Features
n Miniature Thermal Cutoff (TCO) device
n Surface mount, smallest body size
n Overtemperature and overcurrent protection
n Controls abnormal, excessive current
virtually instantaneously, up to rated limits
n Wide range of temperature options
n High corrosion resistance
n Two height options: low profile & high force
withstand
Applications
n Battery cell protection for:
- Notebook PCs
- Tablet PCs
- Smart phones
n Overtemperature protection for:
- USB Type C cables (e.g. smart phone cables,
notebook AC adapters)
- Electronic cigarettes
- Medical heaters***
SC Series Breaker (Surface Mount Thermal Cutoff Device)
* RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br)
and Chlorine (Cl) content is 1500 ppm or less.
*** Excluding life-saving, life-critical or life-sustaining applications.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Ratings
Agency Recognition
Description
UL, cUL File Number: E215638
(UL 60730)
TUV File Number: R 50411018 0001~0002
(EN 60730 2-9-2010)
How to Order
SC 77 A A B
Series Designator
Trip Temperature (±5 °C)
• 72
• 77
• 82
• 85
Arm Material
A = Cu Alloy, High current type
Body Material
A = PPS
Body Thickness
A = 1.07 ± 0.05 mm
B = 0.94 ± 0.05 mm
Specication
A-TYPE
SC72AAA,
SC72AAB
SC77AAA,
SC77AAB
SC82AAA,
SC82AAB
SC85AAA,
SC85AAB
Trip Temperature 72 °C ± 5 °C 77 °C ± 5 °C 82 °C ± 5 °C 85 °C ± 5 °C
Reset Temperature 40 °C min.
Contact Rating DC9 V / 25 A, 6000 cycles
Maximum Breaking Current DC5 V / 50 A, 100 cycles
Maximum Voltage DC28 V / 25 A, 100 cycles
Minimum Holding Voltage 3 V @ 25 °C for 1 minute
Maximum Leakage Current 200 mA max. @ 25 °C
Resistance 5 milliohms max.
Mini-breaker TCOs reset when the following conditions are met:
• The ambient temperature has dropped by 10 °C below the minimum trip temperature; and
• Power to the TCO has been cycled (off/on)
4134N
S C 77A
0 0
Product Structure
Circuit Diagram
NORMAL CIRCUIT
CIRCUIT
AFTER OPENING
4.7
(.185)
4.4 +0.25/-0.05
(.173 +.010/-.002)
ARM
TERMINAL
BASE
TERMINAL
COVER
BIMETAL
DISC
ARM
COVER PLATE
BASE
CONTACT
PTC
2.8
(.110)
0.125
(.005) R
4 PLCS.
4 PLCS.
1.07 ± 0.05
(.042 ± .002) SCxxAAA
0.94 ± 0.05
(.037 ± .002) SCxxAAB
0.08
(.003)
1.71
(.067)
1.71
(.067)
0.5
(.020)
1.54
(.061)
1.49
(.059)
BASE
TERMINALS
ARM
TERMINALS
3.42
(.135)
2.3
(.091)
0.7
(.028)
BASE
TERMINALS
ARM
TERMINALS
0.7
(.028)
• ModelSCxAABisthelowprole0.94mmheightversion.
• ModelSCxAAAisdesignedwithareinforcedcovertowithstand
higher forces during the USB cable manufacturing injection molding
process.
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SC Series Breaker (Surface Mount Thermal Cutoff Device)
Product Dimensions
DIMENSIONS: MM
(INCHES)
Typical Performance
Current vs. Temperature Curves
A-Type
Temperature (°C)
Current (A)
9
10
11
12
13
14
7
6
5
4
3
2
1
0
8
15
20 30 40 50 60 70 80
SC72A (Low 67 °C avg.)
SC77A (Low 72 °C avg.)
SC82A (Low 77 °C avg.)
SC85A (Low 80 °C avg.)
4.7
(.185)
4.4 +0.25/-0.05
(.173 +.010/-.002)
ARM
TERMINAL
BASE
TERMINAL
COVER
BIMETAL
DISC
ARM
COVER PLATE
BASE
CONTACT
PTC
2.8
(.110)
0.125
(.005) R
4 PLCS.
4 PLCS.
1.07 ± 0.05
(.042 ± .002) SCxxAAA
0.94 ± 0.05
(.037 ± .002) SCxxAAB
0.08
(.003)
1.71
(.067)
1.71
(.067)
0.5
(.020)
1.54
(.061)
1.49
(.059)
BASE
TERMINALS
ARM
TERMINALS
3.42
(.135)
2.3
(.091)
0.7
(.028)
BASE
TERMINALS
ARM
TERMINALS
0.7
(.028)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SC Series Breaker (Surface Mount Thermal Cutoff Device)
Surface Mount Recommendations
TheModelSCSeriesbreakerisdesignedforreowandhandsoldering.Itisnotdesignedorwarrantedforowsoldering.Thefollowing
conditions must be adhered to:
ReowSoldering:
Therecommendedreowsoldering
conditions are as follows:
150 ~ 180 °C ............... 100 ~ 150 seconds
≤220°C........................ 20 ~ 40 seconds
255 ~ 260 °C ............... 5 ~ 10 seconds
Processbreakerinareowfurnaceusing
theproleshownabovethreetimes,
followed by positioning the breaker in
ambient temperature of +25 °C for 8 hours.
Time (Seconds)
Temperature (°C)
0
30
60
90
120
150
180
210
240
270
060 120 180 240 300 360
TEMPERATURE
150 ~ 180 °C
≤220 °C
245 °C
_ TIME
100 ~ 150 Seconds
20 ~ 40 Seconds
Peak
.....
.....
.....
Do not expose the breaker to temperatures exceeding +260 °C.
Recommended Reow Prole
Recommended Land Pattern
Recommended Mask Thickness: 0.12 mm / (.005 in.)
Recommended Solder Particle Size: 30 µm
Mounting Cautions
Inordertoprotectthehousingandmechanicalpartsinsidefromdeformation,preventexcessiveloadatthetimeofpartabsorption/part
deployment and mounting. A part absorption nozzle more than 2 mm in diameter with a 3 N (5 N max.) mounting load is recommended. Any
shocktotheproductbythenozzleduringthemountingproceduremayhaveanegativeimpactonthefunctionofthebreaker.
DIMENSIONS: MM
(INCHES)
4.7
(.185)
4.4 +0.25/-0.05
(.173 +.010/-.002)
ARM
TERMINAL
BASE
TERMINAL
COVER
BIMETAL
DISC
ARM
COVER PLATE
BASE
CONTACT
PTC
2.8
(.110)
0.125
(.005) R
4 PLCS.
4 PLCS.
1.07 ± 0.05
(.042 ± .002) SCxxAAA
0.94 ± 0.05
(.037 ± .002) SCxxAAB
0.08
(.003)
1.71
(.067)
1.71
(.067)
0.5
(.020)
1.54
(.061)
1.49
(.059)
BASE
TERMINALS
ARM
TERMINALS
3.42
(.135)
2.3
(.091)
0.7
(.028)
BASE
TERMINALS
ARM
TERMINALS
0.7
(.028)
Standard Packaging Specications
Reel (13 inch) ..................................................................................................................................................................5,000pcs.(xed)
Outer Box (690 mm x 344 mm x 136 mm) ....................................................................................................................50,000pcs.(xed)
Marking .......................................... A label will be attached on the reel and outer box which includes the following items, at a minimum:
Partname,partnumber,quantity,lotnumber,safetyapprovalmark(UL,etc.),
company name (Bourns KK) and any other items required by the customer
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SC Series Breaker (Surface Mount Thermal Cutoff Device)
REEL
CARRIER TAPE
DIMENSIONS: MM
(INCHES)
13.5 ± 1.0
(.531 ± .039)
17.5 ± 1.0
(.689 ± .039)
21.0 ± 0.8
(.827 ± .031)
1.0
(.039)R
13.0 ± 0.2
(.512 ± .008) DIA.
DIA.
CENTER HOLE
ENLARGEMENT
2.0 ± 0.5
(.079 ± .020)
2.0
(.079) 2.8
(.110)
2.0
(.079)
13.0 ± 0.2
(.512 ± .008)
80.0 ± 1.0
(3.150 ± .039)
DIA.
330.0 ± 2.0
(12.992 ± .079)
DIA.
10.0
(.394) DIA.
90.0
(3.543) DIA.
35 °
5.0
(.197)
R
0.2
0.4
0.6
0.8
NOTES:
1) The corner and ridge radiuses (R) of inside cavity
are 0.3 mm / (.012 in.) max.
2) Cumulative tolerance of 10 pitches of the sprocket
hole is ±0.2 mm / (.008 in.).
3) Measuring of cavity positioning is based on cavity
center in accordance with JIS/IEC standard.
DIA.
1.50 +0.1/-0
(.059 +.004/-.000)
1.75
(.069)
5.5
(.217)
12.00 +0.2/-0.1
(.472 +.008/-.004)
2.00
(.079)
4.00
(.157)
8.00
(.315)
3.15
(.124)
0.3 ± 0.05
(.012 ± .002)
5.05
(.199)
1.2 +0.2/-0.1
(.047 +.008/-.004)
1.5 +0.2/-0.1
(.059 +.008/-.004)
TOLERANCES: 0.1 UNLESS OTHERWISE NOTED
(.004)
Typical Part Marking
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SC Series Breaker (Surface Mount Thermal Cutoff Device)
Application Temperature Range
........................................... -30 ~ 100 °C
Storage Conditions
1) The breaker must be stored in the standard packaging with the following conditions:
ambient temperature of -10 to +40 °C, RH <75 % with no radical temperature
change,directsunshine,excessivevibrationorshock.
2) Avoidstoragelocationswherethereisapossibilityofgeneratingcorrosivegas
suchasfromsaltbreeze,chlorine,hydrogensulde,ammonium,sulde-oxidation,
hydrogen chloride, acetate, etc.
3) Storage period should be no longer than 24 months from date of shipment.
DATE CODE:
MONTH (1~9, X, Y, Z)
DATE
YEAR
MACHINE NO.
ROMAN NUMERAL (I, II, III, ETC.) or
ARABIC NUMERAL (1, 2, 3, ETC.) = OKAYAMA FACTORY
ALPHABET = SHIGA FACTORY
9018N
**
SC **AAB
SERIES DESIGNATOR
MANUFACTURER’S
INTERNAL CODE
(ALPHANUMERIC CHARACTER)
TRIP TEMPERATURE - °C
(72, 77, 82, 85)
ARM MATERIAL
(A = Cu ALLOY HIGH CURRENT TYPE)
THICKNESS
(A = 1.07 ± 0.05 mm; B = 0.94 ± 0.05 mm)
RESIN TYPE
(A = PPS)
Environmental Specications
MoistureSensitivityLevel .................... 1
ESDClassication(HBM).................... 6
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SC Series Breaker (Surface Mount Thermal Cutoff Device)
Caution when using Breaker
Before using the breaker, please fully read the DESIGN AND HANDLING CAUTIONSstatedbelowtoavoidbreakerperformancedeterioration
and/or damage to the breaker body or terminal.
DESIGN CAUTIONS
1. Usewithintheelectricalratingsspeciedinthisdatasheet.Ifusedovertheratingofvoltageorcurrent,ON-OFFlifemightbeimpacted
and contact may deteriorate due to breaker arm damage.
2. Ifusedoverthemaximumelectricalratingspeciedinthisdatasheet,thecircuitmaynotopensafelyoroperateproperly.Pleasetestyour
deviceforanyabnormalitiesandconrmthatthebreakerwillopenthecircuitsafelyinyourdevice.Anyuseoverthemaximumelectrical
rating is at the sole risk of the user.
3. Mountthebreakeronyourdevicewhereheatisthehighestinordertotransferiteffectivelytothebreaker.
4. Ifthebreakerisafxedwithanadhesive(resin,etc.),beforeproceeding,fullytest,evaluateandverifythattheadhesivepresentsno
negativeeffectsonthebreakerbeforeproceeding.
5. Afterthebreakerismounted,afxitsothatthebreakerbodyandterminalswillnotmove.Ifnotafxedproperly,breakerresistancecould
increaseorcontactcouldopenduetostressduringhandlingorvibration/shockduringtransportation.
6. Ifbreakeristoberesin-molded,testandevaluatetheapplicationtodeterminewhetherthebreakercanbeusedeffectively.
7. ThebreakercannotbeusedasarepetitiveON-OFFthermostat.
8. The breaker is not washable. Do not wash.
9. Do not let a solder iron touch the breaker body.
10. Do not attach solder to the breaker body.
11. Whenmountingandaftermountingthebreaker,donotapplysupersonicvibration.Vibrationandheatmaycausebreakerresistance
toincreaseormaycausebodydamage.Ifyouplantoapplysupersonicvibrationaftermountingthebreaker,youwillneedtoevaluate
whetherthebreakerissuitableforyourspecicapplication.Thebreakerisnotdesignedorwarrantedtowithstandsupersonicvibration.
12. Donotusethebreakerinthefollowingenvironments:
a) Water, oil, chemical or organic solutions
b) Direct sunlight, outdoor exposure, dust
c) Dew condensation, where the breaker could get wet
d) Saltbreeze,chlorine,hydrogensulde,ammonium,sulde-oxidation,hydrogenchloride,acetateandanywherethereisapossibilityof
generatingcorrosivegassuchassulfurousacidgas
e) Strongstaticelectricchargeorelectromagneticwave
13. Thebreakerisnotdesignedortestedfor,andshouldnotbeusedin,aerospace,airplane,nuclear,military,life-saving,life-criticalor
life-sustainingmedicalandotherrelatedapplicationswherefailureormalfunctionmayresultinpersonalinjury,deathorseverepropertyor
environmentaldamage.
12/18
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SC Series Breaker (Surface Mount Thermal Cutoff Device)
Caution when using Breaker (Continued)
HANDLING CAUTIONS
1. Since the breaker body is composed of plastic parts, do not clamp or dent with tools as this could cause a resistance increase or body
damage.
2. Breakerterminalsarethincopper-alloywithrightangleedges.Handlecarefullytoavoidinjurytongers.Handlingwhilewearingnger
cots and using tweezers is recommended.
3. WhenmountingthebreakeronacellorPCMboard,becarefultoavoidplacingexcessivestressonthebreakerbodyandterminals.
Excessivestressmaycausearesistanceincreaseorbodydamage.Pleaserefertothefollowingcautions:
a) Do not apply more than 5 N (AAB) or 10 N (AAA) moment to the breaker body (refer to Figure 1)
b) Do not apply more than 1.5 cN-m (AAB) or 3 cN-m (AAA) twist torque to the breaker body (refer to Figure 2)
c) Do not apply more than 15 N (AAB) or 30 N (AAA) bending force to the breaker body (refer to Figure 3)
Due to possible updates to safety standards and other reasons,
theremaybechangesinspecicationsforthisdatasheetwithout
priornotication.Therefore,beforedesign-inforyourapplication,
pleasecontactusforthemostup-to-datespecications.
Asia-Pacic:
Tel: +886-2 2562-4117
Email: asiacus@bourns.com
Europe:
Tel: +36 88 520 390
Email: eurocus@bourns.com
The Americas:
Tel: +1-951 781-5500
Email: americus@bourns.com
www.bourns.com
Figure 1 Figure 2 Figure 3
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and
(32 ?+( 3$2".++$"3(5$+8:.41-2;
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
6(3'.43-.3("$2$122'.4+#"'$"*%.1 -#.!3 (-3'$+ 3$231$+$5 -3(-%.1, 3(.- -#5$1(%83' 324"'(-%.1, 3(.-(2"411$-3
and complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns®/1.#4"3(- 42$1 //+(" 3(.-, 85 18
%1.,3'$# 3 2'$$3"' 1 "3$1(23("2 -#/ 1 ,$3$12#4$3.(3'$".,!(- 3(.-.%3'$.41-2® product with other components
(-3'$42$1<2 //+(" 3(.-.1((3'$$-5(1.-,$-3.%3'$42$1 //+(" 3(.-(32$+%'$"' 1 "3$1(23("2 -#/ 1 ,$3$12.% .41-2®
/1.#4"3 +2." - -##.5 18(-#(>$1$-3 //+(" 3(.-2 -# "34 +/$1%.1, -"$, 85 18.5$13(,$2$122'.4+# +6 825$1(%8
the actual performance of the Bourns®/1.#4"3(-3'$(12/$"(="#$5("$2 -# //+(" 3(.-2 -#, *$3'$(1.6-(-#$/$-#$-3
)4#&,$-321$& 1#(-&3'$ ,.4-3.% ##(3(.- +3$23, 1&(-3.#$2(&-(-3.3'$(1#$5("$.1 //+(" 3(.-3.".,/$-2 3$%.1
#(>$1$-"$2!$36$$-+ !.1 3.18 -#1$ +6.1+#".-#(3(.-2
-+$22.41-2' 2$7/+("(3+8#$2(&- 3$# -(-#(5(#4 +.41-2® product as meeting the requirements of a particular industry
23 -# 1#$&.1 / 13("4+ 104 +(=" 3(.-$&+(23$#.11$".&-(9$#.41-2(2-.31$2/.-2(!+$%.1 -8
% (+41$.% -(-#(5(#4 +.41-2®/1.#4"33.,$$33'$1$04(1$,$-32.%24"'(-#4231823 -# 1#.1/ 13("4+ 104 +(=" 3(.-2$12
of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to
3'$(1#$5("$2.1 //+(" 3(.-2
Bourns®/1.#4"32 1$-.31$".,,$-#$# 43'.1(9$#.1(-3$-#$#%.142$(--4"+$ 1+(%$2 5(-&+(%$"1(3(" +.1+(%$2423 (-(-&
//+(" 3(.-2-.1(- -8.3'$1 //+(" 3(.-26'$1$% (+41$.1, +%4-"3(.-, 81$24+3(-/$12.- +(-)418#$ 3'.12$5$1$/1./$138
.1$-5(1.-,$-3 +# , &$-+$22$7/1$22+8 -#2/$"(=" ++8 //1.5$#(-61(3(-&!836. 43'.1(9$#.41-21$/1$2$-3 3(5$2
on a case-by-case basis, use of any Bourns®/1.#4"32(-24"'4- 43'.1(9$# //+(" 3(.-2,(&'3-.3!$2 %$ -#3'42(2 3
3'$42$1<22.+$1(2*(%$"1(3(" + //+(" 3(.-2(-"+4#$#$5("$2(#$-3(=$#!83'$..# -#14&#,(-(231 3(.- 2+ 22
#$5("$2 -#&$-$1 ++8$04(5 +$-3"+ 22(=" 3(.-2.432(#$.%3'$-(3$#3 3$2
.41-2$7/1$22+8(#$-3(=$23'.2$.41-2®23 -# 1#/1.#4"323' 3 1$24(3 !+$%.142$(- 43.,.3(5$ //+(" 3(.-2.-24"'
/1.#4"32<# 3 2'$$32(-3'$2$"3(.-$-3(3+$#://+(" 3(.-2;-+$22$7/1$22+8 -#2/$"(=" ++8 //1.5$#(-61(3(-&!836.
43'.1(9$#.41-21$/1$2$-3 3(5$2.- " 2$!8" 2$! 2(242$.% -8.3'$1.41-2®23 -# 1#/1.#4"32(- - 43.,.3(5$
//+(" 3(.-,(&'3-.3!$2 %$ -#3'42(2-.31$".,,$-#$# 43'.1(9$#.1(-3$-#$# -#(2 33'$42$1<22.+$1(2*%.41-2
$7/1$22+8(#$-3(=$2 24!" 3$&.18.% 43.,.3(5$ //+(" 3(.-(-3'$# 3 2'$$3%.1(3223 -# 1#/1.#4"3224"' 2(-%.3 (-,$-3
.1+(&'3(-&24"'(#$-3(=" 3(.-,$ -23' 3.41-2' 21$5($6$#(3223 -# 1#/1.#4"3 -#' 2#$3$1,(-$#3' 3(%24"'.41-2®
23 -# 1#/1.#4"3(2".-2(#$1$#%.1/.3$-3( +42$(- 43.,.3(5$ //+(" 3(.-2(32'.4+#.-+8!$42$#(-24"'24!" 3$&.18.%
43.,.3(5$ //+(" 3(.-2-81$%$1$-"$3..41-2®23 -# 1#/1.#4"3(-3'$# 3 2'$$3 2".,/+( -36(3'3'$23 -# 1#
.1: 43.,.3(5$&1 #$;#.$2-.3!8(32$+%,$ -3' 3.41-2' 2 //1.5$#24"'/1.#4"3%.142$(- - 43.,.3(5$ //+(" 3(.-
Bourns®23 -# 1#/1.#4"32 1$-.33$23$#3.".,/+86(3'-(3$#3 3$2$#$1 +5( 3(.-#,(-(231 3(.-23 -# 1#2&$-$1 ++8
.1 -8.3'$1&$-$1 ++8$04(5 +$-3&.5$1-,$-3 +.1& -(9 3(.-23 -# 1# //+(" !+$3./1.#4"32#$2(&-$#.1, -4% "341$#%.1
42$(- (1"1 %3.12/ "$ //+(" 3(.-2.41-2$7/1$22+8(#$-3(=$2.41-2® standard products that are suitable for use in aircraft
.12/ "$ //+(" 3(.-2.-24"'/1.#4"32<# 3 2'$$32(-3'$2$"3(.-$-3(3+$#://+(" 3(.-2;-+$22$7/1$22+8 -#2/$"(=" ++8
//1.5$#(-61(3(-&!836. 43'.1(9$#.41-21$/1$2$-3 3(5$2.- " 2$!8" 2$! 2(242$.% -8.3'$1.41-2® standard
/1.#4"3(- - (1"1 %3.12/ "$ //+(" 3(.-,(&'3-.3!$2 %$ -#3'42(2-.31$".,,$-#$# 43'.1(9$#.1(-3$-#$# -#(2 3
the user’s sole risk.
'$42$ -#+$5$+.%3$23(-& //+(" !+$3..41-2® custom products shall be negotiated on a case-by-case basis by Bourns
and the user for which such Bourns®"423.,/1.#4"32 1$2/$"( ++8#$2(&-$#!2$-3 61(33$- &1$$,$-3!$36$$-.41-2
-#3'$42$11$& 1#(-&3'$42$ -#+$5$+.%24"'3$23(-&3'$ !.5$/1.5(2(.-2 //+(" !+$3..41-2® standard products shall
also apply to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns®/1.#4"32.13$"'-.+.&8%.142$(- "3(5(3($26'("'(-5.+5$3'$
#$2(&-#$5$+./,$-3/1.#4"3(.-42$.123."*/(+(-&.%-4"+$ 1"'$,(" +.1!(.+.&(" +6$ /.-2.1,(22(+$2-.12' ++3'$842$
Bourns®/1.#4"32.13$"'-.+.&8(- -8% "(+(386'("'$-& &$2(- "3(5(3($21$+ 3(-&3.24"'#$5("$2'$%.1$&.(-&1$231("3(.-2
//+83. ++42$2 -# //+(" 3(.-23' 35(.+ 3$- 3(.- +.1(-3$1- 3(.- +/1.'(!(3(.-2(-"+4#(-&$,! 1&.2.1(-3$1- 3(.- +
1$&4+ 3(.-2413'$1.41-2® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without
/1(.1 43'.1(9 3(.-%1.,.41-2 -#.13'$.5$1-,$-3!$1$2.+#31 -2%$11$#.11$$7/.13$#3. -8/ 138-.3$+(&(!+$
3.1$"$(5$".,,.#(3($22.%36 1$ -#3$"'-(" +# 3 
.3'$, 7(,4,$73$-3/$1,(33$#!8 //+(" !+$+ 6.41-2#(2"+ (,2( -8 -# +++( !(+(38%.12/$"( +/4-(3(5$".-2$04$-3( +
(-"(#$-3 +.1(-#(1$"3# , &$2.1+.231$5$-4$2.1+.23/1.=32 -#(( -8 -# ++(,/+($#6 11 -3($2(-"+4#(-&(,/+($#6 11 -3($2
.%=3-$22%.1/ 13("4+ 1/41/.2$-.-(-%1(-&$,$-3 -#,$1"' -3 !(+(38
 
bilingual versions are available at:
Web Page:
http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
