Fused Fiber Technology Couplers, Splitters, Wavelength Division Multiplexers ADC has been manufacturing fused biconic tapered fiber optic couplers for over a decade. During this time, we have developed highly automated machines and sophisticated manufacturing processes to make us the world's leading supplier of couplers, splitters, and WDMs. ADC's technology, experience, and ongoing development, combined with an ISO 9001 certified manufacturing system, results in quality products second to none, with a capacity to meet the growing demands of the worldwide communications market. Today, ADC is one of the industry's most dynamic and innovative communications suppliers. Our couplers are used in a wide variety of telecommunication applications ranging from ultra long submarine networks to passive optical networks in metro applications. Fiber Optic Couplers Definitions Center Wavelength and Bandpass 1/02 * 1400 Fused Fiber Technology The performance of all couplers varies with wavelength. Coupler performance is usually specified over a wavelength window, or in some cases, multiple windows. The center wavelength is the nominal wavelength of operation of the coupler, while the bandpass is the range of wavelengths over which the specifications are guaranteed. In many cases, couplers will perform adequately over a range outside their bandpass, but adherence to specifications is not guaranteed in this region. Coupling Ratio Coupling ratio or splitting ratio is defined as the ratio of the optical power from one output port of the coupler to the sum of the total power from all output ports. The coupling ratio is measured at the specified center wavelength and is normally expressed as a percentage. Excess Loss Excess loss is the ratio of the optical power launched at the input port of the coupler to the total optical power measured from all output ports, expressed in dB. Typical excess loss is the expected value of the excess loss measured at the specified center wavelength. Insertion Loss Insertion loss is the ratio of the optical power launched at the input port of the coupler to the optical power from any single output port, expressed in dB. The insertion loss includes the coupler splitting loss and excess loss and is the most useful parameter for system design. The maximum and minimum insertion loss is the upper and lower limit, respectively, of the insertion loss of the coupler and applies over the entire wavelength range specified in the bandpass. The typical insertion loss is the expected value of the insertion loss measured at the specified center wavelength. Multimode couplers are measured with an equilibrium mode fill. Uniformity Uniformity is a measure of how evenly power is distributed between the output ports of the coupler. Uniformity applies to couplers with a nominally equal coupling ratio and is defined as the difference between the highest and lowest insertion loss between all of the coupler output ports, expressed in dB. Uniformity is a typical value across the entire bandpass. Directivity, Return Loss and Reflectance Directivity is the ratio of the optical power launched into an input port to the optical power returning to any other input port. Directivity has been referred to as near-end isolation or near-end crosstalk. Return loss is the ratio of optical power launched into an input port to the optical power returning to the same input port. Both directivity and return loss are expressed as positive dB and are measured with all output ports optically terminated. Reflectance is the negative of return loss. In many instances, reflectance and return loss are used synonymously. Minimum directivity and return loss are the lower limits which apply over the entire wavelength range specified in the bandpass. Wavelength Isolation Wavelength isolation is a measure of how well different wavelengths are separated at the output of a wavelength division demultiplexer. It is defined as the ratio of the optical power at the two output ports of the demultiplexer at a given wavelength, expressed in dB. The minimum wavelength isolation is the lower limit to the wavelength isolation measured over the entire wavelength range of the specified bandpass. Wavelength isolation has also been referred to as far-end crosstalk. w w w. a d c . c o m * + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 * 1 - 8 0 0 - 3 6 6 - 3 8 9 1 2 Fiber Optic Couplers ADC couplers and assemblies are periodically re-qualified to a variety of existing and developing standards to ensure their long-term reliability in field use. These tests include qualification to the principal coupler specifications used in the United States, the United Kingdom and Europe. The following series of standards are used as references for the development of test regimes: EIA/TIA 455, GR1209, GR1221, CECC 81000 and IEC 68. Qualification programs are regularly reviewed to ensure that the testing specifications of all customers are satisfied. Contact ADC to discuss your special test requirements. A summary of some standard tests is presented below. Type of Test Severity Reference Thermal Aging: 85C for 16 days EIA/TIA 455-4B, IEC 68-2-2 CECC 81000 Part 4.6.18 Humidity Resistance: 85C, 85% relative humidity for 21 days EIA/TIA 455-5A, IEC 62-2-3 CECC 81000 Part 4.6.19 Temperature Cycling: -40C to 85C, 42 cycles over 14 days EIA/TIA 455-3A, IEC 68-2-14 Change of Temperature (condensation): -40C to 75C, 85% relative humidity, 10 cycles over 10 days IEC 68-2-38 CECC 81000 Part 4.6.21 Water Immersion: 43C for 7 days EIA 455-12A, IEC 68-2-17 CECC 81000 Part 4.6.24 Vibration: 3 orthogonal axes at 1.52 mm double amplitude below crossover, 10g peak acceleration above, for 120 cycles of 10 Hz to 2000 Hz EIA 455-11A, IEC 68-2-6 CECC 81000 Part 4.6.1 Impact: 24 drops (3 orthogonal axes) from 1.8 meters onto a concrete surface EIA 455-2A Bump: 1000 bumps, peak acceleration of 245 m/s2, pulse duration of 6 ms IEC 68-2-29 CECC 81000 Part 4.6.8 Cable Retention: Tensile pull of 0.5 kg (unjacketed fiber) or 1 kg (jacketed fiber) EIA 455-6A CECC 81000 Part 4.6.4 Flex: 300 cycles with 0.5 kg load (jacketed fiber only) EIA 455-1A Twist: 10 cycles with 1.36 kg load (jacketed fiber only) EIA 455-36A 1/02 * 1400 Fused Fiber Technology Environmental and Mechanical Testing w w w. a d c . c o m * + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 * 1 - 8 0 0 - 3 6 6 - 3 8 9 1 3 Single Mode Fiber Optic Couplers Single Window (Wavelength Flattened) and Dual Window (Broadband) Couplers 1/02 * 1400 Fused Fiber Technology ADC's fused biconic taper coupler technology and advanced production techniques make for consistent high-performance couplers that are designed for the end users' specific applications. A variety of standard coupler packages, as well as pigtail options and connectorization are available, if required. Non-standard devices can be supplied upon request. All ADC couplers conform to stringent environmental and mechanical standards to give high reliability for a variety of field applications. Features * * * * * Completely passive Low loss Proven high reliability Qualified to major US and international performance specifications Low PDL Benefits * Independent of source wavelength and signal format * Minimize link loss; maximize number of nodes * Engineered for long-term field operation Applications * * * * * * Active monitoring EDFAs Passive Optical Network (PON) and Fiber Communication Systems CATV networks Fiber-in-the-loop Fiber optic test equipment and sensing Specifications 1x2 or 2x2 Couplers Configuration: 1x2 or 2x2 Wideband: 1260-1580 nm Wavelength Flattened: 1260-1360 or 1430-1580 nm Coupling Ratio Maximum Insertion Loss (dB) Primary/Secondary Maximum Insertion Loss (dB) Primary/Secondary 50/50 55/45 60/40 65/35 67/33 70/30 75/25 80/20 85/15 90/10 95/5 3.7/3.7 3.2/4.1 2.7/4.7 2.3/5.3 2.2/5.5 2.0/6.0 1.6/6.8 1.3/7.8 1.0/9.2 0.8/11.2 0.5/14.4 3.5/3.5 3.0/4.0 2.6/4.5 2.2/5.1 2.1/5.4 1.9/5.8 1.6/6.6 1.3/7.6 1.0/9.0 0.7/10.9 0.5/14.2 Operation Wavelength Return Loss/Directivity: >55 dB Operating Temperature: -40C to 85C Fiber: w w w. a d c . c o m Corning SMF-28TM * + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 * 1 - 8 0 0 - 3 6 6 - 3 8 9 1 4 Single Mode Fiber Optic Couplers Broadband Applications: 1x2 or 2x2 Couplers Catalog Number 10 A ___ ___ ___ ___ ___ ___ ___ ___ 1/02 * 1400 Fused Fiber Technology Component Type WB WF Connector Option1 Wideband Wavelength Flattened LEAVE BLANK AFC ASC ALX5 FCU SCU STU Configuration LEAVE BLANK Y 2x2 1x2 No connectors FC angled polish SC angled polish LX.5(R) angled polish2 FC ultra polish SC ultra polish ST(R) ultra polish Coupling Ratio 50 45 40 35 30 25 20 15 10 05 Pigtail Option 50/50 45/55 40/60 35/65 30/70 25/75 20/80 15/85 10/90 5/95 P L C 250 m acrylate coating3 250 m acrylate coating in 0.9 mm diameter loose tube buffer3 3 mm diameter reinforced cable4 Package Option5 S SR X 46 mm x 3.18 mm diameter tubular Small ruggedized 46 mm x 3.0 mm diameter tubular Center Wavelength 1315 1310 nm & 1550 nm (for WB) 1310 nm (for WF) 13 1550 nm (for WF) 15 Fiber Type 10 Corning SMF-28TM 1Available with loose tube buffer or cable pigtails only Connector return loss: Angled polish: 65 dB minimum LX.5 angled polish: 60.5 dB Ultra polish: 57 dB minimum 2The LX.5 connector is available only with 0.9 mm diameter loose tube buffer cable (pigtail option L). 3Package options S and X only 4Package option SR only 5See pages 23-24 for dimensions w w w. a d c . c o m * + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 * 1 - 8 0 0 - 3 6 6 - 3 8 9 1 5 Singlemode Fiber Optic Couplers High Performance Couplers for Demanding Applications 1/02 * 1400 Fused Fiber Technology ADC offers a series of splitters and tap couplers optimized for extremely high performance in telecommunication networks and in OEM applications such as EDFAs and Raman Amplifiers. Flattened wavelength response and low excess loss allow for superior performance in the C, S, or L bands or over different pump wavelengths. Features * Extremely low excess loss * C, S, and L band coverage * 980, 14xx, and 1480 coverage * Proven FBT reliability * All fiber construction - stable environmental performance Applications * EDFA * Raman amplifiers * Passive Optical Networks (PONs) Specifications 1x2 or 2x2 Couplers 1x2 or 2x2 Configuration: S, C, or L Bands (Transmission Band) or 980, 1480, or 14xx (Amplifier Band) Operation Wavelength: Coupling Ratio Primary Port Maximum IL (dB) 1/99 2/98 5/95 10/90 20/80 30/70 40/60 50/50 0.15 0.2 0.35 0.7 1.2 2.0 2.6 3.4 Typical Excess Loss: Minimum IL (dB) Secondary Port Maximum Maximum PDL (dB) IL (dB) 17.5 15.5 12.0 0.08 to 0.10 dB Fiber Type: Corning SMF-28TM or 980 Fiber Return Loss/Directivity: >55 dB Operating Temperature: -40C to 85C w w w. a d c . c o m 0.2 0.2 0.2 0.2 0.2 0.2 0.1 0.1 21.0 18.0 13.5 10.5 8.0 5.8 4.5 3.4 * + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 * 1 - 8 0 0 - 3 6 6 - 3 8 9 1 6 Single Mode Fiber Optic Couplers High Performance Couplers Catalog Number 1/02 * 1400 Fused Fiber Technology WF ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ Component Type WF Connector Option2 LEAVE BLANK Wavelength Flattened No connectors AFC FC angled polish ASC SC angled polish ALX5 LX.5(R) angled polish3 FCU FC ultra polish SCU SC ultra polish STU ST(R) ultra polish Configuration Y 1x2 LEAVE BLANK 2x2 Tap Ratio 01 02 05 10 20 30 40 50 Pigtail Option 99/1 98/2 95/5 90/10 80/20 70/30 60/40 50/50 P L C 250 m acrylate coated fiber, 1m long4 250 m acrylate coating in 0.9 mm diameter loose tube buffer4 3 mm diameter reinforced cable5 Package Option6 S 46 mm x 3.18 mm diameter tubular X 46 mm x 3.0 mm diameter tubular SR Small ruggedized Bandpass 09 970-990 nm1 14 1465-1495 nm C 1530-1580 nm L 1560-1610 nm CL 1530-1610 nm S 1480-1530 nm Fiber Type 09 Singlemode 980 nm fiber 10 Corning SMF-28TM For other configurations, packaging, and performance specifications, contact your nearest ADC sales office. 1Requires 980 fiber 2 Available with loose tube buffer pigtails or cable pigtails only Connector return loss Angled polish: 65 dB minimum LX.5 angled polish: 60.5 dB Ultra polish: 57 dB minimum 3 The LX.5 connector is available only with 0.9 mm diameter loose tube buffer cable (pigtail option L). 4 Package options S and X only 5Package option SR only 6See pages 23-24 for dimensions w w w. a d c . c o m * + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 * 1 - 8 0 0 - 3 6 6 - 3 8 9 1 7 Single Mode Fiber Optic Couplers Monolithic 1x4 Couplers Features * Compact packaging * Dual or single window operation * Completely passive operation * Proven high reliability * Low insertion loss Benefits * Operates in both 1310 nm and 1550 nm windows. Can be used with Fabry Perot, DFB and fiber optic amplifiers * 4 mm diameter x 55 mm long tubular package * Fully bidirectional and compatible with AM, FM and digital signals * Manufactured to Telcordia 1209 and 1221 guidelines using automated machines Specifications Wavelength Flattened 1260-1580 nm 1260-1360 or 1430-1580 nm Configuration: 1x4 1x4 1400 Wideband Maximum Insertion Loss (dB): 7.3 7.1 Typical Insertion Loss (dB): 6.2 * Fused Fiber Technology ADC's single mode monolithic 1x4 passive optical couplers are manufactured using ADC's proven fused biconic taper process, resulting in a very compact, highly reliable, cost competitive device that complies with Telcordia specifications for fiber optic branching components. The dual-window devices are ideal for use in video distribution networks and FITL networks operating in the 1310 nm and/or 1550 nm windows. Both wideband and wavelength flattened versions are available. Fiber: Operation Wavelength: 6.2 >55 dB Return Loss/Directivity: -40C to 85C Operating Temperature: 1/02 Corning SMF-28TM w w w. a d c . c o m * + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 * 1 - 8 0 0 - 3 6 6 - 3 8 9 1 8 Single Mode Fiber Optic Couplers Monolithic 1x4 Couplers Catalog Number 04 10 A Q Component Type WB WF Connector Option1 Wideband Wavelength Flattened LEAVE BLANK No connectors AFC FC angled polish ASC SC angled polish ALX5 LX.5(R) angled polish2 FCU FC ultra polish SCU SC ultra polish STU ST(R) ultra polish Configuration T Tree Ports 04 1x4 Pigtail Option Center Wavelength 1315 1310 nm & 1550 nm (for WB) 1310 nm (for WF) 13 1550 nm (for WF) 15 P L 250 m acrylate coating 250 m acrylate coating in 0.9 mm diameter loose tube buffer Package Option3 Fiber Type 10 Corning SMF-28TM Q 55 mm x 4 mm diameter tubular 1Available with loose tube buffer pigtails only Connector return loss: Angled polish: 65 dB minimum LX.5 angled polish: 60.5 dB Ultra polish: 57 dB minimum 2The LX.5 connector is available only with 0.9 mm diameter loose tube buffer cable (pigtail option L). 3See page 24 for dimensions 1/02 * 1400 Fused Fiber Technology T w w w. a d c . c o m * + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 * 1 - 8 0 0 - 3 6 6 - 3 8 9 1 9 Single Mode Fiber Optic Couplers ADC's family of 1xN optical splitters are prestructured trees, manufactured from ADC's high performance FBT couplers. They are designed for very low insertion loss and extremely high uniformity, making these devices ideal for use as splitters in Passive Optical Networks (PONs) in Fiber to the Home (FTTH) and Fiber to the Curb (FTTC) architectures. Manufactured to Telcordia 1209 and 1221 guidelines these bidirectional devices are compatible with AM, FM and digital signals. Wavelength Flattened Wideband Center Wavelength: Bandpass: 1/02 * 1400 Fused Fiber Technology Passive 1xN and 2xN Optical Splitters 1310 and 1550 nm 1310 or 1550 nm 1260-1360 and 1430-1580 nm 1260-1360 or 1430-1580 nm Configuration Maximum Insertion Loss (dB) Typical Insertion Loss (dB) Maximum Insertion Loss (dB) Typical Insertion Loss (dB) 1x3 1x4 or 2x4 1x5 1x6 or 2x6 1x7 1x8 or 2x8 1x9 1x10 or 2x10 1x11 1x12 or 2x12 1x13 1x14 or 2x14 1x15 1x16 or 2x16 1x17 1x18 or 2x18 1x19 1x20 or 2x20 1x21 1x22 or 2x22 1x23 1x24 or 2x24 1x25 1x26 or 2x26 1x27 1x28 or 2x28 1x29 1x30 or 2x30 1x31 1x32 or 2x32 6.0 7.5 8.6 9.5 10.3 11.0 11.6 12.1 12.6 13.0 13.5 13.8 14.2 14.5 14.8 15.1 15.4 15.6 15.9 16.1 16.3 16.5 16.8 17.0 17.1 17.3 17.5 17.7 17.8 18.0 4.9 6.2 7.2 8.0 8.7 9.3 9.9 10.3 10.8 11.2 11.5 11.8 12.2 12.4 12.7 13.0 13.2 13.4 13.7 13.9 14.1 14.3 14.4 14.6 14.8 15.0 15.1 15.3 15.4 15.6 5.7 7.1 8.4 9.2 10.0 10.6 11.4 11.9 12.5 12.8 13.3 13.5 14.0 14.1 14.6 15.0 15.2 15.5 15.6 15.9 16.2 16.3 16.5 16.7 17.0 17.3 17.2 17.5 17.6 17.7 4.9 6.2 7.2 8.0 8.7 9.3 9.9 10.3 10.8 11.2 11.5 11.8 12.2 12.4 12.7 13.0 13.2 13.4 13.7 13.9 14.1 14.3 14.4 14.6 14.8 15.0 15.1 15.3 15.4 15.6 >55 dB Return Loss/Directivity: -40C to 85C Operating Temperature: Corning SMF-28TM Fiber: w w w. a d c . c o m * + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 * 1 - 8 0 0 - 3 6 6 - 3 8 9 1 10 Single Mode Fiber Optic Couplers 1xN and 2xN Splitters Catalog Number Component Type WB WF Connector Option1 Wideband Wavelength Flattened LEAVE BLANK No connectors AFC FC angled polish ASC SC angled polish ALX5 LX.5(R) angled polish2 FCU FC ultra polish SCU SC ultra polish STU ST(R) ultra polish Configuration Tree (1xN) T 2T Tree (2xN)* Output Ports 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Pigtail Option L C P 250 m acrylate coating in 0.9 mm diameter loose tube buffer 3 mm diameter reinforced cable3 250 m acrylate coating Package Option4 FN FO FO-2 fiber organizer FO-1 fiber organizer Fiber Type 10 Corning SMF-28TM 1Available 1400 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 Center Wavelength * Fused Fiber Technology 10 A ___ ___ ___ ___ ___ ___ ___ ___ *Only available with even numbered output ports 1315 1310 nm & 1550 nm (for WB) 1310 nm (for WF) 13 1550 nm (for WF) 15 1/02 Note: Non equal splits available on request with loose tube buffer or cable pigtails only Connector return loss Angled polish: 65 dB minimum LX.5 angled polish: 60.5 dB Ultra polish: 57 dB minimum 2The LX.5 connector is available only with 0.9 mm diameter loose tube buffer cable (pigtail option L). 3Only available for devices up to 1x8 or 2x8 4See page 25 for dimensions w w w. a d c . c o m * + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 * 1 - 8 0 0 - 3 6 6 - 3 8 9 1 11 Single Mode Fiber Optic Attenuators ADC offers a range of dual window and single window attenuators for applications requiring load management in low to medium power applications. Features * C and L band coverage 1400 Fused Fiber Technology * Dual window options * Proven FBT reliability * All fiber construction - stable environmental performance Applications * Passive Optical Networks (PONs) * DWDM systems Specifications Operation Wavelength: Minimum Maximum Minimum Attenuation (dB) Attenuation (dB) Attenuation (dB) Attenuation 1 dB 2 dB 3 dB 4 dB 5 dB 7 dB 8 dB 10 dB 12 dB 15 dB 0.7 1.6 2.5 3.4 4.4 6.4 7.3 9.0 11.0 13.5 1.3 2.4 3.5 4.6 5.6 7.6 8.7 11.0 13.0 16.5 Return Loss: 0.8 1.7 2.6 3.5 4.5 6.5 7.4 9.2 11.2 14.0 Maximum Attenuation (dB) 1.2 2.3 3.4 4.5 5.5 7.5 8.6 10.8 12.8 16.0 >55 dB Fiber: Corning SMF-28TM Operating Temperature: -40C to 85C 1/02 * Wavelength Flattened: C and/or L Band Wideband: 1260-1580 nm w w w. a d c . c o m * + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 * 1 - 8 0 0 - 3 6 6 - 3 8 9 1 12 Single Mode Fiber Optic Attenuators Catalog Number ___ A ___ ___ ___ ___ ___ ___ 1/02 * 1400 Fused Fiber Technology Component Type Connector Option1 LEAVE BLANK WB Wideband WF Wavelength Flattened AFC ASC ALX5 FCU SCU STU Attenuation 01 02 03 04 05 07 08 10 12 15 1 dB 2 dB 3 dB 4 dB 5 dB 7 dB 8 dB 10 dB 12 dB 15 dB No connectors FC angled polish SC angled polish LX.5(R) angled polish2 FC ultra polish SC ultra polish ST(R) ultra polish Pigtail Option P L C Bandpass 1315 1310 nm and 1550 nm (for WB) C 1520-1580 nm L 1560-1610 nm CL 1520-1610 nm 250 m acrylate coated fiber, 1m long3 250 m acrylate coating in 0.9 mm diameter loose tube buffer3 3 mm diameter reinforced cable4 Package Option5 S 46 mm x 3.18 mm diameter tubular X 46 mm x 3.0 mm diameter tubular SR Small ruggedized Fiber Type 10 Corning SMF-28TM For other configurations, packaging, and performance specifications, contact your nearest ADC sales office. 1Available with loose tube buffer or cable pigtails only Connector return loss Angled polish: 65 dB minimum LX.5 angled polish: 60.5 dB Ultra polish: 57 dB minimum 2The LX.5 connector is available only with 0.9 mm diameter loose tube buffer cable (pigtail option L). 3 Package options S and X only 4Package option SR only 5See pages 23-24 for dimensions w w w. a d c . c o m * + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 * 1 - 8 0 0 - 3 6 6 - 3 8 9 1 13 Single Mode Wavelength Division Multiplexers Broadband Wavelength Division Multiplexers Fused Fiber Technology ADC's 1310/1550nm WDM offers superior optical performance in combining or dividing 1310 nm and 1550 nm optical signals. Low insertion loss, low PDL, high isolation, and high directivity are achieved by utilizing ADC's advanced fused biconic taper technology and state-of-the-art manufacturing process. For demanding demultiplexing applications, higher isolation versions are available. Features * All fiber construction - high reliability performance * Suited to standard 1310 nm and 1550 nm sources * Low insertion loss for multiplexing * High and very high isolation for demultiplexing * High directivity - low crosstalk * Designed for various user applications -variety of package and pigtail options -factory connectorization is available * Design, development and production are ISO 9001 certified Applications * Multiplexing/demultiplexing * Double system capacity over a single fiber * Bidirectional communication over a single fiber * CATV * Fiber optic test equipment Specifications Configuration: 1400 High Isolation Demultiplexer Very High Isolation Demultiplexer Maximum Insertion Loss: 0.3 dB 0.7 dB 1.0 dB Minimum Wavelength Isolation: 15 dB 30 dB 45 dB Typical Isolation for 10 nm Bandpass: 20 dB 40 dB 60 dB 1/02 Multiplexer/ Demultiplexer * 1x2 Center Wavelength: 1310 & 1550 nm Bandpass: 1290-1330 nm & 1530-1570 nm Return Loss/Directivity: Operating Temperature: Fiber: w w w. a d c . c o m >55 dB -40C to 85C Corning SMF-28TM * + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 * 1 - 8 0 0 - 3 6 6 - 3 8 9 1 14 Single Mode Wavelength Division Multiplexers Broadband Wavelength Division Multiplexers Catalog Number Y 1315 10 A ___ ___ ___ ___ ___ ___ ___ Connector Option2 LEAVE BLANK Standard mux/demux WM WMH High isolation1 WMHH Very high isolation1 AFC ASC ALX5 FCU SCU STU Configuration Y 1x2 No connectors FC angled polish SC angled polish LX.5(R) angled polish3 FC ultra polish SC ultra polish ST(R) ultra polish Center Wavelength Pigtail Option 1315 1310 nm & 1550 nm 250 m acrylate coating4 250 m acrylate coating in 0.9 mm diameter loose tube buffer4 3 mm diameter reinforced cable5 P L Fiber Type 10 Corning SMF-28TM C 1Package options fiber organizers only with loose tube buffer or cable pigtails only Connector return loss: Angled polish: 65 dB minimum LX.5 angled polish: 60.5 dB Ultra polish: 57 dB minimum 3The LX.5 connector is available only with 0.9 mm diameter loose tube buffer cable (pigtail option L). 4Not available in SR package 5Package options SR and fiber organizers only 6See pages 23-25 for dimensions Package Option6 2Available S X SR FN FO 46 mm x 3.18 mm diameter tubular 46 mm x 3.0 mm diameter tubular Small ruggedized FO-2 fiber organizer FO-1 fiber organizer 1/02 * 1400 Fused Fiber Technology Component Type w w w. a d c . c o m * + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 * 1 - 8 0 0 - 3 6 6 - 3 8 9 1 15 Pump WDMs for EDFAs Fiber Amplifier Pump Wavelength Division Multiplexers ADC offers its 980/1550 and 1480/1550 WDMs for EDFA pumping. These devices use ADC's proven fused biconic taper (FBT) technology and advanced production techniques to give high performance and long term stability. The pump WDMs are available in a small tubular package suited for OEM applications. * Low insertion loss and high pump coupling efficiency * All fiber construction - stable environmental performance * Proven FBT performance Pump Laser Pump Isolator Common Signal WDM Erbium Doped Fiber Specifications 980/1550 1480/1550 Wavelength Insertion Loss Wavelength Insertion Loss Pump to Common: 970-990 nm <0.3 dB 1475-1485 nm <0.4 dB Signal to Common: 1535-1565 nm <0.3 dB 1545-1555 nm <0.4 dB Common to Signal: 970-990 nm >20 dB 1475-1485 nm >14 dB <0.1 dB PDL: Minimum Directivity/ Return Loss: >55 dB -40C to 85C Operating Temperature: 1/02 * 1400 Fused Fiber Technology Features w w w. a d c . c o m * + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 * 1 - 8 0 0 - 3 6 6 - 3 8 9 1 16 Pump WDMs for EDFAs Fiber Amplifier Pump Wavelength Division Multiplexers Catalog Number Component Type WMY Pigtail Option 1x2 Mux/Demux P L Center Wavelength 0915 1415 V 980/1550 nm1 1480/1550 nm 250 m acrylate coated fiber, 1 m long 250 m acrylate coating in 0.9 mm diameter loose tube buffer Package Option2 For other configurations, packaging and performance specifications, contact your nearest ADC sales office. V 55 mm x 3.0 mm diameter tubular Fiber 09 Single mode 980 fiber 10 Corning SMF-28TM 1 Requires 980 fiber page 23 for dimensions 2See 1/02 * 1400 Fused Fiber Technology WMY w w w. a d c . c o m * + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 * 1 - 8 0 0 - 3 6 6 - 3 8 9 1 17 Multimode Fiber Optic Couplers 1x2 and 2x2 Multimode Couplers Features * All fiber construction - stable environmental performance * Broadband operation - 400 nm to 1600 nm * Different fiber sizes - 50/125 and 62.5/125 * Designed for a variety of user applications -variety of standard packaging and pigtail options available -factory connectorization is available * Design, development and production are ISO 9001 certified Applications * Local area networks (LAN) * Fiber optic test equipment * Fiber communications systems * Fiber optic sensing Specifications Configuration: 1x2 or 2x2 Bandpass: 400-1600 nm Maximum Insertion Loss: 4.0 dB Return Loss/Directivity: >45 dB Operating Temperature: -40C to 85C Fiber: 50/125m or 62.5/125m Note: Multimode couplers are measured with an equilibrium mode fill. 1/02 * 1400 Fused Fiber Technology ADC's fused biconic taper coupler technology and advanced production techniques enable consistent high-performance couplers. ADC's multimode couplers offer superior optical performance in combining or dividing optical signals in broadband 400 nm to 1600 nm operations. These components are suitable for applications in LAN, test equipment, and optical systems. All ADC couplers conform to stringent environmental and mechanical standards to give high reliability for field applications. w w w. a d c . c o m * + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 * 1 - 8 0 0 - 3 6 6 - 3 8 9 1 18 Multimode Fiber Optic Couplers 1x2 and 2x2 Multimode Couplers Catalog Number M ___ ___ 50 ___ 08 ___ ___ M Connector Option1 Multimode LEAVE BLANK FC SC ST MLX5 Configuration LEAVE BLANK Y 2x2 1x2 No connectors Standard polish FC/PC Standard polish SC/PC Standard polish ST/PC Standard polish LX.5(R)2 Coupling Ratio 50 Pigtail Option 50% P L Center Wavelength 08 850 nm C Fiber Size 50 62 250 m acrylate coating3 250 m acrylate coating in 0.9 mm diameter loose tube buffer3 3 mm diameter reinforced cable4 Package Option5 50/125 m 62/125 m S SR X 46 mm x 3.18 mm diameter tubular Small ruggedized 46 mm x 3 mm diameter tubular 1Available with loose tube buffer or cable pigtails only LX.5 connector is available only with 0.9 mm diameter loose tube buffer cable (pigtail option L). 3Package options S and X only 4Package option SR only 5See pages 23-24 for dimensions 2The 1/02 * 1400 Fused Fiber Technology Component Type ___ ___ ___ w w w. a d c . c o m * + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 * 1 - 8 0 0 - 3 6 6 - 3 8 9 1 19 Package Options FO-1 Fiber Organizer ADC's Fiber Organizer is a multi-purpose module which provides a protected environment for secure storage of couplers, splices and excess fiber without violating minimum fiber bend radius specifications. Fused Fiber Technology The organizer has breakouts for fiber entry and is available with component clips to hold couplers and splices. The organizers are stackable and designed to be compatible in size with a standard Eurocard. Features * Meets fiber bend radius specifications * Entry/exit breakouts for buffer or cable * Press fit fiber component clips * Eurocard size compatible * Strong ABS construction * Modular design allows stacking * Design, development and production ISO 9001 certified Applications * Protected storage for: -fiber -couplers -mechanical splices -fusion splice protectors * Fiber breakouts * Fiber networks 44 mm (1.73") 38.9 mm (1.53") POSITION 1 95 mm (3.74") 1/02 * 1400 144 mm (5.67") Clip 3 POSITION 2 44 mm (1.73") Fiber Organizer FO-1 shown with cover removed 38.9 mm (1.53") Clip 4 Fiber Component Retainer Clips w w w. a d c . c o m * + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 * 1 - 8 0 0 - 3 6 6 - 3 8 9 1 20 Package Options FO-1 Fiber Organizer Catalog Number FO 1 ___ ___ ___ 1400 Fused Fiber Technology Clip Position 1 4 3 0 B ___ Color Clip type 4 for securing items with 4 mm (nominal) diameter and 35 mm minimum length. Accommodates 4 items Clip type 3 for securing items with 3 mm (nominal) diameter and 35 mm minimum length. Accommodates 5 items No clip Black B Cover Includes cover and cover screw No cover. Screws provided for pairing organizer 1 0 Clip Position 2 4 3 0 Clip type 4 for securing items with 4 mm (nominal) diameter and 35 mm minimum length. Accommodates 4 items Clip type 3 for securing items with 3 mm (nominal) diameter and 35 mm minimum length. Accommodates 5 items No clip Each organizer module can contain two clips of the same or different type for securing components. Organizers are supplied with clips mounted in the positions indicated on the previous page. Fiber Component Retainer Clip Catalog Number ___ B ___ ___ 1/02 * FC Clip Type 4 3 Color Clip type 4 Clip type 3 B Black Tape T LEAVE BLANK Double back tape No double back tape Fiber Organizer (Empty) Ordering Information Description Catalog Number Fiber Organizer w w w. a d c . c o m FO-1 * + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 * 1 - 8 0 0 - 3 6 6 - 3 8 9 1 21 Package Options * 1400 The ADC Fiber Organizer Package type FO-2 provides storage for couplers, splices and excess fiber without violating minimum fiber bend radius specifications. Eight breakouts are located on each end for cable ingress/egress. The cover breakouts align with the cable ingress/egress channels on the base structure. Tabs, located around the periphery of the base structure, help retain stored fiber. All mounting or accessory holes are sealed and the cover/base assembly can be sealed to prevent moisture or contaminants from entering. The FO-2 is designed to fit a wide range of existing closures and splice tray hardware with a range of mounting options. 155 mm (6.10") 92 mm (3.62") PPEmPS Fused Fiber Technology FO-2 Fiber Organizer Fiber Organizer FO-2 shown with cover removed Specifications Dimensions: 6.1" x 3.6" x 0.37" (155 x 92 x 9.5 mm) Color: Black Flammability: The FO-2 is UL 94V-0 rated and will not support combustion Operating Temperature: -40C to 85C Ordering Information Catalog Number 1/02 Description FO-2 Fiber Organizer w w w. a d c . c o m * + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 * 1 - 8 0 0 - 3 6 6 - 3 8 9 1 22 Package Options Diagrams 3.18 mm (0.12") 46 mm (1.77") WBY50131510 coupler 00319841 Pigtails:1.0 m minimum 250m acrylate coating Stainless steel 1x2 Tubular Package - S Configuration Bare Fiber Pigtail 3.0 mm (0.11") 55 mm (2.16") WMY141510 Molded strain relief coupler 00319845 Pigtails: 1.0 m minimum 250m acrylate coating Stainless steel 1x2 Tubular Package - V Configuration Bare Fiber Pigtail 3.0 mm (0.11") 46 mm (1.77") WBY50131510 Molded strain relief coupler 00319841 Pigtails:1.0 m minimum 250m acrylate coating Stainless steel 1x2 Tubular Package - X Configuration Bare Fiber Pigtail * 1400 Fused Fiber Technology Molded strain relief 3.18 mm (0.12") 1/02 46 mm (1.77") WBY50131510 Stainless steel coupler 00319843 Pigtails: 1.0 m minimum 0.9 mm diameter Loose tube buffer 1x2 Tubular Package - S Configuration 900 Micron Jacketed Pigtails - Also available in V and X configurations w w w. a d c . c o m * + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 * 1 - 8 0 0 - 3 6 6 - 3 8 9 1 23 Package Options Diagrams 3.97 mm (0.15") 55 mm (2.16") WBT04131510 00339479 Pigtails: 1.0 m minimum 250m acrylate coating Stainless Steel 1x4 Tubular Package - Q Configuration Bare Fiber Pigtail 3.97 mm (0.15") 55 mm (2.16") WBT04131510 00339479 Stainless steel Pigtails: 1.0 m minimum 0.9 mm diameter Loose tube buffer 1x4 Tubular Package - Q Configuration 900 Micron Jacketed Pigtail 6 mm (0.23") 75 mm (2.95") 15 mm (0.575") WBY50131510 00313964 Pigtails: 1.0 m minimum 3 mm diameter reinforced cable 1x2 Ruggedized Package - SR Configuration 1/02 * 1400 Fused Fiber Technology Molded strain relief w w w. a d c . c o m * + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 * 1 - 8 0 0 - 3 6 6 - 3 8 9 1 24 Package Options Diagrams 9.5 mm (0.37") 155 mm (6.10") WBT04131510 Fused Fiber Technology 92 mm (3.62") Pigtails: 1.0 m minimum 0.9 mm diameter Loose tube buffer FO-2 Fiber Organizer Package - FNL 10 mm (0.39") 144 mm (5.67") 95 mm (3.74") WBT08131510 Pigtails: 1.0 m minimum 0.9 mm diameter Loose tube buffer 1/02 * 1400 FO-1 Fiber Organizer Package - FOL w w w. a d c . c o m * + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 * 1 - 8 0 0 - 3 6 6 - 3 8 9 1 25 Web Site: www.adc.com From North America, Call Toll Free: 1-800-366-3891, Ext. 73475 * Outside of North America: +1-952-938-8080 Fax: +1-952-917-3292 For a complete listing of ADC's global sales office locations, please refer to our web site. ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. 1400 1/02 Revision (c) 2002, 2000, 1999, 1997, 1995, 1991 ADC Telecommunications, Inc. All Rights Reserved An Equal Opportunity Employer