SPEC NO: DSAA5017 REV NO: V.7 DATE: AUG/09/2007 PAGE: 1 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1202000624
INFRARED EMITTING DIODE
Part Number: KM2520SF4C03
Features
SUBMINIA TURE PACKAGE.
MECHANICALLY AND SPECTRALLY MATCHED TO
THE PHOTOTRANSISTOR.
GULL WING LEAD.
LONG LIFE - SOLID STATE RELIABILITY.
LOW PACKAGE PROFILE.
PACKAGE : 1000PCS / REEL.
MOISTURE SENSITIVITY LEVEL : LEVEL 3.
RoHS COMPLIANT.
Description
SF4 Made with Gallium Aluminum Arsenide Infrared Emit-
ting diodes.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
5. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAA5017 REV NO: V.7 DATE: AUG/09/2007 PAGE: 2 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1202000624
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. * Luminous intensity with asterisk is measured at 50mA;Radiant Intensity/ luminous flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Note:
1. Forward Voltage: +/-0.1V.
Note:
1. 1/100 Duty Cycle, 10μs Pulse Width.
Part No. Dice Lens Type
Po (mW/sr) [2]
@ 20mA *50mA
Viewing
Angle [1]
Min. Typ. 2θ1/2
KM2520SF4C03 SF4 (GaAIAs) WATER CLEAR
1.6 4
*2.6 *8
20°
Parameter P/N Symbol Typ. Max. Units Test Conditions
Forward Voltage [1] SF4 VF 1.3 1.6 V IF=20mA
Reverse Current SF4 IR 10 uA VR = 5V
Capacitance SF4 C 90 pF VF=0V;f=1MHz
Peak Spectral Wavelength SF4 λP 880 nm IF=20mA
Spectral Bandwidth SF4 Δλ1/2 50 nm IF=20mA
Parameter Symbol SF4 Units
Power dissipation PT 80 mW
DC Forward Current IF 50 mA
Peak Forward Current [1] iFS 1.2 A
Reverse Voltage VR 5 V
Operating Temperature TA -40 To +85 °C
Storage Temperature TSTG -40 To +85 °C
SPEC NO: DSAA5017 REV NO: V.7 DATE: AUG/09/2007 PAGE: 3 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1202000624
KM2520SF4C03
SPEC NO: DSAA5017 REV NO: V.7 DATE: AUG/09/2007 PAGE: 4 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1202000624
KM2520SF4C03
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
