SUNON [sercircarion FOR srrrovat. CUSTOMER DESCRIPTION AXIAL AC FAN DIMENSIONS 80X80X25 mm MODEL SF23080AT P/N 2082HBL.GN SUNON SPEC. NO. : A08000570G-00 APPROVAL NO. APPROVED BY (AUTHORIZED) DRAWN Hanna 5/10 CHECKED SPEC.NO A08000570G-00 ISSUE DATE |05.10.2005 APPROVED EDITION 0 | REVISION DATE \Zaty FaHE FE ST RIA Bl SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. 12FL., 120 CHUNG CHENG 1ST RD., KAOHSIUNG, TAIWAN, R.O.C. 2 NU E.SPEC EA80034__ TEL:886-7-7163069(41 LINES) FAX:886-7-7163086~89SUNON AXIAL AC FAN MODEL : SF23080AT P/N : 2082HBL.GN [ CHARACTERISTICS) 1. Motor Design : Reliable Shaded-Pole Motor Construction. 2. Insulation Resistance : 500 Megohms minimum at 500 VDC. 3. Dielectric Strength : 1500 VAC for one second. 4. Motor Protection : Impedance protected. 5. Noise Level : Measured in a semi-anechoic chamber with background noise level below 15 dB(A). The fan is running in free air with the microphone at a distance of one meter from the fan intake. 6. Tolerance > +15% on rated power and current. 7. Air Performance : Measured by a double chamber. The values are recorded when the fan speed has stabilized at rated voltage. AEE TSE SIRAA SPEC.NO | A08000570G-00 |REVISION DAKE Gen ees SUNONWEALTH ELECTRIC ISSUE DATE] 05.10.2005 [E D I T I O'N j0 MACHINE INDUSTRY CO., LTD. PAGE 2 OF 9SUNON SPECIFICATIONS | MODEL : SF23080AT P/N : 2082HBL.GN 1-1. Rated Voltage 1-2. Operating Voltage Range 1-3. Starting Voltage 1-4. Rated Speed 1-5. Air Delivery 1-6. Static Pressure 1-7. Rated Current 1-8. Rated Power 1-9. Noise Level 1-10. Direction of Rotation 1-11. Operating Temperature 1-12. Storage Temperature 1-13. Bearing System 1-14. Weight 1-15. Safety 1-16. Vibration 220-240 VAC 50/60 Hz 185-245 VAC 185 VAC 2450/2900 RPM + 10% 18/22 CFM 0.13/0.19 Inch-H20 0.07/0.07 AMP 14/13.5 WATTS 30/34.5 dB(A) Counter-clockwise viewed from front of fan blade -10 to +70 deg. C -40 to +70 deg. C Precision ball bearing system 260 g TUV/UL/CUR/CE Approvals Vibration of acceleration 1.5G and frequency 5~50~5Hz is applied in all 3 directions(X,Y,Z), in cycles of 1 minute each, for a total vibration time of 30 minutes. _ Fore ee RAR Bl SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. SPEC.NO _ {A08000570G-00 |REVISION DATR) ISSUE DATE | 05.10.2005 |EDIT I GNS}0 % So PY PAGE 3 OF 9 | 4 05 17 | |SUNON MODEL : SF23080AT P/N : 2082HBL.GN | PERFORMANCE CURVES STATIC PRESSURE mm-H20 Inch-H20 | 6 0.20 = 4 0.10 + 2 0 CFM 0 0 0.28 0.56 | | | m/min BEE TRY SAA SPEC.NO |A08000570G-00 [REVISIONDAH SUNONWEALTH ELECTRIC ISSUE DATE] 05.10.2005 JE DITIQO* 0 MACHINE INDUSTRY CO., LTD. PAGE 4 OF 9SUNON MATERIAL 2. Material 2-1. Frame : DIE-CAST ALUMINUM 2-2. Impeller : Thermoplastic PBT of UL 94V-0 2-3. Lead Wire : UL3266, 24 awg, GRAY | DIMENSIONS | WG OVATIO / UL3266 #24A RO en AIR FLOW iNT r GROUND LUG M4 . 3. 7+0.3 B8-G4.3 25.5240.5 Air Flow Direction: Toward label side. UNITS: mm EE SR TEN BER] SPEC.NO _|A08000570G-00 [REVISION DATE. car SUNONWEALTH ELECTRIC ISSUE DATE| 05.10.2005 JEDITI@N AAS a MACHINE INDUSTRY CO., LTD. | PAGE 5 OF 9 TUT IzSUNON [Notes | I. Safety 1.SUNON will not guarantee this product if your application exceeds the limitations outlined in this specification. 2.There is no thermo-protector installed in this product, such as thermo-fuse, or current-fuse or thermo-protector. There may be smoking, ignition, or electric shock by insulation degradation in cases of motor lock, motor lead short circuit, overload, over voltage, and/or other failure. Please add the protection circuit to your product. 3.There is no reverse-connection prevention diode of VDC (+) and GND (- ) installed in this product. Therefore, if VDC(+) and GND(- ) are reverse connected, it may cause smoking, ignition, and/or destruction, although these conditions may not manifest immediately. We recommend that a protection device be installed on your product when there is a possibility of reverse-connection. 4.Please verify that this product is being installed and used in compliance with all safety standards. Please inform SUNON of any safety concerns prior to releasing your product to production. 5.Please handle and install this product carefully. Hitting or dropping this product ' may cause damage. 6.Please do not damage this product including coil and lead wires while installing or wiring. There may be smoking or fire. FALE SE PT MERA SPEC.NO _ |A08000570G-00|REVISION DATE SUNONWEALTH ELECTRIC ISSUE DATE] 05.10.2005 JEDITION /-}6 MACHINE INDUSTRY CO.,LTD.| PAGE 6 OF 9SUNON I .Specification modification 1. SUNON offers engineering assistance on fan installation and cooling system design. 2. Any change to the parameters specified in this document will be determined by mutual agreement between both parties. Parameters which are not specified in this specification will be identical to the final sample which has been approved by your company. 3. Product will be shipped in accordance with this specification unless SUNON has been previously notified of parameters requiring exception. 4. Parameters modified by mutual consent will be incorporated in this specification. 5. Please notify SUNON in advance of any modification to your product or new application for this fan which may require a review of this specification. FMEA IRS A] SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. SPEC.NO A08000570G-00 ISSUE DATE] 05. 10. 2005 PAGE 7 OF 9 REVISION DATE it \ EDITION -}4__-SUNON Il . Other 1.When building your device, please examine thoroughly any variation of EMC, temperature rise, life data, quality, etc. of this product by shock/drop/vibration testing, etc. If there are any problems or accidents in connection with this product, it should be mutually discussed and examined. 2.Fan holders or bearings may be damaged if touched with fingers or other objects. Additionally, static electricity (ESD) may damage the internal circuits. Please handle this product carefully. 3.Please avoid operating SUNONs product in poisonous material (organic silicon, cyanogens, formalin, phenol, etc.) or corrosive gas environments (H2S, SO2, NO2, CI, etc). 4.SUNON does not warrant performance safety against accidents caused by dust, water, droplets, dew, bugs, etc. 5.Please advise us in advance if you require documents for export. 6.Improper mounting may cause harsh resonance, vibration, and noise. Please mount securely. - 7.Safety is a top priority. Please furnish guard accessories to prevent injury to personnel. 8.Unless otherwise noted, all tests are conducted at 25C ambient temperature and 65% relative humidity. . 9.Always ensure that fans are stored according to the storage temperatures specified. Do not store in a high humidity environment. If the fans are stored for more than 6 months, SUNON recommends functional testing before using. 10.SUNON reserves the right to use components with equivalent specifications from multiple sources. PLE EET SECA] SPEC.NO _|A08000570G-00|REVISION DATE SUNONWEALTH ELECTRIC ISSUE DATE] 05.10.2005 [EDITION (107! MACHINE INDUSTRY CO.,LTD.[ PAGE 8 OF 9SUNON [ Declaration of RoHS | Control declaration of environment- related substances/ materials 1. In accordance with the Restriction of Hazardous Substances (RoHS) Directive, Sunon product with P/N: GN models have complied with law and discipline not to employ the forbidden substances, and restrict the allowable concentration of some limited substances deliberately. in our components. 4 Substance 1 |Halogens & its compounds (Substances depleting the ozone layer) Forbidden 2 |Chlorinated Organic Solvent Forbidden Plastic (Frame, Impeller, wire harness, etc.) <100ppm Solder <1000ppm 3 |Lead and its compounds Iron Alloy <3500ppm . Aluminium Alloy <4000ppm Copper. Alloy <4wt% Solder <20ppm 4 |Cadmium and its compounds |Cadmium Alloy <100ppm Plastic