885070 2437 MHz BAW Filter RFMD + TriQuint = Qorvo Applications * Usable Bandwidth of 69 MHz (CH1-11) * High-power WLAN Access Points and Small Cells * Band-edge filtering of WiFi signal emissions at 2390 MHz and 2483.5 MHz * WiFi bandpass filter that enables the coexistence of 4G (LTE/TD-LTE) & WiFi signals * ISM band applications such as Smart Meters * Portable Hotspots and Mobile Routers Product Features * Industry leading small size: 1.70 x 1.30 x 0.46 mm * Performance over - 40 to + 95 C * High Rejection at 2390 MHz, 2483.5 MHz, B38/B40/B7/B41 * Ceramic chip-scale Package (CSP) * Hermetically sealed Pb * RoHS compliant, Pb-free General Description The 885070 is a high-performance, high power Bulk Acoustic Wave (BAW) band-pass filter with extremely steep skirts, simultaneously exhibiting low loss in the WiFi band and high rejection in the band-edge and adjacent LTE /TD-LTE bands. CSP-1713 package: 1.70 x 1.30 x 0.46 mm Functional Block Diagram Top View 9 8 7 10 1 6 5 2 3 4 Pin Configuration Pin No. Label 9 Input 6 Output 1,2,3,4,5,7,8,10 Case Ground The 885070 enables coexistence of WiFi and LTE signals within the same device or in close proximity to one another. Its unique power handling capability allows for implementation into high performance high power access points and small cell base stations. The 885070 uses common module packaging techniques to achieve the industry standard 1.7 x 1.32 x 0.46 mm footprint. The filter exhibits industry leading power handling capabilities up to 1 W. Ordering Information Part No. Description 885070 885070-EVB Packaged part Evaluation board Standard T/R size = 15,000 units/reel Data Sheet: Rev G 04-14 -15 (c) 2015 TriQuint Semiconductor Inc. - 1 of 8 - Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com 885070 2437 MHz BAW Filter RFMD + TriQuint = Qorvo Absolute Maximum Ratings Rating MTTF - 55 to + 125C -40 to + 95C Input (2) Power + 70 C + 85 C + 95 C + 24 dBm > 1 B Hours > 1 B Hours > 1 B Hours +26 dBm 724 M hours 183 M hours 73 M Hours + 28 dBm 3.01 M Hours 0.76 M Hours 0.31 M Hours Parameter (1) Storage Temperature Operable Temperature 1. Operation of this device outside the parameter ranges given may cause permanent damage. 2. Input power with WLAN OFDM signal applied. Electrical Specifications (1) Conditions unless otherwise noted: Device Temperature = -40C to + 95C. Parameter (2) Min Typ (3) Max Units - 1.2 1.0 0.8 0.9 1.0 1.7 1.2 1.1 1.2 1.7 dB Amplitude Variation 2402.5 - 2421.5 MHz (WiFi Ch.1) 2407.5 - 2426.5 MHz (WiFi Ch.2) 2412.5 - 2461.5 MHz (WiFi Ch.3-9) 2447.5 - 2466.5 MHz (WiFi Ch.10) 2452.5 - 2471.5 MHz (WiFi Ch.11) - 1.5 0.8 0.5 0.5 1.0 3.0 1.2 1.0 1.2 3.5 dB Input/Output VSWR 2402.5 - 2471.5 MHz - Attenuation 100 - 2300 MHz (5) 2300 - 2370 MHz (5) 2370 - 2390 MHz (5) 2483.5 - 2500 MHz (5) 2500 - 2520 MHz (5) 2520 - 2570 MHz (5) 2570 - 2620 MHz (5) 2620 - 2690 MHz 4800 - 5000 MHz 20 20 15 15 25 28 25 25 25 - Insertion Loss Conditions 2402.5 - 2421.5 MHz (WiFi Ch.1) 2407.5 - 2426.5 MHz (WiFi Ch.2) 2412.5 - 2461.5 MHz (WiFi Ch.3-9) 2447.5 - 2466.5 MHz (WiFi Ch.10) 2452.5 - 2471.5 MHz (WiFi Ch.11) (4) Source/Load Impedance (7) 1.5 (6) 23 25 19 24 38 31 28 27 29 50 2.1 - (6) dB dB dB dB dB dB dB dB dB Notes: 1. In production, devices will be tested at room temperature to a guard-banded specification to ensure electrical compliance over temperature. 2. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances. 3. Only at 25C. 4. Data is the integrated value of the linear s-parameter over a 19 MHz range in the indicated band at the specified temperature. 5. Data is the integrated value of the linear s-parameter over a 5 MHz range at the specified temperature. 6. An external impedance matching network with 2 % tolerance will be necessary to achieve the stated specifications. 7. This is the optimum impedance in order to achieve the performance shown. Data Sheet: Rev G 04-14 -15 (c) 2015 TriQuint Semiconductor Inc. - 2 of 8 - Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com 885070 2437 MHz BAW Filter RFMD + TriQuint = Qorvo Electrical Specifications (1) Conditions unless otherwise noted: Device Temperature = -30C to + 85C. Parameter (2) Min Typ (3) Max Units - 1.2 1.0 0.8 0.9 1.0 1.6 1.2 1.1 1.2 1.6 dB Amplitude Variation 2402.5 - 2421.5 MHz (WiFi Ch.1) 2407.5 - 2426.5 MHz (WiFi Ch.2) 2412.5 - 2461.5 MHz (WiFi Ch.3-9) 2447.5 - 2466.5 MHz (WiFi Ch.10) 2452.5 - 2471.5 MHz (WiFi Ch.11) - 1.5 0.8 0.5 0.5 1.0 2.8 1.2 1.0 1.2 3.0 dB Input/Output VSWR 2402.5 - 2471.5 MHz - Attenuation 100 - 2300 MHz (5) 2300 - 2370 MHz (5) 2370 - 2390 MHz (5) 2483.5 - 2500 MHz (5) 2500 - 2520 MHz (5) 2520 - 2570 MHz (5) 2570 - 2620 MHz (5) 2620 - 2690 MHz 4800 - 5000 MHz 20 20 15 15 25 28 25 25 25 23 25 19 24 38 31 28 27 29 - dB dB dB dB dB dB dB dB dB - 50 - Insertion Loss Conditions 2402.5 - 2421.5 MHz (WiFi Ch.1) 2407.5 - 2426.5 MHz (WiFi Ch.2) 2412.5 - 2461.5 MHz (WiFi Ch.3-9) 2447.5 - 2466.5 MHz (WiFi Ch.10) 2452.5 - 2471.5 MHz (WiFi Ch.11) (4) Source/Load Impedance (7) 1.5 (6) 1.8 (6) - Notes: 1. In production, devices will be tested at room temperature to a guard-banded specification to ensure electrical compliance over temperature. 2. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances. 3. Only at 25C. 4. Data is the integrated value of the linear s-parameter over a 19 MHz range in the indicated band at the specified temperature. 5. Data is the integrated value of the linear s-parameter over a 5 MHz range at the specified temperature. 6. An external impedance matching network with 2 % tolerance will be necessary to achieve the stated specifications. 7. This is the optimum impedance in order to achieve the performance shown. Data Sheet: Rev G 04-14 -15 (c) 2015 TriQuint Semiconductor Inc. - 3 of 8 - Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com 885070 2437 MHz BAW Filter RFMD + TriQuint = Qorvo Electrical Specifications (1) Conditions unless otherwise noted: Device Temperature = 0C to + 70C. Parameter (2) Insertion Loss Conditions Min 2402.5 - 2421.5 MHz (WiFi Ch.1) 2407.5 - 2426.5 MHz (WiFi Ch.2) 2412.5 - 2461.5 MHz (WiFi Ch.3-9) 2447.5 - 2466.5 MHz (WiFi Ch.10) 2452.5 - 2471.5 MHz (WiFi Ch.11) 2402.5 - 2421.5 MHz (WiFi Ch.1) 2407.5 - 2426.5 MHz (WiFi Ch.2) 2412.5 - 2461.5 MHz (WiFi Ch.3-9) 2447.5 - 2466.5 MHz (WiFi Ch.10) 2452.5 - 2471.5 MHz (WiFi Ch.11) (4) Amplitude Variation Typ (3) Max 1.2 1.0 0.8 0.9 1.0 1.5 0.8 0.5 0.5 1.0 1.5 1.2 1.1 1.2 1.5 2.5 1.1 1.0 1.1 2.8 (6) (6) dB 2402.5 - 2471.5 MHz - Attenuation 100 - 2300 MHz (5) 2300 - 2370 MHz (5) 2370 - 2390 MHz (5) 2483.5 - 2500 MHz (5) 2500 - 2520 MHz (5) 2520 - 2570 MHz (5) 2570 - 2620 MHz (5) 2620 - 2690 MHz 4800 - 5000 MHz 20 20 15 15 25 28 25 25 25 23 25 19 24 38 31 28 27 29 - dB dB dB dB dB dB dB dB dB - 50 - (7) 1.8 dB Input/Output VSWR Source/Load Impedance 1.5 Units - Notes: 1. In production, devices will be tested at room temperature to a guard-banded specification to ensure electrical compliance over temperature. 2. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances. 3. Only at +25C. 4. Data is the integrated value of the linear s-parameter over a 19 MHz range in the indicated band at the specified temperature. 5. Data is the integrated value of the linear s-parameter over a 5 MHz range at the specified temperature. 6. An external impedance matching network with 2 % tolerance will be necessary to achieve the stated specifications. 7. This is the optimum impedance in order to achieve the performance shown. Data Sheet: Rev G 04-14 -15 (c) 2015 TriQuint Semiconductor Inc. - 4 of 8 - Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com 885070 2437 MHz BAW Filter RFMD + TriQuint = Qorvo Evaluation Board Notes: 1. Matching component values shown are for the specified TriQuint evaluation board. Value adjustment may be required in end user product circuits depending on component manufacturer and PCB material. 2. PCB: .500 x.500 x .062; Construction: 1/2 oz Cu Top Layer; TLY-5A (.0075) 1/2 oz Cu Middle Layer, FR4; 1/2 oz Cu Bottom Layer. (dimensions are in inches) Bill of Material Reference Des. Value Description Manuf. Part Number L1 20 nH Chip Inductor, 0402, +/- 3 % Murata LQW15AN20NG00 L2 20 nH Chip Inductor, 0402, +/- 3 % Murata LQW15AN20NG00 SMA N/A SMA connector Radiall USA 9602-1111-018 PCB N/A 3-layer Multiple 961064 PCB Mounting Pattern 1.63 0.15 0.325 Notes: 1. All dimensions are in millimeters. Angles are in degrees. 2. This drawing specifies the mounting pattern used on the TriQuint evaluation board for this product. Some modification may be necessary to suit end user assembly materials and processes. 1.24 0.29 0.15 0.64 0.295 0.54 Data Sheet: Rev G 04-14 -15 (c) 2015 TriQuint Semiconductor Inc. - 5 of 8 - Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com 885070 2437 MHz BAW Filter RFMD + TriQuint = Qorvo Performance Plots Test conditions unless otherwise noted: Temp= + 25C Passband Response Frequency Response 0 0 -10 -1 -2 -20 d B d B -30 -3 -40 -4 -50 2182 2309.5 2437 2564.5 -5 2368 2692 2402.5 2437 2471.5 2506 Frequency (MHz) Frequency (MHz) Wideband Response L i n 0 Input / Output VSWR 3 2.5 2 -10 -20 d B -30 M a g 1.5 L i n 3 1 2368 2402.5 2437 2471.5 2506 2437 2471.5 2506 2.5 2 -40 -50 0 1000 2000 3000 4000 5000 6000 M a g 1.5 1 2368 2402.5 Frequency (MHz) Frequency (MHz) Input Smith Chart Output Smith Chart 1 1 0.8 0.8 0.6 0.6 0.4 0.4 0.2 0.2 0 0 -1 -0 .5 0 0.5 -1 1 -0 .5 0 -0 .2 -0 .2 -0 .4 -0 .4 -0 .6 -0 .6 -0 .8 -0 .8 -1 -1 Data Sheet: Rev G 04-14 -15 (c) 2015 TriQuint Semiconductor Inc. - 6 of 8 - 0.5 1 Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com 885070 2437 MHz BAW Filter RFMD + TriQuint = Qorvo Package Information, Marking and Dimensions MFG site Marking code Package for Surface Mount Technology Terminations: Au plating 0.5 - 1.0 m, over a 2-6 m Ni Plating. Approximate weight 3.96 mg A3 M WWY ID dot Package Style: CSP-1713 Dimensions: 1.7 x 1.3 x 0.50 mm Date code 0.46 NOM. 0.50 MAX. The Marking Code is correlated with the Part Number M=Manufacturing Site Code (Blank for Apopka, C for Costa Rica) The Date Code consists of: WW = 2 digit week, Y=The last digit of the year. 1.70 1.54 Notes: 1. 2. 0.24 0.235 3. 0.20 1.30 1.15 0.24 0.55 All dimensions shown are typical in millimeters. Unless otherwise specified all tolerances are 0.05mm except length and width that are specified as 0.1mm. An asterisk (*) in front of the marking code indicates prototype. 0.205 0.45 Tape and Reel information 2.7 SECTION A-A 8.8 O330 ID dot 5 MAX. TYP. 1.47 SECTION B-B A A 0.250 4.0 1.5 B 1.75 O102 O20.2 O13.0 Direction of travel 3.50 2.0 8.0 1.88 0.63 0.60 4.0 2.0 B Standard T/R size=15,000 units/reel. All dimensions are in millimeters. Data Sheet: Rev G 04-14 -15 (c) 2015 TriQuint Semiconductor Inc. - 7 of 8 - Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com 885070 2437 MHz BAW Filter RFMD + TriQuint = Qorvo Product Compliance Information ESD Sensitivity Ratings Caution! ESD-Sensitive Device Solderability Compatible with the latest version of J-STD-020, lead free solder, 260C Refer to Soldering guidelines. ESD Rating: 2 Test: Human Body Model (HBM) Standard: ESDA/JEDEC JS-001-2012 ESD Rating: C Test: Machine Model (MM) Standard: JEDEC Standard JESD22-A115 MSL Rating Not applicable. Hermetic package. Test: 260 C convection reflow Standard: JEDEC Standard IPC/JEDEC J-STD-020 Profile for recommended RoHs Compliance This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). This product also has the following attributes: * Halogen Free (Chlorine, Bromine) * Antimony Free * TBBP-A (C15H12Br402) Free * PFOS Free * SVHC Free Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations: Web: www.triquint.com Tel: Email: customer.support@qorvo.com Tel: 877-800-8584 For information about the merger of RFMD and TriQuint as Qorvo: Web: www.qorvo.com For technical questions and application information: Email: flapplication.engineering@tqs.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or lifesustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Data Sheet: Rev G 04-14 -15 (c) 2015 TriQuint Semiconductor Inc. - 8 of 8 - Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com