flexibility C O R P O R A T I O N S E R I E S UPF105 Series Universal Input Power Factor Corrected 120 Watt Switchers * Active Power Factor Correction (PFC) * 75% typical efficiency * EN55022-B conducted * Up to 4 outputs * Compact 6.0" x 3.3" x 1.4" size * UL, cUL, TUV and CE * CB test certificate and report * Optional cover *41920 Christy Street *Fremont, California *94538-3158 *510-657-2635 Fax: 510-657-6634 sales@digipwr.com www.digipwr.com The UPF105 series are economical, high efficiency open frame switchers that deliver up to 120W continuous or 130W peak power from one to four outputs. The supply includes active power factor correction and 90-250Vac universal input, making it ideal for use worldwide. The UPF105 is one of the flexibility series. In addition to the models listed on this sheet, many potential models are available that include full safety agency approval and do not require any non-recurring engineering (NRE) charge. Prototype delivery is just a few weeks. Flexibility options include a cover. Output voltage options are given in the table below. Fully custom models are also available. Contact the factory for details. This 120W series is also available without power factor correction (US100) and with dc input (DP100). These two products are 100W series and are slightly smaller than the UPF105. Specifications are subject to change without prior notice. Available Models Model Number UPF105-105 UPF105-124 UPF105-148 UPF105-230 UPF105-301 Notes: 1 At least 20% of maximum output current (Im) is required to maintain stated regulation. Supply remains on at zero load, but regulation is not guaranteed. 2 Convection cooling, 80W maximum9 3 Forced air cooling, 120W maximum9 4 Peak output, no post regulation, 30 sec max 5 The UPF105 series allows very fast flexible modified standard designs within these parameters without non-recurring engineering charges and while retaining safety agency approvals. Please contact the factory for details. 6 Can be specified in 0.1V increments 7 Can be specified in 0.75V increments 8 Operational extremes per safety agency testing 9 Cooling requirements may differ between models; contact the factory for details. 10 With optional post regulation on V4 UPF105-401 UPF105-405 UPF105-408 Modified standard flexibility output options5 Output Output Voltage V1 5V V1 24V V1 48V V1 3.3V V2 5V V1 5V V2 12V V3 12V V1 5V V2 12V V3 12V V4 5V V1 3.3V V2 15V V3 24V V4 5V V1 5V V2 15V V3 15V V4 24V V1 2.5 to 48V6 V2 2 to 48V7 V3 2 to 48V7 V4 2 to 48V7 Output Current Ratings Min Max2 Max3(Im) Peak4 0A 12A 16A 20A 0A 3.3A 5A 5.4A 0A 1.6A 2.5A 2.7A 0A 10A 16A 20A 0A 5A 7A 8A 0A 8A 10A 12A 0A 3A 6A 7A 0A 1A 2A 3A 0A 8A 10A 12A 0A 3A 6A 7A 0A 1A 2A 3A 0A 1A 2A 3A 0A 12A 15A 18A 0A 1A 2A 3A 0A 1A 2A 2.5A 0A 2A 5A 6A 0A 10A 13A 15A 0A 1A 2A 2.5A 0A 1A 2A 2.5A 0A 0.5A 1A 1.5A 12A 16A 4A 7A 2A 5A 2A 5A 1 Specifications Specifications are typical at 25C unless otherwise designated. Parameter Limits Input Input Voltage Range Parameter 80W, natural convection cooling9 120W, forced air cooling9 130W peak 0.5%, Vin (min) to Vin (max) 1% (V1, 20% to 100% Im) 5% (V2, V3, V4, 20% to 100% Im) 0.5% (V1, 20% to 100% Im on V2-V4) 5% (V2, V3, V4, 20% to 100% Im on V1) 25mV max RMS, 50mV max P-P, on V1= 5.0V with full load 0.5% max RMS, 1% max P-P, on V2,V3 & V4 with full load Line Regulation Load Regulation Cross Regulation Noise and Ripple .30 (7.62) 4.900 (124.46) 2.700 (68.58) Hold-up time Overvoltage Protection Threshold Power Limit Point Environmental Operating Temperature Range (full power) Operating Temperature Range (extended range) Storage Temperature Range Relative Humidity Range Vibration MTBF Weight .55 (13.97) 2.700 (68.58) 1.40* 35.56 .72 (18.29) 1.66 (42.16) .312 (7.92) TYP. Output (cont'd) Power-up Overshoot Transient Response 90-250Vac rated 81-265Vac operation8 47 to 63Hz 2A rms @ 90Vac input, 120W output 25A max, cold start @ 25C, 250Vac 75% typ at 115 Vac input, full power 0.98 typ @ 230 Vac, 120W output Input Frequency Input Operating Current Input Surge Current Efficiency Power Factor Output Output Power Limits V1 RETURN(V1,V2,V3) J1 1 GND 2 NEUT. 3 LINE J2 F1 FUSE T 2.5A 250VAC 14 6.00 (152.40) V2 RETURN V3 PIN REMOVED ISOLATED V4 OUTPUT V4 + MOUNTING HOLES 6-32 UNC 2B 6 PLACES 3.30 (83.82) 5% max, all outputs V1, for 25% to 75% Im change, 5% maximum deviation, with recovery to 1% within 500S 16mS min @ 115Vac input, 120W output 125% typical of Vout, all outputs 125% typical of max rated power 0C to 50C 0C to 70C Derate linearly from full power at 50C to half power at 70C 25C to 85C 5% to 95%, non-condensing 0.75G peak, 5Hz to 500Hz. Test three orthogonal axes at 1 octave/min, 5 min dwell at four major resonances 180,000 hours typical calculated per MIL STD 217F, at 30C ambient 1.12 lb (0.51kg) MOUNTING SURFACE, MAXIMUM INSERTION DEPTH .125 (3.18) .156 (3.96) TYP DIMENSIONS TOLERANCE INCHES (MM) +.03 (0.76 mm) .XX _ +.015 (0.38 mm) .XXX_ 4X #4 COUNTERSUNK HOLES FOR OPTIONAL COVER J1 CONNECTOR=MOLEX INC., 41671 SERIES, P/N: 26-48-1055. (MATING CONNECTOR=MOLEX INC.,6442 SERIES(OR 41695 SE P/N: 26-03-4050 (OR 09-50-8051)) *-OPTIONAL COVER ADDS 0.035(.89) TO HEIGHT. J2 CONNECTOR=MOLEX INC., 41671 SERIES, P/N: 26-48-1145. (MATING CONNECTOR=MOLEX INC., 6442 SERIES(OR 41695 SE P/N: 26-03-4141 (OR 09-50-8141)) (MATING CRIMP TERMINALS = MOLEX INC,6838 SERIES, P/N: 08-52-0113 OR 08-52-0112). C O R P O R A T I O N flexibility S E R I E S DP0201.23US *41920 Christy Street *Fremont, California Digital Power Corporation 41920 Christy Street,*94538-3158 Fremont, CA 94538-3158 *510-657-2635 sales@digipwr.com www.digipwr.com PH 510-657-2635 FAX 510-657-6634 Fax: 510-657-6634 sales@digipwr.com www.digipwr.com