TECHNICAL
SPECIFICATION
Technical Service Department,
JSP Ltd., Worsham Mill, Minster
Lovell, Oxford, OX29 0TA
Tel.: 01993 824000
Fax: 01993 824422
Manufacturing For Safety
113 MOULDED DISPOSABLE DUST MASK
Conformity: Meets the FFP1 requirements of EN 149.
EC Type Examination Certificate Number 73057, issued by BSi
Product Certification, in accordance with the PPE Directive
89/686/EEC.
Performance: Offers an assigned protection factor (APF) of 4 x Occupational
Exposure Standard (OES) for fine non-toxic dusts, fibres, fumes and
mists.
Materials: Man made fibres
Polystyrene exhalation valve with rubber diaphragm
Instructions For Use: Mask must be fitted in accordance with the instructions supplied. Care
must be taken to ensure that the correct mask type is selected for the
work to be carried out. If in doubt as to the type of mask required seek
professional advice.
Cleaning &
Maintenance:
Not applicable - disposable product.
Store the masks out of direct sunlight away from chemicals and in a dry
atmosphere.
Limitations Of Use: The mask, when in contact with the skin may cause allergic reactions
to susceptible individuals. If this occurs leave the hazard area, remove
mask and seek medical advice. Protection will only be offered if the
mask is fitted correctly. The mask is not designed to be worn by
people with facial hair.
Page 1 of 1
THE INFORMATION IN THIS DOCUMENT IS CORRECT AS OF PRINT DATE
14/Mar/2003
