Stancor
Auto and Isolation Transformers, Adapter Plugs and Energy Limiting Transformers
1050
b
ALLIED For Local Personalized Service Call 1-800-433-5700
Grounding adapters, ideal for use on electrical/electronic equipment on the CEE-7 SCHUKO outlet configuration. The use
of these adapters reduces the need for expensive and difficult-to-obtain foreign type power cords and cord sets, as they
provide a fast, easy means of connecting equipment to European outlets.
American to European Ñ Fig. A
Allows interface from NEMA 6-15P plugs to CEE-7 SCHUKO grounding outlets.
928-9951. ADT-30100. 1-49 ................................................................................................................................EACH 10.36
European to American Ñ Fig. B
Allows interface from CEE-7 SCHUKO plugs to NEMA 6-15R grounding outlets.
928-9952. ADT-30120. 1-49 ................................................................................................................................. EACH 19.55
European to United Kingdom Ñ Fig. C
Allows interface from CEE-7 SCHUKO plugs to U.K. 13 A, 250 V receptacles.
928-9953. ADT-30140. 1-49 ................................................................................................................................. EACH 18.08
International Adapter Plugs
17
Auto/Isolation Transformers
Auto transformers have one winding that is tapped to achieve specific output voltage. They provide no electrical isolation in
a circuit. Auto transformers are typically smaller than their isolation equivalent. Isolation transformers have two separate
windings with an electrostatic shield between them to provide complete electrical isolation from the source. Auto/isolation
transformers can be used in most countries by using an input adapter plug, see International Adapter Plugs section below
for StancorÕs high quality line. Specifications. Input Cord Length: 5
1
/
2
' min. Output Cord Length: 8" min. Input Voltages:
115/230 VAC. Operating Temperature: Ð40¡ to 105¡C. Output Voltage: 115/230 VAC. Power Range: 0.6-1500 VA.
Stock Mfr.Õs Voltage Input Output VA RMS Test
Style Amps
No. Type Step Voltage Voltage Capacitance Voltage
Case Dimensions Ñ In.
DWH
928-4872 P-8620* A Down 230 115 0.430 50.00 1500 2.31 3.69 1.88 3.13 Ñ 1.50 10.57 9.85
928-0300 GSD-75 C Down 230 115 0.650 75.00 1500 3.13 2.50 2.88 2.00 1.75 3.00 47.37 44.15
928-4873 P-8630 C Down 230 115 0.740 85.00 1500 3.13 2.50 2.88 2.00 1.75 2.50 34.44 32.10
928-4874 P-8631 C Down 230 115 1.100 125.00 1500 3.13 2.50 3.00 2.00 2.06 3.00 34.03 31.72
928-0302 GSD-150 C Down 230 115 1.300 150.00 1500 3.88 3.13 3.25 2.50 2.22 4.40 50.54 47.11
928-4875 P-8632 C Down 230 115 1.740 200.00 1500 3.88 3.13 3.25 2.50 2.22 4.20 40.87 38.10
928-0303 GSD-250 C Down 230 115 2.200 250.00 1500 3.88 3.13 3.63 2.50 2.22 5.80 60.81 56.69
928-0304 GSD-300 C Down 230 115 2.600 300.00 1500 3.88 3.13 3.63 2.50 2.22 5.80 80.34 74.89
928-4876 P-8634 C Down 230 115 3.500 400.00 1500 3.88 3.13 4.25 2.50 2.72 7.00 47.38 44.17
928-0306 GSD-500 C Down 230 115 4.300 500.00 1500 4.63 3.81 4.44 3.00 3.19 10.60 67.10 61.51
928-0307 GSD-750 C Down 230 115 6.500 750.00 1500 4.63 3.81 5.38 3.00 3.94 14.40 81.11 74.35
928-0308 GSD-1000 C Down 230 115 8.700 1000.00 1500 4.63 3.81 6.06 3.00 4.69 17.00 104.61 97.52
928-0309 GSD-1500 C Down 230 115 13.000 1500.00 1500 5.38 4.44 6.00 3.50 4.00 20.00 155.67 145.11
928-6100 P-8638 C Up 115 230 0.540 125.00 1500 3.13 2.50 3.00 2.00 2.06 3.00 35.46 33.05
928-4877 P-8639 C Up 115 230 1.300 300.00 1500 3.88 3.13 3.88 2.50 2.22 5.20 42.75 39.85
928-4879 P-8689 C Up 115 230 4.350 1000.00 1500 4.63 3.75 6.13 3.00 4.69 17.00 76.78 71.58
Isolation Transformers
928-6413 P-6413* A Straight 115 115 0.005 0.60 1500 1.25 2.13 1.25 1.75 Ñ 0.25 15.54 14.49
928-3033 P-6411* A Straight 115 115 0.130 15.00 1500 2.00 3.25 1.88 2.81 Ñ 1.00 15.37 14.33
928-3034 P-6412* A Straight 115 115 0.300 35.00 1500 2.38 3.75 2.00 3.13 Ñ 1.70 19.43 18.11
928-4880 P-8622 C Straight 115 115/230à 1.300 150.00 1500 3.88 3.13 4.00 2.50 2.72 6.20 35.83 33.40
928-3037 P-6406* A Straight 115/230¥ 115 0.430 50.00 1500 2.38 3.75 2.31 3.13 Ñ 1.80 25.31 23.60
928-0325 GIS-100 C Straight 115 115 0.870 100.00 1500 3.50 2.81 3.56 2.25 2.28 4.50 63.05 58.78
928-0326 GIS-150 C Straight 115 115 1.300 150.00 1500 3.88 3.13 4.19 2.50 2.72 7.00 58.78 54.79
928-0327 GIS-250 C Straight 115 115 2.170 250.00 1500 4.69 3.75 4.38 3.00 3.19 9.00 85.16 79.39
928-0328 GIS-500 C Straight 115 115 4.350 500.00 1500 4.69 3.75 6.00 3.00 4.69 16.00 98.74 92.04
928-0329 GIS-1000 C Straight 115 115 8.700 1000.00 1500 5.38 4.38 8.13 3.50 6.50 31.00 193.60 180.47
928-0350 GISD-100 C Down 230 115 0.870 100.00 1500 3.50 2.81 3.63 2.25 2.28 4.50 63.95 59.61
928-0351 GISD-150 C Down 230 115 1.300 150.00 1500 3.88 3.13 4.19 2.50 2.72 7.00 70.02 65.28
928-0352 GISD-250 C Down 230 115 2.170 250.00 1500 4.69 3.75 4.38 3.00 3.19 9.00 70.01 65.26
928-0353 GISD-500 C Down 230 115 4.350 500.00 1500 4.69 3.75 6.00 3.00 4.69 16.00 98.55 91.87
928-0354 GISD-1000 C Down 230 115 8.700 1000.00 1500 5.38 4.38 8.13 3.50 6.50 31.00 200.30 186.72
*Has leadwires. Has electrostatic shield on separate leadwire (not grounded). àSecondary is two separate 115 V windings. ¥Primary is two separate 115 V windings.
Auto Transformers
Mounting Ñ In.
MDMW
Weight
(Lbs.)
EACH
50-991-49
Features
c
Three Conductor Line Cord and Receptacle Ñ Some
Items Available with Leadwires
c
GIS and GISD Series Have Electrostatic Shields
Connected to Case, Core and to Third Conductor of
Cord and Receptacle
c
El Laminations
c
Heavy Duty Welded Plate Ensures Mounting
Stability
Applications
c
Computer Protection
c
Dental Chairs
c
Electrical Appliances
c
Lab Test Equipment
c
Incubator Ovens
c
LED Signs
c
Office Copiers and Printers
928-0001 592-9012 120 24 1.67 40 Horizontal
1
/
4
QC
1
/
4
QC 2.25 3.69 2.25 3.13 1.5 UL Class 2/CSA 10.05 9.37
928-0002 592-9013 240 24 1.67 40 Horizontal
1
/
4
QC
1
/
4
QC 2.25 3.69 2.25 3.13 1.5 UL Class 2/CSA 45.00 41.00
928-0003 592-9016 120/240 24 1.67 40 Horizontal
1
/
4
QC
1
/
4
QC 2.25 3.69 2.25 3.13 1.5 UL Class 2/CSA 10.53 9.82
928-0004 592-9017 208/240 24 1.67 40 Horizontal
1
/
4
QC
1
/
4
QC 2.25 3.69 2.25 3.13 1.5 UL Class 2/CSA 10.53 9.82
928-0005 592-9018 120/208/240 24 1.67 40 Horizontal
1
/
4
QC
1
/
4
QC 2.25 3.69 2.25 3.13 1.5 UL Class 2/CSA 11.07 10.32
*Agency Certification Note: UL Recognized (File E-109254), UL Class 2, CSA Certified (File LR 67888).
Energy Limiting Transformers
Features
c
Heavy Duty Welded Mounting Plate Provides Mounting Stability
c
Rigid
1
/
4
" Q.C. Terminals Provide Ease of Installation
c
Rated for Continuous Duty
c
Windings and Internal Connections Enclosed with Insulating Plastic
Cover for Safety
c
Non-Concentric Windings Reduce Size and Cost and Improve
Manufacturability
Applications
c
Commercial Dryers
c
Deep Fryers
c
Greenhouse Controls
c
Home Environmental Systems
c
Security Systems
c
Video Games
c
Automatic Doors
c
Solar Heating Units
Stock Mfr.Õs Input Output Output Secondary Primary
VA Mounting
No. Type Voltage Voltage Current Terminal Terminal
Dim. Ñ In.
WDMWH
Weight
(Lbs.)
Agency
Certification*
EACH
1-49 50-99
Meet UL safety specifications. Split bobbin winding reduces capacitive coupling and eliminates need for electrostatic shield. Broad range of input voltage
combinations cover most HVAC applications. 40AV power rating eliminates need for multiple parts to cover lower power requirements. All primaries 50/60 Hz.
Visit StancorÕs Website at www.stancor.com