FREQUENCY
(MHz)
POWER
OUTPUT
(dBm)
TUNING
VOLTAGE
(V)
PHASE NOISE
(dBc/Hz)
SSB at offset frequencies:
Typ.
PULLING
pk-pk
@ 12 dBr
(MHz)
PUSHING
(MHz/V)
TUNING
SENSITIVITY
(MHz/V)
HARMONICS
(dBc)
3 dB
MODULATION
BANDWIDTH
(MHz)
POWER
SUPPLY
Voltage
(V)
Current
(mA)
Max.Min. Max. Typ. Min. Max.
1
kHz
10
kHz
100
kHz
1
MHz Typ. Typ. Typ. Typ. Max. Typ.
48 59 +9 0.5 5.0 -83 -108 -128 -140 0.6 0.2 3.5-4 -30 -20 0.1 12 18
Notes
A.
Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B.
Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C.
The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Surface Mount
Maximum Ratings
Operating Temperature -55°C to 85°C
Storage Temperature -55°C to 100°C
Absolute Max. Supply Voltage (Vcc) +16V
Absolute Max. Tuning Voltage (Vtune) +7V
RF OUT 13
VCC 2
V-TUNE 5
GROUND 1,3,4,6,7,8,9,10,11,12,14
Pin Connections
Electrical Specifi cations
REV. B
M137599
JTOS-100P+
FL/TD/CP/AM
120621
Page 1 of 2
Outline Dimensions ( )
inch
mm
Outline Drawing
Demo Board MCL P/N: TB-04
Suggested PCB Layout (PL-005)
Voltage Controlled Oscillator
5V Tuning for PLL IC’s 48 to 59 MHz
Features
• low phase noise
• 5V tuning voltage range
• linear tuning characteristics
• aqueous washable
Applications
• PLL circuitry
• measurement instrumentation
• frequency synthesizers
PCB Land Pattern
Suggested Layout,
Tolerance to be within ±.002
ABCD E FGH J K L wt
.505 .800 -- .100 .250 .100 .100 .047 .065 .065 .525 grams
12.83 20.32 -- 2.54 6.35 2.54 2.54 1.19 1.65 1.65 13.34 3.0
all specifi cations: 50 ohm system
Permanent damage may occur if any of these limits are exceeded.
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
JTOS-100P+
CASE STYLE: BK377
PRICE: $14.95 ea. QTY (5-49)
V
TUNE
HARMONICS (dBc) FREQ. PUSHING
(MHz/V)
F2 F3 F4
V
TUNE
TUNING
SENS.
(MHz/V)
FREQUENCY (MHz) POWER OUTPUT (dBm)
-55°C +25°C +85°C -55°C +25°C +85°C
Performance Data & Curves
JTOS-100P
Frequency and Tuning Sensitivity (at +25°C)
10
20
30
40
50
60
70
80
012345
Tuning Voltage (V)
Frequency (MHz)
2
4
6
8
10
12
Tuning Sensitivity
(MHz/V)
-55°C +25°C +85°C T SENS.
JTOS-100P
Harmonics Level
-60
-50
-40
-30
-20
-10
012345
Tuning Voltage (V)
Harmonics (dBc)
F2 F3 F4
JTOS-100P
Power Output
4
6
8
10
12
012345
Tuning Voltage (V)
Output Power (dBm)
-55°C +25°C +85°C
JTOS-100P
Frequency Pushing
(Supply Voltage 12V)
0.0
0.1
0.2
0.3
012345
Tuning Voltage (V)
Pushing (MHz/V)
0.00 5.93 43.34 41.46 40.21 6.74 6.13 5.35
0.50 5.63 45.64 44.35 43.52 7.91 7.47 6.96
1.00 4.88 47.75 46.87 46.32 8.81 8.88 8.52
1.50 4.47 49.80 49.15 48.75 9.09 9.22 8.91
2.00 4.68 52.13 51.45 51.10 9.08 9.13 8.86
2.50 4.35 54.35 53.69 53.32 9.08 9.09 8.84
3.00 4.02 56.37 55.73 55.34 9.02 9.04 8.80
3.50 3.87 58.30 57.68 57.28 8.98 8.98 8.77
4.00 3.80 60.19 59.59 59.18 8.93 8.95 8.73
4.50 3.79 62.07 61.49 61.06 8.88 8.90 8.70
5.00 3.84 63.98 63.41 62.97 8.82 8.86 8.66
0.00 -32.96 -33.12 -41.12 0.06
0.50 -31.13 -34.63 -42.80 0.13
1.00 -29.85 -37.02 -45.35 0.19
1.50 -35.52 -37.86 -44.86 0.26
2.00 -33.60 -37.60 -43.10 0.26
2.50 -33.73 -37.06 -41.89 0.26
3.00 -34.02 -36.35 -41.52 0.19
3.50 -34.13 -35.96 -40.63 0.19
4.00 -34.43 -35.43 -40.10 0.19
4.50 -34.71 -34.88 -39.71 0.13
5.00 -34.84 -34.17 -39.17 0.06
Notes
A.
Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B.
Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C.
The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 2 of 2
JTOS-100P+
