MIXERS - HIGH IP3 - SMT
9
9 - 246
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC402MS8 / 402MS8E
HIGH IP3 GaAs MMIC
MIXER, 1.8 - 2.2 GHz
v02.0705
General Description
Features
Functional Diagram
Input IP3: +31 dBm
High Side LO
Ultra Small MSOP8 Package: 14.8mm2
No External Components
Included in the HMC-DK002 Designer’s Kit
Electrical Speci cations, TA =25 °C, LO = +17 dBm, IF = 300 MHz*
Typical Applications
The HMC402MS8 & HMC402MS8E are high dynamic
range passive MMIC mixers in plastic surface mount
8 lead Mini Small Outline Packages (MSOP) cover-
ing 1.8 to 2.2 GHz. Excellent input IP3 performance
of +31 dBm for down conversion and +27 dBm for up
conversion is provided for 2.5G & 3G GSM/CDMA
based UMTS or PCS applications at an LO drive of
+17dBm. With a 1dB compression of +21 dBm, the RF
port will accept a wide range of input signal levels.
Conversion loss is 8.5dB typical and LO isolations are
maintained at 24 to 30 dB. This miniature single-end-
ed monolithic GaAs FET mixer does not require any
external components or bias. The broad 50 to
500 MHz IF frequency response will satisfy many
UMTS/PCS transmit or receive frequency plans
con gured for high side LO. The HMC402MS8(E)
input IP3 performance coupled with its high P1dB
rivals traditional active FET mixers while offering
a much smaller 14.8mm2 standard IC footprint, and
no DC bias.
Parameter Min. Typ. Max. Min. Typ. Max. Units
Frequency Range, RF 1.8 - 2.0 2.0 - 2.2 GHz
Frequency Range, LO 1.85 - 2.5 2.05 - 2.53 GHz
Frequency Range, IF DC - 500 DC - 330 MHz
Conversion Loss 8.8 10.5 8.5 10.5 dB
Noise Figure (SSB) 8.8 10.5 8.5 10.5 dB
LO to RF Isolation 24 30 21 25 dB
LO to IF Isolation 19 24 24 28 dB
IP3 (Input) 27 30 27 31 dBm
1 dB Gain Compression (Input) 18 21 18 22 dBm
LO Input Drive Level (Typical) +16 to +18 +16 to +18 dBm
*Unless otherwise noted, all measurements performed as a downconverter with high side LO & IF = 300 MHz.
High Dynamic Range Infrastructure:
• GSM, GPRS & EDGE
• CDMA & W-CDMA
• Cable Modem Termination Systems
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
OBSOLETE
MIXERS - HIGH IP3 - SMT
9
9 - 247
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Conversion Gain vs.
Temperature @ LO = +17 dBm Isolation @ LO = +17 dBm
Conversion Gain vs. LO Drive Return Loss @ LO = +17 dBm
IF Bandwidth @ LO = +17 dBm
*Unless otherwise noted, all measurements performed as a downconverter with high side LO & IF = 300 MHz.
Unconverter Performance
Conversion Gain @ LO = +17 dBm
HMC402MS8 / 402MS8E
HIGH IP3 GaAs MMIC
MIXER, 1.8 - 2.2 GHz
v02.0705
-20
-15
-10
-5
0
1.7 1.8 1.9 2 2.1 2.2 2.3
+ 25C
+ 85C
- 40C
CONVERSION GAIN (dB)
RF FREQUENCY (GHz)
-20
-15
-10
-5
0
1.7 1.8 1.9 2 2.1 2.2 2.3
CONVERSION GAIN (dB)
RF FREQUENCY (GHz)
-20
-15
-10
-5
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
CONVERSION GAIN
RETURN LOSS (dB)
IF FREQUENCY (GHz)
RESPONSE (dB)
-25
-20
-15
-10
-5
0
1.5 1.75 2 2.25 2.5
RF
LO
RETURN LOSS (dB)
RF FREQUENCY (GHz)
-20
-15
-10
-5
0
1.7 1.8 1.9 2 2.1 2.2 2.3
LO = +15dBm
LO = +16dBm
LO = +17dBm
LO = +19dBm
CONVERSION GAIN (dB)
RF FREQUENCY (GHz)
-40
-30
-20
-10
0
1.7 1.8 1.9 2 2.1 2.2 2.3
RF TO IF
LO TO RF
LO TO IF
ISOLATION (dB)
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
OBSOLETE
MIXERS - HIGH IP3 - SMT
9
9 - 248
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Input IP3 vs.
Temperature @ LO = +17 dBm
Input IP3 vs. LO Drive
Upconverter IP3 vs.
LO Drive, IF = 200 MHz
Input P1dB vs.
Temperature @ LO = +17 dBm
Input IP3 vs.
IF Frequency, RF = 1.95 GHz
Input IP3 vs.
IF Frequency, RF = 2.15 GHz
*Unless otherwise noted, all measurements performed as a downconverter with high side LO & IF = 300 MHz.
HMC402MS8 / 402MS8E
HIGH IP3 GaAs MMIC
MIXER, 1.8 - 2.2 GHz
v02.0705
20
25
30
35
40
60 90 120 150 180 210 240 270 300
LO = +15 dBm
LO = +16 dBm
LO = +17 dBm
LO = +19 dBm
INPUT IP3 (dBm)
IF FREQUENCY (MHz)
15
17
19
21
23
25
1.7 1.8 1.9 2 2.1 2.2 2.3
+ 25C
+ 85C
- 40C
INPUT P1dB (dBm)
RF FREQUENCY (GHz)
15
20
25
30
35
1.7 1.8 1.9 2 2.1 2.2 2.3
LO = +15dBm
LO = +16dBm
LO = +17dBm
LO = +19dBm
INPUT IP3 (dBm)
RF FREQUENCY (GHz)
20
25
30
35
40
1.7 1.8 1.9 2 2.1 2.2 2.3
LO = +15 dBm
LO = +16 dBm
LO = +17 dBm
LO = +19 dBm
INPUT IP3 (dBm)
RF FREQUENCY (GHz)
20
25
30
35
40
60 90 120 150 180 210 240 270 300
LO = +15dBm
LO = +16dBm
LO = +17dBm
LO = +19dBm
INPUT IP3 (dBm)
IF FREQUENCY (MHz)
20
25
30
35
40
1.7 1.8 1.9 2 2.1 2.2 2.3
+ 25C
+ 85C
- 40C
INPUT IP3 (dBm)
RF FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
OBSOLETE
MIXERS - HIGH IP3 - SMT
9
9 - 249
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Input IP2 vs. Temperature
@ LO = +17 dBm Input IP2 vs. LO Drive
MxN Spurious Outputs
nLO
mRF01234
0xx-7-3-111
150275430
26264486570
38181828180
47781808382
RF Freq = 1.9 GHz @ -10 dBm
LO Freq = 2.2 GHz @ +17 dBm
All values in dBc relative to the IF power level.
Measured as a downconverter.
Harmonics of LO
nLO Spur @ RF Port
LO Freq (GHz) 1 2 3 4
1.8 40 30 51 57
230295153
2.2 26 32 51 50
2.4 24 36 53 49
2.6 23 43 59 53
2.8 22 41 51 71
LO = +17 dBm
All values are in dBc below input LO level @ RF port.
*Unless otherwise noted, all measurements performed as a downconverter with high side LO & IF = 300 MHz.
Absolute Maximum Ratings
RF/IF Input +27 dBm
LO Drive +27 dBm
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
IF DC Current ±40 mA
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
20
25
30
35
40
1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4
LO = +15 dBm
LO = +16 dBm
LO = +17 dBm
LO = +19 dBm
INPUT IP2 (dBm)
RF FREQUENCY (GHz)
20
25
30
35
40
1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4
+ 25C
+ 85C
- 40C
INPUT IP2 (dBm)
RF FREQUENCY (GHz)
HMC402MS8 / 402MS8E
HIGH IP3 GaAs MMIC
MIXER, 1.8 - 2.2 GHz
v02.0705
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
OBSOLETE
MIXERS - HIGH IP3 - SMT
9
9 - 250
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
HMC402MS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H402
XXXX
HMC402MS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H402
XXXX
[1] Max peak re ow temperature of 235 °C
[2] Max peak re ow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
HMC402MS8 / 402MS8E
HIGH IP3 GaAs MMIC
MIXER, 1.8 - 2.2 GHz
v02.0705
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
OBSOLETE
MIXERS - HIGH IP3 - SMT
9
9 - 251
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Pin Descriptions
Pin Number Function Description Interface Schematic
1LO
This pin is AC coupled & matched to 50 Ohms
from 1.8 to 2.2 GHz. Blocking capacitors are required if line
potential is not equal to 0V.
2, 4 N/C Not connected.
3, 6, 7 GND This pin must be connected to RF ground.
5IF Port
This pin is DC coupled. For applications not requiring
operation to DC this port should be DC blocked externally
using a series capacitor. Choose value of capacitor to
pass IF frequency desired. For operation to DC, this
pin must not sink/source more than 40 mA of current or
failure may result.
8RF Port This pin is DC coupled & matched to 50 Ohms
from 1.8 to 2.2 GHz
HMC402MS8 / 402MS8E
HIGH IP3 GaAs MMIC
MIXER, 1.8 - 2.2 GHz
v02.0705
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
OBSOLETE
MIXERS - HIGH IP3 - SMT
9
9 - 252
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC402MS8 / 402MS8E
HIGH IP3 GaAs MMIC
MIXER, 1.8 - 2.2 GHz
v02.0705
Evaluation PCB
Item Description
J1 - J3 PCB Mount SMA RF Connector
U1 HMC402MS8 / HMC402MS8E Mixer
PCB [2] 101828 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the nal application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
List of Materials for Evaluation PCB 101830 [1]
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
OBSOLETE
MIXERS - HIGH IP3 - SMT
9
9 - 253
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC402MS8 / 402MS8E
HIGH IP3 GaAs MMIC
MIXER, 1.8 - 2.2 GHz
v02.0705
Notes:
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
OBSOLETE
