MADL-011023-14150T - M/A-COM Technology Solutions

PIN Diode Limiter

10 MHz - 12 GHz

MADL-011023-14150T

Rev. V3

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macomtech.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Features

 3 Terminal LPF Broadband Shunt Structure

 10 MHz - 12 GHz Broadband Frequency

 >50 dBm Peak Power Handling

 >40 dBm CW Power Handling

 <0.2 dB Insertion Loss

 20 dBm Flat Leakage Power

 Lead-Free 1.5 x 1.2 mm 6-lead TDFN Package

 RoHS* Compliant and 260oC Reflow Compatible

Description

The MADL-011023 is a PIN diode limiter assembled

in a lead-free 1.5 x 1.2 mm 6-lead TDFN plastic

package. This PIN diode limiter provides exceptional

low and high signal frequency operation from

10 MHz to 12 GHz.

This device is ideally suited for higher frequency and

lower flat leakage limiter microwave circuit

applications where compact and higher performance

surface mount diode assemblies are required.

Ordering Information1,2

Part Number Package

MADL-011023-14150T 3000 piece reel

MADL-011023-000SMB Sample board

* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.

Functional Schematic

Pin Configuration3

Pin No. Pin Name Description

1 N/C No Connection

2 RFIN RF Input

3 N/C No Connection

4 N/C No Connection

5 RFOUT RF Output

6 N/C No Connection

7 Paddle4 Ground

3. MACOM recommends connecting unused package pins to

ground.

4. The exposed pad centered on the package bottom must be

connected to RF, DC, and thermal ground.

1. Reference Application Note M513 for reel size information.

2. All sample boards include 5 loose parts.

Top view

N/C

RFIN

N/C

RFOUT

GND

PIN Diode Limiter

10 MHz - 12 GHz

MADL-011023-14150T

Rev. V3

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macomtech.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Electrical Specifications: TA = +25°C

Absolute Maximum Ratings6,7

Parameter Absolute Maximum

Peak Incident Power

1 µs pulse, 1% duty @ +85°C 48 dBm

CW Incident Power @ +85°C 37 dBm

Junction Temperature 175°C

Operating Temperature -65°C to +125°C

Storage Temperature -65°C to +150°C

6. Exceeding any one or combination of these limits may cause

permanent damage to this device.

7. MACOM does not recommend sustained operation near these

survivability limits.

Parameter Test Conditions Units Min. Typ. Max.

Insertion Loss P incident = -10 dBm, F = 750 MHz dB — 0.05 0.10

Return Loss P incident = -10 dBm, F = 750 MHz dB — 35 —

P1dB Input Compression Power F = 1 GHz dBm — 8 —

C.W. Incident Power5 F = 1 GHz dBm — 40 —

Peak Incident Power5 1 µs, 1 % duty @ 1 GHz dBm — 50 —

CW Flat Leakage Power F = 1 GHz dBm — 20 —

Pulsed Flat Leakage Power 50 dBm, 1 µs, 1 % duty @ 1 GHz dBm — 26 —

Spike Leakage Power 50 dBm, 1 µs, 1 % duty @ 1 GHz dBm — 28 —

Spike Leakage Energy 50 dBm, 1 µs, 1 % duty @ 1 GHz ergs — 0.1 —

Recovery Time

(1 dB of Insertion Loss) 50 dBm, 1 µs, 1 % duty @ 1 GHz ns — 100 —

Input 3rd Order

Intermodulation Products (IIP3) F1 = 1.000 GHz, F2 = 1.010 GHz @ 0 dBm dBm — 20 —

5. Incident power ratings defined with 1.2:1 source VSWR and 1.2:1 max load VSWR.

PIN Diode Limiter

10 MHz - 12 GHz

MADL-011023-14150T

Rev. V3

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macomtech.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Parts List

PCB Layout PCB Schematic

Part Value Case Style

C1, C2

( DC Blocks ) 100 pF 0402

(DC Return) 27 nH 0402

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

These devices are sensitive to electrostatic

discharge (ESD) and can be damaged by static

electricity. Proper ESD control techniques should

be used when handling these devices.

Lead-Free 1.5 x 1.2 mm 6-Lead TDFN†

† Reference Application Note S2083 for lead-free solder reflow recommendations.

Meets JEDEC moisture sensitivity level 1 requirements.

Plating is 100% matte tin over copper.

C1 C2

RFIN RFOUT

NOTES:

1. REFERENCE JEDEC MO-153-AB FOR ADDITIONAL DIMENSIONAL AND

TOLERANCE INFORMATION.

2. ALL DIMENSIONS SHOWN AS INCHES/MM.

PIN Diode Limiter

10 MHz - 12 GHz

MADL-011023-14150T

Rev. V3

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macomtech.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Typical Performance Curves @ +25°C

Insertion Loss vs. Frequency Return Loss vs. Frequency

Flat Leakage Power @ CW and Pulsed Power,

RF Pulse Width = 1 µs, Duty Cycle = 1% @ 4 GHz

010 20 30 40 50 60

Average Peak Power

Average CW Power

Input Power (dBm)

010 20 30 40 50 60

Average Peak Power

Average CW Power

Input Power (dBm)

-0.5

-0.4

-0.3

-0.2

-0.1

0.0

0 2 4 6 8 10 12

Frequency (GHz)

Flat Leakage Power @ CW and Pulsed Power,

RF Pulse Width = 1 µs, Duty Cycle = 1% @ 1 GHz

-50

-40

-30

-20

-10

0 2 4 6 8 10 12

Frequency (GHz)

PIN Diode Limiter

10 MHz - 12 GHz

MADL-011023-14150T

Rev. V3

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macomtech.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Applications Section

Schematic of 3 Stage Limiter using MADL-011023-14150T and MADP-011029-14150T

F = 1 - 8 GHz, PINC = 47 dBm CW, or 50 dBm, 10 µs, 1 % duty cycle

Part PN Case Style Description Quantity

D1 MADP-011029-14150T ODS-1415 Input PIN Diode 1

D2 MADL-011023-14150T ODS-1415 2nd Stage PIN Diode 1

D3 MADL-011023-14150T ODS-1415 3rd Stage PIN Diode 1

C1, C2 27 pF 0402 DC Block 2

L1 33 nH 0402 DC Return 1

Parts List8

8. Parts list is shown for 1 - 8 GHz operation. Component values can be scaled for various frequency bands.

C1 C2

RFIN RFOUT

D1 D2 D3

PIN Diode Limiter

10 MHz - 12 GHz

MADL-011023-14150T

Rev. V3

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macomtech.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")

products. These materials are provided by MACOM as a service to its customers and may be used for

informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or

in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM

assumes no responsibility for errors or omissions in these materials. MACOM may make changes to

specifications and product descriptions at any time, without notice. MACOM makes no commitment to update

the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future

changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,

to any intellectual property rights is granted by this document.

THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR

IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR

WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR

INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR

OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY

OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN

THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,

WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.

MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM

customers using or selling MACOM products for use in such applications do so at their own risk and agree to

fully indemnify MACOM for any damages resulting from such improper use or sale.