PIN GRID ARRAY HEADERS
Pin Header Interconnects
Solder Tail
www.mill-max.com 516-922-6000
101
Series 551
Series 551 PGA Interconnect
sockets are available in various
lengths with .019” dia. pluggable
solder tails at one end and .025”
dia. pins at the other.*
Hi-Temp PCT polyester insulator
material suitable for all forms of
soldering.
Ordering Information
1. Select pin type for PGA header at left to determine 2-digit suffix
designation, and enter under pin type.
2. Specify 2-digit plating code from chart at bottom of page.
3. Locate footprint pattern from pages 107 to 111, the middle 8 digits of
the part number will be located under the pattern.
Determined from footprint pattern pages 107 to 111
No. of pins Grid size Pattern #
Window Pin Type
551 0 0
----
Series Plating
Code
EXAMPLE OF COMPLETE PART NUMBER:
551-10-068-11-061004
This is a 68 pin (11x11 grid) insulator with a .6” square
window and fitted with 551...004 header pins. Pins are
gold plated.
*Many other printed circuit pins are available for use in
addition to those listed above. See pages 170 to 173.
Consult Mill-Max Applications Engineers to develop a
part number for your specific requirement.
Pin Type
04
05
For L = .331”
For L = .606”
HEADER PIN TYPE 03
HEADER PIN TYPE 04, 05
Pin Plating 10μ Au 200μ Sn/Pb 200μ”Sn
SPECIFY PLATING CODE XX= 1090 40
2O(3
%#