Amphenol
Amphenol Industrial Products Group introduces a connection
system family with 1.5 mm socket contacts featuring
Amphenol’s exclusive RADSOK® contact system. The new
Tru-Loc connector series is designed to perform in demanding
environments, such as under valve covers on diesel engines
and in high vibration sensor applications.
Tru-Loc features a molded thermoplastic main plug body with
secondary latch and a fluoroelastomer main joint seal that is
resistant to many fluids, including diesel fuel.
The Tru-Loc series includes 2-way, 4-way, and 6-way inline
plugs and receptacles. Our engineering team can also design
this series to mate to a device, sensor, fuel injector, splitter,
pass through connector, and more. Special backshells can
be designed for the 6-way series, and we can meet 150°C
temperatures upon request. These connection systems are
RoHS compliant and seal to IP67 when mated. They are
rated for high vibrations at 32 Grms.
Amphenol®Tru-Loc®Rugged Environment
Connector featuring RADSOK®Contacts
www.amphenol-industrial.com
Features:
· 2, 4, or 6 pin connector with 1.5mm RADSOK®
featured contacts
· Plug body with secondary latch
· Fluoroelastomer main joint seal and silicone rubber wire
seals to support IP67 rating
· Dielectric withstanding voltage is 1600 Vac RMS
· 13 Amp current rating
· Insulation resistance can meet 100 M Ohms
· Mating force less then 70N
· Contact retention between 60~80N
· Operating temperature can meet -40°C to +125°C or
+ 150°C (depending on PN); 100 cycles, 1 hour per cycle
· Durability is 20 mating cycles
IDS-16-4
®
Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented
without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not
recommendations to infringe any patent. The user should assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors.
* Socket Contacts are on reels of 4,200 pieces and pin contacts are on reels of 4000 pieces
* For Crimp Information please contact factory
* Cable seals are sold separately and must be used in all
cavities and on both sides of the connection system
For additional information on the Amphe-Power family of connectors with RADSOK®
Technology, please ask for our RADSOK® Catalog (SL-391) or download it from the Catalogs
section of our website.
Material Specification
Plug with RADSOK®Socket Contacts
Plug Body Nylon
Wire Seal Silicone
Main Joint Seal Fluoroelastomer
Socket Contact Copper Alloy w/ Stainless Steel Hood
Receptacle with Pin Contacts
Receptacle Body Nylon
Pin Contact Copper Alloy
Electrical Specifications
Dielectric Withstanding Voltage (Test Voltage) 1600 Vac RMS
Current Rating 13 amp (DC) (16 AWG Cable)
Insulation Resistance 100 M Ohms
AIPG Part Number Description Additional Information
10-838275-000 2way Plug (Plug Body, Locking Collar, and Main Joint Seal) 125°C
10-838275-002 2way Plug (Plug Body, Locking Collar, and Main Joint Seal) 150°C
10-707003-002 4way Plug (Plug Body, Locking Collar, and Main Joint Seal) 150°C
10-707508-02X(X: A,B,C,D) 6way Plug (Plug Body, Locking Collar, and Main Joint Seal) 4 indexes available, 150°C
10-707516-001 2way receptacle 150°C
10-707517-001 4way receptacle 150°C
10-707509-00X(X: A,B,C,D) 6way receptacle 4 indexes available, 150°C
10-838137-00D Wire seal (silicone) To be used with insulated wires
with insulation between 1.8-2.5 mm
10-838137-01D Wire seal (silicone) To be used with insulated wires
with insulation between 1.2-1.8 mm
10-730605-002 Stamped and formed female socket, Au+PdNi plating Crimps to wire from 0.8-1.3 sq. mm
10-707515-002 Stamped and formed male pin, Au+ PdNi plating Crimps to wire from 0.8-1.3 sq. mm
10-707515-0M2 Machined male pin, Au+PaNi plating Crimps to wire from 0.8-1.3 sq. mm
10-730179-002 Stamped and formed female socket, Au+PdNi plating Crimps to wire from 0.5-0.8 sq. mm
10-730764-002 Stamped and formed male pin, Au+ PdNi plating Crimps to wire from 0.5-0.8 sq. mm
C10-708354-000 Size 20 AWG hand crimp tool
C10-730690-000 Size 16-18 AWG hand crimp tool
Mechanical Specifications
Connector Mating Force <70 N (15.7 lb)
Contact Retention Primary Only: 80 N (18.0 lb)
Secondary Only: 60 N (13.5 lb)
Vibration 32 g RMS
Operating Temperature Range -40°/+125°C or +150°C depending on PN;
100 cycles, 1 hour per cycle
Ingress Protection IP67
Durability (Mating Cycle) 20 cycles
®
For further information on your individual application requirements, contact: Amphenol Corporation
North America:
Amphenol Industrial Operations
180 N. Freeport Drive, Plant 4
Nogales, AZ 85621
Tel: (520) 285-5130
Fax: (520) 285-5134
Email: rpedrazzini@amphenol-aio.com
Europe:
Amphenol Industrial Operations Europe
Via Barbaiana 5
1-20020 Lainate (MI) Italy
Tel: +39 02 93254.204
Fax: +39 02 93254.444
Email: info@amphenol-aio.com
Middle East:
Amphenol Middle East Enterprises FZE
Office C-37 PO Box 21107
Ajman Free Zone, UAE
Tel: +9 716-7422494
Fax: +9 716-7422941
Email: jhussain@amphenol-industrial.com
Asia:
Amphenol Technology Shenzhen Ltd
Block 5 Fuan 2nd Industrial Park
Dayang Rd, Fuyong Baoan
Baoan, Shenzhen, China 518103
Tel; +86 755 2881 8389
Fax; +86 755 2991 8310
Email: enquiry@amphenol-aio.com
