https://www.phoenixcontact.com/us/products/2900445
01/19/2021Page1/15
Relay base-PLC-BPT- 24DC/21-2900445
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
6.2 mm PLC basic terminal block with push-in connection, without relay or solid-state relay, for mounting on DIN
rail NS 35/7,5, 1 PDT, input voltage 24 V DC
Key Commercial Data
Packing unit 1 pc
GTIN
GTIN 4046356507592
Weight per Piece (excluding packing) 32.000 g
Custom tariff number 85366990
Country of origin Germany
Technical data
Note
Utilization restriction EMC: class A product, see manufacturer's declaration in the download
area
Type of note Notes on operation
Note
Separating plate PLC-ATP must be installed for voltages larger than
250V (L1, L2, L3) between identical terminal blocks in adjacent modules.
Potential bridging is then carried out with FBST 8-PLC... or FBST 500....
Dimensions
Width 6.2 mm
Height 80 mm
Depth 94 mm
Ambient conditions
https://www.phoenixcontact.com/us/products/2900445
01/19/2021Page2/15
Relay base-PLC-BPT- 24DC/21-2900445
Technical data
Ambient conditions
Ambient temperature (operation) -40 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Input data
Nominal input voltage UN24 VDC
Status display LED
Protective circuit Damping diode, polarity protection diode
Damping diode
General
Protective circuit Damping diode, polarity protection diode
Operating mode 100% operating factor
Color gray
Flammability rating according to UL 94 V0 (Housing)
Mounting position any
Connection data
Connection name Input side
Connection method Push-in connection
Stripping length 10 mm
Conductor cross section solid 0.14 mm² ... 2.5 mm²
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1 mm² (TWIN ferrule)
Conductor cross section AWG 26 ... 14
Connection data 2
Connection name Output side
Connection method Push-in connection
Stripping length 10 mm
Conductor cross section solid 0.14 mm² ... 2.5 mm²
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1 mm² (TWIN ferrule)
Conductor cross section AWG 26 ... 14
Standards and Regulations
Connection in acc. with standard CUL
Conformance/approvals
Designation Corrosive gas test
https://www.phoenixcontact.com/us/products/2900445
01/19/2021Page3/15
Relay base-PLC-BPT- 24DC/21-2900445
Technical data
Conformance/approvals
Identification ISA-S71.04. G3 Harsh Group
EN60068-2-60
Environmental Product Compliance
REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Classifications
eCl@ss
eCl@ss 10.0.1 27371603
eCl@ss 11.0 27371603
eCl@ss 4.0 27371000
eCl@ss 4.1 27371000
eCl@ss 5.0 27371600
eCl@ss 5.1 27371600
eCl@ss 6.0 27371600
eCl@ss 7.0 27371603
eCl@ss 8.0 27371603
eCl@ss 9.0 27371603
ETIM
ETIM 2.0 EC001456
ETIM 3.0 EC001456
ETIM 4.0 EC001456
ETIM 5.0 EC001456
ETIM 6.0 EC001456
ETIM 7.0 EC001456
UNSPSC
UNSPSC 6.01 30211917
UNSPSC 7.0901 39121516
UNSPSC 11 39121516
UNSPSC 12.01 39121516
UNSPSC 13.2 39122326
UNSPSC 18.0 39122335
UNSPSC 19.0 39122335
https://www.phoenixcontact.com/us/products/2900445
01/19/2021Page4/15
Relay base-PLC-BPT- 24DC/21-2900445
Classifications
UNSPSC
UNSPSC 20.0 39122335
UNSPSC 21.0 39122335
Approvals
Approvals
Approvals
DNV GL / UL Recognized / cUL Recognized / EAC / cULus Recognized
Ex Approvals
Approval details
DNV GL https://approvalfinder.dnvgl.com/ TAE0000196-03
UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705
cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705
EAC RU D-DE.B*00573/18
cULus Recognized
Accessories
Accessories
https://www.phoenixcontact.com/us/products/2900445
01/19/2021Page5/15
Relay base-PLC-BPT- 24DC/21-2900445
Accessories
Bridge
Continuous plug-in bridge-FBST 500-PLC RD-2966786
Continuous plug-in bridge, length: 500 mm, color: red
Continuous plug-in bridge-FBST 500-PLC BU-2966692
Continuous plug-in bridge, length: 500 mm, color: blue
Continuous plug-in bridge-FBST 500-PLC GY-2966838
Continuous plug-in bridge, length: 500 mm, color: gray
Single plug-in bridge-FBST 6-PLC RD-2966236
Single plug-in bridge, length: 6 mm, number of positions: 2, color: red
Single plug-in bridge-FBST 6-PLC BU-2966812
Single plug-in bridge, length: 6 mm, number of positions: 2, color: blue
https://www.phoenixcontact.com/us/products/2900445
01/19/2021Page6/15
Relay base-PLC-BPT- 24DC/21-2900445
Accessories
Single plug-in bridge-FBST 6-PLC GY-2966825
Single plug-in bridge, length: 6 mm, number of positions: 2, color: gray
Single plug-in bridge-FBST 8-PLC GY-2967688
Single plug-in bridge, length: 8 mm, number of positions: 2, color: gray
Controller board
System connection-PLC-V8/FLK14/OUT-2295554
V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of output cards, connection 1: Screw
connection 1x, connection 2: IDC/FLK pin strip 1x 14-position, connection 3: Plug connection (Can be snapped onto 8x
PLC-INTERFACE terminals), number of channels: 8, control logic: positive switching
System connection-PLC-V8/FLK14/OUT/M-2304102
V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of output cards, connection 1: Screw
connection 1x, connection 2: IDC/FLK pin strip 1x 14-position, connection 3: Plug connection (Can be snapped onto 8x
PLC-INTERFACE terminals), number of channels: 8, control logic: negative switching
Adapter module-PLC-V8/D15S/OUT-2296058
V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of output cards, connection 1: Screw
connection 1x, connection 2: D-SUB pin strip 1x 15-position, connection 3: Plug connection (Can be snapped onto 8x
PLC-INTERFACE terminals), number of channels: 8, control logic: positive switching
https://www.phoenixcontact.com/us/products/2900445
01/19/2021Page7/15
Relay base-PLC-BPT- 24DC/21-2900445
Accessories
System connection-PLC-V8/D15B/OUT-2296061
V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of output cards, connection 1: Screw
connection 1x, connection 2: D-SUB socket strip 1x 15-position, connection 3: Plug connection (Can be snapped onto 8x
PLC-INTERFACE terminals), number of channels: 8, control logic: positive switching
DIN rail
DIN rail perforated-NS 35/ 7,5 PERF 2000MM-0801733
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 UNPERF 2000MM-0801681
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail perforated-NS 35/ 7,5 WH PERF 2000MM-1204119
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white
passivated, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 WH UNPERF 2000MM-1204122
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized,
white passivated, length:2000 mm, color:silver
https://www.phoenixcontact.com/us/products/2900445
01/19/2021Page8/15
Relay base-PLC-BPT- 24DC/21-2900445
Accessories
DIN rail, unperforated-NS 35/ 7,5 AL UNPERF 2000MM-0801704
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Aluminum, uncoated,
length:2000 mm, color:silver
DIN rail perforated-NS 35/ 7,5 ZN PERF 2000MM-1206421
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 ZN UNPERF 2000MM-1206434
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 CU UNPERF 2000MM-0801762
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Copper, uncoated,
length:2000 mm, color:copper-colored
End cap-NS 35/ 7,5 CAP-1206560
DIN rail end piece, for DIN rail NS 35/7.5
https://www.phoenixcontact.com/us/products/2900445
01/19/2021Page9/15
Relay base-PLC-BPT- 24DC/21-2900445
Accessories
DIN rail perforated-NS 35/15 PERF 2000MM-1201730
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 UNPERF 2000MM-1201714
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail perforated-NS 35/15 WH PERF 2000MM-0806602
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized,
white passivated, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 WH UNPERF 2000MM-1204135
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized,
white passivated, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 AL UNPERF 2000MM-1201756
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Aluminum,
uncoated, length:2000 mm, color:silver
https://www.phoenixcontact.com/us/products/2900445
01/19/2021Page10/15
Relay base-PLC-BPT- 24DC/21-2900445
Accessories
DIN rail perforated-NS 35/15 ZN PERF 2000MM-1206599
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 ZN UNPERF 2000MM-1206586
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 CU UNPERF 2000MM-1201895
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Copper, uncoated,
length:2000 mm, color:copper-colored
End cap-NS 35/15 CAP-1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated-NS 35/15-2,3 UNPERF 2000MM-1201798
DIN rail, unperforated, Standard profile 2.3mm, width:35 mm, height:15 mm, acc. to EN 60715, material:Steel,
galvanized, passivated with a thick layer, length:2000 mm, color:silver
Labeled terminal marker
https://www.phoenixcontact.com/us/products/2900445
01/19/2021Page11/15
Relay base-PLC-BPT- 24DC/21-2900445
Accessories
Zack marker strip-ZB 6 CUS-0824992
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10
Zack marker strip-ZB 6,LGS:FORTL.ZAHLEN-1051016
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2
mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10
Zack marker strip-ZB 6,QR:FORTL.ZAHLEN-1051029
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers
1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm,
lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10
Zack marker strip-ZB 6,LGS:GLEICHE ZAHLEN-1051032
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical numbers 1
or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15
x 10.5 mm, Number of individual labels: 10
Marker for terminal blocks-ZB 6,LGS:L1-N,PE-1051414
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: L1, L2, L3, N, PE,
L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x
10.5 mm, Number of individual labels: 10
https://www.phoenixcontact.com/us/products/2900445
01/19/2021Page12/15
Relay base-PLC-BPT- 24DC/21-2900445
Accessories
Marker for terminal blocks-ZB 6,LGS:U-N-1051430
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: U, V, W,
N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field
size: 6.15 x 10.5 mm, Number of individual labels: 10
Marker for terminal blocks-UC-TM 6 CUS-0824589
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual
labels: 80
Marker for terminal blocks-UCT-TM 6 CUS-0829602
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual
labels: 60
Partition plate
Separating plate-PLC-ATP BK-2966841
Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual
separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101,
isolation
Power module
Power terminal block-PLC-ESK GY-2966508
Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5
https://www.phoenixcontact.com/us/products/2900445
01/19/2021Page13/15
Relay base-PLC-BPT- 24DC/21-2900445
Accessories
Screwdriver tools
Screwdriver-SZF 1-0,6X3,5-1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-
component grip, with non-slip grip
Terminal marking
Zack marker strip-ZB 6:UNBEDRUCKT-1051003
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels:
10
Marker for terminal blocks-UC-TM 6-0818085
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80
Marker for terminal blocks-UCT-TM 6-0828736
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER,
BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size:
5.6 x 10.5 mm, Number of individual labels: 60
Necessary add-on products
https://www.phoenixcontact.com/us/products/2900445
01/19/2021Page14/15
Relay base-PLC-BPT- 24DC/21-2900445
Accessories
Single relay-REL-MR- 24DC/21-2961105
Plug-in miniature power relay, with power contact, 1 PDT, input voltage 24 V DC
Single relay-REL-MR- 24DC/21AU-2961121
Plug-in miniature power relay, with multi-layer gold contact, 1 PDT, input voltage 24 V DC
Miniature solid-state relay-OPT-24DC/ 24DC/ 2-2966595
Plug-in miniature solid-state relay, power solid-state relay, 1 N/O contact, input: 24 V DC, output: 3 ... 33 V DC/3 A
Miniature solid-state relay-OPT-24DC/ 48DC/100-2966618
Plug-in miniature solid-state relay, input solid-state relay, 1 N/O contact, input: 24 V DC, output: 3 - 48 V DC/100 mA
Miniature solid-state relay-OPT-24DC/230AC/ 1-2967950
Plug-in miniature solid-state relay, power solid-state relay, 1 N/O contact, input: 24 V DC, output: 24 - 253 V AC/0.75 A
https://www.phoenixcontact.com/us/products/2900445
01/19/2021Page15/15
Phoenix Contact 2021 © - all rights reserved
http://www.phoenixcontact.com