LED..O..M Series Diffused On-Axis
Lights
Uniform Lighting for Machine Vision Applications
Features
• Diffused on-axis illumination for uniform lighting on specular surfaces
• Five light colors
• Two sizes available
• Continuous or strobed operation selectable via sensor software
• Glass dust-covered models available (see table below for models ending
in -D)
• Bracket options available
Models
Ambient
Light Filter
Kit
ConnectionsCable*
Aper-
ture
Size
Color
Model
With Dust Cover**
Without Dust
Cover
FLTR
8 mm male Pico-
style (for direct
0.6 m (2')
attached
pigtail
50 mm
Visible Red (630 nm)LEDRO50M-DLEDRO50M
FLTIInfrared (880 nm)LEDIO50M-DLEDIO50M
connection to
PresencePLUS
P4 sensor)
FLTBBlue (470 nm)LEDBO50M-DLEDBO50M
—White (5500K)LEDWO50M-DLEDWO50M
FLTGGreen (530 nm)LEDGO50M-DLEDGO50M
FLTR
100
mm
Visible Red (630 nm)LEDRO100M-DLEDRO100M
FLTIInfrared (880 nm)LEDIO100M-DLEDIO100M
FLTBBlue (470 nm)LEDBO100M-DLEDBO100M
—White (5500K)LEDWO100M-DLEDWO100M
FLTGGreen (530 nm)LEDGO100M-DLEDGO100M
* Extension cables with flying leads are available for connecting to models other than PresencePLUS P4.
** Optical glass anti-reflective coating, both sides
0 126059 5
02/2012P/N 126059 rev. J
Specifications
DescriptionFeature
Visible red LED (630 nm), Infrared (880 nm), Blue (470 nm), White (5500 K), or Green
(530 nm), depending on model
Light Source
24V dc ± 10% 500 mA max., 125 mA max for 50 mm models. Direct connect to Pres-
encePLUS P4 sensor operating at 24V dc only.
Supply Voltage and
Current
Housing: Aluminum with black anodizing
Construction Beam Splitter: Optical glass with optical coatings on both sides.
Diffuser: High-precision cast acrylic
Dust Cover: Optical glass with broadband anti-reflective coating (425 – 675 nm) (some
models)
When operated within specifications, output will decrease less than 20% after 10,000
hours and less than 30% after 20,000 hours (based on continuous operation). NOTE:
Actual useful life of strobed lights depends on duty cycle.
Useful Life
Temperature: 0° to +50° C (+32° to +122° F)
Maximum Relative Humidity: 90% at 50° C (non-condensing)
Operating Conditions
Regularly remove any dust, dirt, or fingerprints from the light source:
1. Blow off dust using anti-static compressed air.
Cleaning Instructions 2. If necessary, use a lens cloth and lens cleaner or window cleaner to wipe off remaining
debris.
Do not use any other chemicals for cleaning.
Before installing an on-axis light, it is recommended that the listed ambient light filter be
installed behind the camera lens.
Installation Note
The filter improves image quality by reducing unwanted ambient light.
100 mm models: 50 x 50 mm suggested field of view and 25 mm minimum suggested
stand off
50 mm models: 25 x 25 mm suggested field of view and 25 mm minimum suggested
stand off
P/N 126059 rev. -Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
2
LED..O..M Series Diffused On-Axis Lights
Dimensions
Housing
Dust Cover
(optional –
see models
table) Diffuser
Beam Splitter
View with side plate removed
50 mm Models
147.8 mm (5.82")
87.5 mm (3.44")
29.9 mm (1.18")
29.9 mm (1.18")
5.5 mm (0.22")
4X 1/4-20 UNC
29.6 mm
(1.17")
38.1 mm
(1.50")
59.8 mm
(2.36")
3X 1/4-20
UNC
10.9 mm (0.43")
114.5 mm (4.5")
59.3 mm (2.33")
3Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
P/N 126059 rev.-
LED..O..M Series Diffused On-Axis Lights
100 mm Models
178.0 mm (7.01")
109.3 mm (4.30")
190.3 mm (7.49")
109.9 mm (4.33")
38.1 mm
(1.50")
35.9 mm (1.41")
54.9 mm (2.16")
54.6 mm (2.15")
5.5 mm (0.22")
138.0 mm (5.43")
3X 1/4-20
UNC
54.9 mm (2.16")
4X 1/4-20 UNC
Wiring Table
External Power Supply
(Continuous)
External Power Supply (Strobed)
PresencePLUS Pro Con-
troller Terminal Block
On-Axis Light Wire
+V+VPin 1, +V (24V dc ±10%)Brown
-V-VPin 2, -V (dc common)Blue
-V
OFF+5 to 24V dc
Pin 4 (strobe)Black
ON-V
P/N 126059 rev.-Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
4
LED..O..M Series Diffused On-Axis Lights
Quick Disconnect Cables
ConnectionLengthModel
Female Pico-style (8 mm) connector at one end; flying leads at
opposite end
2 m (6.5')PKG3M-2
4 m (13')PKG3M-4
7 m (23')PKG3M-7
9 m (30')PKG3M-9
Mounting Brackets
SMBP4OAL100
• For use with right-angle or in-line P4 sensors
and 100 mm on-axis light
• Centers lens on light opening
• Black zinc-plated steel
• (4) M5 and (4) ¼-20 socket drive, button-head
screws included
SMBP-
POAL100
• For use with Pro sensors and 100 mm on-axis
light
• Centers lens on light opening
• Black zinc-plated steel
• (4) M5 and (4) ¼-20 socket drive, button-head
screws included
SMBP4OAL50
• For use with right-angle or in-line P4 sensors
and 50 mm on-axis light
• Centers lens on light opening
• Black anodized aluminum and zinc-plated steel
• (4) M3 flat head torx, (4) M5 and (4) ¼-20
socket drive, button-head screws included
5Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
P/N 126059 rev. -
LED..O..M Series Diffused On-Axis Lights
SMBP-
POAL50
• For use with Pro sensors and 50 mm on-axis
light
• Centers lens on light opening
• Black zinc-plated steel
• (4) M5 and (4) ¼-20 socket drive, button-head
screws included
Refer to your current Banner Sensors catalog for more mounting bracket options. Bracket dimensions can be found
at www.bannerengineering.com.
LED..O..M Series Diffused On-Axis Lights
Banner Engineering Corp Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year
following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its
manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty
period.This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of
the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR
IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEAL-
ING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO
EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR
ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR
SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE
THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY,
NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming
any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp.
