Consumer Aftermarket
Product Catalog
Fuse Holders and Taps
* For use with regular ATC fuses. For details on the
easy
ID™ line of illuminating ATC blade fuses, see page 9.
For product information and data sheets, visit www.cooperbussmann.com 17
Consumer Aftermarket Catalog
HHS
Fuse Holders & Taps
Blister Tri-Lingual Maximum
Part No. Pack Blister Volts/Amps Leadwire Description
HHL X 32V/20A #16 Holder with cover
HHL-B 32V/20A #16 Body only
HHM X X 32V/30A #12 Holder with cover
HHM-B 32V/30A #12 Body only
HHM-C — Cover for HHM holder
HHU X 32V/30A #12 Water-resistant holder
ATM-FHID* X 32V/20A #16 Illuminating holder
In-Line Fuse Holders for ATM Fuses
Blister Tri-Lingual Maximum
Part No. Pack Blister Volts/Amps Leadwire Description
HHC X X 32V/20A #16 Yellow water-resistant holder
HHD X X 32V/30A #12 Heavy-duty fuse holder
HHD-30 X 32V/30A #12 Holder with ATC-30A fuse
HHD-C — Cover for HHC or HHD fuse folder
HHF X 32V/20A #16 Holder with protective cover
HHG X X 32V/30A #12 Heavy-duty holder with cover
HHR X 32V/30A #12 Heavy-duty water-resistant holder
HHS X 32V/20A #18 to #14 Self-stripping fuse holder
ATC-FHID* X 32V/20A #16 Illuminating holder
In-Line Fuse Holders for ATC Fuses
Cooper Bussmann offers a complete line of fuse holders to install either
blade-type or glass tube fuses. Choose water resistant and/or splash-proof
versions for extra protection in special applications. Four types of connectors
are available to meet the needs of technicians and do-it-yourselfers:
• Wire Loop. To install, simply cut the wire, strip ends and attach each end
to the circuit. Requires the use of additional connectors.
• Crimp-On. Strip wire and insert into fuse holder. Crimp the connections
tightly, and you're done. No additional hardware needed.
• Self-Stripping. Easy to install — simply locate fuse holder at a convenient
spot along the wire. Snap fuse holder closed around wire to pierce
insulation automatically.
• Quick-Connect. Attach fully insulated female push-on terminal onto the
1/4” quick-connect terminals.
When selecting a fuse holder, always match the device to the wire being
fused. Using an undersized fuse holder will increase electrical resistance in
the circuit and reduce performance. NOTE: Never install a fuse with a larger
amp rating than specified for the holder.
HHL
HHDHHC
HHFHHD-C
HHG
HHX
HHR
HHM-B
HHM-C
HHU
ATM-FHID
ATC-FHID
In-Line Fuse Holders for Maxi Fuses
Part No. Volts/Amps Leadwire Description
HHX 32V/20-60A #6 Fuse holder with cover
HHX-B 32V/20-60A #6 Body only
HHX-C — Cover only
Blade-Type Fuse Holders
* For use with regular ATM fuses. For details on the
easy
ID™ line of illuminating ATM blade fuses,
see page 9.
For product information and data sheets, visit www.cooperbussmann.com
18
Consumer Aftermarket Catalog
Fuse Holders & Taps
Panel-Mount Holders For 1/4" x 11/4" Fuses
Blister Tri- Ratings Leads/ Description
Part No. Pack Lingual Fuse/Size Volts/Amps Terminals Feature
HFA 1/4”x 1
1/4” 250V/20A Crimp #12 to 16 wire Water-resistant holder
HFB X X 1/4”x 1
1/4” 32V/30A Crimp #12 to 18 wire Water-resistant holder, yellow
HHB X X 1/4”x
7/8” to 11/4” 32V/30A Crimp #12 to 18 wire Universal holder, yellow
HHK X X 1/4”x
5/8” to 11/4” & SFE-20 32V/20A #14 leadwire Universal nylon, twist lock, no fuse
HHN X 1/4”x 1
1/4” 32V/30A #12 leadwire Nylon heavy-duty holder with AGC-30 fuse
HMJ X X For SFE-20 (included) 32V/20A 8" of #14 leadwire With fuse and wire loop leads
HMK X X 1/4”x 1
1/4” & SFE-20 32V/30A #12 leadwire No fuse, wire loop leads
HRH For SFE-9 (included) 32V/9A 19" of #14 leadwire With fuse and wire loop leads
HRI For SFE-14 (included) 32V/14A 19" of #14 leadwire With fuse and wire loop leads
HRJ For SFE-20 (included) 32V/20A 19" of #14 leadwire With fuse and wire loop leads
HRK X X 1/4” dia. x 7/8” to 11/4” 32V/15A #14 leadwire Universal with wire loop leads and
springs for different fuse lengths
Glass Tube In-Line Holders For 1/4" Diameter Fuses
Blister Max. Panel Ratings
Part No. Pack Thickness Knob Type Description/Mounting Terminals Volts/Amps
HKP X 0.3” Knob High-profile cover knob, rear hexnut Solder terminals 250V/30A
HKP-HH X 0.3" Knob High-profile cover knob, rear hexnut 1/4” quick-connect terminals 250V/15A
HTB-26I 0.3" Knob Low-profile cover knob, rear hexnut In-line 1/4” quick-connect terminals 250V/20A
HTB-38I 0.3" Screwdriver/slotted Low-profile cover knob, rear hexnut Right angle 1/4” quick-connect terminals 250V/20A
HTB-68I 0.3" Knob Low-profile cover knob, front hexnut Right angle 1/4” quick-connect terminals 250V/20A
HTB-88I 0.125" Knob Low-profile cover knob, through-hole snap Right angle 1/4” quick-connect terminals 250V/20A
HFA
HHB
HHK HHN HMK HRJ HRK
HTB-38I HTB-68IHTB-26I HTB-88IHKP-HH
Part No. Description
BP/ATM-TAP 5-Count: Taps into existing ATM fuse for additional non-fused
circuit, includes crimp-on connector that attaches easily to the
power lead for electronic gear.
BP/ATC-TAP 5-Count: Taps into existing ATC fuse by fitting over the leg for
additional non-fused circuit, includes crimp-on connector.
BP/HHH Converts ATM fuse circuit into two fusible circuits. Inserts into
ATM fuse block, added circuit 10A max.
BP/HHA Converts an ATC fuse circuit into two fusible circuits. Inserts into
ATC fuse block, added circuit 10A max.
Fuse Taps For ATM and ATC Fuses
Tap into an existing circuit to power a mobile phone, stereo components,
etc. with Cooper Bussmann fuse tap accessories. BP/ATM-TAP BP/ATC-TAP
BP/HHH BP/HHA
HFB
