Surface Mount Voltage Controlled Oscillator 5V Tuning for PLL IC's JTOS-100P+ 48 to 59 MHz Features * low phase noise * 5V tuning voltage range * linear tuning characteristics * aqueous washable CASE STYLE: BK377 PRICE: $14.95 ea. QTY (5-49) Applications +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications * PLL circuitry * measurement instrumentation * frequency synthesizers Electrical Specifications FREQUENCY POWER TUNING (MHz) OUTPUT VOLTAGE (dBm) (V) PHASE NOISE (dBc/Hz) SSB at offset frequencies: Typ. Min. Max. Typ. Min. Max. 1 kHz 10 kHz 100 kHz 1 MHz 48 59 +9 0.5 5.0 -83 -108 -128 -140 PULLING PUSHING TUNING HARMONICS 3 dB pk-pk (MHz/V) SENSITIVITY (dBc) MODULATION @ 12 dBr (MHz/V) BANDWIDTH (MHz) (MHz) Typ. Typ. Typ. Typ. Max. Typ. Voltage (V) Current (mA) Max. 0.6 0.2 3.5-4 -30 -20 0.1 12 18 Pin Connections Maximum Ratings RF OUT 13 VCC V-TUNE GROUND POWER SUPPLY Operating Temperature 2 Storage Temperature 5 Absolute Max. Supply Voltage (Vcc) 1,3,4,6,7,8,9,10,11,12,14 -55C to 85C -55C to 100C Absolute Max. Tuning Voltage (Vtune) +16V +7V all specifications: 50 ohm system Permanent damage may occur if any of these limits are exceeded. Outline Drawing Demo Board MCL P/N: TB-04 Suggested PCB Layout (PL-005) PCB Land Pattern Suggested Layout, Tolerance to be within .002 Outline Dimensions ( inch mm ) A .505 12.83 B .800 20.32 C --- D .100 2.54 E .250 6.35 F .100 2.54 G .100 2.54 H .047 1.19 J .065 1.65 K .065 1.65 L wt .525 grams 13.34 3.0 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit's applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, "Standard Terms"); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits' website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits (R) www.minicircuits.com P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. B M137599 JTOS-100P+ FL/TD/CP/AM 120621 Page 1 of 2 JTOS-100P+ Performance Data & Curves Frequency (MHz) +25C +85C T SENS. 10 60 50 8 40 6 30 4 20 Tuning Sensitivity (MHz/V) -55C 70 2 10 0 1 2 3 Tuning Voltage (V) 4 5 V TUNE JTOS-100P Harmonics Level -10 Harmonics (dBc) F2 F3 F4 -20 -30 -40 -50 -60 0 1 2 3 Tuning Voltage (V) 0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 4 5 0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 FREQUENCY (MHz) POWER OUTPUT (dBm) -55C +25C +85C -55C +25C +85C 43.34 45.64 47.75 49.80 52.13 54.35 56.37 58.30 60.19 62.07 63.98 41.46 44.35 46.87 49.15 51.45 53.69 55.73 57.68 59.59 61.49 63.41 40.21 43.52 46.32 48.75 51.10 53.32 55.34 57.28 59.18 61.06 62.97 6.74 7.91 8.81 9.09 9.08 9.08 9.02 8.98 8.93 8.88 8.82 6.13 7.47 8.88 9.22 9.13 9.09 9.04 8.98 8.95 8.90 8.86 5.35 6.96 8.52 8.91 8.86 8.84 8.80 8.77 8.73 8.70 8.66 HARMONICS (dBc) F2 F3 F4 -32.96 -31.13 -29.85 -35.52 -33.60 -33.73 -34.02 -34.13 -34.43 -34.71 -34.84 -33.12 -34.63 -37.02 -37.86 -37.60 -37.06 -36.35 -35.96 -35.43 -34.88 -34.17 -41.12 -42.80 -45.35 -44.86 -43.10 -41.89 -41.52 -40.63 -40.10 -39.71 -39.17 JTOS-100P Power Output 12 -55C Output Power (dBm) 12 80 TUNING SENS. (MHz/V) 5.93 5.63 4.88 4.47 4.68 4.35 4.02 3.87 3.80 3.79 3.84 +85C 8 6 0 1 FREQ. PUSHING (MHz/V) 0.06 0.13 0.19 0.26 0.26 0.26 0.19 0.19 0.19 0.13 0.06 +25C 10 4 2 3 Tuning Voltage (V) 4 5 JTOS-100P Frequency Pushing (Supply Voltage 12V) 0.3 Pushing (MHz/V) V TUNE JTOS-100P Frequency and Tuning Sensitivity (at +25C) 0.2 0.1 0.0 0 1 2 3 Tuning Voltage (V) 4 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit's applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, "Standard Terms"); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits' website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits (R) www.minicircuits.com P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 2