4.7 (.185) Features 4.4 +0.25/-0.05 (.173 +.010/-.002) 2.8 (.110) Miniature Thermal Cutoff (TCO) device Surface mount, smallest body size Overtemperature and overcurrent protection Controls abnormal, excessive current virtually instantaneously, up to rated limits n Wide range of temperature options n High corrosion resistance n Two height options: low profile & high force withstand n n n n 00 4134N SC 77A 0.125 R (.005) 1.07 0.05 SCxxAAA (.042 .002) 0.94 0.05 SCxxAAB (.037 .002) Applications n Battery cell protection for: - Notebook PCs - Tablet PCs - Smart phones n Overtemperature protection for: - USB Type C cables (e.g. smart phone cables, notebook AC adapters) - Electronic cigarettes - Medical heaters*** SC Series Breaker (Surface Mount Thermal Cutoff Device) Ratings Specification 1.71 (.067) 0.5 Trip Temperature 4 PLCS. (.020) Reset Temperature ARM TERMINALS Contact Rating Maximum Breaking Current Maximum Voltage 1.54 Minimum Holding Voltage (.061) Maximum Leakage Current Resistance 1.71 (.067) 0.08 (.003) SC72AAA, 4 PLCS. SC72AAB 72 C 5 C SC77AAA, SC77AAB 77 C 5 C A-TYPE SC82AAA, SC82AAB 82 C 5 C 40 C min. DC9 V / 25 A, 6000 cycles DC5 V / 50 A, 100 cycles DC28 V / 25 A, 100 cycles 3 V @ 25 C for 1 minute 200 mA max. @ 25 C 5 milliohms max. BASE TERMINALS 1.49 (.059) SC85AAA, SC85AAB 85 C 5 C Mini-breaker TCOs reset when the following conditions are met: *ARM The ambient temperature has dropped by 10 C below theBASE minimum trip temperature; and TERMINALS *TERMINALS Power to the TCO has been cycled (off/on) Agency Recognition 2.3 (.091) UL, cUL TUV 0.7 (.028) 0.7 (.028) How to Order Description File Number: E215638 (UL 60730) File Number:3.42 R 50411018 0001~0002 (.135) (EN 60730 2-9-2010) Series Designator Trip Temperature (5 C) * 72 * 77 * 82 * 85 Arm Material A = Cu Alloy, High current type Product Structure Body Material A = PPS ARM COVER PLATE COVER ARM TERMINAL SC 77 A A B BASE TERMINAL PTC BIMETAL DISC Body Thickness A = 1.07 0.05 mm B = 0.94 0.05 mm Circuit Diagram NORMAL CIRCUIT CIRCUIT AFTER OPENING CONTACT BASE * Model SCxAAB is the low profile 0.94 mm height version. * Model SCxAAA is designed with a reinforced cover to withstand higher forces during the USB cable manufacturing injection molding process. WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. ** Bourns considers a product to be "halogen free" if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. *** Excluding life-saving, life-critical or life-sustaining applications. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SC Series Breaker (Surface Mount Thermal Cutoff Device) Product Dimensions 4.7 (.185) 4.4 +0.25/-0.05 (.173 +.010/-.002) 2.8 (.110) 0.125 R (.005) 1.07 0.05 SCxxAAA (.042 .002) 0.94 0.05 SCxxAAB (.037 .002) 1.71 (.067) 4 PLCS. ARM TERMINALS DIMENSIONS: 0.08 (.003) 4 PLCS. 1.71 (.067) 0.5 (.020) BASE TERMINALS 1.54 (.061) 1.49 (.059) BASE TERMINALS ARM TERMINALS Current (A) Typical Performance 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 MM (INCHES) 2.3 (.091) Current vs. Temperature Curves A-Type 0.7 (.028) 3.42 (.135) SC72A (Low 67 C avg.) SC77A (Low 72 C avg.) SC82A (Low 77 C avg.) SC85A (Low 80 C avg.) 0.7 (.028) ARM COVER PLATE 20 COVER 30 40 BASE 60TERMINAL70 50 80 Temperature (C) BIMETAL Specifications are subject to change without notice. DISC CONTACT Users should verify actual device performance in their specificARM applications. TERMINAL PTCforth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. The products described herein and this document are subject to specific legal disclaimers as set BASE 4.7 (.185) 4.4 +0.25/-0.05 (.173 +.010/-.002) SC Series Breaker (Surface Mount Thermal Cutoff Device) 2.8 (.110) Surface Mount Recommendations The Model SC Series breaker is designed for reflow and hand soldering. It is not designed or warranted for flow soldering. The following conditions must be adhered to: 1.71 (.067) Temperature (C) Process breaker in a reflow furnace using the profile shown above three times,1.71 followed by positioning the breaker(.067) in 0.5 4 PLCS. of +25 C for 8 hours. ambient temperature (.020) ARM TERMINALS Recommended Reflow Profile 0.125 R (.005) Reflow Soldering: 1.07 0.05 SCxxAAA The recommended reflow (.042 soldering .002) conditions are as follows: 0.94 0.05 SCxxAAB (.037 .002)seconds 150 ~ 180 C................ 100 ~ 150 220 C........................ 20 ~ 40 seconds 255 ~ 260 C................ 5 ~ 10 seconds 270 240 210 180 150 120 0.08 (.003) 90 4 PLCS. 60 30 0 TEMPERATURE _ TIME 150 ~ 180 C ..... 100 ~ 150 Seconds 220 C ..... 20 ~ 40 Seconds 245 C ..... Peak BASE TERMINALS 0 60 120 180 240 300 360 Time (Seconds) 1.49 Do not (.059) 1.54 (.061) expose the breaker to temperatures exceeding +260 C. Recommended Land Pattern BASE TERMINALS ARM TERMINALS Recommended Mask Thickness: 0.12 mm / (.005 in.) 2.3 (.091) Recommended Solder Particle Size: 30 m DIMENSIONS: 0.7 (.028) 3.42 (.135) MM (INCHES) 0.7 (.028) Mounting Cautions ARM In order to protect theCOVER housing and mechanical parts inside from deformation, prevent excessive load at the time of part absorption / part PLATE deployment and mounting. A part absorption nozzle more than 2 mm in diameter with a 3 N (5 N max.) mounting load is recommended. Any COVER BASE shock to the product by the nozzle during the mounting procedure TERMINALmay have a negative impact on the function of the breaker. ARM TERMINAL PTC BIMETAL DISC CONTACT BASE Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SC Series Breaker (Surface Mount Thermal Cutoff Device) Standard Packaging Specifications Reel (13 inch)...................................................................................................................................................................5,000 pcs. (fixed) Outer Box (690 mm x 344 mm x 136 mm).....................................................................................................................50,000 pcs. (fixed) Marking...........................................A label will be attached on the reel and outer box which includes the following items, at a minimum: Part name, part number, quantity, lot number, safety approval mark (UL, etc.), company name (Bourns KK) and any other items required by the customer REEL 2.0 (.079) 10.0 DIA. (.394) 2.8 (.110) 2.0 (.079) 90.0 DIA. (3.543) 330.0 2.0 (12.992 .079) DIA. 80.0 1.0 (3.150 .039) DIA. 0.2 0.4 0.6 0.8 13.0 0.2 (.512 .008) 5.0 R (.197) 13.0 0.2 DIA. (.512 .008) 2.0 0.5 (.079 .020) 21.0 0.8 DIA. (.827 .031) 35 CENTER HOLE ENLARGEMENT DIMENSIONS: MM (INCHES) TOLERANCES: 0.1 (.004) 5.5 (.217) 2.00 (.079) 8.00 (.315) 13.5 1.0 (.531 .039) 17.5 1.0 (.689 .039) UNLESS OTHERWISE NOTED CARRIER TAPE DIA. 1.50 +0.1/-0 (.059 +.004/-.000) 1.0 R (.039) 4.00 (.157) 1.5 +0.2/-0.1 (.059 +.008/-.004) 1.75 (.069) 5.05 (.199) 12.00 +0.2/-0.1 (.472 +.008/-.004) 3.15 (.124) 0.3 0.05 (.012 .002) 1.2 +0.2/-0.1 (.047 +.008/-.004) NOTES: 1) The corner and ridge radiuses (R) of inside cavity are 0.3 mm / (.012 in.) max. 2) Cumulative tolerance of 10 pitches of the sprocket hole is 0.2 mm / (.008 in.). 3) Measuring of cavity positioning is based on cavity center in accordance with JIS/IEC standard. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SC Series Breaker (Surface Mount Thermal Cutoff Device) Typical Part Marking 9018N DATE CODE: MONTH (1~9, X, Y, Z) DATE YEAR MACHINE NO. ROMAN NUMERAL (I, II, III, ETC.) or ARABIC NUMERAL (1, 2, 3, ETC.) = OKAYAMA FACTORY ALPHABET = SHIGA FACTORY ** SC **AAB SERIES DESIGNATOR THICKNESS (A = 1.07 0.05 mm; B = 0.94 0.05 mm) MANUFACTURER'S INTERNAL CODE (ALPHANUMERIC CHARACTER) RESIN TYPE (A = PPS) ARM MATERIAL (A = Cu ALLOY HIGH CURRENT TYPE) TRIP TEMPERATURE - C (72, 77, 82, 85) Application Temperature Range ........................................... -30 ~ 100 C Environmental Specifications Moisture Sensitivity Level..................... 1 ESD Classification (HBM).................... 6 Storage Conditions 1) T . he breaker must be stored in the standard packaging with the following conditions: ambient temperature of -10 to +40 C, RH <75 % with no radical temperature change, direct sunshine, excessive vibration or shock. 2) A . void storage locations where there is a possibility of generating corrosive gas .such as from salt breeze, chlorine, hydrogen sulfide, ammonium, sulfide-oxidation, hydrogen chloride, acetate, etc. 3) Storage period should be no longer than 24 months from date of shipment. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SC Series Breaker (Surface Mount Thermal Cutoff Device) Caution when using Breaker Before using the breaker, please fully read the DESIGN AND HANDLING CAUTIONS stated below to avoid breaker performance deterioration and/or damage to the breaker body or terminal. DESIGN CAUTIONS 1. Use within the electrical ratings specified in this data sheet. If used over the rating of voltage or current, ON-OFF life might be impacted and contact may deteriorate due to breaker arm damage. 2. If used over the maximum electrical rating specified in this data sheet, the circuit may not open safely or operate properly. Please test your device for any abnormalities and confirm that the breaker will open the circuit safely in your device. Any use over the maximum electrical rating is at the sole risk of the user. 3. Mount the breaker on your device where heat is the highest in order to transfer it effectively to the breaker. 4. If the breaker is affixed with an adhesive (resin, etc.), before proceeding, fully test, evaluate and verify that the adhesive presents no negative effects on the breaker before proceeding. 5. After the breaker is mounted, affix it so that the breaker body and terminals will not move. If not affixed properly, breaker resistance could increase or contact could open due to stress during handling or vibration/shock during transportation. 6. If breaker is to be resin-molded, test and evaluate the application to determine whether the breaker can be used effectively. 7. The breaker cannot be used as a repetitive ON-OFF thermostat. 8. The breaker is not washable. Do not wash. 9. Do not let a solder iron touch the breaker body. 10. Do not attach solder to the breaker body. 11. When mounting and after mounting the breaker, do not apply supersonic vibration. Vibration and heat may cause breaker resistance to increase or may cause body damage. If you plan to apply supersonic vibration after mounting the breaker, you will need to evaluate whether the breaker is suitable for your specific application. The breaker is not designed or warranted to withstand supersonic vibration. 12. Do not use the breaker in the following environments: a) Water, oil, chemical or organic solutions b) Direct sunlight, outdoor exposure, dust c) Dew condensation, where the breaker could get wet d) Salt breeze, chlorine, hydrogen sulfide, ammonium, sulfide-oxidation, hydrogen chloride, acetate and anywhere there is a possibility of generating corrosive gas such as sulfurous acid gas e) Strong static electric charge or electromagnetic wave 13. The breaker is not designed or tested for, and should not be used in, aerospace, airplane, nuclear, military, life-saving, life-critical or life-sustaining medical and other related applications where failure or malfunction may result in personal injury, death or severe property or environmental damage. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SC Series Breaker (Surface Mount Thermal Cutoff Device) Caution when using Breaker (Continued) HANDLING CAUTIONS 1. Since the breaker body is composed of plastic parts, do not clamp or dent with tools as this could cause a resistance increase or body damage. 2. Breaker terminals are thin copper-alloy with right angle edges. Handle carefully to avoid injury to fingers. Handling while wearing finger cots and using tweezers is recommended. 3. When mounting the breaker on a cell or PCM board, be careful to avoid placing excessive stress on the breaker body and terminals. Excessive stress may cause a resistance increase or body damage. Please refer to the following cautions: a) Do not apply more than 5 N (AAB) or 10 N (AAA) moment to the breaker body (refer to Figure 1) b) Do not apply more than 1.5 cN-m (AAB) or 3 cN-m (AAA) twist torque to the breaker body (refer to Figure 2) c) Do not apply more than 15 N (AAB) or 30 N (AAA) bending force to the breaker body (refer to Figure 3) Figure 1 Figure 2 Figure 3 Due to possible updates to safety standards and other reasons, there may be changes in specifications for this data sheet without prior notification. Therefore, before design-in for your application, please contact us for the most up-to-date specifications. Asia-Pacific: Tel: +886-2 2562-4117 Email: asiacus@bourns.com Europe: Tel: +36 88 520 390 Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 Email: americus@bourns.com www.bourns.com 12/18 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns(R) products manufactured by or on behalf of Bourns, Inc. and (32 ?+( 3$2".++$"3(5$+8:.41-2; Unless otherwise expressly indicated in writing, Bourns(R) products and data sheets relating thereto are subject to change 6(3'.43-.3("$2$122'.4+#"'$"*%.1 -#.!3 (-3'$+ 3$231$+$5 -3(-%.1, 3(.- -#5$1(%83' 324"'(-%.1, 3(.-(2"411$-3 and complete before placing orders for Bourns(R) products. The characteristics and parameters of a Bourns(R) product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns' knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns(R)/1.#4"3(- 42$1 //+(" 3(.-, 85 18 %1.,3'$# 3 2'$$3"' 1 "3$1(23("2 -#/ 1 ,$3$12#4$3.(3'$".,!(- 3(.-.%3'$.41-2(R) product with other components (-3'$42$1<2 //+(" 3(.-.1((3'$$-5(1.-,$-3.%3'$42$1 //+(" 3(.-(32$+%'$"' 1 "3$1(23("2 -#/ 1 ,$3$12.% .41-2(R) /1.#4"3 +2." - -##.5 18(-#(>$1$-3 //+(" 3(.-2 -# "34 +/$1%.1, -"$, 85 18.5$13(,$2$122'.4+# +6 825$1(%8 the actual performance of the Bourns(R)/1.#4"3(-3'$(12/$"(="#$5("$2 -# //+(" 3(.-2 -#, *$3'$(1.6-(-#$/$-#$-3 )4#&,$-321$& 1#(-&3'$ ,.4-3.% ##(3(.- +3$23, 1&(-3.#$2(&-(-3.3'$(1#$5("$.1 //+(" 3(.-3.".,/$-2 3$%.1 #(>$1$-"$2!$36$$-+ !.1 3.18 -#1$ +6.1+#".-#(3(.-2 -+$22.41-2' 2$7/+("(3+8#$2(&- 3$# -(-#(5(#4 +.41-2(R) product as meeting the requirements of a particular industry 23 -# 1#$& .1 / 13("4+ 104 +(=" 3(.-$&+(23$#.11$".&-(9$#.41-2(2-.31$2/.-2(!+$%.1 -8 % (+41$.% -(-#(5(#4 +.41-2(R)/1.#4"33.,$$33'$1$04(1$,$-32.%24"'(-#4231823 -# 1#.1/ 13("4+ 104 +(=" 3(.-2$12 of Bourns(R) products are responsible for ensuring compliance with safety-related requirements and standards applicable to 3'$(1#$5("$2.1 //+(" 3(.-2 Bourns(R)/1.#4"32 1$-.31$".,,$-#$# 43'.1(9$#.1(-3$-#$#%.142$(--4"+$ 1+(%$2 5(-&+(%$"1(3(" +.1+(%$2423 (-(-& //+(" 3(.-2-.1(- -8.3'$1 //+(" 3(.-26'$1$% (+41$.1, +%4-"3(.-, 81$24+3(-/$12.- +(-)418#$ 3'.12$5$1$/1./$138 .1$-5(1.-,$-3 +# , &$-+$22$7/1$22+8 -#2/$"(=" ++8 //1.5$#(-61(3(-&!836. 43'.1(9$#.41-21$/1$2$-3 3(5$2 on a case-by-case basis, use of any Bourns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ourns(R)23 -# 1#/1.#4"32 1$-.33$23$#3.".,/+86(3'-(3$#3 3$2$#$1 +5( 3(.-#,(-(231 3(.-23 -# 1#2&$-$1 ++8 .1 -8.3'$1&$-$1 ++8$04(5 +$-3&.5$1-,$-3 +.1& -(9 3(.-23 -# 1# //+(" !+$3./1.#4"32#$2(&-$#.1, -4% "341$#%.1 42$(- (1"1 %3.12/ "$ //+(" 3(.-2.41-2$7/1$22+8(#$-3(=$2.41-2(R) standard products that are suitable for use in aircraft .12/ "$ //+(" 3(.-2.-24"'/1.#4"32<# 3 2'$$32(-3'$2$"3(.-$-3(3+$#://+(" 3(.-2;-+$22$7/1$22+8 -#2/$"(=" ++8 //1.5$#(-61(3(-&!836. 43'.1(9$#.41-21$/1$2$-3 3(5$2.- " 2$!8" 2$! 2(242$.% -8.3'$1.41-2(R) standard /1.#4"3(- - (1"1 %3.12/ "$ //+(" 3(.-,(&'3-.3!$2 %$ -#3'42(2-.31$".,,$-#$# 43'.1(9$#.1(-3$-#$# -#(2 3 the user's sole risk. '$42$ -#+$5$+.%3$23(-& //+(" !+$3..41-2(R) custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns(R)"423.,/1.#4"32 1$2/$"( ++8#$2(&-$#!2$-3 61(33$- &1$$,$-3!$36$$-.41-2 -#3'$42$11$& 1#(-&3'$42$ -#+$5$+.%24"'3$23(-&3'$ !.5$/1.5(2(.-2 //+(" !+$3..41-2(R) standard products shall also apply to such Bourns(R) custom products. Users shall not sell, transfer, export or re-export any Bourns(R)/1.#4"32.13$"'-.+.&8%.142$(- "3(5(3($26'("'(-5.+5$3'$ #$2(&-#$5$+./,$-3/1.#4"3(.-42$.123."*/(+(-&.%-4"+$ 1"'$,(" +.1!(.+.&(" +6$ /.-2.1,(22(+$2-.12' ++3'$842$ Bourns(R)/1.#4"32.13$"'-.+.&8(- -8% "(+(386'("'$-& &$2(- "3(5(3($21$+ 3(-&3.24"'#$5("$2'$%.1$&.(-&1$231("3(.-2 //+83. ++42$2 -# //+(" 3(.-23' 35(.+ 3$- 3(.- +.1(-3$1- 3(.- +/1.'(!(3(.-2(-"+4#(-&$,! 1&.2.1(-3$1- 3(.- + 1$&4+ 3(.-2413'$1.41-2(R) products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns(R) products may not, without /1(.1 43'.1(9 3(.-%1.,.41-2 -#.13'$.5$1-,$-3!$1$2.+#31 -2%$11$#.11$$7/.13$#3. -8/ 138-.3$+(&(!+$ 3.1$"$(5$".,,.#(3($22.%36 1$ -#3$"'-(" +# 3 .3'$, 7(,4,$73$-3/$1,(33$#!8 //+(" !+$+ 6.41-2#(2"+ (,2( -8 -# +++( !(+(38%.12/$"( +/4-(3(5$".-2$04$-3( + (-"(#$-3 +.1(-#(1$"3# , &$2.1+.231$5$-4$2.1+.23/1.=32 -#(( -8 -# ++(,/+($#6 11 -3($2(-"+4#(-&(,/+($#6 11 -3($2 .%=3-$22%.1/ 13("4+ 1/41/.2$-.-(-%1(-&$,$-3 -#,$1"' -3 !(+(38 bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf