YAGEO CORPORATION ELECTROLYTIC CAPACITORS
CD [ For Ultra Low Impedance ]
Surface Mount
Aluminum Electrolytic
1
793
16E
0Capacitance (F)
Date Code
Rated Voltage (VDC)
MARKING
FEATURE
For Ultra Low Impedance Series with 105°C 2000 Hours
Suitable for AV (TV, Video, Audio), Monitor / Computer,
OA / HA / Communication, SMPS
( ) Reference Size
D
≥
ø8 = L
±
0.5
øD
±
0.5
L
±
0.3
A
±
0.2
0.3Max.
W
K
H
( P )
( I )( I )
SIZE Dø L A H I W P K
CODE
B 4.0 5.4 4.3 5.5 Max. 1.8 0.65 ± 0.1 1.0 ± 0.2 0.35
C 5.0 5.4 5.3 6.5 Max. 2.2 0.65 ± 0.1 1.5 ± 0.2 0.35
D 6.3 5.4 6.6 7.8 Max. 2.6 0.65 ± 0.1 1.8 ± 0.2 0.35
E 8.0 6.5 8.3 9.5 Max. 3.4 0.65 ± 0.1 2.2 ± 0.2 0.35
F 8.0 10.5 8.3 10.0 Max. 3.4 0.90 ± 0.2 3.1 ± 0.2 0.70 ± 0.20
G 10.0 10.5 10.3 12.0 Max. 3.5 0.90 ± 0.2 4.6 ± 0.2 0.70 ± 0.20
H 6.3 7.7 6.6 7.8 Max. 2.6 0.65 ± 0.1 1.8 ± 0.2 0.35
+ 0.15
--- 0.20
+ 0.15
--- 0.20
+ 0.15
--- 0.20
+ 0.15
--- 0.20
+ 0.15
--- 0.20
ELECTRICAL CHARACTERISTICS
Operation Temperature Range -40 to +105°C
Rated Voltage Range 6.3 to 35VDC
Rated Capacitance Range 4.7 ~ 1500µF
Capacitance Tolerance ±20% at 120Hz, 20°C
Leakage Current (Max. 20°C)
I ≤ 0.01CV (µA) or 3µA
(After 2 Minutes Application of DC Rated Voltage at 20°C)
I = Leakage Current (µA), C = Rated Capacitance (µF), V = Rated Voltage (V)
Dissipation Factor (tanδ) W V(V) 6.3 10 16 25 35
(120Hz, 20°C) tan δ0.26 0.19 0.16 0.14 0.12
Low Temperature Stability Impedance Ratio at 120Hz
W V (V) 6.3 10 16 25 35
Z (-25°C) / Z (+20°C) 2 2 2 2 2
Z (-40°C) / Z (+20°C) 3 3 3 3 3
Endurance
After the WV has been applied at 105°C for 2000 hours, the capacitors
shall meet following requirements.
(a) Capacitance Change: Within ±30% of the Initial Value
(b) Dissipation Factor: Not Exceeding 200% of Specied Value
(c) Leakage Current: Not Exceeding the Specied Value
Shelf Life
After having been placed at 105°C without voltage applied for 1000 hours,
the capacitors shall meet the same requirements as Endurance.
DIMENSIONS Unit: mm
141
CASE SIZE & PERMISSIBLE RIPPLE CURRENT OF STANDARD PRODUCTS D x L: mm
CAP. (μF) RATED VOLTAGE W V (SURGE VOLTAGE W V)
6.3 (8) 10 (13) 16 (20)
SIZE RIPPLE ESR SIZE RIPPLE ESR SIZE RIPPLE ESR
22 4 x 5.4 90 1.93 4 x 5.4 90 1.93 4 x 5.4 90 1.93
5 x 5.4 160 1.00
33 4 x 5.4 90 1.93 4 x 5.4 90 1.93 5 x 5.4 160 1.00
5 x 5.4 160 1.00
47 4 x 5.4 90 1.93 6.3 x 5.4 190 0.52 5 x 5.4 160 1.00
5 x 5.4 160 1.00 6.3 x 5.4 240 0.52
100 5 x 5.4 160 1.00 6.3 x 5.4 190 0.52 6.3 x 5.4 240 0.52
6.3 x 5.4 240 0.52
150 8 x 6.5 240 0.30 6.3 x 7.7 240 0.34 6.3 x 7.7 280 0.34
220 8 x 6.5 240 0.30 6.3 x 7.7 280 0.34 6.3 x 7.7 330 0.34
8 x 6.5 300 0.26 8 x 10.5 370 0.22
330 6.3 x 7.7 280 0.34 8 x 10.5 600 0.16 8 x 10.5 600 0.16
8 x 6.5 300 0.26
470 8 x 10.5 600 0.16 8 x 10.5 600 0.16 8 x 10.5 600 0.16
10 x 10.5 600 0.08
680 8 x 10.5 600 0.16 10 x 10.5 600 0.12 10 x 10.5 850 0.08
820 10 x 10.5 850 0.08
1000 10 x 10.5 600 0.16
1200 10 x 10.5 700 0.16
1500 10 x 10.5 850 0.08
Note: 1. Ripple Current: (mA/rms) 105°C, 100KHz
2. ESR: 100KHz / 20°C (Ω Max.)
142
CASE SIZE & PERMISSIBLE RIPPLE CURRENT OF STANDARD PRODUCTS D x L: mm
CAP. (μF) RATED VOLTAGE W V (SURGE VOLTAGE W V)
25 (32) 35 (44)
SIZE RIPPLE ESR SIZE RIPPLE ESR
4.7 4 x 5.4 90 1.93
10 4 x 5.4 90 1.93 4 x 5.4 90 1.93
5 x 5.4 160 1.00
22 5 x 5.4 160 1.00 5 x 5.4 160 1.00
33 5 x 5.4 160 1.00 6.3 x 5.4 240 0.52
6.3 x 5.4 240 0.52
47 6.3 x 5.4 240 0.52 6.3 x 5.4 240 0.52
68 6.3 x 5.4 240 0.52 6.3 x 7.7 280 0.34
100 6.3 x 7.7 280 0.34 6.3 x 7.7 280 0.34
8 x 6.5 300 0.26 8 x 10.5 600 0.16
10 x 10.5 850 0.08
150 8 x 10.5 600 0.16 8 x 10.5 600 0.16
220 8 x 10.5 600 0.16 10 x 10.5 600 0.16
330 10 x 10.5 600 0.16 10 x 10.5 850 0.08
470 10 x 10.5 850 0.08
Note: 1. Ripple Current: (mA/rms) 105°C, 100KHz
2. ESR: 100KHz / 20°C (Ω Max.)