ADVANCE INFORMATION All information in this data sheet is preliminary and subject to change. sor MA AXLAA Low-Power, Dual, 13-Bit Voltage-Output DACs with Configurable Output General Description The MAX5152/MAX5153 low-power, serial, voltage- output, dual, 13-bit digital-to-analog converters (DACs) consume only 500uA from a single +5V (MAX5152) or +3V (MAX5153) supply. These devices feature Rail-to- Rail output swing and are available in a space-saving 16-pin QSOP package. Access to the output amplifiers inverting input allows for specific gain configurations, remote sensing, and high output current capability, mak- ing these devices ideal for industrial process controls. They are also well suited for digitally programmable, 4-20mA current loops. The 3-wire serial interface is SPI/QSPI and Microwire compatible. Each DAC has a double- buffered input organized as an input register followed by a DAC register, which allcws the input and DAC registers to be updated independently or simultaneously. Additional features includ a 2uA programmable shut- down, a hardware-shutdewn lockout, a separate voltage reference input for each DAC that accepts AC and DC signals, and an active-low clear input (CL) that resets all registers and DACs to zero. These devices provide a pro- grammable logic pin for edded functionality and a serial- data output pin for daisy-chaining. Applications Motion Control Remote Industrial Controls pP-Controlled Systerns Automatic Test Equipment industrial Process Control Digital Offset and Gain Adjustment Digitally Programmable, 4-20mA Current Loops Features 13-Bit Dual DAC with Configurable Output Amplifiers Raii-to-Rail Output Swing + 16ys Settling Time Single-Supply Operation: +5V (MAX5152) +3V (MAX5153) # Low Quiescent Current: 500uA (normal operation) 2A (shutdown mode) SPI/QSPI and Microwire Compatible Space-Saving 16-Pin QSOP Package > # Power-On Reset Clears DAC Outputs to Zero Ordering Information PART TEMP.RANGE pIN-packace _'NL (LSB) MAXS152ACPE OC to +70C = 16 Plastic DIP + 1/2 MAX5152BCPE OC to +70C =: 16 Plastic DIP +1 MAXS152ACEE = OC to 70C. = 1G QSOP +1/2 MAX51528CPE C to+70C 16 QSOP +t MAX5152BC/D OC to +70C_Dice* 1 Ordering Information continued on next page. Dice are tested at Ta = +25C, DC parameters only. Functional Diagram o pout = tL POL DGND AGND DECODE CONTROL 16-BIT SHIFT REGISTER DIN = SCLK uPO Vpo REFA DAC A DACA OUTA MAAXIAA MAX5152 FBA MAX5153 DACB OUTB FEB REFB Rail-to-Rail is a registered trademark of Nippon Motorola Ltd, Microwire is a trademark of National Semiconductor Corp. SPI and QSPI are trademarks of Motorola, Inc. MAXLM Maxim Integrated Products 9-101 For free samples & the latest literature: http:/;www.maxim-ic.com, or phone 1-800-998-8800 For small orders, phone 408-737-7600 ext. 3468. 3 Qn wh, 8 > a W MAX5152/MAX5153 Low-Power, Dual, 13-Bit Voltage-Output DACs with Configurable Output _Ordering Information (continued) Pin Configuration INL PART TEMP.RANGE PIN-PACKAGE (LSB) MAXS152AEPE -40C to +85C = 16 Plastic DIP + 1/2 MAXS152BEPE -40C to+85C = 16 Plastic DIP +4 MAXSIS2AEEE -40C to +85C = 16 QSOP 1/2 MAX5152BEEE -40C to +85C = 16 QSOP +1 MAXS152BMJE -55C to +125C 16 CERDIP +1 MAXS5IS3ACPE = OC to +70C = 16 Plastic DIP +1 MAXS153BCPE O0Cto+70C 16PlasticDIP +2 MAXSI53ACEE 0G to +70C ~=- 16 QSOP +1 MAXS1S3BCPE O0C to +70C_ = 16 QSOP x2 MAXS153BC/D OC to+70C Dice* +2 MAXSIS3AEPE -40C to +85C = 16 Plastic DIP +1 MAXSIS3BEPE -40C to +85C 16 PlasticDIP +2 MAXS1S3AEEE -40C to +85C == 16 QSOP +1 MAXS{S53BEEE -40C to +85C 16 QSOP +2 MAXS153BMJE -55C to +125C = 16 CERDIP +2 Dice are tested at Ta = +25C, DC parameters only. 9-102 TOP VIEW acno [1] 6] Voo oura (2 | 15] cure ea (3) Anaxnaa [14] Foe REFA| 4] MAX5152 43 - [4 MAX5153 sl ree a fs 2] POL, as [a] ri] upo | on [7 | 10] out seux [8] 3] oGNo DIP/QSOP MAAXLLA