Murata
Manufacturing Co., Ltd.
Cat.No.O30E-3
Microwave Coaxial Connector
MICROWAVE
COAXIAL
CONNECTOR
SWC/GSC/FSC/CCR/BFAType
"SWC Type
"GSC Type
"FSC Type
"CCR Type
"BFA Type
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
1
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
CONTENTS
"Ultra-Miniature SMT SWC Type . . . . . . . . . . . . . . . 2
Y
5
"Ultra-Miniature SMT GSC Type . . . . . . . . . . . . . . . . 6
Y
9
"Miniature SMT FSC Type . . . . . . . . . . . . . . . . . . . 10
Y
14
"SMT CCR Type. . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Y
18
"Low Profile BFA Type. . . . . . . . . . . . . . . . . . . . . . 19
Y
22
"
Miniaturized micro wave coaxial connector Cable list
. . . 23
Y
24
Ultra-Miniature SMT SWC Type
COAXIAL CONNECTOR
2
SMD type coaxial connector with switch. For high density mounting.
Useful for automatic characteristic measurement of hand held phone.
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
!FEATURES
1. The coaxial connector with switch is very useful for
characteristic measurement of hand held phone and
microwave circuit.
2. It is possible to switch the line connection and
disconnection easily by special probe.
3. Small size, low profile. Size 3.4Z3.3Z1.9mm (LZWZH).
Mounting dimension 11.2mm2.
4. Excellent characteristic. Low IL (0.1dB max.). VSWR
1.2max at DC to 3GHz. Isolation 15 dB min.
5. Surface mountable and reflow solderable.
6. Tape package available.
!APPLICATION
Cellular phone, PHS, Other wireless and measurement
equipment.
!PART NUMBER
"Receptacle (coaxial connector with switch)
"Probe for automatic measurement
MM126012
"L type probe with lock function
MXGM76RY1000
!STRUCTURE (MM8329-2600)
Part Number
MM8329-2600
MM8329-2600TB1
MM8329-2600TB2
Packaging
Bulk package
178mm Dia. Taping
330mm Dia. Taping
Quantity
Free
1000pcs/reel
3000pcs/reel
!DIMENSIONS (MM8329-2600)
!DIMENSIONS (MM126012)
!DIMENSIONS (MXGM76RY1000)
: Hot Terminal (A : IN)
: Hot Terminal (B : OUT)
: Ground Terminal
,,
,,,,
,,
,,
,,,
,
,,
,,
,
,,
,
,
,
,
,,
,,,
,
3.4
φ2.1
(0.6)
1.9
1
,,
,,
,
,
,,
,,,
,,
,
,,
,,
,
,
,
,
,
2.4
2.9
(2.3)
3
1
3.3
A
B
0.5
(in mm)
(in mm)
(in mm)
Tolerances Unless
Otherwise SpecifiedT0.2
φ19.7T0.2
φ2.6T0.15
φ10T0.2
16T0.15
9T0.2
9T0.2
SMA-J
2max.
φ0.4T0.05
φ1.33T0.05
φ1.6T0.1
φ2.5T0.15
φ7.5T0.15
(27.18)
1.65T0.25
11.85T0.2 13.73T0.25 (1.6)
SWC-contact
3.8
100T3
24.83
18.83
HEX7.9 SMA-J
SWC-CONTACT
5.6
8.3
*It is possible to change the cable length
or SMA connector type. Tolerances Unless
Otherwise SpecifiedT0.5
OUT IN
Without Probe OUT IN
With Probe
Probe
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
Ultra-Miniature SMT SWC Type
COAXIAL CONNECTOR
3
!SPECIFICATION AND CHARACTERISTIC
(COAXIAL CONNECTOR WITH SWITCH)
"Receptacle (MM8329-2600)
!RATING AND CHARACTERISTICS
"Probe for automatic measurement (MM126012)
"L Type probe with lock function (MXGM76RY1000)
!MATERIALS AND FINISH
Item
Frequency Range
VSWR
Nominal Impedance
Temperature Range
Voltage Rating
Contact Resistance
Withstanding Voltage
Insulation Resistance
IL at On switch
Isolation at OFF switch
Durability
Specification
From DC to 3GHz
1.2max.
50Ω
Y40˚C to W90˚C
250Vrms
25mΩmax.
AC300T20Vrms
500MΩmin.
0.1dB max.
15dB min.
50cycles
Item
Frequency Rating
VSWR
Nominal Impedance
Durability
Specification
DC to 3GHz
1.5max.
50Ω
100000
Item
Frequency Rating
VSWR
Nominal Impedance
Durability
Specification
DC to 3GHz
1.3max.
50Ω
1000
Part Name
Elastomer
Case
Ground terminal
Hot terminal (A)
Hot terminal (B)
Material
Insulation rubber
Engineering plastic
Copper alloy
Copper alloy
Copper alloy
Finish
None
None
Silver plating
Gold plating
Gold plating
!NOTICE
1. Automatic measurement probe (MM126012)
MM126012 should be used on the condition in Fig.3 for
good connection without any damages.
2. L type probe with lock function (MXGM76RY1000)
1See Fig.4. For connection, it should be confirmed if the
direction of probe and receptacle are matched.
Connect vertically with pinching the side of handle.
After connection, the probe should be pushed from the
top of handle, and be confirmed if it is locked. For
disconnection, the probe should be disconnected
vertically with pinching the side of handle. The probe
must not be disconnected with pinching the cable not
to have any damage.
2The cable must not be twisted for protection of the
center conductor assembled point.
3For connector protection.
(1)The stress for connector body.
See Fig.5. The stress over 2.94N (0.3kgf) must not
be applied to the mated connector body from
direction A or B.
(2)The stress for cable assembled point.
See Fig.5. The stress over 2.94N (0.3kgf) must not
be applied to the cable assembled point of mated
connector from direction C.
(3)The stress for cable.
See Fig.5. The stress over 14.7N (1.5kgf) must not
be applied to the cable of connector to direction D.
3. Pattern layout
Use the pattern in Fig.6 for the best characteristic.
4. Soldering condition
1Reflow soldering
Use the reflow profile as shown in Fig.1 and Fig.2.
2Iron soldering
Use the following condition.
(1)Preheating : 150˚C, 60Y120sec
(2)Temperature of tip : 280˚C
(3)Time : less than 3sec.
3Solder and flux
(1)Use Rosin based flux, but not with strong acid flux
(Chlorine content should be less than 0.20wt%).
(2)Use the eutectic solder
4The flux should not be left inside of receptacle
because of the electrical performance degradation
(contact resistance and etc.).
5. Cleaning
Do not wash the this connector.
6. Storage condition
Temperature : Y10 to W40˚C
Humidity : 30 to 80%RH
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
Ultra-Miniature SMT SWC Type
COAXIAL CONNECTOR
4
!ALLOWABLE TEMPERATURE AND TIME OF
REFLOW SOLDERING (Fig. 1)
!REFLOW SOLDERING STANDARD
CONDITIONS (Fig. 2)
!
INSERTION THE AUTOMATIC MEASUREMENT PROBE
(MM126012) in RECEPTACLE (MM8329-2600) (Fig. 3)
Time (sec.)
Temperature (˚C)
Solder : Sn 60% - Pb40%
260
250
240
230
220
210
200
190
180 30 60 90 120 150 180
220
200
100
50
0
20
Time (sec.)
Pre-heating 150T10˚C
Temperature (˚C)
Peak temperature 225T5˚C
10 sec. max.
•Measuring point of temperature
in-out terminals of the device
•Reflow soldering
Both convection and infared rays
Hot air
Hot plate
60 - 120 sec.
20 - 30 sec. max.
The pressure force of
prove must be
5.9 to 14.7N(0.6 to 1.5 kgf)
with virtical (0T2˚)
direction
0T2˚
!
RECEPTACLE (MM8329-2600) AND L TYPE PROBE
(MXGM76RY1000) CONNECTION AND
DISCONNECTION (Fig. 4)
!STRESS FOR MATED CONNECTOR (Fig. 5)
Pull off the probe
with the pinching
by finger
The hooks of L type
probe must be fit
the notch of SWC
Confirm if the direction
of probe and receptacle
are matched.
Push the top of
the probe vertically
Hook for
locking
Notch for locking
qDirection
wInsertion method eConnection
rConnection condition tDisconnection
Hook for locking
Notch for
locking
A A B B
C
C
MM8329-2600
MXGM76RY1000
pinch D
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
Ultra-Miniature SMT SWC Type
COAXIAL CONNECTOR
5
!LAND PATTERN (Fig. 6)
!DIMENSIONS OF PLASTIC TAPE (Fig. 7)
,,,
,,
,
,,
,
,,
,,
,,,,
,,
4.4
2.4
LAND
ELECTRODE
(1.5)
1.74
1
0.5
1.34
2.4
3.4
4.4
5.14
3
1
*(1.5)*
Through hole
,
,
,
,
,,
,,
,
,
,
,
8T0.1
0.3T0.05
5.5T0.1
3.7T0.1
1.75T0.1
12T0.2
3 max.
φ1.5
2.0T0.1
3 max.
3.9T0.1
Feeding direction
1.9T0.15
4.0T0.1 W0.1
Y0
(Note) "Please design I/O pattern*so that the impedance
matches 50 ohm.
"The material of P.C.B. is the epoxy resin of glass
fabric base. (
ε
r = 4.8) Thickness is 1.0 mm.
"The solder resist should be printed except for the
land pattern on the P.C.B.
(in mm)
(in mm)
Ultra-Miniature SMT GSC Type
COAXIAL CONNECTOR
6
New coaxial connector GSC type.
Microwave, Low profile 2mm height, SMD.
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
!FEATURES
1. The mating height is only 2mm maximum by new
mechanical design. Suitable for low profile design.
2. Receptacle size is 3.0Z3.0mm. Suitable for high density
design.
3. New mating mechanical design makes stable feeling
connection.
4. Soft and ultra thin 0.8mm diameter flexible coaxial cables is
available. Easy cable lay out will be realized. In addition to
flexible cable, ultra thin 0.62mm diameter semi rigid cable
is also available. Low insertion loss and low leakage will be
realized.
5. High performance with wide frequency range (DC to 6GHz).
VSWR at DC to 3GHz is 1.2 maximum. VSWR at 3GHz to
6GHz is 1.3 maximum.
6. Surface mountable and reflow solderable.
7. Tape package is available.
!APPLICATIONS
Portable telephone, cordless telephone (analog and digital),
GPS, and other microwave radio and measurement
equipment.
!PART NUMBER
"Straight receptacle for printed circuit board.
"Right angle cable assembly with flexible cable.
MXTK88------ (Flexible Cable)
MXTK92------ (Flexible Cable)
MXTK91------ (Semirigid Cable)
"SMA-GSC adapters for receptacle.
MM121470 (Hand measurement)
MM121471 (Automatic measurement)
"SMA-GSC adapter for cable assembly
MM121480
!DIMENSIONS
!DIMENSIONS (MM9329-2700)
!DIMENSIONS (MXTK92------)
Part Number
MM9329-2700
MM9329-2700TB1
MM9329-2700TB2
Packaging
Bulk package
178mm Dia. Taping
330mm Dia. Taping
Quantity
Free
1000pcs/reel
5000pcs/reel
,,
,
2 max.
2.8 max.
0.7 min.
,,
,,
,,
,,
,,
,
,,
,,
,,
,
0.5±0.1
0.15±0.03
φ2.1
φ1±0.1
2.6 0.12±0.03 0.5±0.1
0.15±0.03
3
2.6
2.1
3
2.3
1.15
(R0.15)
(R0.15)
,,
,,
,,
,,
,,
,,
,
,,
,
,
,
,
,
,,
,,
,,
,,
,,
,,
,,
,,
,,
,,
,,
,
,,
,,
,,
,,
,,
,,
,
0.5±0.1
0.15±0.03
φ2.1
φ1±0.1
2.6 0.12±0.03 0.5±0.1
0.15±0.03
3
Hot Terminal
Ground Terminal
2.6
2.1
3
2.3
1.15
(R0.15)
(R0.15)
,,
,,
,,
,,
,,
,,
,
,,
,
,
,
,
,
,,
,,
,,
,,
,,
,,
,,
,,
,,
,,
,,
,
,,
,,
,,
φ2.55 1.5 2.8
3.5±0.5
Clearance for matingProfile (in mm)
Tolerances Unless
Otherwise Specified: T0.2
(in mm)
Tolerance Unless
Otherwise Specified: T0.3
(in mm)
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
Ultra-Miniature SMT GSC Type
COAXIAL CONNECTOR
7
!SMA-GSC ADAPTERS
"SMA-GSC adapters for receptacle
"SMA-GSC adapter for cable assembly
!CABLE LENGTH TOLERANCE
SMA-JACK
13.4
5.08 7.4 4.4 2.1
φ5.33
φ5.33
φ2.55
φ3
φ4.6
(in mm)
MM121470 (Hand measurement)
(in mm)
MM121471 (Automatic measurement)
(in mm)
MM121480
SMA-JACK
18
5.08 2 7.95 2.3
φ5.33
φ6.5
φ4.06
φ5.33
SMA-JACK
13.4
8.55
5.08 0.85
φ2.1
φ5.33
φ5.33
!RATING AND CHARACTERISTICS
!MATERIALS AND FINISH
"MM9329-2700
"MXTK88------
MXTK91------
MXTK92------
!PART NUMBERING FOR CABLE ASSEMBLY
(Please specify the part number when ordering.)
1Cable assembly
24 Connector code
3Cable code (See cable list on page 23 to 24 for detail.)
(*) Based on Japanese Industrial Standard (JIS).
56 Full length of cable assembly
Length (mm) = 5Z106
Ex. :1500mm =500Z100/5000
Ex. :1000mm =100Z101/1001
Item
Frequency Range
VSWR
Nominal Impedance
Temperature Range
Voltage Rating
Contact Resistance
Withstanding Voltage
Insulation Resistance
Durability
Specification
DC to 6GHz
1.2 Max. (DC to 3GHz)11
1.3 Max. (3GHz to 6GHz)
50Ω
Y40˚C to W90˚C
250Vrms
15mΩMax.
AC300Vrms
500MΩMin.
50 cycles
Part Name
Center Contact
Outer Contact
Insulator
Materials
Copper Alloy
Copper Alloy
Engineering plastic
Finish
Gold plated
Silver plated
None
Part Name
Center Contact
Outer Contact
Insulator
Materials
Copper Alloy
Copper Alloy
Engineering plastic
Finish
Gold plated
Silver plated
None
MX
(Ex.)
1 2 3 4 5
TK 92 XX 100
6
0
Code
TK
XX
Connector
GSC type plug connector
None
Code
88
92
91
Cable
0.4D (*)
0.4D (*)
0.52D (*)
Outer
Diameter
0.83
mm
0.8
mm
0.62
mm
Outer conductor
construction
Single shield
Single shield
Semirigid cable
Insulation
material
PFA
PFA
PTFE
Minimum
Bending radius
3.3mm
3.3mm
3.2mm
L
40
100
Over
500
1000
100
Cable Length L (mm) (∗)
∗ L must be 20mm Min.
Dimensional
tolerance (mm)
500
Till
1000
–
±3
±4
±10
+2% of L
–0% of L
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
Ultra-Miniature SMT GSC Type
COAXIAL CONNECTOR
8
!NOTICE
Disaccord with following notes could give mechanical damage
and/or poor electrical performance.
1. Mechanical Stress :
Stress to the connector should be limited as shown Fig.1.
2. PCB mount pattern dimension :
Dimensions shown in Fig. 2 should be used for the PCB
design.
3. Disengagement and engagement.
Use tool P/N M22001 (Fig.3). The connector to be
disengaged and engaged should be pulled out or insert to
the vertical direction using the tool. Do not try to pull out by
the cable, because there is the possibility a wire breaks.
4. Cable and connector handling :
Do not give a twisted torque to the cable and connector.
5. Reflow soldering condition :
Reflow soldering should be carried out according to
condition as shown in Fig.4.
And the eutectic solder should be used.
6. When MM9329-2700 was soldered on P.C.B.,
•Use the metal mask pattern as illustrated in Fig.2
(Thickness is 0.15mm) in order to print the proper quantity.
•Use Rosin based flux, but not with strong acid flux
(Chlorine content should be less than 0.20wt%).
•Flux should be cleaned thoroughly.
7. Washing :
In case of cleaning the receptacle, please dry out the
receptacle immediately after cleaning.
Do not wash cable assembly.
8. Storage of temperature and humidity.
Temperature: Y10 to W40˚C
Humidity : 30-80%RH
!STRESS TO THE CONNECTOR (Fig.1)
!
PATTERN DIMENSION, METAL MUSK PATTERN (Fig. 2)
ABE
C
D
1.Stress to the housing
Stress A and B : 4.9N (0.5kgf) max.
2.Stress to the outer sleeve.
Stress C : 2.94N (0.3kgf) max.
Stress D : 1.96N (0.2kgf) max.
3.Cable pull strength.
Stress E : 4.9N (0.5kgf) max. (for 88, 92, 91 cable)
LAND
ELECTRODE
,,,
,,
,
,,
,
,,,
,,
,,
,,
,,
,,,,
,,
(Through holes)
2 1.9
(2.37) 2.5
1.51.5
1.05 1.05
φ1(3-φ0.6)
5.2
3.8
2.3
1
0.6
0.6
(1.5) (1.74) (1.5)
,,
,,
,,
,,
,,
,
,,
* *
(in mm)
0.451.05
1.5
1.05
0.6
0.6
2.3
3.3
(in mm)
(Note) "Please design I/O pattern so that the impedance
matches 50 ohm including the land pattern.
"The material of P.C.B. is the epoxy resin of glass
fabric base. (
ε
r = 4.8) Thickness is 1.0 mm.
"The solder resist should be printed except for the
land pattern on the P.C.B.
(ii) Metal Musk Pattern
(i) Pattern Dimension
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
Ultra-Miniature SMT GSC Type
COAXIAL CONNECTOR
9
!TOOL (Fig. 3)
!DIMENSIONS OF PLASTIC TAPE (Fig. 5)
3.9T0.6
2.3T0.6 0.5T0.6
45T2
35T27.95T2
(φ8)
(C1)
(in mm)
180 30 60 90 120 150 180
190
200
210
220
230
240
250
260
Time (sec.)
Temperature (˚C)
Solder : Sn 60%-Pb 40%
0
120
20
150
200
220
60Y120sec.
10sec. max.
Time (sec.)
Pre-heating 150T10˚C
Peak temperature 225T5˚C
Temperature (˚C)
20Y40sec. max.
Allowable Temperature and Time of Reflow Soldering
M22001 How to use tool
Reflow Soldering Standard Conditions
• Measuring point of temperature in-out terminals of the device
• Reflow Soldering
• Both convection and infrared rays
• Hot air
• Hot plate
!STANDARD REFLOW SOLDERING CONDITIONS (Fig. 4)
W0.1
0
Hot Terminal
4T0.1 2T0.1
φ1.5
1.25T0.15
0.3T0.05
5.5T0.1 1.75T0.1
12T0.2
8T0.1
3.8T0.1 Feeding direction
3.8T0.1
Tolerances Unless
Otherwise Specified T0.1
(in mm)
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
Miniature SMT FSC Type
COAXIAL CONNECTOR
10
Miniature, Low profile, 3mm height, SMD.
Right angle type receptacle available.
!FEATURES
1. High engagement with new structure (50% up compared
with ESC type).
2. Ultra-miniature (LZWZH : 3.4Z3.4Z1.5mm) for High
density mounting (11.6mm2).
3. Ultra-low profile (3.0mm Max.).
4. High performance. (VSWR 1.2max. at 2GHz).
5. Matched with ultra-thin FEP coaxial cables (0.8mm dia).
6. Mountable by automatic placer.
7. Taping package applicable.
8. SMD and reflow soldering applicable.
!APPLICATIONS
Portable telephone, mobile telephone, cordless telephones,
GPS, and other microwave radio and measurement
equipment.
!PART NUMBER
"Straight receptacle for printed circuit board.
"Right angle receptacle for printed circuit board.
"Right angle cable assembly with flexible cable.
MXFK81------
MXFG76------
"SMA-FSC adapter for receptacle.
MM121454
"SMA-FSC adapter for cable assembly.
MM121460
!DIMENSIONS
!RATING AND CHARACTERISTICS
Part Number
MM7329-2700
MM7329-2700TB1
MM7329-2700TB2
Packaging
Bulk package
178mm Dia. Taping
330mm Dia. Taping
Quantity
Free
1000pcs/reel
4000pcs/reel
Part Number
MM7329-2702
MM7329-2702TB1
MM7329-2702TB2
Packaging
Bulk package
178mm Dia. Taping
330mm Dia. Taping
Quantity
Free
500pcs/reel
2000pcs/reel
Item
Frequency Range
VSWR
Nominal Impedance
Temperature Range
Voltage Rating
Contact Resistance
Withstanding Voltage
Insulation Resistance
Durability
Specification
DC to 3GHz
1.2Max. (DC to 2GHz)11
1.3Max. (2GHz to 3GHz)
50Ω
Y40˚C to W90˚C
250Vrms
15mΩMax.
AC300Vrms
500MΩMin.
50cycles
3 max.
4.2 min.
(in mm)
Clearance for matingProfile
(MM7329-2700)
3 max.
1.5 max.
5 min.
TOOL
M19004
(in mm)
Clearance for matingProfile
(MM7329-2702)
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
Miniature SMT FSC Type
COAXIAL CONNECTOR
11
!DIMENSIONS (MM7329-2700)
!DIMENSIONS (MXFK81------)
!MATERIALS AND FINISH
"MM7329-2700/MM7329-2702
"MXFK81------
MXFG76------
!PART NUMBERING FOR CABLE ASSEMBLY
(Please specify the part number when ordering.)
1Cable assembly
24 Connector code
3Cable code (See cable list on page 23 to 24 for detail.)
(*) Based on Japanese Industrial Standard (JIS).
56 Full length of cable assembly
Length (mm) = 5Z106
Ex. :1500mm =500Z100/5000
Ex. :1000mm =100Z101/1001
!CABLE LENGTH TOLERANCE
,
,
,
,
,
,
,,
,,
,,
,,
3.4
3.4
2.4
1.5
2.4
1
0.5
0.5
,
,
,
,,
,
,
,
,
,
,
,,
,,
,,
,,
,,
(MM7329-2700)
Hot Terminal
Ground Terminal
3.4 3.2
0.2max
0.1max.
0.5 2.4
1.5
2.4 0.4
0.5
0.5
2.9
,,
,,
,,
,,
,,
,,
,,
,,
,,
,,
,,
,,
,,
,,
,
,,,
,,
,,
,
Tolerances Unless
Otherwise Specified
T0.2 (in mm)
(MM7329-2702)
2.4
M
φ2.2 2.4
3.8
(in mm)
Tolerances Unless Otherwise Specified T0.3
Part Name
Center Contact
Outer Contact
Insulator
Materials
Copper Alloy
Copper Alloy
Engineering plastic
Finish
Gold plated
Gold plated
None
MX
(Ex.)
1 2 3 4 5
FK 81 XX 100
6
0
Code
FK
FG
XX
Connector
FSC type Plug connector (for 81 cable)
FSC type Plug connector (for 76 cable)
None
Code
81
76
Cable
0.4D (*)
0.8D (*)
Outer
Diameter
0.8mm
1.25mm
Outer conductor
construction
Single shield
Single shield
Insulation
material
FEP
FEP
Minimum
Bending radius
4.8mm
6mm
Part Name
Center Contact
Outer Contact
Insulator
Materials
Copper Alloy
Copper Alloy
Engineering plastic
Finish
Gold plated
Gold plated
None
L
Over
1140
1100
1500
1000
Till
1100
1500
1000
Y
Dimensional
tolerance (mm)
T13
T14
T10
W2% of L
Y0% of L
*L must be 20mm Min.
Cable Length L (mm) (*)
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
Miniature SMT FSC Type
COAXIAL CONNECTOR
12
!SMA-FSC ADAPTERS
5.08 4.4
2.5
1.33
13.93
φ5.33
2.5
φ2.16
φ5.33
SMA-JACK
0.76
SMA-JACK
5.08 1.48
8.64
14.06
φ5.33
φ3.1
φ5.33
(in mm)
(in mm)
MM121454 (For FSC type receptacle)
MM121460 (For FSC type cable assembly)
!NOTICE
Disaccord with following notes could give mechanical damage
and/or poor electrical performance.
1. Mechanical Stress :
Stress to the connector should be limited as shown Fig.1.
2. PCB mount pattern dimension :
Dimensions shown in Fig. 2 should be used for the PCB
design.
3. Disengagement and engagement.
Use tool P/N M19000 or M19004 (Fig.3). The connector to
be disengaged and engaged should be pulled out or insert
to the vertical direction using the tool. Do not try to pull out
by the cable, because there is the possibility a wire breaks.
4. Cable and connector handling :
Do not give a twisted torque to the cable and connector.
5. Reflow soldering condition :
Reflow soldering should be carried out according to
condition as shown in Fig.4.
And the eutectic solder should be used.
6. When MM7329-2700/MM7329-2702 was soldered on
P.C.B.,
•Use Rosin based flux, but not with strong acid flux
(Chlorine content should be less than 0.20wt%).
•Flux should be cleaned thoroughly.
7. Washing :
In case of cleaning the receptacle, please dry out the
receptacle immediately after cleaning.
Do not wash cable assembly.
8. Storage of temperature and humidity.
Temperature: Y10 to W40˚C
Humidity : 30-80%RH
!STRESS TO THE CONNECTOR (Fig.1)
,
,,,
,,
@
@@@
@@
À
ÀÀÀ
ÀÀ
,
,,,
,,
@
@@@
@@
À
ÀÀÀ
ÀÀ
,
,,,
,,
@
@@@
@@
À
ÀÀÀ
ÀÀ
,
,,,
,,
@
@@@
@@
À
ÀÀÀ
ÀÀ
,
,,,
,,
Q
QQQ
QQ
¢
¢¢¢
¢¢
B
AE
CD
,,
,,,
,
@@
@@@
@
ÀÀ
ÀÀÀ
À
,,
,,,
,
@@
@@@
@
ÀÀ
ÀÀÀ
À
,,
,,,
,
@@
@@@
@
ÀÀ
ÀÀÀ
À
,,
,,,
,
@@
@@@
@
ÀÀ
ÀÀÀ
À
,,
,,,
,
QQ
QQQ
Q
¢¢
¢¢¢
¢
,
,
@
@
À
À
,
,
@
@
À
À
,
,
@
@
À
À
,
,
@
@
À
À
,
,
Q
Q
¢
¢
B
E
D C
A
1. Stress to the housing
Stress A and B : 4.9N (0.5kgf) max.
2. Stress to the outer sleeve.
Stress C : 2.94N (0.3kgf) max.
Stress D : 1.96N (0.2kgf) max.
3. Cable pull strength.
Stress E : 4.9N (0.5kgf) max. (for 81 cable)
Stress E : 7.84N (0.8kgf) max. (for 76 cable)
(MM7329-2702)
(MM7329-2700)
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
Miniature SMT FSC Type
COAXIAL CONNECTOR
13
!PATTERN DIMENSION (Fig. 2)
!TOOL (Fig. 3)
,,
,,,,
,
,,
,,
,,
,
,,
,,,
0.6
φ0.6
1
2.52.57
3.4
0.9
2.4
3.4
4.2
5.2
(1.5) (1.5)
(1.74) *
*
,,
,,
,,
,,
,,
,,
,,
,,
,,
(Note) "Please design I/O pattern*so that the impedance matches 50 ohm including the land pattern.
"The material of P.C.B. is the epoxy resin of glass fabric base. (
ε
r = 4.8) Thickness is 1.0 mm.
"The solder resist should be printed except for the land pattern on the P.C.B.
(MM7329-2700)
,
,,,
,,
,
,,
,,
,
,,
,,,
5.2
4.2
2.4
1
0.6
φ0.6
1.2
2.4
0.3
1.7
0.5
2.5
(1.74)
(1.5)*(1.5)*
,
,
,,
,,
,,
,,
(in mm)
(MM7329-2702)
LAND
ELECTRODE
,,
,,
5T0.6
5T0.6
20T2
5T1
0.5T0.62T0.6
3.5T0.6
φ2.7T1
45T2
(10)
(3)
(105) M19004
(in mm)
M19000 (for MM7329-2700)
(in mm)
M19004 (for MM7329-2702)
How to use tool (for MM7329-2700)
How to use tool (for MM7329-2702)
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
Miniature SMT FSC Type
COAXIAL CONNECTOR
14
!DIMENSIONS OF PLASTIC TAPE (Fig. 5)
!STANDARD REFLOW SOLDERING CONDITIONS (Fig. 4)
180 30 60 90 120 150 180
190
200
210
220
230
240
250
260
Time (sec.)
Temperature (˚C)
Solder : Sn 60%-Pb 40%
0
120
20
150
200
220
60Y120sec.
10sec. max.
Time (sec.)
Pre-heating 150T10˚C
Peak temperature 225T5˚C
Temperature (˚C)
20Y40sec. max.
Allowable Temperature and Time of Reflow Soldering Reflow Soldering Standard Conditions
• Measuring point of temperature in-out terminals of the device
• Reflow Soldering
• Both convection and infrared rays
• Hot air
• Hot plate
φ1.5T0.1
Hot Terminal
4T0.1
8T0.1
2T0.1
5.5T0.1 1.75T0.1
φ1.5 min.
12T0.2
3.8T0.1
3.8T0.1
0.3T0.05
1.92T0.15
Feeding direction
φ1.5T0.1
Hot Terminal 4T0.1
8T0.1
3.9T0.1
2T0.1
5.5T0.1 1.75T0.1
12T0.2
Feeding direction
3.7T0.1
0.3T0.05
3.3T0.15
(in mm)
(in mm)
(MM7329-2700)
(MM7329-2702)
SMT CCR Type
COAXIAL CONNECTOR
15
4.2mm height, SMD.
Strong Engage Force.
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
!FEATURES
1. Ultra-miniature and low profile. (4.2mm Max.)
2. SMD and reflow soldering applicable.
3. Taping package applicable.
4. Mountable by automatic placer.
5. High performance. (VSWR 1.2 Max. at 2GHz)
6. Available for ultra-thin coaxial cables.
!APPLICATIONS
Portable telephones, mobile telephones, cordless telephones,
GPS, and other microwave radio and measurement
equipment.
!PART NUMBER
"Straight receptacle for printed circuit board.
"Right angle cable assembly with flexible cable.
MXSG63------
"SMA-CCR adapter for receptacle
MM121390
"SMA-CCR adapter for cable assembly
MM121400
!RATING AND CHARACTERISTICS
!DIMENSIONS
!DIMENSIONS (MM4329-2700)
!DIMENSIONS (MXSG63------)
Part Number
MM4329-2700
MM4329-2700TB1
MM4329-2700TB2
Packaging
Bulk package
178mm Dia. Taping
330mm Dia. Taping
Quantity
Free
500pcs/reel
3000pcs/reel
Item
Frequency Range
VSWR
Nominal Impedance
Temperature Range
Voltage Rating
Insulation Resistance
Contact Resistance
Withstanding Voltage
Durability
Specification
DC to 2GHz
1.2Max.
50Ω
Y40˚C to W90˚C
250Vrms
500MΩMin.
15mΩMax.
AC300Vrms
50cycles
4.5T0.2
(5.0)
4.0T0.2 2.15T0.2
1 : Earth terminal
2 : Dummy terminal
3 : Hot terminal
φ2.64W0.1
Y0.2
1.0T0.2
(1.25)
1.0T0.2
(4.5)
(3.0)
1
3
2
2
Profile
4.2 mm
max.
Clearance
5.3 mm
min.
Printed circuit
(3.1) (3.1)
(φ2.76)
(6.35)
M
Clearance for matingProfile
(in mm)
(in mm)
(in mm)
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
SMT CCR Type
COAXIAL CONNECTOR
16
!MATERIALS AND FINISH
"MM4329-2700
!PART NUMBERING FOR CABLE ASSEMBLY
(Please specify the part number when ordering.)
1Cable assembly
24 Connector code
3Cable code (See cable list on page 23 to 24 for detail.)
(*) Based on Japanese Industrial Standard (JIS).
56 Full length of cable assembly
Length (mm) = 5Z106
Ex. :1500mm =500Z100/5000
Ex. :1000mm =100Z101/1001
!SMA-CCR ADAPTERS
"MXSG63------
!CABLE LENGTH TOLERANCE
Part Name
Center Contact
Outer Contact
Insulator
Materials
Stainless Steel
Stainless Steel
Polyphenylene Sulfide
Finish
Gold plated
Gold plated
None
Code
SG
XX
Connector
CCR type Plug connector
None
Code
63
75
Cable
0.8D (*)
0.8D (*)
Outer
Diameter
2.0
mm
1.5
mm
Outer conductor
construction
Single shield
Double shield
Insulation
material
Cross-linked
Polyethylene
FEP
Minimum
Bending radius
8mm
8mm
MX
(Ex.)
1 2 3 4 5
SG 63 XX 100
6
0
L
Part Name
Center Contact
Outer Contact
Insulator
Materials
Beryllium Copper
Phosphor Bronze
Fiber Reinforced Polypropylene
Finish
Gold plated
Gold plated and Nickel plated
None
Over
1150
1100
1500
1000
till
1100
1500
1000
Y
Dimensional
tolerance (mm)
T13
T14
T10
W2% or L
Y0% or L
*L must be 50mm Min.
Cable length L (mm) (*)
15.4T0.2
4.0T0.2 (3.02)5.08T0.5
SMA-JACK
HEX6.35
15.1T0.2
4.0T0.2 (3.02)5.08T0.5
SMA-JACK
HEX6.35
MM121390 (For CCR type receptacle) MM121400(For CCR type cable assembly)
(in mm) (in mm)
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
SMT CCR Type
COAXIAL CONNECTOR
17
!NOTICE
Disaccord with following notes could give mechanical
damage and/or poor electrical performance.
1. Mechanical Stress :
Stress to the connector should be limited as shown Fig.1.
2. PCB mount pattern dimension :
Dimensions shown in Fig.2 and Fig. 3 should be used for
the PCB design.
3. Engagement :
Insertion should be made straight to the axis of the
connector.
4. Disengagement :
Use tool P/N M17000. The connector to be disengaged
should be pulled out to the vertical direction. Do not try to
pull out by the cable.
5. Cable and connector handling :
Do not give a twisted torque to the cable and connector.
6. Reflow soldering condition :
Reflow soldering conditions should be used as shown Fig.5.
And the eutectic solder should be used.
7. When MM4329-2700 was soldered on P.C.B.,
•Use Rosin based flux, but not with strong acid flux
(Chlorine content should be less than 0.20wt%).
•Flux should be cleaned thoroughly.
8. Washing :
In case of cleaning the receptacle, please dry out the
receptacle immediately after cleaning.
Do not wash cable assembly.
9. Storage of temperature and humidity.
Temperature: Y10 to W40˚C
Humidity : 30-80%RH
!PATTERN DIMENSION (Fig. 2)
!STRESS TO THE CONNECTOR (Fig. 1)
!PATTERN DIMENSION (Fig. 3)
4.0
ABE
4.5
D C
1. Stress to the housing
Stress A and B : 9.8N (1kgf) Max.
2. Stress to the outer sleeve.
Stress C : 2.94N (0.3kgf) Max.
Stress D : 1.96N (0.2kgf) Max.
3. Cable pull strength.
Stress E : 14.7N (1.5kgf) Max.
(in mm)
,
,,,
,,,,,
,,,,,,
,,,,
,,
3.0 1.51.5 1.2
1.2L1(L2) L1(L2)
1.3
3.25
1.2
2.5 2.02.0
,,
,,
,,
,,
,,
,,
,,
,,
,,
,,
: LAND
: ELECTRODE
,
,,
,
,,
Thickness of P.C.B. (mm)
0.8
1.0
1.2
1.6
2.0
L1 (mm)
0.47
0.31
0.25
0.21
0.20
L2 (mm)
0.14
0.15
0.16
0.16
0.16
•L1 is for the P.C.B. which has the earth pattern in the opposite side.
•L2 is for the P.C.B. which doesn't have the earth pattern in the
opposite side
•The material of P.C.B. is the epoxy resin of glass fabric base.
(
ε
r = 4.8)
•
The solder resist should be printed except for the land pattern
on the P.C.B.
For the coplaner line
(in mm)
: LAND
: ELECTRODE
,,,
,,,,
,,,,
,,,
,,
,,
7.0
6.0
3.0
3-φ1Through Hole 1.2
B
A
3.25 3.25 0.5
1.251.2
0.6 1.2
,
,,
,
,,
,
,,
,,
,,
,,
,,
,
,,
Thickness of P.C.B. (mm)
0.8
1.0
1.2
1.6
2.0
A (mm)
2.14
1.82
1.71
1.62
1.59
B (mm)
1.44
1.80
2.16
2.88
3.60
•The material of P.C.B. is the epoxy resin of glass fabric base.
(
ε
r = 4.8)
•
The solder resist should be printed except for the land pattern
on the P.C.B.
For the microstrip line
(in mm)
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
SMT CCR Type
COAXIAL CONNECTOR
18
!DISENGAGEMENT TOOL (Fig. 4)
!DIMENSIONS OF PLASTIC TAPE (Fig. 6)
(5.0)
(45.0)
(6.0)
(5.0)
(in mm)
Within 20 sec.60sec. min.
200
150
100
235T5˚C
Pre-heating 150T10˚C
Temperature (˚C)
How to use disengagement toolM17000
!STANDARD REFLOW SOLDERING CONDITIONS (Fig. 5)
0.3
2.6T0.1
Feeding direction
*5.7
*1.4
*5.2
*1.4
*4.2
*4.7
φ1.5 min. φ1.5
2T0.1 4T0.1
8T0.1
5.5T0.1
12T0.2
1.75T0.1
W0.1
Y0.1
Hot terminal side
Earth terminal side
(in mm)
*mark (6 points) are the bottom dimensions of the cavity.
Direction of terminal
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
Coaxial Connector BFA Type
COAXIAL CONNECTOR
19
Discrete type. Easily Handling.
Strong Engage Force.
!FEATURES
1. Ultra-miniature and low profile (6.3mm Max.)
2. High performance (VSWR 1.2Max. at 4GHz)
3. Very reasonable price for commercial applications.
4. Cable assembly applicable.
5. Low RF leakage
6. Available for ultra-thin coaxial cables.
!APPLICATIONS
Portable telephones, mobile telephones, cordless telephones,
oscilloscope, GPS, and any other R.F. circuits for microwave
equipment.
!PART NUMBER
!PART NUMBERING FOR CABLE ASSEMBLY
(Please specify the part number when ordering.)
1Cable assembly
24 Connector code
3Cable code (See cable list on page 23 to 24 for detail.)
(*) Based on Japanese Industrial Standard (JIS).
56 Full length of cable assembly
Length (mm) = 5Z106
Ex. :1100mm =100Z100/1000
Ex. :1500mm =500Z100/5000
Ex. :1000mm =100Z101/1001
!DIMENSIONS
!CABLE LENGTH TOLERANCE
Part Number
MM3325-2505
MM3325-2507
MM3326-2506
MXYH--------
Description
Straight receptacle used on
printed circuit board
Straight receptacle with
insulation spacer used on
printed circuit board
Right angle receptacle used
on printed circuit board
Right angle cable assembly
with flexible cable
Contact
Male
Male
Male
Female
Code
YH
XX
Connector
BFA type Plug connector
None
Code
62
63
75
Cable
0.8D (*)
0.8D (*)
0.8D (*)
Outer
Diameter
2.5
mm
2.0
mm
1.5
mm
Outer conductor
construction
Double shield
Single shield
Double shield
Insulation
material
Cross-linked
Polyethylene
Cross-linked
Polyethylene
FEP
Minimum
Bending radius
10mm
8mm
8mm
MX
(Ex.)
1 2 3 4 5
YH 62 XX 200
6
0
Profile
6.3 mm
max. Coaxial cable
Printed circuit
Clearance
8.5 mm
min. Coaxial cable
Printed circuit
(in mm)
Profile Clearance for mating
L
Over
1150
1100
1500
1000
Till
1100
1500
1000
Y
Dimensional
tolerance (mm)
T13
T14
T10
W2% of L
Y0% of L
*L must be 50mm Min.
Cable length L (mm) (*)
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
Coaxial Connector BFA Type
COAXIAL CONNECTOR
20
!RATING AND CHARACTERISTICS
!MATERIALS AND FINISH
!VSWR TYPICAL DATA
!R.F. LEAKAGE TYPICAL DATA
!DIMENSIONS (MM3325-2505)
!DIMENSIONS (MM3325-2507)
!DIMENSIONS (MM3326-2506)
!DIMENSIONS (MXYH--------)
Item
Voltage Rating
Frequency Rating and
VSWR
Nominal Impedance
Temperature Range
Insulation Resistance
Contact Resistance
Withstanding Voltage
Durability
Specification
250Vrms
DC to 4GHz
1.2 Max.
DC to 2GHz
1.2 Max.
(MM3326-2506)
50Ω
Y40˚C to W90˚C
1000MΩMin.
10mΩMax.
AC300Vrms
50 cycles
0
1.0
1.2
1.4
1.6
1.8
2.0
2 4 6 8
Specification
Frequency (GHz)
VSWR
MM3325-2505WMXYH--------
0
-80
-60
-40
-20
0
400 800 1200 1600 2000
Frequency (MHz)
RF LEAK (dB)
RF LEAK (dB)
0
-80
-60
-40
-20
0
400 800 1200 1600 2000
Frequency (MHz)
MM3325-2505WMXYH--------
Electrical leakage Magnetic leakage
Part Name
Center Contact
Outer Contact
Insulator
Insulation Plate
Spacer (MM3325-2507)
Outer Sleeve
Materials
Beryllium copper or Brass
Phosper bronze
Poly-phenylene Sulfide
Poly-butylen terephthalate
TFE Fluorocarbon
Brass
Finish
Gold plated
Silver plated and
Nickel plated
None
None
None
Zinc plated
(0.25) φ0.5T0.1
φ2.58T0.15
3T0.4 3.25T0.3
(1.5)
(6.25)
3.75T0.5
4.4T0.5
1T0.2
Bottom view
(in mm)
(in mm)
(in mm)
(in mm)
φ2.58T0.15
φ0.5T0.1
3.75T0.5
4.4T0.5
(0.25)
0.5T0.1
3.25T0.3 3T0.4
(6.25)
(1.5) 1T0.2
φ6.5T0.4
φ2.58T0.15
φ0.5T0.1
5T0.3
(6.29)
3T0.5
1T0.2 (
3Points)
4.29T0.2
8.3T0.5
5 max.
(φ3.14)
(5.25)
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
Coaxial Connector BFA Type
COAXIAL CONNECTOR
21
!NOTICE
If this notice is not kept, it has possible that the mating portion
or the cable cramping portion is destroyed.
1. P.C.B. mount pattern dimension :
Dimensions shown in Fig. 1 and Fig. 2 should be used for
the P.C.B. design.
2. Stress limit to the connector :
When connected, stress to the connector should be limited
as show Fig.3.
3. Insertion should be made straight to the axis of the
connector.
4. Disengagement :
Use tool P/N M16000 or M16001. The connector to be
disengaged should be pulled out to the vertical direction.
Do not try to pull out by the cable.
5. Cable and connector handling :
Do not give a twisted torque to the cable and connector.
6. When MM3325-2505, MM3325-2507 and MM3326-2506
were soldered on P.C.B.,
•Use Rosin based flux, but not strong acid flux
(with chlorine content exceeding 0.20wt%).
•Flux should not be left inside of product.
7. Washing :
In case of cleaning the receptacle, please dry out the
receptacle immediately after cleaning.
Do not wash cable assembly.
8. Storage of product
Temperature: Y10 to W40˚C
Humidity : 30 - 80%RH
!MOUNTING DIMENSION (Fig. 1)
!MOUNTING DIMENSION (Fig. 2)
!STRESS TO THE CONNECTOR (Fig. 3)
!
HOW TO USE DISENGAGEMENT TOOLS (Fig. 4)
MM3326-2506
(1.75)
φ0.7T0.05
2-φ1.2T0.1
3.5T0.1
(in mm)
(in mm)
φ0.7T0.05
3-φ1.2T0.1
1.75T0.1
120˚T2˚
MM3325-2505, MM3325-2507
A
B
C
D
1. Stress to the housing.
Stress A : 9.8N (1kgf) Max.
2. Stress to the outer sleeve.
Stress B : 4.9N (0.5kgf) Max.
Stress C : 2.94N (0.3kgf) Max.
3. Stress to the cable.
Stress D : 9.8N (1kgf)Max.
M16001
7mm min.
3mm min.
M16001 allows a narrower space (3mm) between the connector and
adjacent obstacle. See Fig. 5 for the detail.
M16000
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
Coaxial Connector BFA Type
COAXIAL CONNECTOR
22
!DISENGAGEMENT TOOLS (Fig. 5)
!SMA-BFA ADAPTERS (Fig. 6)
(3.2)
(6.2)
3.4T0.15 0.95T0.1
4.5T0.5
(3)
(43)
(1.2)
(6)
(φ3)
0.85T0.1
(45)
(5)
(2)
(2.5)
3.95T0.1
3.3T0.1
(6)
(φ3)
(in mm)
(in mm) (in mm)
(in mm) (in mm)
(in mm)
M16001M16000
(18)
BFA-FEMALE SMA-JACK
φ4.7T0.2
15T0.5
31.5T0.85
(18)
BFA-FEMALE
HEX8
SMA-PLUG
φ4.7T0.2
15T0.5
(35)
MM121352 (For BFA type receptacle) MM121372 (For BFA type receptacle)
BFA-MALE SMA-JACK
18.6T0.4
BFA-MALE
HEX8
SMA-PLUG
(22.5)
MM121360 (For BFA type cable assembly) MM121380 (For BFA type cable assembly)
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
Miniaturized micro wave coaxial connector Cable list
COAXIAL CONNECTOR
23
76
Silver coated copper
covered steel wire
1/0.26
0.26
FEP
285
0.8
Tin plated copper wire
00.5
1.05
FEP
0.1
Gray
1.24
6
50
300 Vrms Max.
100
1.56
2.3
2.9
3.5
Not Suitable
Not Suitable
Suitable
Not Suitable
75
Silver coated copper
covered steel wire
1/0.26
0.26
FEP
285
0.8
Tin plated copper wire
00.5
Inner 1.05 Outer 1.3
FEP
0.1
Gray
1.5
8
50
300 Vrms Max.
100
1.56
2.3
2.9
3.5
Suitable
Suitable
Not Suitable
Not Suitable
62
copper covered steel
wire
1/0.26
0.26
Cross linked polyethylene
compound
230
0.8
Bare copper wire
0.1
Inner 1.3 Outer 1.8
Polyvinyl chloride
compound
0.35
Gray
2.5
10
50
300 Vrms Max.
100
1.6
2.3
2.8
3.2
Suitable
Not Suitable
Not Suitable
Not Suitable
0.8D double shield
Cross linked
polyethylene cable
0.8D single shield
Cross linked
polyethylene cable
0.8D double shield
FEP cable 0.8D single shield
FEP cable
Y
(No./mm)
(mm)
Y
Degree C
(mm)
Y
(mm)
(mm)
Y
(mm)
Y
(mm)
(mm)
(Ohm)
(pF/m)
Material
No. and Dia.
Total Dia.
Material
Total Dia.
Material
Dia. of wire
Total Dia.
Material
Nominal thickness
Color
dB/m at 1GHz
dB/m at 2GHz
dB/m at 3GHz
dB/m at 4GHz
dB/m at 6GHz
Nominal
Insertion loss
Overall Dia.
Minimum bending radius
Nominal impedance
Continuous operating voltage
Nominal static capacitance
Sheath
Outer
conductor
Insulator
Inner
conductor
Murata cable code
Assembly to BFA
Assembly to CCR
Assembly to FSC
Assembly to GSC
63
copper covered steel
wire
1/0.26
0.26
Cross linked polyethylene
compound
230
0.8
Bare copper wire
0.1
1.3
Polyvinyl chloride
compound
0.35
Gray
2
8
50
300 Vrms Max.
100
1.6
2.3
2.8
3.2
Suitable
Suitable
Not Suitable
Not Suitable
Melting point
(Reference only)
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
Miniaturized micro wave coaxial connector Cable list
COAXIAL CONNECTOR
24
92
Silver coated copper
covered alloy wire
7/0.05
0.15
PFA
302 Y310
0.4
Tin plated copper wire
0.05
0.65
PFA
0.075
White
0.8
3.3
50
300 Vrms Max.
100
3
4.26
5.24
6.18
9.17
Not Suitable
Not Suitable
Suitable
Suitable
91
Silver coated copper
covered steel wire
1/0.162
0.162
PTFE
327
0.52
Solder plated copper wir
e
Y
0.62
Y
Y
Y
0.62
3.2
50
300 Vrms Max.
100
2.3
3.2
3.9
4.900 (5GHz)
Not Suitable
Not Suitable
Suitable
Suitable
81
Silver coated copper
covered alloy wire
7/0.05
0.15
FEP
250
0.4
Tin plated copper wire
0.05
0.65
FEP
0.05
White
0.8
4.8
50
300 Vrms Max.
100
3
4.26
5.24
6.18
Not Suitable
Not Suitable
Suitable
Suitable
0.4D single shield
FEP cable 0.4D single shield
PFA cable 0.52D
Semi rigid Cable 0.4D single shield
PFA cable
Y
(No./mm)
(mm)
Y
Degree C
(mm)
Y
(mm)
(mm)
Y
(mm)
Y
(mm)
(mm)
(Ohm)
(pF/m)
Material
No. and Dia.
Total Dia.
Material
Total Dia.
Material
Dia. of wire
Total Dia.
Material
Nominal thickness
Color
dB/m at 1GHz
dB/m at 2GHz
dB/m at 3GHz
dB/m at 4GHz
dB/m at 6GHz
Nominal
Insertion loss
Overall Dia.
Minimum bending radius
Nominal impedance
Continuous operating voltage
Nominal static capacitance
Sheath
Outer
conductor
Insulator
Inner
conductor
Murata cable code
Assembly to BFA
Assembly to CCR
Assembly to FSC
Assembly to GSC
88
Silver coated copper
covered steel wire
1/0.15
0.15
PFA
302 Y310
0.43
Tin plated copper wire
0.05
0.68
PFA
0.075
White
0.83
3.3
50
300 Vrms Max.
100
2.89
4.28
5.39
6.44
8.4
Not Suitable
Not Suitable
Suitable
Suitable
Melting point
(Reference only)
No.O30E3.pdf 00.4.11This is the PDF file of catalog No.O30E-3.
Note:
1. Export Control
<
For customers outside Japan
>
Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive
weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons.
<
For customers in Japan
>
For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required
for export.
2. Please contact our sales representatives or product engineers before using our products listed in this catalog for the applications listed below which require
especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property, or when intending to use one
of our products for other applications than specified in this catalog.
qAircraft equipment
wAerospace equipment
eUndersea equipment
rMedical equipment
tTransportation equipment (vehicles, trains, ships,etc.)
yTraffic signal equipment
uDisaster prevention / crime prevention equipment
iData-processing equipment
oApplication of similar complexity and/or reliability requirements to the applications listed in the above
3. Product specifications in this catalog are as of September 1999. They are subject to change or our products in it may be discontinued without advance notice.
Please check with our sales representatives or product engineers before your ordering. If there are any questions, please contact our sales representatives or
product engineers.
4. The parts numbers and specifications listed in this catalog are for information only. You are requested to approve our product specification or to transact the
approval sheet for product specification, before your ordering.
5. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect
of our and/or third party's intellectual property rights and other related rights in consideration of your using our products and/or information described or
contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned
above under licenses without our consent.
6. None of ozone depleting substances (ODS) under the Montreal Protocol is used in manufacturing process of us.
International Division
3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan
Phone:81-3-5469-6123 Fax:81-3-5469-6155 E-mail:intl@murata.co.jp
Head Office
2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone:81-75-955-6502
http://www.murata.co.jp/products/
