13 12 11 10 9 8 7 6 5 4 3 2 1 TAPE AND REEL SPECIFICATIONS FOR ALL RIGHT ANGLE IN-LINE SURFACE MOUNT MICRO-FIT(3.0) PACKAGING | ASSEMBLY | FMBOSSED | CKT. [PARTS PER| CARTON | REELS/ cea HALE/REEL |HALEVReEL | DIM A | DIM DIM Cc ITEM NO. | ITEM NO. | atem No. | SIZE] REEL PART *{CARTON]| SPQ | item no. | ttem No. | ITEM NO. (0873-0702 43650-O2** 10180-3002 2 320 (0180-037 | 9 2880 43655-000| {0180-650 | {0180-650 | |.260/(32.00) |. 1187(28.40) 2 (6/7(32.40) (0873-0703 43650-03** 10180-3003 3 320 (0180-037 g 2880 43655-000 | (0180-650 | (0180-650 | |.260/(32.00) |. 118/(28.40) 2 76/(32.40) (08/3-0/704 43650-04** 10180-3004 4 320 (0180-037 | f 2240 43655-0002 {0180-650 | (0180-6502 |. (327(44,.00) 1.59 17(40.40) |. (487(44.40) 10873-0705 43650-05** 10180-3005 o 320 (0180-037 | t 2240 43655-0002 (0180-650 | 10180-6502 |. f32/(44.00) 1.99 17/(40.40) |. (48/(44.40) 10873-0706 43650-06** (0180-3006 6 320 (0180-037 | t 2240 43655-0002 (0180-650 | 10180-6502 |. 32/(44.00) 1.59 1/(40.40) |. f48/(44.40) 10873-0707 43650-O7 ** (0180-3007 320 (0180-037 | t 2240 43655-0002 (0180-650 | 10180-6502 |. f32/(44.00) 59 17(40.40) |. (48/(44.40) 10873-0708 43650-08** 10180-3008 8 320 10 180-037 | t 2240 43655-0002 10 180-650 | 10180-6502 |. (32/(44.00) 1.59 17(40.40) |. (48/(44.40) 10873-0709 43650-O09** (0180-3009 g 320 (0180-037 S 1600 43655-0003 10180-6502 10180-6502 2.205/(56.00) | 2.063/(52.40) | 2.220/(56.40) 10873-0710 43650- |O** 10180-3010 lO 320 10 180-037 | 5 1600 43655-0003 10180-6502 10180-6502 2.205/(56.00) 2.063/(52.40) | 2.220/(56.40) 10873-O7 || 43650- | |** 10180-3011 I 320 10 180-037 | 3 1600 43655-0003 10180-6502 (0180-6502 2.205/(56.00) 2.063/(52.40) | 2.220/(56.40) 10873-0712 43650- |2** 10180-3012 I2 320 10 180-037 | 3 1600 43655-0003 10180-6502 10180-6502 2.205/(56.00) 2.063/(52.40) | 2.220/(56.40) NOTES: SEE NOTE 9 1) PACKAGING MATERIALS: EMBOSSED CARRIER TAPE IS POLYSTYRENE (PS), CARRIER REEL | TOP COVER TAPE IS A COMPOSITE OF POLYETHYLENE TEREPHTHALATE (PET), (2 PC ASSY) 40a09 | alvd ; ALO "ON LYVd POLYETHYLENE (PE), AND POLYFILM (PEF), CARRIER REEL IS POLYSTYRENE (PS). 2) THIS CONNECTOR COMPLIES WITH MOLEX PRODUCT SPECIFICATION PS-43650 TYPICAL PART ORIENTATION 3) EACH REEL MUST BE LOADED WITH 320 CONNECTORS (SEE NOTE 5). 4) THE FOLLOWING NOTES HAVE BEEN DERIVED FROM THE ELA. STANDARDS 481. COVER TAPE 5) CONNECTOR MINIMUMS/REEL ARE SHOWN ABOVE; IN NO CASE SHALL THERE BE (CLEAR ONLY) 13.000 3.937 TWO CONSECUTIVE COMPONENTS MISSING BETWEEN THE FIRST AND LAST PART (330.00) (100.00) OF ANY REEL. DIA. DIA. THE TOP COVER TAPE SHALL BE CLEAR ONLY, NOT EXTEND OVER THE EDGES OF THE CARRIER TAPE OR COVER ANY PART OF THE SPROCKET HOLES. 7) ADJACENT LAYERS OF TAPE SHALL NOT STICK TOGETHER WHEN WOUND ON THE CARRIER REEL. \&/ 8) THE TOP COVER TAPE MUST BE SECURELY ATTACHED TO THE EMBOSSED CARRIER v TAPE BY USE OF HEAT. 354 EMBOSSED 9) EACH REEL SHALL HAVE A LABEL AFFIXED TO IT WITH THE FOLLOWING INFORMATION: (9,00) CARRIER JTAPE .098/(2.50) WIDE SLOT POCKET DEPTH PART NO., QUANTITY=320, AND DATE CODE. LABEL SHOWN FOR ILLUSTRATION ONLY. (FOR TAPE START) -_ <C LABEL TO BE LOCATED ON SIDE OF REEL OPPOSITE THE ROUND SPROCKET HOLES. 10) TAPE SPLICES ARE NOT PERMITTED. a 2945 I57 | 11) THE TOP COVER TAPE SHALL HAVE A TOTAL PEEL STRENGTH OF 0.1-0.7 NEWTONS PRIMARY LEADER IS (24.00) (4.00) WHEN PULLED OPPOSITE THE DIRECTION OF CARRIER TAPE TRAVEL. THE CARRIER COVER TAPE ONLY PITCH 9 AND/OR COVER TAPE SHALL BE PULLED WITH A VELOCITY OF 1202mm PER MINUTE. 1059 pip. 13.00) < 12) ALL DIMENSIONS ARE SHOWN FOR REFERENCE ONLY. (1.50) ccempesssscecpessapecvssssscspesessssssusdpesecssssss}y FOAM FILLERS (2) * Ol Ol O inns {fale fill (fa A Oo CARDBOARD FILLER (1) i . N /\ ITEM NO. 85-04-1028 _-O4- ( oy G4 G4 G 4 G 4 * ITEM NO. 85-04-0214 - - - wy ry - a a et | FOAM FILLERS (2) * IO POCKETS LOADED COMPONENT AREA | | IO POCKETS ITEM NO. 85-04-1028 W/NO COMPONENTS (320 POCKETS) <LLLLLLLLLLA PULL OUT DIRECTION FROM REEL W/NO COMPONENTS CARDBOARD FILLER (1) ITEM NO. 85-04-0214 BOTTOM OF BOX TOP OF BOX LOADED CARRIER REELS Sue se DIMENSION STYLE SCALE DESIGN UNITS (TO BE ASSEMBLED AS SHOWN ABOVE), <==} JQUALITY| GENERAL TOLERANCES a Cc] THIRD. ANGLE SEE CHART FOR PACKAGING QUANTITIES | = SS) [SYMBOLS (UNLESS SPECIFIED) ow IN/MM op tore METRIC PROJECTION Sas MIM AND COMPONENT ITEM NO.S SSS 8)2|7-0 [PLACES IE=-- | E=-= BAP 03/25/96 MICRO FIT (3.0) aan =| ~ [3 PLACES|--- [#--- _ [CHECKED By DATE TAPE & REEL PK SPEC. FOR CARTON NUMBER 70160-0371 Sexe) VY [ZeLAcesi# [2 > BAP 03/25/96 R.A. IN-LINE_SMT_ASS'Y ITEM NO. 085-O1I-0014 Ha SR ele _3 [4 PLACE [E=== [-== [APPROVED By DATE PRODUCT LABEL * NOTE: FOR CKT SIZE 4-8 C5285 \/ 5 Po PLAce = + RIF 03/25/96 molex USE (1) FOAM FILLER: TOP & BOTTOM A S288 ANGULAR +1/2 MATERIAL NO. DOCUMENT NO. SHEET NO. S + * NOTE: FOR CKT SIZE 9-12 A, 2<e DRAFT WHERE APPLICABLEL SEE CHART PK-/0873-07xx 1_OF 4 USE (5) FOAM FILLERS: TOP & BOTTOM | <u U <\_ MUST REMAIN SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX G4 i WITHIN DIMENSIONS (. |INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_ME_T Rev. G 2012/01/11 12 1 10 9 8 7 6 5 4 3 2 |