https://www.phoenixcontact.com/us/products/5603261 Optocoupler - PLC-OSC- 24DC/ 48DC/100/C1D2 - 5603261 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PLC-INTERFACE, consisting of DIN rail-mountable basic terminal block with screw connection and plug-in miniature solid-state relay, input: 24 V DC, output: 3 - 48 V DC/100 mA, UL/cUL: approved for use in Ex Zone Class I, Div. 2 Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356687379 Weight per Piece (excluding packing) 38.000 g Custom tariff number 85364190 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 6.2 mm Height 80 mm Depth 94 mm Ambient conditions Ambient temperature (operation) -20 C ... 60 C Ambient temperature (storage/transport) -40 C ... 85 C Input data 05/21/2019 Page 1 / 12 https://www.phoenixcontact.com/us/products/5603261 Optocoupler - PLC-OSC- 24DC/ 48DC/100/C1D2 - 5603261 Technical data Input data Nominal input voltage UN 24 V DC Input voltage range in reference to UN 0.8 ... 1.2 Input voltage range 19.2 V DC ... 28.8 V DC Switching threshold "0" signal in reference to UN 0.4 Switching threshold "1" signal in reference to UN 0.8 Typical input current at UN 8.5 mA Typical response time 20 s (at UN) Typical turn-off time 300 s (at UN) Operating voltage display Yellow LED Type of protection Reverse polarity protection Free-wheeling diode Protective circuit/component Polarity protection diode Damping diode Transmission frequency 300 Hz Power dissipation for nominal condition 0.2 W Output data Output voltage range 3 V DC ... 48 V DC Limiting continuous current 100 mA Voltage drop at max. limiting continuous current 1V Output circuit 2-wire, floating Type of protection Reverse polarity protection Surge protection Protective circuit/component Polarity protection diode General Test voltage input/output 2.5 kV (50 Hz, 1 min.) Mounting position any Assembly instructions In rows with zero spacing Operating mode 100% operating factor Flammability rating according to UL 94 V0 UL, USA Class I, Zone 2, AEx nA nC IIC T6 UL, USA/Canada Class I, Div. 2, Groups A, B, C, D UL, Canada Class I, Zone 2, Ex nA nC IIC Gc T6 X Connection data Connection name Input side Connection method Screw connection Stripping length 8 mm 05/21/2019 Page 2 / 12 https://www.phoenixcontact.com/us/products/5603261 Optocoupler - PLC-OSC- 24DC/ 48DC/100/C1D2 - 5603261 Technical data Connection data Screw thread M3 Conductor cross section solid 0.14 mm ... 2.5 mm Conductor cross section flexible 0.14 mm ... 2.5 mm Conductor cross section AWG 26 ... 14 Connection data 2 Connection name Output side Connection method Screw connection Stripping length 8 mm Screw thread M3 Conductor cross section solid 0.14 mm ... 2.5 mm Conductor cross section flexible 0.14 mm ... 2.5 mm Conductor cross section AWG 26 ... 14 Standards and Regulations Designation Standards/regulations Standards/regulations IEC 60664 EN 50178 Insulation Basic insulation Degree of pollution 2 Overvoltage category III Flammability rating according to UL 94 V0 Conformance CE-compliant UL, USA Class I, Zone 2, AEx nA nC IIC T6 UL, USA/Canada Class I, Div. 2, Groups A, B, C, D UL, Canada Class I, Zone 2, Ex nA nC IIC Gc T6 X Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings 05/21/2019 Page 3 / 12 https://www.phoenixcontact.com/us/products/5603261 Optocoupler - PLC-OSC- 24DC/ 48DC/100/C1D2 - 5603261 Circuit diagram A2 13+ A1 14 Classifications eCl@ss eCl@ss 5.0 27371001 eCl@ss 5.1 27371001 eCl@ss 6.0 27371604 eCl@ss 7.0 27371604 eCl@ss 8.0 27371604 eCl@ss 9.0 27371604 ETIM ETIM 2.0 EC001504 ETIM 3.0 EC001504 ETIM 4.0 EC001504 ETIM 5.0 EC001504 ETIM 6.0 EC001504 UNSPSC UNSPSC 6.01 30211916 UNSPSC 7.0901 39121542 UNSPSC 11 39121542 UNSPSC 12.01 39121542 UNSPSC 13.2 39122326 Approvals Approvals Approvals EAC 05/21/2019 Page 4 / 12 https://www.phoenixcontact.com/us/products/5603261 Optocoupler - PLC-OSC- 24DC/ 48DC/100/C1D2 - 5603261 Approvals Ex Approvals UL Listed / cUL Listed / cULus Listed Approval details EAC RU CDE.A*30.B.01082 Accessories Accessories Bridge Continuous plug-in bridge - FBST 500-PLC RD - 2966786 Continuous plug-in bridge, length: 500 mm, color: red Continuous plug-in bridge - FBST 500-PLC BU - 2966692 Continuous plug-in bridge, length: 500 mm, color: blue Continuous plug-in bridge - FBST 500-PLC GY - 2966838 Continuous plug-in bridge, length: 500 mm, color: gray 05/21/2019 Page 5 / 12 https://www.phoenixcontact.com/us/products/5603261 Optocoupler - PLC-OSC- 24DC/ 48DC/100/C1D2 - 5603261 Accessories Single plug-in bridge - FBST 6-PLC RD - 2966236 Single plug-in bridge, length: 6 mm, number of positions: 2, color: red Single plug-in bridge - FBST 6-PLC BU - 2966812 Single plug-in bridge, length: 6 mm, number of positions: 2, color: blue Single plug-in bridge - FBST 6-PLC GY - 2966825 Single plug-in bridge, length: 6 mm, number of positions: 2, color: gray Single plug-in bridge - FBST 8-PLC GY - 2967688 Single plug-in bridge, length: 8 mm, number of positions: 2, color: gray Single plug-in bridge - FBST 14-PLC BK - 2967691 Single plug-in bridge, length: 14 mm, number of positions: 2, color: black DIN rail 05/21/2019 Page 6 / 12 https://www.phoenixcontact.com/us/products/5603261 Optocoupler - PLC-OSC- 24DC/ 48DC/100/C1D2 - 5603261 Accessories DIN rail, unperforated - NS 35/ 7,5 V2A UNPERF 2000MM - 0801377 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Stainless steel V2A, uncoated, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/ 7,5 V2A UNPERF 2000MM - 0801377 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Stainless steel V2A, uncoated, length: 2000 mm, color: silver DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored 05/21/2019 Page 7 / 12 https://www.phoenixcontact.com/us/products/5603261 Optocoupler - PLC-OSC- 24DC/ 48DC/100/C1D2 - 5603261 Accessories DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored 05/21/2019 Page 8 / 12 https://www.phoenixcontact.com/us/products/5603261 Optocoupler - PLC-OSC- 24DC/ 48DC/100/C1D2 - 5603261 Accessories DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver 05/21/2019 Page 9 / 12 https://www.phoenixcontact.com/us/products/5603261 Optocoupler - PLC-OSC- 24DC/ 48DC/100/C1D2 - 5603261 Accessories DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver Labeled terminal marker Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm 05/21/2019 Page 10 / 12 https://www.phoenixcontact.com/us/products/5603261 Optocoupler - PLC-OSC- 24DC/ 48DC/100/C1D2 - 5603261 Accessories Partition plate Separating plate - PLC-ATP BK - 2966841 Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101, isolation Separating plate - PLC-ATP BK - 2966841 Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101, isolation Terminal marking Zack marker strip - ZB 6/WH-100:UNBEDRUCKT - 5060935 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm Zack marker strip - ZB 6/WH-100:UNBEDRUCKT - 5060935 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm Zack marker strip - ZB 6:UNBEDRUCKT - 1051003 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm 05/21/2019 Page 11 / 12 https://www.phoenixcontact.com/us/products/5603261 Optocoupler - PLC-OSC- 24DC/ 48DC/100/C1D2 - 5603261 Accessories Zack marker strip - ZB 6:UNBEDRUCKT - 1051003 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm Marker for terminal blocks - UC-TM 6 - 0818085 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm Marker for terminal blocks - UCT-TM 6 - 0828736 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm Spare parts Miniature solid-state relay - OPT-24DC/ 48DC/100 - 2966618 Plug-in miniature solid-state relay, input solid-state relay, 1 N/O contact, input: 24 V DC, output: 3 - 48 V DC/100 mA Phoenix Contact 2019 (c) - all rights reserved http://www.phoenixcontact.com 05/21/2019 Page 12 / 12