Point-of-use surge suppression
products are the most cost-
ef fective mean s of protecting
valu able electr ical a nd electro nic
equipm ent. S urge s uppress ion
at t he point of entr ance gu ards
ag ains t tr an s ients ge ner ated
externally. Surge suppression
at the branch circuit panel board
Point of
Use TVSS
Protection
protects ag ains t s urg es
generated on other branch
circuits, but not against surges
originatin g o n t he s am e circ uit.
To com plete you r pr otec tive
network , look to Hubb ell’s com plete
line of SpikeShield point-of-use
products–f rom perm anently wired
d up l ex a n d 4-Pl ex®receptacles to
por table strip s.
SURGE SUP PRESSION RECEPTACLES
Hubbell has the broadest offering of TVSS receptacles in the industr y w ith
technology that is unsurpassed. Inside Hubbell TVSS receptacles are matched
pairs of four 18mm MOVs (two discs per package) prov iding 210 joules of surge
prote ction in each mode. The nylon component shield protec ts the PC board
from moisture and contaminants.An all-glass PC board provides superior
moisture immunity for longer life in humid environments.Conformal coating
is prov ided on PC board for additional moisture immunity.
Meets UL Standards 1449 2nd edition and 498;
CSA Certified (NEMA 5-15 configuration only).
Damage-alert alarm sounds when surge protection is
no longer functioning...and keeps sounding until the
receptacle is replaced or muting screw is utilized.
Muting screw allows damage-alert alarm to be
silenced until device is replaced.
Power-on indicator light verifies instantly that power
is available at the receptacle and the suppression
circuit is fully functional; light off means power has
been interrupted; flashing light indicates surge protection
circuitry has been damaged.
Distinctive surge symbol provides quick visual
identification of surge suppression receptacle.
High-impact nylon face resists breakage.
Automatic grounding clip attached to bridge
meets NEC Article 250-74, Exception No. 2.
Fits standard wall box.
IG8262S
SURGE SUP PRESSION RECEPTACLES
ORDERING INFORMATION
CATALOG # COLOR AMPERAGE DES CRIPTION
LED ONLY
HBL5260S Blue 15 Amp Led Only
HBL5260IS Ivor y 15 Amp Led Only
HBL5360S Blue 20 Amp Led Only
HBL5360IS Ivor y 20 Amp Led Only
LED & ALARM
HBL5262S Blue 15 Amp Led & Alarm
HBL5262IS Ivor y 15 Amp Led & Alarm
HBL5262GYS Gray 15 Amp Led & Alarm
HBL5262WS White 15 Amp Led & Alarm
HBL5362S Blue 20 Amp Led & Alarm
HBL5362IS Ivor y 20 Amp Led & Alarm
HBL5362GYS Gray 20 Amp Led & Alarm
HBL5362WS White 20 Amp Led & Alarm
ISOLATED GROUND
IG5262S Blue 15 Amp Isolated Ground with LED & Alarm
IG5262IS Ivor y 15 Amp Isolated Ground w ith LED & Alarm
IG5262GYS Gray 15 Amp Isolated Ground w ith LED & Alarm
IG5262WS White 15 Amp Isolated Ground with LED & Alarm
IG5262OS Orange 15 Amp Isolated Ground w ith LED & Alarm
IG5362S Blue 20 Amp Isolated Ground with LED & Alarm
IG5362IS Ivor y 20 Amp Isolated Ground w ith LED & Alarm
IG5362GYS Gray 20 Amp Isolated Ground w ith LED & Alarm
IG5362WS White 20 Amp Isolated Ground with LED & Alarm
IG5362OS Orange 20 Amp Isolated Ground w ith LED & Alarm
ISOLATED GROUND HOSPITAL GRADE
IG8262S Blue 15 Amp Isolated Ground Hospital Grade with LED & Alarm
IG8262IS Ivor y 15 Amp Isolated Ground Hospital Grade with LED & Alarm
IG8262GYS Gray 15 Amp Isolated Ground Hospital Grade with LED & Alarm
IG8262WS White 15 Amp Isolated Ground Hospital Grade with LED & Alarm
IG8262OS Orange 15 Amp Isolated Ground Hospital Grade with LED & Alarm
IG8262RS Red 15 Amp Isolated Ground Hospital Grade with LED & Alarm
IG8362S Blue 20 Amp Isolated G round Hospital Grade with LED & Alarm
IG8362IS Ivor y 20 Amp Isolated Ground Hospital Grade with LED & Alarm
IG8362GYS Gray 20 Amp Isolated Ground Hospital Grade with LED & Alarm
IG8362WS White 20 Amp Isolated Ground Hospital Grade with LED & Alarm
IG8362OS Orange 20 Amp Isolated Ground Hospital Grade with LED & Alarm
IG8362RS Red 20 Amp Isolated Ground Hospital Grade with LED & Alarm
All receptacles are UL Listed and CSA Certified (15A only).
HBL5260S
HBL5262GYS
IG5362OS
HBL8362RS
HBL420HS
Duplex Receptacles
4-Plex Receptacle
SURGE SUP PRESSION RECEPTACLES
ORDERING INFORMATION
CATALOG # COLOR AMPERAGE DES CRIPTION
HOSPITAL GRADE
HBL8262S Blue 15 Amp Hospital Grade with LED and Alarm
HBL8262IS Ivor y 15 Amp Hospital Grade with LED and Alarm
HBL8262GYS Gray 15 Amp Hospital Grade with LED and Alarm
HBL8262WS White 15 Amp Hospital Grade with LED and Alarm
HBL8262RS Red 15 Amp Hospital Grade with LED and Alarm
HBL8362S Blue 20 Amp Hospital Grade with LED and Alarm
HBL8362IS Ivor y 20 Amp Hospital Grade with LED and Alarm
HBL8362GYS Gray 20 Amp Hospital Grade with LED and Alarm
HBL8362WS White 20 Amp Hospital Grade with LED and Alarm
HBL8362RS Red 20 Amp Hospital Grade with LED and Alarm
4-PLEX
HBL420HS Blue 20 Amp 4-Plex Surge–Hospital Grade
HBL420HIS Ivory 20 Amp 4-Plex Surge–Hospital Grade
HBL415S Blue 15 Amp 4-Plex Surge
HBL415IS Ivor y 15 Amp 4-Plex Surge
HBL420S Blue 20 Amp 4-Plex Surge
HBL420IS Ivor y 20 Amp 4-Plex Surge
ACCESSORIES
HBL4APBL Accessories Adapter Plate Blue
HBL4API Accessories Adapter Plate Ivory
HBL4PBI Accessories Portable Box Ivory
All receptacles are UL Listed and CSA Certified (15A only).
DIMENSIONS
15A 120VAC
TRANSIENT
VOLTAGE
SURGE
SUPPRESSOR
ALARM OFF
HUBBEL
1.30"
(33.0) 1.75"
(44.5)
2.61"
(66.3)
3.28"
(83.3) 2.72"
(69.1)
P
R
O
T
E
C
T
E
D
W
H
E
N
L
I
G
H
T
E
D
Front View
1.24"
(31.5)
.05"
(1.27)
Side View
GROUND
BACK WIRE STRIP GAGE
USE CU WIRE ONLY
BLACK
WHITE
1.75"
(44.5)
2.72"
(69.1)
Back View
3.02"
(76.7)
3.38"
(85.9)
.104"
(26.4)
.921"
(23.4)
4.30"SQ.
(109.2)
Dimensions in inc hes (mm)
HBL8PS720M
SS6HG
ORDERING INFORMATION
APPLICATION/ # OF CIRCUIT ON/OFF SURGE STATUS
CATALOG # DES CRIP TION INPUT OUTLETS BREAKER SWITCH LED ALARM RATING
SS6HG Plug strip w/filtering, surge protection, 6
'
Power Cord 6 Yes Yes Yes Yes 15A, 420 joules
hospital grade receptacles & plug.
(182.9cm)
HBL6PS360 Plug strip w/ 4
'
Power Cord 6 Yes Yes Yes No 15A, 360 joules
surge protec tion. (121.9 cm)
HBL8PS480 Plug strip w/filtering & 6
'
Power Cord 8 Yes Yes Yes No 15A, 480 joules
surge protec tion. (182.9 cm)
HBL8PS480M Plug strip w/modem, 6
'
Power Cord 8 Yes Yes Yes No 15A, 480 joules
filtering & surge protec tion. (182.9 cm)
HBL8PS720 Plug strip w/filtering & 6
'
Power Cord 8 Yes Yes Yes No 15A, 720 joules
surge protec tion. (182.9 cm)
HBL8PS720M Plug strip w/modem, 6
'
Power Cord 8 Yes Yes Yes No 15A, 720 joules
filtering & surge protec tion. (182.9 cm)
SPIKESHIELD SURGE SUPP RESSION
PLUG STRIPS
The SpikeShield TVSS family from Hubbell offers a line of plug strips which
prov ides point-of-use protection against transients for any t y pe of sensitive
electronic equipment ranging from copiers to computers. The new plug strip
product line not only meets UL 1449,2nd Edition, but offers the innovation and
reliability you expect from Hubbell.
The SpikeShield plug strip line incorporates the same technolog y that you
find in the serv ice entrance and branch panel surge suppression products.
Features like thermal fusing, sine wave tr acking, noise filtration and a UL 330
volt clamping level. These products are also available w ith 6 or 8 outlets, fax
and modem connections,LED status indicators and a resettable 15 amp circuit
breaker.All SpikeShield plug strips come with a lifetime warrant y for both
product and connec ted equipment.
SpikeShield plug strips prov ide protection from damag ing transients and
are ideal for use in offices, schools, hospitals and laboratories; anywhere sensitive
electronic equipment is being used.
FEATURES BENEFITS
Thermal fusing Thermal fuse remains functional to pre vent
the MOV from overheating when exposed
to high current levels, a Hubbell exclusive.
Noise filtering circuit Reduces hig h-frequency noise or
interference which can cause operational
or data errors.
Resettable 15 amp circuit breaker with Full 15 amp connecte d load capacity.
overload and short-circuit protection
LED status indicator Provides visual indication of plug str ip
status.
Sine wave tracking Provides unifor m clamping throughout the
sine wave*.
*Does not apply to HBL6PS360
SURGE SUPPRESSION RECEPTACLES
Part Duplex 4-Plex
Typical Specification – HBL5262S/HBL5362S Receptacle 15A/20A 15A/20A
Top Nylon Lexan
Base Nylon Lexan
Type – 2 Pole,3 Wire,Grounding Tandem Modified By-Pass .031" (.8) Brass .032" Brass Triple Wipe
Power Contacts Power Contacts
Rating – 15A,125V/20A,125V Mounting Strap. 050" (1.3) Steel-Zinc Coated –
Certification – UL Listed File E2186 Clamping Plate .031" (.8) Brass .031" Brass-Line Terminal Plate
Listed to UL Standards 498 Receptacles Terminal Screws Brass #8-32 .031" Brass Neutral-Terminal Plate
Meets UL1449,2nd Edition Transient Voltage Surge Suppressors Hex Hd.Grounding Screw Steel (Green) Brass (Green)
CSA Certified to Specification C22.2 Auto Grd.Clip Stainless Steel Ground Plate – .050"
No.42M (15A only)
ANSI/IEEE C62.41 (IEEE 587) Mounting Screws Steel-Zinc Plated Brass
Installation Categories “A”(Ring Wave) LED Red Green
“B”(Unidirectional Impulse) Alarm Muting Screw Nylon –
Performance
Electrical Duplex 4-Plex
Operation Frequency: 60Hz. 60Hz.
Voltage: 120V AC +10%-15%. 120V AC +10%-15%
Response Time*: Approximately 5 ns. Approximately 5 ns.
Protection Modes: Normal and Common Modes. Normal and Common Modes.
Transient Suppression: Peak Energy (10 x 100 µs) Peak Current (8 x 20 µs) Peak Energy (10 x 100 µs) Peak Current (8 x 20 µs)
Normal Mode (L-N): 210 joules 13000A 80 joules 6500A
Common Mode (L-G),(N-G): 210 joules 13000A 80 joules 6500A
Suppressed Voltage:
UL 1449,2nd Edition (8 x 20 µs 500A): 400V 600V
UL Listed: 400V max. 600V max.
EMI/RFI Attenuation at 50 Ohms Normal Mode: 40 dB 500kHz - 100MHz. 60 Hz
Operating Temperature: 32°to 140°F (0°to 60°C) -40°to 140°F (-40°to 60°C)
Flammability: UL 94-V2. UL 94-V2.
SPIKESHIELD SURGE SUPPRESSION PLUG STRIPS
HBL6PS360 HBL8PS480(M) HBL8PS720(M) SS6HG
Operating Specifications
Nominal line voltage: 120 120 120 120
Max.cont.operating voltage: 130 130 130 130
Operating frequency: 50/60/400 Hz 60 Hz
Max.surge current: 27KA 36KA 54KA 39KA
AC Modem 250A 750A 1200A -
Joule rating 360 480 720 420
Operating temperature: 14°to +140°F (-10°to +60°C) 32°to 104°F (0°to 40°C)
Diagnostics: Protection & Outlet Status LEDs Audible Alarm with LED Status
Performance
UL1449,2nd edition
Clamping voltage: 330 V 330 V 330 V 330V
ANSI/IEEE C62.41:
Clamping voltage:
Category A3 200A (Ringwave) 330 320 180 –
Category B3 500A (Ringwave) 380 340 190 330
Category C1 3000A (Impulse) 400 380 340 500
EMI/RFI noise rejection: 0-25dB 20-40dB 30-60dB 60-80dB
Thermal fusing: Yes Yes Yes –
Sine wave tracking: – Yes Yes –
Mechanical Description
Dimension: 1.65”H x 2.17”W x 12.”L 1.70”H x 3.45”W x 10.52”L 1.70”H x 3.45”W x 10.52”L1.16" x 2.25" W x 15.75" L
(41.91 x 54.99 x 304.8mm) (43.21 x 87.63 x 267.11mm) (43.21 x 87.63 x 267.11mm)(29.46 x 57.15 x 400mm)
Housing ratings: Indoor use only
Product weight: 1.02 lb.(.463kg) 1.09 lb.(.495kg) 1.10 lb.(.5kg) 2.90 lbs.(1.08 kg)
Warranty
Product Lifetime Lifetime Lifetime
Downline $2,500 $10,000 $25,000
SPECIFICATIONS
