9704 A/QG B 04.841.3850.0 25
9704 A/RG B 04.841.3950.0 25
9704 A/SG B 04.841.4050.0 25
9704 A/TG B 04.841.4150.0 25
9704 A/UG B 04.841.4250.0 25
9704 A/VG B 04.841.4350.0 25
9704 A/WG B 04.841.4450.0 25
9704 A/XG B 04.841.4550.0 25
9704 A/YG B 04.841.4650.0 25
9704 A/ZG B 04.841.4750.0 25
9704 A/AK B 04.841.4850.0 25
9704 A/BK B 04.841.4950.0 25
9704 A/CK B 04.841.5050.0 25
9704 A/DK B 04.841.5150.0 25
9704 A/EK B 04.841.5250.0 25
9704 A/FK B 04.841.5350.0 25
9704 A/GK B 04.841.5450.0 25
9704 A/HK B 04.841.5550.0 25
9704 A/IK B 04.841.5650.0 25
9704 A/JK B 04.841.5750.0 25
9704 A/KK B 04.841.5850.0 25
9704 A/LK B 04.841.5950.0 25
9704 A/MK B 04.841.6050.0 25
9704 A/NK B 04.841.6150.0 25
9704 A/OK B 04.841.6250.0 25
9704 A/PK B 04.841.6350.0 25
9704 A/QK B 04.841.6450.0 25
9704 A/RK B 04.841.6550.0 25
9704 A/SK B 04.841.6650.0 25
9704 A/TK B 04.841.6750.0 25
9704 A/UK B 04.841.6850.0 25
9704 A/VK B 04.841.6950.0 25
9704 A/WK B 04.841.7050.0 25
9704 A/XK B 04.841.7150.0 25
9704 A/YK B 04.841.7250.0 25
9704 A/ZK B 04.841.7350.0 25
9704 A/+ B 04.841.7450.0 25
9704 A/– B 04.841.7550.0 25
9704 A// B 04.841.7650.0 25
9704 A/. B 04.841.7750.0 25
111 to 000 04.841.9050.0 1
A to Z GB 04.841.9150.0 1
a to z KB 04.841.9250.0 1
Material: Polyamide 66/6 white,
marking on each branch Type Part No. Box Qty
unmarked
marked with the same number
marked with consecutive numbers
marked with identical uppercase letters
marked with identical lowercase letters
marked with the same symbol
1 set of identical numbers = 10 x 25 branches = 2500 digits
1 set of uppercase letters = 26 x 25 branches = 6500 letters
1 set of lowercase letters = 26 x 25 branches = 6500 letters
Marking branch
with 10 marker tags
