https://www.phoenixcontact.com/us/products/2900445 Relay base-PLC-BPT- 24DC/21-2900445 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) 6.2 mm PLC basic terminal block with push-in connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 24 V DC Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356507592 Weight per Piece (excluding packing) 32.000 g Custom tariff number 85366990 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Type of note Notes on operation Note Separating plate PLC-ATP must be installed for voltages larger than 250V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or FBST 500.... Dimensions Width 6.2 mm Height 80 mm Depth 94 mm Ambient conditions 01/19/2021Page1/15 https://www.phoenixcontact.com/us/products/2900445 Relay base-PLC-BPT- 24DC/21-2900445 Technical data Ambient conditions Ambient temperature (operation) -40 C ... 60 C Ambient temperature (storage/transport) -40 C ... 85 C Input data Nominal input voltage UN 24 VDC Status display LED Protective circuit Damping diode, polarity protection diode Damping diode General Protective circuit Damping diode, polarity protection diode Operating mode 100% operating factor Color gray Flammability rating according to UL 94 V0 (Housing) Mounting position any Connection data Connection name Input side Connection method Push-in connection Stripping length 10 mm Conductor cross section solid 0.14 mm ... 2.5 mm Conductor cross section flexible 0.14 mm ... 2.5 mm 0.2 mm ... 2.5 mm (Single ferrule) 2x 0.5 mm ... 1 mm (TWIN ferrule) Conductor cross section AWG 26 ... 14 Connection data 2 Connection name Output side Connection method Push-in connection Stripping length 10 mm Conductor cross section solid 0.14 mm ... 2.5 mm Conductor cross section flexible 0.14 mm ... 2.5 mm 0.2 mm ... 2.5 mm (Single ferrule) 2x 0.5 mm ... 1 mm (TWIN ferrule) Conductor cross section AWG 26 ... 14 Standards and Regulations Connection in acc. with standard CUL Conformance/approvals Designation Corrosive gas test 01/19/2021Page2/15 https://www.phoenixcontact.com/us/products/2900445 Relay base-PLC-BPT- 24DC/21-2900445 Technical data Conformance/approvals Identification ISA-S71.04. G3 Harsh Group EN60068-2-60 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Classifications eCl@ss eCl@ss 10.0.1 27371603 eCl@ss 11.0 27371603 eCl@ss 4.0 27371000 eCl@ss 4.1 27371000 eCl@ss 5.0 27371600 eCl@ss 5.1 27371600 eCl@ss 6.0 27371600 eCl@ss 7.0 27371603 eCl@ss 8.0 27371603 eCl@ss 9.0 27371603 ETIM ETIM 2.0 EC001456 ETIM 3.0 EC001456 ETIM 4.0 EC001456 ETIM 5.0 EC001456 ETIM 6.0 EC001456 ETIM 7.0 EC001456 UNSPSC UNSPSC 6.01 30211917 UNSPSC 7.0901 39121516 UNSPSC 11 39121516 UNSPSC 12.01 39121516 UNSPSC 13.2 39122326 UNSPSC 18.0 39122335 UNSPSC 19.0 39122335 01/19/2021Page3/15 https://www.phoenixcontact.com/us/products/2900445 Relay base-PLC-BPT- 24DC/21-2900445 Classifications UNSPSC UNSPSC 20.0 39122335 UNSPSC 21.0 39122335 Approvals Approvals Approvals DNV GL / UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals Approval details DNV GL https://approvalfinder.dnvgl.com/ TAE0000196-03 UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 EAC RU D-DE.B*00573/18 cULus Recognized Accessories Accessories 01/19/2021Page4/15 https://www.phoenixcontact.com/us/products/2900445 Relay base-PLC-BPT- 24DC/21-2900445 Accessories Bridge Continuous plug-in bridge-FBST 500-PLC RD-2966786 Continuous plug-in bridge, length: 500 mm, color: red Continuous plug-in bridge-FBST 500-PLC BU-2966692 Continuous plug-in bridge, length: 500 mm, color: blue Continuous plug-in bridge-FBST 500-PLC GY-2966838 Continuous plug-in bridge, length: 500 mm, color: gray Single plug-in bridge-FBST 6-PLC RD-2966236 Single plug-in bridge, length: 6 mm, number of positions: 2, color: red Single plug-in bridge-FBST 6-PLC BU-2966812 Single plug-in bridge, length: 6 mm, number of positions: 2, color: blue 01/19/2021Page5/15 https://www.phoenixcontact.com/us/products/2900445 Relay base-PLC-BPT- 24DC/21-2900445 Accessories Single plug-in bridge-FBST 6-PLC GY-2966825 Single plug-in bridge, length: 6 mm, number of positions: 2, color: gray Single plug-in bridge-FBST 8-PLC GY-2967688 Single plug-in bridge, length: 8 mm, number of positions: 2, color: gray Controller board System connection-PLC-V8/FLK14/OUT-2295554 V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of output cards, connection 1: Screw connection 1x, connection 2: IDC/FLK pin strip 1x 14-position, connection 3: Plug connection (Can be snapped onto 8x PLC-INTERFACE terminals), number of channels: 8, control logic: positive switching System connection-PLC-V8/FLK14/OUT/M-2304102 V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of output cards, connection 1: Screw connection 1x, connection 2: IDC/FLK pin strip 1x 14-position, connection 3: Plug connection (Can be snapped onto 8x PLC-INTERFACE terminals), number of channels: 8, control logic: negative switching Adapter module-PLC-V8/D15S/OUT-2296058 V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of output cards, connection 1: Screw connection 1x, connection 2: D-SUB pin strip 1x 15-position, connection 3: Plug connection (Can be snapped onto 8x PLC-INTERFACE terminals), number of channels: 8, control logic: positive switching 01/19/2021Page6/15 https://www.phoenixcontact.com/us/products/2900445 Relay base-PLC-BPT- 24DC/21-2900445 Accessories System connection-PLC-V8/D15B/OUT-2296061 V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of output cards, connection 1: Screw connection 1x, connection 2: D-SUB socket strip 1x 15-position, connection 3: Plug connection (Can be snapped onto 8x PLC-INTERFACE terminals), number of channels: 8, control logic: positive switching DIN rail DIN rail perforated-NS 35/ 7,5 PERF 2000MM-0801733 DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 UNPERF 2000MM-0801681 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail perforated-NS 35/ 7,5 WH PERF 2000MM-1204119 DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 WH UNPERF 2000MM-1204122 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver 01/19/2021Page7/15 https://www.phoenixcontact.com/us/products/2900445 Relay base-PLC-BPT- 24DC/21-2900445 Accessories DIN rail, unperforated-NS 35/ 7,5 AL UNPERF 2000MM-0801704 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Aluminum, uncoated, length:2000 mm, color:silver DIN rail perforated-NS 35/ 7,5 ZN PERF 2000MM-1206421 DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 ZN UNPERF 2000MM-1206434 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 CU UNPERF 2000MM-0801762 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Copper, uncoated, length:2000 mm, color:copper-colored End cap-NS 35/ 7,5 CAP-1206560 DIN rail end piece, for DIN rail NS 35/7.5 01/19/2021Page8/15 https://www.phoenixcontact.com/us/products/2900445 Relay base-PLC-BPT- 24DC/21-2900445 Accessories DIN rail perforated-NS 35/15 PERF 2000MM-1201730 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 UNPERF 2000MM-1201714 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail perforated-NS 35/15 WH PERF 2000MM-0806602 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 WH UNPERF 2000MM-1204135 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 AL UNPERF 2000MM-1201756 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Aluminum, uncoated, length:2000 mm, color:silver 01/19/2021Page9/15 https://www.phoenixcontact.com/us/products/2900445 Relay base-PLC-BPT- 24DC/21-2900445 Accessories DIN rail perforated-NS 35/15 ZN PERF 2000MM-1206599 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 ZN UNPERF 2000MM-1206586 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 CU UNPERF 2000MM-1201895 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Copper, uncoated, length:2000 mm, color:copper-colored End cap-NS 35/15 CAP-1206573 DIN rail end piece, for DIN rail NS 35/15 DIN rail, unperforated-NS 35/15-2,3 UNPERF 2000MM-1201798 DIN rail, unperforated, Standard profile 2.3mm, width:35 mm, height:15 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver Labeled terminal marker 01/19/2021Page10/15 https://www.phoenixcontact.com/us/products/2900445 Relay base-PLC-BPT- 24DC/21-2900445 Accessories Zack marker strip-ZB 6 CUS-0824992 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Zack marker strip-ZB 6,LGS:FORTL.ZAHLEN-1051016 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Zack marker strip-ZB 6,QR:FORTL.ZAHLEN-1051029 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Zack marker strip-ZB 6,LGS:GLEICHE ZAHLEN-1051032 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks-ZB 6,LGS:L1-N,PE-1051414 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 01/19/2021Page11/15 https://www.phoenixcontact.com/us/products/2900445 Relay base-PLC-BPT- 24DC/21-2900445 Accessories Marker for terminal blocks-ZB 6,LGS:U-N-1051430 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: U, V, W, N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks-UC-TM 6 CUS-0824589 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80 Marker for terminal blocks-UCT-TM 6 CUS-0829602 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60 Partition plate Separating plate-PLC-ATP BK-2966841 Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101, isolation Power module Power terminal block-PLC-ESK GY-2966508 Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5 01/19/2021Page12/15 https://www.phoenixcontact.com/us/products/2900445 Relay base-PLC-BPT- 24DC/21-2900445 Accessories Screwdriver tools Screwdriver-SZF 1-0,6X3,5-1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip Terminal marking Zack marker strip-ZB 6:UNBEDRUCKT-1051003 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks-UC-TM 6-0818085 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80 Marker for terminal blocks-UCT-TM 6-0828736 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER, BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 60 Necessary add-on products 01/19/2021Page13/15 https://www.phoenixcontact.com/us/products/2900445 Relay base-PLC-BPT- 24DC/21-2900445 Accessories Single relay-REL-MR- 24DC/21-2961105 Plug-in miniature power relay, with power contact, 1 PDT, input voltage 24 V DC Single relay-REL-MR- 24DC/21AU-2961121 Plug-in miniature power relay, with multi-layer gold contact, 1 PDT, input voltage 24 V DC Miniature solid-state relay-OPT-24DC/ 24DC/ 2-2966595 Plug-in miniature solid-state relay, power solid-state relay, 1 N/O contact, input: 24 V DC, output: 3 ... 33 V DC/3 A Miniature solid-state relay-OPT-24DC/ 48DC/100-2966618 Plug-in miniature solid-state relay, input solid-state relay, 1 N/O contact, input: 24 V DC, output: 3 - 48 V DC/100 mA Miniature solid-state relay-OPT-24DC/230AC/ 1-2967950 Plug-in miniature solid-state relay, power solid-state relay, 1 N/O contact, input: 24 V DC, output: 24 - 253 V AC/0.75 A 01/19/2021Page14/15 https://www.phoenixcontact.com/us/products/2900445 Phoenix Contact 2021 (c) - all rights reserved http://www.phoenixcontact.com 01/19/2021Page15/15