INFRARED EMITTING DIODE Part Number: KM2520SF4C03 Features Description SUBMINIA TURE PACKAGE. SF4 Made with Gallium Aluminum Arsenide Infrared Emit- MECHANICALLY AND SPECTRALLY MATCHED TO ting diodes. THE PHOTOTRANSISTOR. GULL WING LEAD. LONG LIFE - SOLID STATE RELIABILITY. LOW PACKAGE PROFILE. PACKAGE : 1000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. 5. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAA5017 REV NO: V.7 DATE: AUG/09/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 4 ERP: 1202000624 Selection Guide Part No. KM2520SF4C03 Dice Lens Type SF4 (GaAIAs) Po (mW/sr) [2] @ 20mA *50mA Min. Typ. 1.6 4 *2.6 *8 WATER CLEAR Viewing Angle [1] 21/2 20 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. * Luminous intensity with asterisk is measured at 50mA;Radiant Intensity/ luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25C Parameter P/N Symbol Typ. Max. Units Test Conditions Forward Voltage [1] SF4 VF 1.3 1.6 V IF=20mA Reverse Current SF4 IR 10 uA VR = 5V Capacitance SF4 C 90 pF VF=0V;f=1MHz Peak Spectral Wavelength SF4 P 880 nm IF=20mA Spectral Bandwidth SF4 1/2 50 nm IF=20mA Note: 1. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Symbol SF4 Units Power dissipation PT 80 mW DC Forward Current IF 50 mA Peak Forward Current [1] iFS 1.2 A Reverse Voltage VR 5 V Operating Temperature TA -40 To +85 C TSTG -40 To +85 C Storage Temperature Note: 1. 1/100 Duty Cycle, 10s Pulse Width. SPEC NO: DSAA5017 REV NO: V.7 DATE: AUG/09/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 2 OF 4 ERP: 1202000624 KM2520SF4C03 SPEC NO: DSAA5017 REV NO: V.7 DATE: AUG/09/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 3 OF 4 ERP: 1202000624 KM2520SF4C03 Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Specifications (Units : mm) SPEC NO: DSAA5017 REV NO: V.7 DATE: AUG/09/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 4 OF 4 ERP: 1202000624 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Kingbright: KM2520SF4C03