o16mm H6 Series Switches & Pilot Lights H6 Series Miniature Switches & Pilot Lights o16 Designed to ensure ease of operation and safety Ideal for heavy duty applications such as machine tools * Removable contact block makes installation and removal easy. * Large operators; bezel size (o24 mm, 24x24 mm) * High operating force and long stroke prevent inadvertent operation. * Contact blocks can be removed when units are mounted col lectively. * Shock- and vibration-resistant rugged design * UL recognized, CSA certified * EN compliant (EN 60947-1, EN 60947-5-1, TUV approved) Applicable Standards Mark File No. or Organization UL Recognition File No. E55996 UL508 CSA File No. LR 21451 CSA C22.2 No.14 TUV Rheinland EN60947-5-1 EU Low Voltage Directive CCC No.2013010305591762 GB14048.5 Contact Ratings Specifications Gold Contact Rated Insulation Voltage Rated Thermal Current Rated Operating Voltage Rated Operating Current (resistive load) Contact Material 250V 3A 125V AC 30V DC 0.1A 0.1A Operating Temperature -25 to +55C (no freezing) Storage Temperature -30 to +80C Operating Humidity 45 to 85% RH (no condensation) Contact Resistance 50 mW maximum (initial value) Insulation Resistance 100 MW minimum (500V DC megger) Between live part and ground: 2,500V, 1 minute Between terminals of different poles: 2,500V, 1 minute Between terminals of the same pole: 1,000V, 1 minute Gold plated silver Minimum applicable load (reference value): 5V AC/DC, 1 mA (Applicable range is subject to the operating condition and load.) Dielectric Strength Silver Contact Rated Insulation Voltage Rated Thermal Current Rated Operating Voltage Resistive Load AC Rated 50/60 Hz Inductive Load Operating Resistive Load Current DC Inductive Load Contact Material 250V 5A 125V 3A 2A 0.4A 0.2A Silver 30V -- -- 2A 1A Switch Unit Illumination Unit 250V 2A 1.5A -- -- AC inductive load: PF = 0.6 to 0.7, DC inductive load: L/R = 7 ms maximum Vibration Resistance Operating extremes: 5 to 55 Hz, amplitude 0.5 mm Shock Resistance Operating extremes: 100 m/s2 (10G) Damage limits: 1,000 m/s2 (100G) Mechanical Durability (minimum operations) Momentary: 1,000,000 Maintained: 200,000 Selector switch: 250,000 Key selector switch: 250,000 Illuminated selector switch: 250,000 Selector pushbutton: 250,000 Built-in LED Lamp Ratings Rated Voltage Operating Voltage Part No. Lamp Base 5V DC 6V AC/DC 5V DC 5% 6V AC/DC 10% 12V AC/DC 12V AC/DC 10% LFTD-1 24V AC/DC 24V AC/DC 10% LFTD-2 LFTD-5 LFTD-6 SX6S/8x5.4 A, G, A, G, A, G, S A, R G, PW S S S PW, R PW, R PW, R Current DC 8mA 7mA 7mA 7mA 6mA 8mA 7mA 8mA 7mA Draw AC -- 9mA 10mA 9mA 9mA 8mA 9mA 8mA Lamp Base Color Same as illumination color (PW: gray) Voltage Marking Die stamped on the lamp base Approx. 50,000 hours Life (reference (When used on complete DC at 25C, luminance value) reduces to 50% of the initial intensity.) LFTD-5 LFTD-6/LFTD-1/LFTD-2 X1 Internal Circuit (+) (-) X2 LED Chip Protection Diode Zener Diode Resistor * Specify a color code in place of in the Part No. A (amber), G (green), PW (pure white), R (red), S (blue) * Use a PW (pure white) LED lamp for yellow illumination. 2 Between live part and ground: 2,500V, 1 minute Electrical Durability (minimum operations) Momentary: 100,000 (at 1,800 operations/hour) Maintained: 100,000 (at 1,200 operations/hour) Selector switch: 100,000 Degree of Protection IP65 (IEC 60529) Terminal Style Solder/tab terminal #110 PC board terminal Weight (approx.) HA1L-M1C24: HA1P-1C04: HA1P-14: HA1B-M1C2: HA1S-2C2: HA1K-2C2A: HA1F-2C24: 18g 17g 13g 16g 18g 33g 20g H6 Series Miniature Switches & Pilot Lights o16 HA1L/HA2L Illuminated Pushbuttons Style Operation Contact Material Operating Voltage Contact 5V DC 5% SPDT DPDT 12V AC/DC 10% SPDT DPDT 24V AC/DC 10% SPDT DPDT SPDT Round HA1L Gold Momentary Silver Maintained Silver Marking plate size: o18.4mm Engraving area: o16.8mm (Depth: 0.5mm max.) DPDT HA1L-M1C61 12V AC/DC 10% SPDT DPDT HA1L-M1C53 HA1L-M1C63 24V AC/DC 10% SPDT DPDT SPDT HA1L-M1C54 HA1L-M1C64 HA1L-A1C11 DPDT HA1L-A1C21 12V AC/DC 10% SPDT DPDT HA1L-A1C13 HA1L-A1C23 24V AC/DC 10% 5V DC 5% SPDT DPDT SPDT HA1L-A1C14 HA1L-A1C24 HA1L-A1C51 DPDT HA1L-A1C61 12V AC/DC 10% SPDT DPDT HA1L-A1C53 HA1L-A1C63 24V AC/DC 10% SPDT DPDT HA1L-A1C54 HA1L-A1C64 5V DC 5% SPDT DPDT HA2L-M1C11 HA2L-M1C21 12V AC/DC 10% SPDT DPDT HA2L-M1C13 HA2L-M1C23 24V AC/DC 10% 5V DC 5% SPDT DPDT SPDT HA2L-M1C14 HA2L-M1C24 HA2L-M1C51 DPDT HA2L-M1C61 12V AC/DC 10% SPDT DPDT HA2L-M1C53 HA2L-M1C63 24V AC/DC 10% SPDT DPDT HA2L-M1C54 HA2L-M1C64 5V DC 5% SPDT DPDT HA2L-A1C11 HA2L-A1C21 12V AC/DC 10% SPDT DPDT HA2L-A1C13 HA2L-A1C23 24V AC/DC 10% HA2L-A1C14 HA2L-A1C24 5V DC 5% SPDT DPDT SPDT DPDT HA2L-A1C61 12V AC/DC 10% SPDT DPDT HA2L-A1C53 HA2L-A1C63 24V AC/DC 10% SPDT DPDT HA2L-A1C54 HA2L-A1C64 Square HA2L Gold Momentary Silver Gold Maintained Marking plate size: 18.4mm Engraving area: 16.4mm (Depth: 0.5mm max.) Silver Illumination Color Code HA1L-M1C51 5V DC 5% 5V DC 5% Gold Part No. Solder/Tab PC Board Terminal Terminal HA1L-M1C11 HA1L-M1C11V HA1L-M1C21 HA1L-M1C21V HA1L-M1C13 HA1L-M1C13V HA1L-M1C23 HA1L-M1C23V HA1L-M1C14 HA1L-M1C14V HA1L-M1C24 HA1L-M1C24V -- HA1L-A1C11V HA1L-A1C21V HA1L-A1C13V HA1L-A1C23V HA1L-A1C14V HA1L-A1C24V -- HA2L-M1C11V HA2L-M1C21V HA2L-M1C13V HA2L-M1C23V HA2L-M1C14V HA2L-M1C24V Specify a color code in place of in the Part No. A: amber G: green PW: pure white R: red S: blue Y: yellow -- HA2L-A1C11V HA2L-A1C21V HA2L-A1C13V HA2L-A1C23V HA2L-A1C14V HA2L-A1C24V HA2L-A1C51 -- * See page 25 for marking plate size and engraving area. * One LED lamp is installed in an illuminated pushbutton. 3 o16 H6 Series Miniature Switches & Pilot Lights HA3L/HA4L/HA1L-M3/A3 Illuminated Pushbuttons Part No. Solder/Tab PC Board Terminal Terminal Round w/Square Bezel SPDT HA3L-M1C11 HA3L-M1C11V 5V DC HA3L 5% DPDT HA3L-M1C21 HA3L-M1C21V SPDT HA3L-M1C13 HA3L-M1C13V 12V AC/DC Gold 10% DPDT HA3L-M1C23 HA3L-M1C23V SPDT HA3L-M1C14 HA3L-M1C14V 24V AC/DC 10% DPDT HA3L-M1C24 HA3L-M1C24V Momentary SPDT HA3L-M1C51 5V DC 5% DPDT HA3L-M1C61 SPDT HA3L-M1C53 12V AC/DC -- Silver 10% DPDT HA3L-M1C63 SPDT HA3L-M1C54 24V AC/DC 10% DPDT HA3L-M1C64 SPDT HA3L-A1C11V HA3L-A1C11 5V DC 5% DPDT HA3L-A1C21V HA3L-A1C21 SPDT HA3L-A1C13V HA3L-A1C13 12V AC/DC Gold 10% DPDT HA3L-A1C23V HA3L-A1C23 SPDT HA3L-A1C14V HA3L-A1C14 24V AC/DC 10% DPDT HA3L-A1C24V HA3L-A1C24 Maintained SPDT HA3L-A1C51 5V DC 5% DPDT HA3L-A1C61 SPDT HA3L-A1C53 12V AC/DC -- Silver 10% DPDT HA3L-A1C63 Marking plate size: o18.4mm Engraving area: o16.8mm SPDT HA3L-A1C54 24V AC/DC (Depth: 0.5mm max.) 10% DPDT HA3L-A1C64 Square w/Four-sided SPDT HA4L-M1C11 HA4L-M1C11V 5V DC Barrier HA4L 5% DPDT HA4L-M1C21 HA4L-M1C21V SPDT HA4L-M1C13 HA4L-M1C13V 12V AC/DC Gold 10% DPDT HA4L-M1C23 HA4L-M1C23V SPDT HA4L-M1C14 HA4L-M1C14V 24V AC/DC 10% DPDT HA4L-M1C24 HA4L-M1C24V Momentary SPDT HA4L-M1C51 5V DC 5% DPDT HA4L-M1C61 SPDT HA4L-M1C53 12V AC/DC -- Silver Marking plate size: 10% DPDT HA4L-M1C63 18.4mm SPDT HA4L-M1C54 24V AC/DC Engraving area: 16.4mm 10% DPDT HA4L-M1C64 (Depth: 0.5mm max.) o30 Mushroom SPDT HA1L-M3C11 HA1L-M3C11V 5V DC HA1L-3 5% DPDT HA1L-M3C21 HA1L-M3C21V SPDT HA1L-M3C13 HA1L-M3C13V 12V AC/DC Gold 10% DPDT HA1L-M3C23 HA1L-M3C23V SPDT HA1L-M3C14 HA1L-M3C14V 24V AC/DC 10% DPDT HA1L-M3C24 HA1L-M3C24V Momentary SPDT HA1L-M3C51 5V DC 5% DPDT HA1L-M3C61 SPDT HA1L-M3C53 12V AC/DC -- Silver 10% DPDT HA1L-M3C63 SPDT HA1L-M3C54 24V AC/DC 10% DPDT HA1L-M3C64 SPDT HA1L-A3C11 HA1L-A3C11V 5V DC 5% DPDT HA1L-A3C21V HA1L-A3C21 SPDT HA1L-A3C13V HA1L-A3C13 12V AC/DC Gold 10% DPDT HA1L-A3C23V HA1L-A3C23 SPDT HA1L-A3C14V HA1L-A3C14 24V AC/DC 10% DPDT HA1L-A3C24V HA1L-A3C24 Maintained SPDT HA1L-A3C51 5V DC 5% DPDT HA1L-A3C61 SPDT HA1L-A3C53 12V AC/DC -- Silver 10% Marking plate size: o14.8mm DPDT HA1L-A3C63 Engraving area: o12.8mm SPDT HA1L-A3C54 24V AC/DC (Depth: 0.5mm max.) 10% DPDT HA1L-A3C64 * See page 25 for marking plate size and engraving area. * One LED lamp is installed in an illuminated pushbutton. Style 4 Operation Contact Material Operating Voltage Contact Illumination Color Code Specify a color code in place of in the Part No. A: amber G: green PW: pure white R: red S: blue Y: yellow H6 Series Miniature Switches & Pilot Lights o16 Dimensions Round Square Round w/Square Bezel 6.4 6.8 1.45 6.8 1.45 Anti-rotation Ring Left Contact 0.6 Round PC Board Terminal Width 0.8x0.5t 2.6 Square Round w/Square Bezel Square w/4-sided Barrier 24 24 24 4 Terminal Width 2.8x0.5t 6 1.2 15.8 5 5 6 1 1 o2 K C LO R15.5 o21 9 6.4 Panel Thickness 0.5 to 6 Rubber Gasket Right Contact Locking Ring 2 17.8 10.5 9 5.5 PC Board Terminal Type 13.5 36 11 Solder/Tab Terminal Type Mushroom 6.4 Panel Thickness 0.5 to 6 Rubber Gasket Locking Ring 6.8 1.45 LOCK TOP Anti-rotation Ring R15.5 LO 0.6 Tab Terminal Width 2.8x0.5t NC 6 1.2 2R0 .6 2.6 1 17.8 13.5 11 36 20 PC Board Drilling Layout (Bottom View) o1 o16.2 NC NO NC Lamp Terminal (-) * SPDT has C, NO, and NC on the right only. * X2 and X2 are wired internally. * See Single Board Mounting on page 25 for details about PC boards. +0.2 0 35 min. Mushroom ho C 5 5 24 min. les .2 NO Lamp Terminal (+) C 6.8 1.45 1 (TOP) X1 6.4 +0.2 0 24 min. Terminal Arrangement (Bottom View) (TOP) Round Square Round w/Square Bezel o16.2 10.5 X2 Mounting Hole Layout Mounting Centers 9 X2 NO NO C C X2 X2 6 NC X1 15.8 o21 1 o3 0 CK Note: Determine mounting centers to ensure easy operation. 35 min. All dimensions in mm. 5 o16 H6 Series Miniature Switches & Pilot Lights HA1P/HA2P/HA3P/HA4P Pilot Lights W/Removable Contact Block Shape Round HA1P Marking plate size: o18.4mm Engraving area: o16.8mm (Depth: 0.5mm max.) Square HA2P Marking plate size: 18.4mm Engraving area: 16.4mm (Depth: 0.5mm max.) Round w/Square Bezel HA3P Marking plate size: o18.4mm Engraving area: o16.8mm (Depth: 0.5mm max.) Square w/Four-sided Barrier HA4P Marking plate size: 18.4mm Engraving area: 16.4mm (Depth: 0.5mm max.) Operating Voltage Part No. Solder/Tab Terminal PC Board Terminal 5V DC 5% HA1P-1C01 HA1P-1C01V 12V AC/DC 10% HA1P-1C03 HA1P-1C03V 24V AC/DC 10% HA1P-1C04 HA1P-1C04V 5V DC 5% HA2P-1C01 HA2P-1C01V 12V AC/DC 10% HA2P-1C03 HA2P-1C03V 24V AC/DC 10% HA2P-1C04 HA2P-1C04V 5V DC 5% HA3P-1C01 HA3P-1C01V 12V AC/DC 10% HA3P-1C03 HA3P-1C03V 24V AC/DC 10% HA3P-1C04 HA3P-1C04V 5V DC 5% HA4P-1C01 HA4P-1C01V 12V AC/DC 10% HA4P-1C03 HA4P-1C03V 24V AC/DC 10% HA4P-1C04 HA4P-1C04V Illumination Color Code Specify a color code in place of in the Part No. A: amber G: green PW: pure white R: red S: blue Y: yellow * See page 7 for dimensions. * See page 25 for marking plate size and engraving area. * One LED lamp is installed in an illuminated pilot light. Unibody Shape Round HA1P Marking plate size: o18.4mm Engraving area: o16.8mm (Depth: 0.5mm max.) Square HA2P Marking plate size: 18.4mm Engraving area: 16.4mm (Depth: 0.5mm max.) Round w/Square Bezel HA3P Marking plate size: o18.4mm Engraving area: o16.8mm (Depth: 0.5mm max.) Square w/Four-sided Barrier HA4P Marking plate size: 18.4mm Engraving area: 16.4mm (Depth: 0.5mm max.) Operating Voltage Part No. Solder/Tab Terminal PC Board Terminal 5V DC 5% HA1P-11 -- 12V AC/DC 10% HA1P-13 -- 24V AC/DC 10% HA1P-14 -- 5V DC 5% HA2P-11 -- 12V AC/DC 10% HA2P-13 -- 24V AC/DC 10% HA2P-14 -- 5V DC 5% HA3P-11 -- 12V AC/DC 10% HA3P-13 -- 24V AC/DC 10% HA3P-14 -- 5V DC 5% HA4P-11 -- 12V AC/DC 10% HA4P-13 -- 24V AC/DC 10% HA4P-14 -- * See page 7 for dimensions. * See page 25 for marking plate size and engraving area. * One LED lamp is installed in an illuminated pilot light. 6 Illumination Color Code Specify a color code in place of in the Part No. A: amber G: green PW: pure white R: red S: blue Y: yellow H6 Series Miniature Switches & Pilot Lights o16 Dimensions Panel Thickness 0.5 to 6 Rubber Gasket Locking Ring 7.85 7.85 W/Removable Contact Block 9 T OP LOCK Antirotation Ring 0.6 Round Terminal Width 2.8x0.5t Round w/Square Bezel Square w/4sided Barrier 6 5 5 6 NC 1.2 C NO COM X1 X2 COM C X2 NO NC 1 1 K o21 15.8 Square o2 4 2.6 C LO R15.5 PC Board Terminal Width 0.8x0.5t 2 17.8 Square Round w/Square Bezel 2 9 5.5 PC Board Terminal Type Unibody 10.5 13.5 36 11 24 24 24 Solder/Tab Terminal Type Panel Thickness 0.5 to 6 Rubber Gasket Locking Ring T OP Antirotation Ring 0.6 Terminal Width 2.8x0.5t Round Round w/Square Bezel Square w/Foursided barrier 1.2 6 o2 4 2.6 Square 13 Round 23 10 24 24 27.5 24 11 Solder/Tab Terminal Type PC Board Terminal Model o16.2 Terminal Arrangement (Bottom View) W/Removable Contact Block +0.2 0 les .2 o1 ho Lamp Terminal (-) (TOP) Lamp Terminal (-) X1 X2 5 5 24 min. X2 Lamp Teminal (+) Lamp Teminal (+) X1 (TOP) 1 24 min. (TOP) 7.85 Unibody X2 PC Board Drilling Layout (Bottom View) X2 Mounting Hole Layout Mounting Centers * X2 and X2 are connected internally. * See Single Board Mounting on page 25 for details about PC boards. All dimensions in mm. 7 o16 H6 Series Miniature Switches & Pilot Lights HA1B/HA2B/HA3B/HA4B Pushbuttons Shape Button Style Round HA1B-1 Operation Contact Gold Momentary Silver Button Gold Maintained Silver Gold Momentary Silver Illumination Lens Gold Maintained Silver Square HA2B-1 Gold Momentary Silver Button Gold Maintained Silver Gold Flush Momentary Silver Illumination Lens Gold Maintained Silver Round w/Square Bezel HA3B-1 Gold Momentary Silver Button Gold Maintained Silver Gold Momentary Silver Illumination Lens Gold Maintained Silver Square w/Four-sided Barrier HA4B-M1 Gold Button Momentary Silver Illumination Maintained Lens Gold Silver SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT Part No. Solder/Tab Terminal PC Board Terminal HA1B-M1C1 HA1B-M1C1V HA1B-M1C2V HA1B-M1C2 -- HA1B-M1C5 -- HA1B-M1C6 HA1B-A1C1V HA1B-A1C1 HA1B-A1C2V HA1B-A1C2 -- HA1B-A1C5 -- HA1B-A1C6 HA1B-M1C1VL HA1B-M1C1L HA1B-M1C2VL HA1B-M1C2L -- HA1B-M1C5L -- HA1B-M1C6L HA1B-A1C1VL HA1B-A1C1L HA1B-A1C2VL HA1B-A1C2L -- HA1B-A1C5L -- HA1B-A1C6L HA2B-M1C1 HA2B-M1C1V HA2B-M1C2V HA2B-M1C2 -- HA2B-M1C5 -- HA2B-M1C6 HA2B-A1C1V HA2B-A1C1 HA2B-A1C2V HA2B-A1C2 -- HA2B-A1C5 -- HA2B-A1C6 HA2B-M1C1VL HA2B-M1C1L HA2B-M1C2VL HA2B-M1C2L -- HA2B-M1C5L -- HA2B-M1C6L HA2B-A1C1VL HA2B-A1C1L HA2B-A1C2VL HA2B-A1C2L -- HA2B-A1C5L -- HA2B-A1C6L HA3B-M1C1 HA3B-M1C1V HA3B-M1C2V HA3B-M1C2 -- HA3B-M1C5 -- HA3B-M1C6 HA3B-A1C1V HA3B-A1C1 HA3B-A1C2V HA3B-A1C2 -- HA3B-A1C5 -- HA3B-A1C6 HA3B-M1C1VL HA3B-M1C1L HA3B-M1C2VL HA3B-M1C2L -- HA3B-M1C5L -- HA3B-M1C6L HA3B-A1C1VL HA3B-A1C1L HA3B-A1C2VL HA3B-A1C2L -- HA3B-A1C5L -- HA3B-A1C6L HA4B-M1C1 HA4B-M1C1V HA4B-M1C2V HA4B-M1C2 -- HA4B-M1C5 -- HA4B-M1C6 HA4B-M1C1VL HA4B-M1C1L HA4B-M1C2VL HA4B-M1C2L -- HA4B-M1C5L -- HA4B-M1C6L Color Code B: black G: green R: red S: blue W: white Y: yellow A: amber G: green R: red S: blue W: white Y: yellow B: black G: green R: red S: blue W: white Y: yellow A: amber G: green R: red S: blue W: white Y: yellow B: black G: green R: red S: blue W: white Y: yellow A: amber G: green R: red S: blue W: white Y: yellow B: G: R: S: W: Y: A: G: R: S: W: Y: black green red blue white yellow amber green red blue white yellow * Specify a color code in place of or in the Part No. * For dimensions, see page 10. * Illuminated lenses cannot be installed on button type pushbuttons. * Black lens type is available for illumination lens type (not CCC approved). Clear lens and black marking plate are used. To specify, insert B in place of in the part number. Example: HA1B-M1C2LB. 8 H6 Series Miniature Switches & Pilot Lights o16 HA1B/HA2B/HA3B/HA4B Pushbuttons Shape Button Style Round HA1B-2 Operation Contact Gold Momentary Silver Gold Maintained Silver Square HA2B-2 Gold Momentary Silver Gold Extended Maintained Silver Round w/Square Bezel HA3B-2 Gold Momentary Silver Button Gold Maintained Silver Square w/Four-sided Barrier HA4B-M2 SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT Part No. Solder/Tab Terminal PC Board Terminal HA1B-M2C1V HA1B-M2C1 HA1B-M2C2V HA1B-M2C2 -- HA1B-M2C5 -- HA1B-M2C6 HA1B-A2C1V HA1B-A2C1 HA1B-A2C2V HA1B-A2C2 -- HA1B-A2C5 -- HA1B-A2C6 HA2B-M2C1V HA2B-M2C1 HA2B-M2C2V HA2B-M2C2 -- HA2B-M2C5 -- HA2B-M2C6 HA2B-A2C1V HA2B-A2C1 HA2B-A2C2V HA2B-A2C2 -- HA2B-A2C5 DPDT HA2B-A2C6 -- SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT HA3B-M2C1 HA3B-M2C2 HA3B-M2C5 HA3B-M2C6 HA3B-A2C1 HA3B-A2C2 HA3B-A2C5 HA3B-A2C6 HA3B-M2C1V HA3B-M2C2V -- -- HA3B-A2C1V HA3B-A2C2V -- -- SPDT HA4B-M2C1 HA4B-M2C1V DPDT HA4B-M2C2 HA4B-M2C2V SPDT HA4B-M2C5 -- DPDT HA4B-M2C6 -- SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT HA1B-M3C1 HA1B-M3C2 HA1B-M3C5 HA1B-M3C6 HA1B-A3C1 HA1B-A3C2 HA1B-A3C5 HA1B-A3C6 HA1B-M3C1V HA1B-M3C2V -- -- HA1B-A3C1V HA1B-A3C2V -- -- Color Code B: black G: green R: red S: blue W: white Y: yellow Gold Momentary o30mm Mushroom Silver Round HA1B-3 Gold Momentary Silver Gold Maintained Silver * Specify a color code in place of in the Part No. * For dimensions, see page 10. 9 o16 H6 Series Miniature Switches & Pilot Lights Dimensions Flush Panel Thickness 0.5 to 6 Rubber Gasket Locking Ring LOCK T OP 6.8 1.45 6.8 1.45 9 Antirotarion Ring 0.6 Terminal Width 2.8x0.5t Round Square Square w/4sided Barrier o2 Round w/Square Bezel 6 6 5 5 NO C NC NO C 2 17.8 10.5 1.2 o21 15.8 NC 1 1 K C 4 2.6 LO R15.5 PC Board Terminal Width 0.8x0.5t PC Board Terminal Type 13.5 36 9 5.5 11 24 24 24 Solder/Tab Terminal Type Extended Terminal Width 2.8x0.5t Terminal Width 2.8x0.5t 2.6 1.2 1.2 6 66 20 20 6 1 1 2.6 10.5 13.5 9 36 10.5 13.5 9 36 11 11 15.1 15.1 Terminal Width 2.8x0.5t o30mm Mushroom Terminal Width 2.8x0.5t 2.6 0 o3 2.6 1.2 1.2 6 66 6 1 1 0 o3 10.5 13.5 9 36 10.5 13.5 9 36 11 1120 20 Mounting Hole Layout Mounting Centers PC Board Drilling Layout (Bottom View) Terminal Arrangement (Bottom View) PC Board Terminal Model (TOP) +0.2 0 (TOP) .2 o1 NC les NO NO ho * 35 min. for mushroom type Note: Determine mounting centers to ensure easy operation. C 24 min C 5 5 1 24 min. 6.8 1.45 NC o16.2 * SPDT has C, NO, and NC on the right only. * See Single Board Mounting on page 25 for details about PC boards. All dimensions in mm. 10 H6 Series Miniature Switches & Pilot Lights o16 HA1S/HA3S Selector Switches Part No. Shape Operator Position Operation Round HA1S L Maintained R Gold Silver 90 2-position Spring return from right L R Gold Silver L Maintained 45 3-position Contact Spring return from right L Spring return from left L Spring return two-way L Round w/Square Bezel HA3S C C C C R R R R 45 3-position L R Maintained L Spring return from right L Spring return from left L Spring return two-way L C C C R R R R DPDT HA1S-2C2 HA1S-2C2V SPDT HA1S-2C5 -- DPDT HA1S-2C6 SPDT HA1S-21C1 HA1S-21C1V DPDT HA1S-21C2 HA1S-21C2V -- SPDT HA1S-21C5 -- DPDT HA1S-21C6 -- HA1S-3C2 DPDT HA1S-3C6 Gold DPDT HA1S-31C2 Silver DPDT HA1S-31C6 Gold DPDT HA1S-32C2 HA1S-3C2V -- HA1S-31C2V -- HA1S-32C2V Silver DPDT HA1S-32C6 Gold DPDT HA1S-33C2 Silver DPDT HA1S-33C6 SPDT HA3S-2C1 HA3S-2C1V DPDT HA3S-2C2 HA3S-2C2V Gold Silver C HA1S-2C1V DPDT Silver Spring return from right HA1S-2C1 Gold R 90 2-position PC Board Terminal SPDT Silver Gold L Maintained Solder/Tab Terminal Gold -- HA1S-33C2V -- SPDT HA3S-2C5 -- DPDT HA3S-2C6 -- SPDT HA3S-21C1 HA3S-21C1V DPDT HA3S-21C2 HA3S-21C2V SPDT HA3S-21C5 DPDT HA3S-21C6 DPDT HA3S-3C2 Silver DPDT HA3S-3C6 Gold DPDT HA3S-31C2 Silver DPDT HA3S-31C6 Gold DPDT HA3S-32C2 Silver DPDT HA3S-32C6 Gold DPDT HA3S-33C2 Silver DPDT HA3S-33C6 -- -- HA3S-3C2V -- HA3S-31C2V -- HA3S-32C2V -- HA3S-33C2V -- * Bezel: black * Knob: black with white indicator * See page 12 for dimensions. Contact Operation Operator Position & Contact Operation (Top View) Positions Contact Left Center Right NO NC NO NC SPDT L 90 2-position L R Maintained -- C R L C R Maintained L C R Spring return from right L C R L Left Contact Right Contact NO NC NO NC Left Contact Right Contact NO NC NO NC Spring return from right DPDT -- C 45 3-position C C Left Contact Right Contact NO NC NO NC R Spring return Spring return from left two-way C C Left Contact Right Contact NO NC NO NC C Left Contact Right Contact NO NC NO NC DPDT C C C C C C 11 o16 H6 Series Miniature Switches & Pilot Lights Dimensions Panel Thickness 0.5 to 6 Rubber Gasket Locking Ring Right Contact LOCK 6.8 1.45 6.8 1.45 T OP 0.6 Antirotation Ring Left Contact Round Terminal Width 2.8x0.5t 1 1 1.2 6 5 PC Board Terminal Type Mounting Hole Layout Mounting Centers 10.5 9 5.5 13.5 36 11 19.5 24 Solder/Tab Terminal Type PC Board Drilling Layout (Bottom View) +0.2 0 (TOP) (TOP) Note: Determine mounting centers to ensure easy operation. .2 o1 les ho * See Single Board Mounting on page 25 for details about PC boards. NO NO C 24 min. C 5 5 1 NC 6.8 1.45 24 min. Terminal Arrangement (Bottom View) NC NO C 5 6 NC NC NO C o21 15.8 o2 K 4 C 2 17.8 o16.2 Round w/Square Bezel 2.6 LO R15.5 PC Board Terminal Width 0.8x0.5t * SPDT has C, NO, and NC on the right only. All dimensions in mm. 12 H6 Series Miniature Switches & Pilot Lights o16 HA1K Key Selector Switches Shape Keys Retained at Operator Position Round HA1K L A R Contact SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT Gold Silver L Maintained R Gold B Silver 90 2-position L C R Gold Silver L Spring return from right R B Maintained 45 3-position Spring return from right Spring return from left Spring return two-way A L B L C L D L E L G L H L B L D L G L C L D L H L D L C C C C C C C C C C C C C C R R R R R R R R R R R R R R Gold Silver Gold Silver Gold Silver Gold Silver Gold Silver Gold Silver Gold Silver Gold Silver Gold Silver Gold Silver Gold Silver Gold Silver Gold Silver Gold Silver Gold Silver Gold Silver Part No. Solder/Tab Terminal PC Board Terminal HA1K-2C1A HA1K-2C1VA HA1K-2C2A HA1K-2C2VA HA1K-2C5A -- HA1K-2C6A -- HA1K-2C1B HA1K-2C1VB HA1K-2C2B HA1K-2C2VB HA1K-2C5B -- HA1K-2C6B -- HA1K-2C1C HA1K-2C1VC HA1K-2C2C HA1K-2C2VC HA1K-2C5C -- HA1K-2C6C -- HA1K-21C1B HA1K-21C1VB HA1K-21C2B HA1K-21C2VB HA1K-21C5B -- HA1K-21C6B -- HA1K-3C2A HA1K-3C2VA HA1K-3C6A -- HA1K-3C2B HA1K-3C2VB HA1K-3C6B -- HA1K-3C2C HA1K-3C2VC HA1K-3C6C -- HA1K-3C2D HA1K-3C2VD HA1K-3C6D -- HA1K-3C2E HA1K-3C2VE HA1K-3C6E -- HA1K-3C2G HA1K-3C2VG HA1K-3C6G -- HA1K-3C2H HA1K-3C2VH HA1K-3C6H -- HA1K-31C2B HA1K-31C2VB HA1K-31C6B -- HA1K-31C2D HA1K-31C2VD HA1K-31C6D -- HA1K-31C2G HA1K-31C2VG HA1K-31C6G -- HA1K-32C2C HA1K-32C2VC HA1K-32C6C -- HA1K-32C2D HA1K-32C2VD HA1K-32C6D -- HA1K-32C2H HA1K-32C2VH HA1K-32C6H -- HA1K-33C2D HA1K-33C2VD HA1K-33C6D -- * Two keys are supplied. * The front of key cylinder is made of black plastic. * See page 15 for dimensions. * Besides the standard key (key number 231), three other key numbers are available (2/3/5). To specify, add the key number in the part number as: HA1K-3C2A-2 Contact Operation Operator Position & Contact Operation (Top View) Positions Contact Left Center Right NO NC L L R SPDT R -- C 90 2-position Maintained Spring return from right L 45 3-position R Maintained L C R Spring return from right L C R L C Left Contact Right Contact NO NC NO NC Left Contact Right Contact NO NC NO NC DPDT -- C C NO NC C Left Contact Right Contact NO NC NO NC R Spring return Spring return from left two-way C C Left Contact Right Contact NO NC NO NC C Left Contact Right Contact NO NC NO NC DPDT C C C C C C 13 o16 H6 Series Miniature Switches & Pilot Lights HA3K Key Selector Switches Shape Keys Retained at Operator Position Round w/Square Bezel HA3K L R Contact SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT Gold A Silver L Maintained R Gold B Silver 90 2-position L C R Gold Silver L Spring return from right R B Maintained 45 3-position Spring return from right Spring return from left Spring return two-way A L B L C L D L E L G L H L B L D L G L C L D L H L D L C C C C C C C C C C C C C C R R R R R R R R R R R R R R Gold Silver Gold Silver Gold Silver Gold Silver Gold Silver Gold Silver Gold Silver Gold Silver Gold Silver Gold Silver Gold Silver Gold Silver Gold Silver Gold Silver Gold Silver Gold Silver Part No. Solder/Tab Terminal PC Board Terminal HA3K-2C1A HA3K-2C1VA HA3K-2C2A HA3K-2C2VA HA3K-2C5A -- HA3K-2C6A -- HA3K-2C1B HA3K-2C1VB HA3K-2C2B HA3K-2C2VB HA3K-2C5B -- HA3K-2C6B -- HA3K-2C1C HA3K-2C1VC HA3K-2C2C HA3K-2C2VC HA3K-2C5C -- HA3K-2C6C -- HA3K-21C1B HA3K-21C1VB HA3K-21C2B HA3K-21C2VB HA3K-21C5B -- HA3K-21C6B -- HA3K-3C2A HA3K-3C2VA HA3K-3C6A -- HA3K-3C2B HA3K-3C2VB HA3K-3C6B -- HA3K-3C2C HA3K-3C2VC HA3K-3C6C -- HA3K-3C2D HA3K-3C2VD HA3K-3C6D -- HA3K-3C2E HA3K-3C2VE HA3K-3C6E -- HA3K-3C2G HA3K-3C2VG HA3K-3C6G -- HA3K-3C2H HA3K-3C2VH HA3K-3C6H -- HA3K-31C2B HA3K-31C2VB HA3K-31C6B -- HA3K-31C2D HA3K-31C2VD HA3K-31C6D -- HA3K-31C2G HA3K-31C2VG HA3K-31C6G -- HA3K-32C2C HA3K-32C2VC HA3K-32C6C -- HA3K-32C2D HA3K-32C2VD HA3K-32C6D -- HA3K-32C2H HA3K-32C2VH HA3K-32C6H -- HA3K-33C2D HA3K-33C2VD HA3K-33C6D -- * Two keys are supplied. * The front of key cylinder is made with black plastic. * See page 15 for dimensions. * Besides the standard key (key number 231), three other key numbers are available (2/3/5). To specify, add the key number in the part number as: HA3K-3C2A-2 Contact Operation Operator Position & Contact Operation (Top View) Positions Contact Left Center Right NO NC L L R SPDT R -- C 90 2-position Maintained C Spring return from right L 45 3-position 14 R Maintained L C R Spring return from right L C R L Left Contact Right Contact NO NC NO NC Left Contact Right Contact NO NC NO NC DPDT -- C C NO NC C Left Contact Right Contact NO NC NO NC R Spring return Spring return from left two-way C C Left Contact Right Contact NO NC NO NC C Left Contact Right Contact NO NC NO NC DPDT C C C C C C H6 Series Miniature Switches & Pilot Lights o16 Dimensions Panel Thickness 0.5 to 6 Rubber Gasket Locking Ring Right Contact 6.8 1.45 6.8 1.45 LOCK T OP 0.6 Antirotation Ring Left Contact Terminal Width 2.8x0.5t LO Round C 2.6 6 1.2 6 5 5 10.5 9 5.5 PC Board Terminal Type Mounting Hole Layout Mounting Centers 13.5 12.5 36 39 24 Solder/Tab Terminal Type PC Board Drilling Layout (Bottom View) +0.2 0 (TOP) Terminal Arrangement (Bottom View) (TOP) 24 min. Note: Determine mounting centers to ensure easy operation. les ho * See Single Board Mounting on page 25 for details about PC boards. NO NO C .2 o1 C 5 5 24 min. 1 NC 6.8 1.45 NC NO C NC NO C o21 15.8 NC 1 1 K 2 17.8 o16.2 Round w/Square Bezel o2 4 R15.5 PC Board Terminal Width 0.8x0.5t * SPDT has C, NO, and NC on the right only. All dimensions in mm. 15 o16 H6 Series Miniature Switches & Pilot Lights HA1F Illuminated Selector Switches Shape Contact Material Operator Position Operating Voltage Round HA1F 5V DC 5% Gold 12V AC/DC 10% Maintained L 24V AC/DC 10% R 5V DC 5% 12V AC/DC 10% 90 2-position Silver 24V AC/DC 10% 5V DC 5% 12V AC/DC 10% Gold Spring return from right L 24V AC/DC 10% R 5V DC 5% Silver 12V AC/DC 10% 24V AC/DC 10% Gold Maintained C L 5V DC 5% 12V AC/DC 10% 24V AC/DC 10% 5V DC 5% 12V AC/DC 10% 24V AC/DC 10% 5V DC 5% 12V AC/DC 10% 24V AC/DC 10% 5V DC 5% 12V AC/DC 10% 24V AC/DC 10% 5V DC 5% 12V AC/DC 10% 24V AC/DC 10% 5V DC 5% 12V AC/DC 10% 24V AC/DC 10% 5V DC 5% 12V AC/DC 10% 24V AC/DC 10% 5V DC 5% 12V AC/DC 10% 24V AC/DC 10% R Silver Spring return from right C 45 3-position L Gold R Silver Spring return from left C L Gold R Silver Spring return two-way C L Gold R Silver * See page 18 for dimensions. Part No. Contact SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT Solder/Tab Terminal PC Board Terminal HA1F-2C11 HA1F-2C21 HA1F-2C13 HA1F-2C23 HA1F-2C14 HA1F-2C24 HA1F-2C51 HA1F-2C61 HA1F-2C53 HA1F-2C63 HA1F-2C54 HA1F-2C64 HA1F-21C11 HA1F-21C21 HA1F-21C13 HA1F-21C23 HA1F-21C14 HA1F-21C24 HA1F-21C51 HA1F-21C61 HA1F-21C53 HA1F-21C63 HA1F-21C54 HA1F-21C64 HA1F-3C21 HA1F-3C23 HA1F-3C24 HA1F-3C61 HA1F-3C63 HA1F-3C64 HA1F-31C21 HA1F-31C23 HA1F-31C24 HA1F-31C61 HA1F-31C63 HA1F-31C64 HA1F-32C21 HA1F-32C23 HA1F-32C24 HA1F-32C61 HA1F-32C63 HA1F-32C64 HA1F-33C21 HA1F-33C23 HA1F-33C24 HA1F-33C61 HA1F-33C63 HA1F-33C64 HA1F-2C11V HA1F-2C21V HA1F-2C13V HA1F-2C23V HA1F-2C14V HA1F-2C24V Color Code -- HA1F-21C11V HA1F-21C21V HA1F-21C13V HA1F-21C23V HA1F-21C14V HA1F-21C24V Specify a lens color code in place of in the Part No. -- HA1F-3C21V HA1F-3C23V HA1F-3C24V A: G: PW: R: S: Y: amber green pure white red blue yellow -- HA1F-31C21V HA1F-31C23V HA1F-31C24V -- HA1F-32C21V HA1F-32C23V HA1F-32C24V -- HA1F-33C21V HA1F-33C23V HA1F-33C24V -- * One LED lamp is installed in illuminated selector switch. Contact Operation Operator Position & Contact Operation (Top View) Positions Contact Left Center Right NO NC NO NC SPDT L 90 2-position L R Maintained -- R C Spring return from right DPDT -- C L C R L C R L C R L C C C Left Contact Right Contact NO NC NO NC R 45 3-position Left Contact Right Contact NO NC NO NC C Left Contact Right Contact NO NC NO NC DPDT Maintained 16 C Left Contact Right Contact NO NC NO NC Left Contact Right Contact NO NC NO NC Spring return from right Spring return Spring return from left two-way C C C C C C H6 Series Miniature Switches & Pilot Lights o16 HA3F Illuminated Selector Switches Shape Contact Material Operator Position Operating Voltage Round w/Square Bezel HA3F 5V DC 5% Gold 12V AC/DC 10% Maintained L 24V AC/DC 10% R 5V DC 5% 12V AC/DC 10% 90 2-position Silver 24V AC/DC 10% 5V DC 5% Gold 12V AC/DC 10% Spring return from right L 24V AC/DC 10% R 5V DC 5% Silver 12V AC/DC 10% 24V AC/DC 10% Gold Maintained C L 5V DC 5% 12V AC/DC 10% 24V AC/DC 10% 5V DC 5% 12V AC/DC 10% 24V AC/DC 10% 5V DC 5% 12V AC/DC 10% 24V AC/DC 10% 5V DC 5% 12V AC/DC 10% 24V AC/DC 10% 5V DC 5% 12V AC/DC 10% 24V AC/DC 10% 5V DC 5% 12V AC/DC 10% 24V AC/DC 10% 5V DC 5% 12V AC/DC 10% 24V AC/DC 10% 5V DC 5% 12V AC/DC 10% 24V AC/DC 10% R Silver Spring return from right C 45 3-position L Gold R Silver Spring return from left C L Gold R Silver Spring return two-way C L Gold R Silver * See page 18 for dimensions. Part No. Contact SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT Solder/Tab Terminal PC Board Terminal HA3F-2C11 HA3F-2C21 HA3F-2C13 HA3F-2C23 HA3F-2C14 HA3F-2C24 HA3F-2C51 HA3F-2C61 HA3F-2C53 HA3F-2C63 HA3F-2C54 HA3F-2C64 HA3F-21C11 HA3F-21C21 HA3F-21C13 HA3F-21C23 HA3F-21C14 HA3F-21C24 HA3F-21C51 HA3F-21C61 HA3F-21C53 HA3F-21C63 HA3F-21C54 HA3F-21C64 HA3F-3C21 HA3F-3C23 HA3F-3C24 HA3F-3C61 HA3F-3C63 HA3F-3C64 HA3F-31C21 HA3F-31C23 HA3F-31C24 HA3F-31C61 HA3F-31C63 HA3F-31C64 HA3F-32C21 HA3F-32C23 HA3F-32C24 HA3F-32C61 HA3F-32C63 HA3F-32C64 HA3F-33C21 HA3F-33C23 HA3F-33C24 HA3F-33C61 HA3F-33C63 HA3F-33C64 HA3F-2C11V HA3F-2C21V HA3F-2C13V HA3F-2C23V HA3F-2C14V HA3F-2C24V Color Code -- HA3F-21C11V HA3F-21C21V HA3F-21C13V HA3F-21C23V HA3F-21C14V HA3F-21C24V Specify a lens color code in place of in the Part No. -- HA3F-3C21V HA3F-3C23V HA3F-3C24V -- A: G: PW: R: S: Y: amber green pure white red blue yellow HA3F-31C21V HA3F-31C23V HA3F-31C24V -- HA3F-32C21V HA3F-32C23V HA3F-32C24V -- HA3F-33C21V HA3F-33C23V HA3F-33C24V -- * One LED lamp is installed in illuminated selector switch. Contact Operation Operator Position & Contact Operation (Top View) Positions Contact Left Center Right NO NC NO NC SPDT L 90 2-position L R Maintained -- R C Spring return from right DPDT -- C L C R L C R L C R L C Left Contact Right Contact NO NC NO NC Left Contact Right Contact NO NC NO NC C Left Contact Right Contact NO NC NO NC R 45 3-position C C Left Contact Right Contact NO NC NO NC C Left Contact Right Contact NO NC NO NC DPDT Maintained Spring return from right Spring return Spring return from left two-way C C C C C C 17 o16 H6 Series Miniature Switches & Pilot Lights Dimensions Panel Tshickness 0.5 to 6 Rubber Gasket Locking Ring 6.4 6.4 Right Contact LOCK 6.8 1.45 6.8 1.45 T OP Antirotation Ring Left Contact Antirotation Riing 2.8x0.5t Round w/Square Bezel Round 2.6 6 1.2 6 5 2 o16.2 13.5 11 36 19.5 o24 24 Solder/Tab Terminal Type PC Board Drilling Layout (Bottom View) Terminal Arrangement (Bottom View) (TOP) (TOP) +0.2 0 6.4 6.8 1.45 24 min. Note: Determine mounting centers to ensure easy operation. * See Single Board Mounting on page 25 for details about PC boards. NO NO C .2 o1 Lamp Terminal (-) X2 les ho C X2 5 24 min. 5 1 Lamp Termina l (+) NC PC Board Terminal Type Mounting Hole Layout Mounting Centers 10.5 9 5.5 NC 17.8 X1 NO C 5 NC NC NO C X2 X2 o21 15.8 X1 1 1 K C LO R15.5 PC Board Terminal Width 0.8x0.5t 0.6 * SPDT has C, NO, and NC on the right only. * X2 and X2 are wired internally. All dimensions in mm. 18 H6 Series Miniature Switches & Pilot Lights o16 HA1R Selector Pushbuttons Contact Operation Operator Position Shape L C Normal Push R Normal Push Normal 90 2-position C C Left Right Left Right Contact Contact Contact Contact NO NC NO NC NO NC NO NC -- C C C C C 45 3-position Maintained C -- Contact Gold DPDT Silver DPDT Part No. Terminal Style Color Code Push Round HA1R Left Right Left Right Contact Contact Contact Contact NO NC NO NC NO NC NO NC Contact Material Solder Tab Terminal HA1R-2C2 PC Board Terminal HA1R-2C2V Solder Tab Terminal HA1R-2C6 B: G: R: Solder Tab Terminal S: HA1R-3C2 Y: PC Board Terminal HA1R-3C2V -- Left Right Left Right Left Right Contact Contact Contact Contact Contact Contact NO NC NO NC NO NC NO NC NO NC NO NC C C C C C Left Right Left Right Contact Contact Contact Contact NO NC NO NC NO NC NO NC Blocked C C C C C Gold DPDT Silver DPDT black green red blue yellow Solder Tab Terminal HA1R-3C6 -- * Specify a button color code in place of in the Part No. Dimensions Panel Thickness 0.5 to 6 Rubber Gasket Locking Ring Right Contact LOCK 6.8 1.45 6.8 1.45 T OP Anti-rotation Ring Left Contact Terminal Width 2.8x0.5t 2.6 K C LO R15.5 PC Board Terminal Width 0.8x0.5t 0.6 R1 5 o2 6 1.2 PC Board Terminal Type Mounting Hole Layout Mounting Centers 13.5 36 (TOP) +0.2 0 20 Solder/Tab Terminal Type PC Board Panel Cut-out (Bottom View) Terminal Arrangement (Bottom View) (TOP) 6.8 1.45 Note: Determine mounting centers to ensure easy operation. .2 o1 les ho NO NO C 35 min. C 5 5 1 35 min. o16.2 10.5 9 NC 2 5.5 NC 17.8 5 NO C 5 6 NC NO C o21 15.8 NC 1 1 4 * See Single Board Mounting on page 25 for details about PC boards. All dimensions in mm. 19 o16 H6 Series Miniature Switches & Pilot Lights Accessories Shape Material Part No. Ordering Part No. Package Quantity Locking Ring Wrench Metal (nickel-plated brass) o18 60 MT-001 MT-001 1 Lamp Holder Tool 60 o6.6 Rubber (nitryl) Remarks * Used to tighten the locking ring when installing H6 into a panel. * Tighten the locking ring to a torque of 0.88 N*m. * Used to install and remove LED lamps. OR-44 OR-44 1 o7.5 * Used to remove the lens or buttons. Lens Removal Tool Stainless Steel MT-101 MT-101 1 60 Switch Guard Standard (180 spring return) Terminal Cover HA9Z-K1 1 Spring Return For single board (see page 25) HA9Z-K1 Guard (Polyarylate) Base (polyacetal) * Degree of protection: IP65 * Used to protect flush pushbuttons from inadvertent operation. HA9Z-KW1 HA9Z-KW1 1 Standard H6VL2PN10 10 17.6 H6-VL2 * Terminal cover is not attached and must be ordered separately. * When wiring the terminals, insert the lead wires into the terminal cover holes before soldering. TOP marking H6-VL2 Nylon (white) 4 15 21 H6-PVL H6-PVL H6PVLPN10 10 16.3 Exclusive for Unibody Pilot Light 14 18.2 * Degree of protection: IP65 AL-B6PN05 5 Metal 2 + 0 0 .2 * Degree of protection: IP65 * Tightening torque: 0.1 to 0.29 N*m 12 AL-BM6 1 Gasket Mounting Hole Locking Ring Panel Thickness 0.5 to 6 20 6. AL-BM6 2 + 0 0 .2 2.5 o1 Plug: Metal (diecast) Locking ring: plastic Gasket: nitryl Mounting Hole o18 AL-B6 6 6. 2 o16.5 Nitryl Rubber (black) o1 Rubber o17.8 Mounting Hole Plug H6 Series Miniature Switches & Pilot Lights o16 Maintenance Parts Shape Lens Specification Round, Round w/Square Bezel Square Part No. Ordering Part No. HA9Z-L11 HA9Z-L11PN05 HA9Z-L21 HA9Z-L21PN05 Package Quantity Specify a color code in place of in the Part No. A (amber), C (clear), G (green), R (red), S (blue), Y (yellow) Note: Use C (clear) lens for PW (pure white) illumination. Polyarylate o30mm Lens HA9Z-L13 HA9Z-L13PN05 5 Button Marking Plate Round Flush, Round w/Square Bezel HA9Z-B11 HA9Z-B11PN05 Square Flush HA9Z-B21 HA9Z-B21PN05 HA9Z-B12 HA9Z-B12PN05 Square Extended HA9Z-B22 HA9Z-B22PN05 o30mm Button HA9Z-B13 HA9Z-B13PN05 Selector Pushbutton HA1A-R1 HA1A-R1PN02 Round, Round w/Square Bezel White HA9Z-P1W HA9Z-P1WPN05 Black HA9Z-P1B HA9Z-P1BPN05 White HA9Z-P2W HA9Z-P2WPN05 Black HA9Z-P2B HA9Z-P2BPN05 Acrylic Specify a color code in place of in the Part No. A (amber), G (green), R (red), S (blue), W (white), Y (yellow) Note: Use W (white) lens for PW (pure white) illumination. Specify a color code in place of in the Part No. Round Extended, Round Extended Polyacetal w/Square Bezel Square Remarks B (black), G (green), R (red), S (blue), W (white), Y (yellow) 2 B (black), G (green), R (red), S (blue), Y (yellow) 5 * HA9Z-P1W (engraving area: o16.4 mm, engraving depth: 0.5 mm max.) * HA9Z-P2W (engraving area: 16.4 mm, engraving depth: 0.5 mm max.) Locking Ring For all types Polyacetal HA9Z-LN HA9Z-LNPN10 For all types except for HA1E Stainless Steel HA9Z-LP HA9Z-LPPN10 For all types except for collec Polyacetal tive mounting and HA1E HA9Z-LS HA9Z-LSPN10 For selector switch HA9Z-HC1 HA9Z-HC1PN05 10 Anti-rotation Ring Lever Lock Selector Color Insert 5 * Lever lock is not attached and must be ordered separately. * Yellow Specify a color code in place of Polyacetal in the Part No. G (green), R (red), S (blue), W (white), Y (yellow) Spare Key For key selector switches Nickel-plated Brass KG9Z-SK-231 KG9Z-SK-231PN02 2 Illuminated Selector Knob * Thickness: 2.0mm * Besides the standard key number (231), three other numbers (2, 3, 5) are avail able. Ordering part number: KG9Z-SK-2PN02 KG9Z-SK-3PN02 KG9Z-SK-5PN02 Specify a color code in place of in the Part No. For illuminated selector switch Polyarylate (w/water HA1A-F proof gasket) HA1A-F 1 A (amber), G (green), R (red), S (blue), W (white), Y (yellow) Note: Use W (white) knob for PW (pure white) illumination. 21 o16 H6 Series Miniature Switches & Pilot Lights LED Lamps Current Draw Rated Voltage Dimension 5V DC o6.2 14.5 6V AC/DC AC 8 mA (except S) 7m (S) -- 7 mA (except S) 6m (S) 9 mA (A, R, S, W) 10 mA (G, PW) Illumination Color Code Specify a color code in place LFTD-5PN10 of in the Ordering Part No. LFTD-6 A: amber LFTD-6PN10 G: green PW: pure white R: red LFTD-1 S: blue W: white LFTD-1PN10 LFTD-5 LFTD-5 8 mA (except S) 7m (S) 9 mA (except S) 8m (S) 8 mA (except S) 24V AC/DC 7m (S) 9 mA (except S) 8m (S) 12V AC/DC Ordering Part No. Part No. DC LFTD-6 LFTD-1 Use a PW (pure white) LED lamp for yellow LFTD-2PN10 illumination. LFTD-2 LFTD-2 Package Quantity Base 1 10 1 10 SX6S/8x5.4 1 10 1 10 Transformer Transformer For 24V Rated Voltage Operating Voltage Range Part No. 100/110V AC 100/110V AC 10% TWR512 200/220V AC 200/220V AC 10% TWR522 400/440V AC 400/440V AC 10% TWR542 * Terminal covers are supplied with separate mounting type transformers. * Connect only one LFTD LED to separate mounting type transformers. 100/110V AC, 200/220V AC, 400/440V AC (50/60 Hz) 2.4VA 600V 100 M minimum (500V DC megger) 2500V AC, 1 minute Power Consumption Rated Insulation Voltage Insulation Resistance Dielectric Strength Operating -30 to +60C (no freezing) Standard Temperature Operating Condition Relative Humidity 35 to 85% (no condensation) Secondary Side Mounting Holes 2-o3.3 Primary Side 40 48 52 5 to 55 Hz, amplitude 0.5 mm Terminal Cover 1,000 m/s2 (100G) M3.5 2 mm2 maximum, 2 wires maximum 40 41 Operating Extremes Damage Limits 22 30 M3.5 Terminal Screws Rated Voltage Shock Resistance Terminal Screw Applicable Wire LFTD-2 Dimensions Specifications Vibration Resistance Applicable LED Lamp All dimensions in mm. Accessories Description Appearance DIN Rail 45 9.5 22 Part No. Ordering Part No. Aluminum Weight: Approx. 200g BAA1000 BAA1000PN10 Steel Weight: Approx. 320g BAP1000 BAP1000PN10 Steel Weight: Approx.15g BNL6 BNL6PN10 Plastic Weight: Approx.15g BC9Z-E/NS35N BC9Z-E/NS35NPN10 9 48.6 32.8 End Clip Description Package Quantity 10 H6 Series Miniature Switches & Pilot Lights o16 Dimensions Terminal Cover For W/removable Contact Block (H6-VL2) For Unibody (H6-PVL) 47 o16.3 39.5 14 15 18.2 Switch Guard For Flush Pushbuttons and Illuminated Pushbuttons (HA9ZK1) 41 R2 7. Panel thickness 0.5 to 5 15 (HA9ZKW1) 39.5 R2 0.4 7. Panel thickness 0.5 to 6 4 41.2 57 minimum 29 4 41.2 25 minimum 24 13.9 All dimensions in mm. 23 o16 H6 Series Miniature Switches & Pilot Lights Safety Precautions * Turn off the power to H6 series before installation, removal, wiring, maintenance, and inspection of the units. Failure to turn power off may cause electrical shocks or fire hazard. * To avoid burning your hand, use the lamp holder tool when replacing lamps. * For wiring, use wires of a proper gauge to meet voltage and current requirements. Improper soldering may cause overheating and create a fire hazard. Instructions Replacement of Lens and Marking Plate 2. Push the bulb, and remove from the rear of the lamp holder. Removing the Lens Assembly Remove the lens assembly (color lens, marking plate, and lens holder) by inserting a screwdriver into the recess of the lens thorough the bezel. Installing the Lamp 1. Insert the lamp into the lamp holder from the rear, and push in completely using the smaller end of the lamp holder tool. Removing the Marking Plate Remove the marking plate by pushing the lens from the rear to disengage the latches between the lens and the lens holder, using the screwdriver as shown below. LED lamp OR-44 Lamp Holder Note: The translucent filter in the lens holder cannot be removed because this filter is sealed to make the unit waterproof. 2. Hold the bulb with the lamp holder tool as shown below. Smaller end Installing For round lens types, place the marking plate on the lens holder with the projection engaged and press the lens onto the lens holder to engage the latches. For square lens types, insert the marking plate into the lens, and press the lens onto the holder to engage the latches. Note: Make sure of correct orientation of the marking plate. [Round Lens Type] Smaller end [Square Lens Type] 3. Place the insertion guide of the lamp holder and the TOP marking side or the groove in the operator unit in the same direction. Insert the lamp holder into the housing with the lamp holder tool. Then push the lamp lightly and turn it clockwise to install. TOP marking Plastic Part Grooves of operating axis (one each on top and bottom) Panel Mounting Remove the contact block from the operator. Insert the operator into the panel cut-out from the front, then install the contact block to the operator. Removing the Contact Block Lens Marking Plate Lens Holder Lens Marking Plate Lens Holder Replacement of Lamps Lamps can be replaced using the lamp holder tool (OR-44) from the front of the panel, or by removing the contact block from the operator. Removing the Lamp 1. Slip the lamp holder tool onto the lamp head. Then push slightly, and turn the lamp holder tool counterclockwise. Turn the locking lever on the contact block in the direction opposite to the arrow on the housing. Then the contact block can be removed. Installing the Contact Block Insert the contact block with the TOP markings on the contact block and the operator placed in the same direction. Then lock the units, turning the locking lever in the direction of the arrow. Notes for Mounting Use the optional Ring Wrench (MT-001) to mount the operator onto a panel. Tightening torque should not exceed 0.88 N*m. Do not use pliers. Do not tighten with excessive force, otherwise the locking ring will be damaged. Collective Mounting 9.3 As the locking lever can be turned easily from the rear of the units using a screwdriver, the contact blocks can be removed even when mounted collectively. 9.3 24 H6 Series Miniature Switches & Pilot Lights o16 Connection Instructions Positive-lock connector and easy-lock connector are applicable to tab terminals. Recommended Connectors Marking Plates and Films For H6 series illuminated pushbuttons and pilot lights, legends and symbols can be engraved on marking plates, or printed mylar film can be inserted under the lens for labelling purposes. Marking Plate and Marking Film Size Round Lens (round, round w/square bezel) 0.85 mm Built-in Marking Plate 0.2 to 0.5 mm2 Terminal 0.2 to 1.25 mm 2 Housing Square Lens Engraving Area Engraving Area 16.4 mm 16.4 mm 0.85 mm o16.8 mm Lens Positive-lock Connector (Tyco Electronics) Item Easy-lock Connector (Nichifu Co., Ltd.) 175412-1 0.2 to 0.3 mm2 174778-1 0.5 to 1.25 mm2 OSS-62815F3 174779-1 OSS-62852F3 NET1-28-1P Note: Positive-lock is a registered trademark of Tyco Electronics. Single Board Mounting 8 Units 16.4 mm Lens Film Marking Lens Holder Plate Wiring 1. Solder the terminals at 350C within 3 seconds using a 60W soldering iron. Sn-Ag-Cu type is recommended when using lead-free solder. When soldering, do not touch the H6 with the soldering iron. Also ensure that no tensile force is applied to the terminal. Do not bend the terminal or apply excessive force to the terminal. 2. Use non-corrosive liquid flux. Notes on Terminal Cover Insert the terminal cover into the contact block with the TOP markings on the contact block and the terminal cover in the same direction. Note: When wiring, insert the lead wires into the terminal cover holes before soldering. TOP Marking Side 6.4 0.05 (0.5) (0.5) (0.5) Lamp Terminal (+) COM Terminal Lamp Terminal (+) 2 1. 9- NC Terminal NO Terminal Lamp Terminal (-) .1 +0 0 1.6 (PC Board) 6.80.05 2.8 TOP marking * Use 1.6-mm-thick glass epoxy PC board with drilled holes. * Design a circuit so that the H6 series can operate within the rated voltage and current range. Make sure that inrush current and voltage do not exceed the rating. * Minimum applicable load is 5V AC/DC,1 mA on gold contacts. Applicable range is subject to the operating condition and load. * Since the 2.8-mm-wide terminal touches the PC board as shown on the right, short circuit may occur with pattern lines. Design a circuit carefully to prevent short circuit. 2.8 Switch Note:Film is not supplied. Make sure of correct orientation of the marking plate. [Square Lens Type] Notes for Designing PC board and Circuit 2.8 Note: Film is not supplied. 2.4 Switch 2.4 Marking Lens Holder Plate (0.8) Film (0.8) (0.8) TOP marking * Reduced installation labor, easy wiring, space saving, and stan dardization. * Since the contact blocks on the PC board can be removed easily using a locking lever, the H6 series is easy to maintain. * Because the H6 series requires no studs for fastening the unit to a PC board, special preparation of the control panel is not needed. SW Ternubak 1C [Round Lens Type] Features Lamp Terminal Insertion Order of Marking Plate and Film Mounting the PC board terminal type units on a PC board offers the following features. SW Ternubak 2C * Two 0.1mm-thick films or one 0.2mm-thick film can be installed in the lens. * Marking film is not included. * Recommended marking film: Polyester film Lens 12 Units 5.0 5.0 Applicable Marking Film 18.4 mm o18.4 mm *Engraving must be made on the engraving area within 0.5mm deep. *The marking plate is made of white acrylic resin. Soldering Side Mounting Side TOP Marking Side Terminal Cover 25 o16 H6 Series Miniature Switches & Pilot Lights Switchguard for Single Board Mounting PC Board Drilling Layout .2 o1 9 10.7 (N le ho d ion ir lle rat d pe o6 r o fo ot e 10.7 Part No. HA9Z-KW1 (Note 1) 5 5 2) Note 1: When designing, note the alignment of centerlines of the contact blocks and centerlines of the operators. Note 2: The diameter of the terminal hole is 1.2 mm. See page 23 for dimensions. 1 1.45 (Note 1) 6.4 6.8 Installation and Removal of Contact Blocks Turn the locking lever to install and remove the contact block on the PC board by using a screwdriver from a hole (o6 mm) of the PC board. o6-mm-hole for installation and removal Hole diameter may vary to meet installation requirements. When the locking lever can be turned by using a screwdriver from the upper or right space, the holes are not necessary. <Example> Upper Space Right Space Mounting Holes and Assembly Procedure o16.0 +0.1 0 24 min. o16.0 +0.1 0 14.8 +_ 0.05 * Drill mounting holes in the panel as shown below. When the units are mounted collectively, provide adequate clearance. 1.9 +_ 0.05 24 min. (o30 mushroom: 35mm minimum) (panel cut-out for positioning) * Assembly Procedure 1. Install the operator to the operation panel. 2. Insert the contact block to the operator from the rear. 3. Turn the lock lever to lock the contact block. 4. Insert the PC board to terminals and solder. Note 1: Make sure that each terminal is inserted into the PC board correctly. Note 2: Do not apply tensile force to the connector cable for extended period of time. Note 3: Do not expose the contact block to water. Note 4: Ensure to lock contact blocks when the contact blocks are installed on the operators. 26 Note: H6 series with or without switchguard can be used on a single board, as the depth behind the panel to the PC board is the same. www.idec.com Head Office 6-64, Nishi-Miyahara-2-Chome, Yodogawa-ku, Osaka 532-0004, Japan USA Germany Singapore Thailand Australia Taiwan IDEC Corporation APEM GmbH IDEC Izumi Asia Pte. Ltd. IDEC Asia (Thailand) Co., Ltd IDEC Australia Pty. Ltd. IDEC Taiwan Corporation Tel: +1-408-747-0550 Tel: +49-40-25 30 54 - 0 Tel: +65-6746-1155 Tel: +66-2-392-9765 Tel: +61-3-8523-5900 Tel: +886-2-2698-3929 opencontact@idec.com service@eu.idec.com info@sg.idec.com sales@th.idec.com sales@au.idec.com service@tw.idec.com Specifications and other descriptions in this brochure are subject to change without notice. Information in this catalog is current as of April, 2019. 2019 IDEC Corporation, All Rights Reserved. EP1593-6 Hong Kong China/Shanghai China/Shenzhen China/Beijing Japan IDEC Izumi (H.K.) Co., Ltd. IDEC (Shanghai) Corporation IDEC (Shenzhen) Corporation IDEC (Beijing) Corporation IDEC Corporation Tel: +852-2803-8989 Tel: +86-21-6135-1515 Tel: +86-755-8356-2977 Tel: +86-10-6581-6131 Tel: +81-6-6398-2527 info@hk.idec.com idec@cn.idec.com idec@cn.idec.com idec@cn.idec.com marketing@idec.co.jp